Studies on amidation and imidization processes of amine salts of aromatic tetracarboxylic acids and diamine

The amidation (A) and imidization (I) processes of several amine salts prepared from aromatic tetracarboxylic acids and diamine have been studied by means of thermal analysis (TG, DTA and DSC) and IR spectroscopy. The degrees of imidization (cyclization) of these salts, as estimated via thermal analysis under programmed heating, are 87–93%. The activation energies of these A–I processes, as determined from DSC curves, are 125 and 250 kJ mole⁻¹. From the thermal analysis curves and infrared absorption spectra, it appears that the amidation and imidization processes are superimposed, and the imidization process occurs before the completion of the amidation.     

The novel application of Fourier thermal analysis in foundry technologies

The process of casting in sand moulds is used for a large volume of castings manufactured in the world. Internal channels and complex geometries of these products are formed by the placement of cores within the mould cavity. Resin-bound sand mixtures are essential ingredients in engine component manufacturing. In this study, a state-of-the-art application of Fourier thermal analysis in foundry technologies is presented. Investigation of decomposition phenomena of resin-bound moulding materials during casting production is a brand new area to use the potential of thermal sciences. Temperature measurements in test samples of standard types of moulding mixtures were performed. The registered cooling curves were processed by a numerical iteration algorithm to determine the amount of heat absorbed during degradation of the moulding material. Thermogravimetric analysis (TG) and differential thermal analysis (DTA) of sand mixtures were carried out to compare the results of the Fourier thermal analysis with TG and DTA curves.     

Thermal stability and mechanical properties of sisal in cycle process

Differential thermal analysis (DTA) was the first thermal analysis technique used to qualitatively characterize natural clays and respective curves has been used since more than 60 years as their ‘fingerprint’. With the development of microprocessed equipments in the last decades, derivative thermogravimetric (DTG) curves also may be used for this purpose in some cases, which also may allow a quantitative characterization of clay components. TG and DTG curves are more indicated than DTA or DSC curves to identify and to better analyze the several decomposition steps of natural or synthetic organoclays. These questions are discussed in applications developed to characterize Brazilian kaolinitic clays, bentonites and organophilic clays.     

Thermal analysis of hectorite. Part II. Differential thermal analysis

The thermal behavior of the SHCa-1 hectorite source clay specimen was studied by the technique of computerized differential thermal analysis (DTA) using dynamic nitrogen, dynamic air, dynamic carbon dioxide, and static air atmospheres. The atmospheric dependence of the DTA thermal curves was established. A series of samples heated in dynamic nitrogen purge was analyzed by X-ray diffraction spectrographic techniques to establish the high temperature phases of the SHCa-1 (carbonate-contaminated) hectorite specimen. Differential thermal analysis was also performed on a processed (carbonate-cleaned) hectorite specimen using dynamic nitrogen atmosphere. Additional TG-DTG thermal curves were included in this portion of the study.     

Optimizing fitting parameters in thermogravimetry

This study presents an alternative to simple estimation of parametric fitting models used in thermal analysis. The addressed problem consists in performing an alternative optimization method to fit thermal analysis curves, specifically TG curves and their first derivatives. This proposal consists in estimating the optimal parameters corresponding to fitting kinetic models applied to thermogravimetric (TG) curves, using evolutionary algorithms: differential evolution (DE), simulated annealing and covariance matrix adapting evolutionary strategy. This procedure does not need to include a vector with the initial values of the parameters, as is currently required. Despite their potential benefits, the application of these methods is by no means usual in the context of thermal analysis curve’s estimation. Simulated TG curves are obtained and fitted using a generalized logistic mixture model, where each logistic component represents a thermal degradation process. The simulation of TG curves in four different scenarios taking into account the extent of processes overlapping allows us to evaluate the final results and thus to validate the proposed procedure: two degradation processes non-overlapped simulated using two generalized logistics, two processes overlapped, four processes non-overlapped and four processes overlapped two by two. The mean square error function is chosen as objective function and the above algorithms have been applied separately and together, i.e., taking the final solution of the DE algorithm is the initial solution of the remaining. The results show that the evolutionary algorithms provide a good solution for adjusting simulated TG curves, better than that provided by traditional methods.     

Thermal decomposition of complexes of antimony(III) bromide with hydrobromides of some aromatic amines

Thermal studies have been carried out on crystalline complexes formed between antimony(III) bromide and hydrobromides of some aromatic amines in concentrated hydrobromic acid solutions. Thermal analysis curves of the compounds under study are presented. Kinetic parameters of the thermal decomposition reactions were calculated from the TG curves using the Horowitz—Metzger method. A comparison of the thermal stabilities of the complexes was made.     

地开石热分解过程及非等温动力学研究

Fourier-transform infrared emission spectroscopy was used to study the dehydroxylation behavior of the thermal decomposition of dickite from Chenxi, Hunan Province, China. Dehydroxylation of dickite was followed by a loss of intensity of the 3620.73, 3695.34 cm-1 OH-stretching bands and 916.06, 1009.33 cm-1 OH bending bands. The thermal decomposition was investigated by thermogravimetric analysis (TGA). A good agreement is found with TG curves of dickite and the mass loss is 13.7% (close to the theoretical value). The non-isothermal kinetics of the thermal decomposition of dickite was studied in TG-DTG curves over the temperature range from 298 K to 1123 K by thermogravimetry and differential thermal analysis in air. Mathematical analysis of TG-DTG data using the integral methods (Coats-Redfern equation, HM equation, MKN equation) and differential method (Achar equation) shows that the thermal decomposition of dickite accords F2 mechanism. The kinetic parameters such as the activation energy (E=131.62 kJ/mol), pre-exponential factor (A=108.30 s-1) and reaction order (n=2.1) are reported. The Ozawa method was used to analyse the activation energy of the same sample at different heating rate and gave 133.07 kJ/mol. The kinetic parameters calculated from different equation are rather close to each other.     

Thermal analytic study of the adsorption of crystal violet by laponite

The adsorption of crystal violet on laponite was investigated by X-ray diffraction and thermal analysis. DTA, TG and DTG curves were recorded in air. The evolved H₂O, CO₂, NO₂, H₂ and C₂H₆ were simultaneously determined by mass spectrometry. The thermal analysis curves were compared on one hand with the thermal analysis curves of laponite and on the other hand with thermal analysis curves of non-adsorbed crystal violet and of crystal violet adsorbed on montmorillonite. The thermal analysis curves of crystal violet adsorbed on laponite show similarities to the curves of the non-adsorbed crystal violet, but differ from the curves of crystal violet adsorbed on montmorillonite. The differences in the thermal behaviour were attributed toπ interactions which do not occur between crystal violet and laponite but do occur between this dye and montmorillonite.     

A new model for the kinetic analysis of thermal degradation of polymers driven by random scission

In this paper, a series of f(α) kinetic equations able to describe the random scission degradation of polymers is formulated in such a way that the reaction rate of the thermal degradation of polymers that go through a random scission mechanism can be directly related to the reacted fraction. The proposed equations are validated by a study of the thermal degradation of poly(butylene terephthalate) (PBT). The combined kinetic analysis of thermal degradation curves of this polymer obtained under different thermal pathways have shown that the proposed equation fits all these curves while other conventional models used in literature do not.     

Thermal analysis of some metal n-benzoyl-n-phenylhydroxylamine chelates

The preparation and thermal analysis of the metal chelates of N-benzoyl-N-phenylhydroxylamine (BPHA) with Al(III), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Ni(II) and Zn(II) is discussed. The differential thermal analysis apparatus is described in detail. DTA and TGA curves of BPHA arid the chelates from 25 to 700° in oxygen and in nitrogen are presented.     

Constant rate thermal analysis for thermal stability studies of polymers

This paper explores the relationship between the shapes of temperature-time curves obtained from experimental data recorded by means of constant rate thermal analysis (CRTA) and the kinetic model followed by the thermal degradation reaction. A detailed shape analysis of CRTA curves has been performed as a function of the most common kinetic models. The analysis has been validated with simulated data, and with experimental data recorded from the thermal degradation of polytetrafluoroethylene (PTFE), poly(1,4-butylene terephthalate) (PBT), polyethylene (PE) and poly(vinyl chloride) (PVC). The resulting temperature-time profiles indicate that the studied polymers decompose through phase boundary, random scission, diffusion and nucleation mechanisms respectively. The results here presented demonstrate that the strong dependence of the temperature-time profile on the reaction mechanism would allow the real kinetic model obeyed by a reaction to be discerned from a single CRTA curve.     

Kinetic and Thermodynamic Parameters of the Thermal Decomposition of Some Metal Complexes of 4‐Benzamido‐3‐Thiosemicarbazone Derivatives

The kinetic and thermodynamic parameters such as reaction order, activation energy, enthalpy, free energy and entropy change related to the thermal decomposition of Co(II), Ni(II) and Cu(II) hydrazone complexes of 4‐benzamido‐1‐(4‐actylpyridine)‐3‐thiosemicarbazone (BACPT) and 4‐benzamido‐1‐(pyridine‐3‐aldehye)‐3‐thiosemicarb‐azone (BAPT) were evaluated from differential thermal analysis (DTA) curves using Thomas‐Clarke's method. The thermal stability of these complexes are discussed in relation to the nature of the metalion and of the ligand present. A suitable mechanism for the thermal decomposition process of the complexes based on the data of the thermogravimetric analysis (TGA) was suggested.     

Thermal characterization of the poultry fat biodiesel

Chemical composition of oils and fats used in the biodiesel synthesis can influence in processing and storage conditions, due to the presence of unsaturated fatty acids. An important point is the study of the biodiesel thermal stability to evaluate its quality using thermal analysis methods. In this study the thermal stabilities of the poultry fat and of their ethyl (BEF) and methyl (BMF) biodiesels were determined with the use of thermogravimetry (TG/DTG), differential thermal analysis (DTA) and differential scanning calorimetry (DSC), in different atmospheres. The TG/DTG curves of the poultry fat in synthetic air presented three decomposition steps while only one step was observed in nitrogen (N₂) atmosphere. The DSC results indicated four exothermic enthalpic transitions in synthetic air and an endothermic transitions in N₂ atmosphere attributed to the combustion process and to the volatilization and/or decomposition of the fatty acids, respectively. For both biodiesels the TG/DTG curves in air indicated two mass loss steps. In the DSC curves four exothermic transitions were observed in synthetic air besides an endothermic one in N₂ atmosphere.     

Thermal behavior of some antihistamines

Thermogravimetry (TG), differential scanning calorimetry (DSC), polarized light thermal microscopy (PLTM), as well as X-ray powder diffraction (XRD) and Fourier transformed infrared spectroscopy (FTIR) were used to study the thermal behavior and the chemical structure of cimetidine, famotidine, ranitidine-HCl, and nizatidine. The TG–DSC curves show that the famotidine and ranitidine-HCl suffer decomposition during melting and they are thermally less stable in comparison with cimetidine and nizatidine, the latter being the most stable of all the drugs studied in this study. The DSC curves of famotidine and ranitidine-HCl show exothermic peaks immediately after the melting, confirming the occurrence of thermal decomposition. The DSC curves also show that the cimetidine and nizatidine have some thermal stability after melting. The thermal events shown in the PLTM images are consistent with the results shown in the TG–DSC and DSC curves. The XRD patterns show that the cimetidine and famotidine are less crystalline compared with ranitidine-HCl and nizatidine. The theoretical FTIR bands are in agreement with those obtained experimentally, and in some cases, no difference is observed between the theoretical and experimental values, even being identical in one of the cases.     

DSC characterisation of compression moulded PEEK-PTFE plaques

Thermal behaviour of substituted monoazo dyes I-XVI, have been investigated by means of differential thermal analysis (DTA) and thermogravimetry (TG). The thermal stabilities of these dyes have been determined using the DTA and TG curves and the influence of the substituents and intramolecular hydrogen bonds on the DTA and TG curves of the dyes together with the melting points were also examined. This revised version was published online in July 2006 with corrections to the Cover Date.     

Simultaneous photothermal and differential thermal analysis

Simultaneous photothermal analysis (PTA), and differential thermal analysis (DTA) curves of inorganic compounds and organic polymers are presented. While the two techniques reinforce each other and provide complementary information, light emanating from the sample and detected by a photomultiplier tube provides features in the PTA thermograms not present in the DTA thermograms.     

Thermogravimetric study of some crosslinked copolymers based on poly(acrylonitrile-co-divinylbenzene)

Copolymer networks based on acrylonitrile (AN)/divinylbenzene (DVB) have been investigated by thermogravimetric analysis (TG) to evaluate their thermal stability in nitrogen atmosphere. Thermal stability was determined from TG-DTG curves to investigate the influence of AN and DVB in the synthesis of copolymers on the copolymer thermal properties. The TG and DTG curves of copolymers clearly show two thermodegradation stages. The solid residues produced after thermodegradation stages were analyzed by FTIR and elemental analysis (CHN). The decomposition temperatures were dependent on amount of AN and DVB used as the crosslinking agent. The degradation temperatures of copolymers were influenced by the diluent system during their synthesis. FTIR analyses indicate that the cyclization of the polymer proceeds before any mass loss.     

A thermoanalytical assessment of an organoclay

High resolution thermogravimetric analysis (TG) has attracted much attention in the synthesis of organoclays and its applications. In this study, organoclays were synthesised through ion exchange of a single cationic surfactant for sodium ions, and characterised by methods including X-ray diffraction (XRD) and TG. The changes of surface properties in montmorillonite (MMT) and organoclays intercalated with surfactant were determined using XRD through the changes in the basal spacing. The TG was applied in this study to investigate more information of the configuration and structural changes in the organoclays with thermal decomposition. There are four different decompositions steps in differential thermogravimetric curves. The obtained TG steps are relevant to the arrangement of the surfactant molecules intercalated in MMT and the thermal analysis indicates the thermal stability of surfactant modified clays. This investigation provides new insights into the properties of organoclays and is important in the synthesis and processing of organoclays for environmental applications.     

Thermal properties of chlorosulfonated polyethylene via gas–solid phase method

The thermal properties of chlorosulfonated polyethylene (CSM), which was prepared via gas–solid phase method, were studied in this article. The thermal curves were completely tested by differential thermal analysis, thermogravimetry, and differential thermogravimetry. The results showed that CSM 3550 and CSM 3570 prepared by gas–solid phase method had more excellent thermal properties (high initial/final temperature of degradation) than those via solution method, due to the uniform chlorine distribution of them in macromolecular chain. The differential scanning calorimetry curves showed that the transitions of CSM 3550 and CSM 3570 from glassy to the elastic state were also higher than those via solution method. Particularly, CSM 3570 was amorphous and no clear melting peak was observed during the melting process.