DSC Calibration During Cooling. A survey of possible compounds

A number of compounds is investigated for DSC calibration during cooling. Adamantane and Zn show fast reversible transitions and can be applied both for temperature and for heat calibrations. A third compound, namely 4,4’-azoxyanisole, has a liquid crystal to isotropic liquid transition at 409K. This compound can be used for temperature calibration. Heat calibration with this compound is more problematic because of the small heat effect and the construction of the baseline. Other compounds like NaNO₃, In, Hg and Pb, show a slight supercooling. Nevertheless they can be used for heat calibration. The use of large samples of NaNO₃ and In gives the possibility to construct the equilibrium onset temperatures of the cooling peaks, so these two compounds are also appropriate for temperature calibration on cooling. This revised version was published online in July 2006 with corrections to the Cover Date.     

配位化合物Zn(Met)3(NO3)2·H2O(s)(Met=L-α-蛋氨酸)的低温热容及标准摩尔生成焓

利用精密绝热热量仪测定了化合物配合物Zn(Met)₃(NO₃)₂·H₂O (s) (Met=L-α-蛋氨酸)在78-371 K温区的摩尔热容. 通过热容曲线解析, 得到了该配合物的起始脱水温度为T_D=325.10 K. 将该温区的摩尔热容实验值用最小二乘法拟合得到了摩尔热容(C_p)对约化温度(T)的多项式方程, 由此计算得到了配合物的舒平热容值和热力学函数值. 基于设计的热化学循环, 选择100 mL of 2 mol·L^-1 HCl为量热溶剂, 利用等温环境溶解-反应热量计, 得到了298.15 K配合物的标准摩尔生成焓为Δ_fH_m⁰[Zn(Met)₃(NO₃)₂·H₂O(s),s]=-(1472.65±0.76) J·mol^-1.     

DSC Investigation of some Testing and Calibration Compounds, Particularly During Cooling

Two compounds are described with interesting properties for use in DSC. The first compound is adamantane (C₁₀H¹⁶), with a reversible solid-solid transition at 208.62 K [1], suitable for DSC calibration at this low temperature [2]. The second compound is 4,4'-azoxyanisole (C₁₄H₁₄N₂O₃), with a liquid crystal range between 390 and 407 K [3]. This compound shows two transitions on heating, with a large heat effect at 390 K and a small heat effect at 407 K. For this reason, this substance is well suitable for testing the sensitivity and the resolution of DSC instruments [4]. For both compounds not only the heating, but also the cooling behaviour is investigated.This revised version was published online in November 2005 with corrections to the Cover Date.     

Analysis of hydrocarbons in coal and rock samples by on-line combination of thermodesorption,gas chromatography and mass spectrometry

Summary GC-MS analysis of hydrocarbons, thermally mobilized from rock and coal samples (“thermodesorption”) at 320°C, provides valuable and readily available information of organic geochemical significance. Two oil shale and three coal samples of different rank have been selected for this study. The molecular patterns of compound classes of various saturated and aromatic hydrocarbons are recorded here by employing mass chromatography of selected ions. The method described is of particular importance for the detection of those volatile constituents in coals and sedimentary rocks, which are usually not recovered during elaborate workup procedures (i.e. solvent extraction, liquid chromatography) due to evaporation losses.     

Determination of cyclo C6 and C7 peroxides and hydroperoxides by gas chromatography

Summary A method for determining cyclo C₆-C₇-peroxides and hydroperoxides by high-resolution capillary GC has been developed. The compounds were synthesized in the liquid phase and identified in chromatograms of the reaction mixture of cyclohexyl hydroperoxide and cycloheptane using GC-MS. Peroxy compounds were determined using an FID. The effective carbon number (ECN) concept was used to calculate response factors of the peroxy compounds analysed. The experimentally determined response factor for cyclohexyl hydroperoxide was identical (within error limits) with that calculated.     

Temperature calibration of an electrical compensation DSC on cooling using thermally stable high purity liquid crystals

Temperature calibration of DSCs is usually carried out on heating. In order to accurately control the temperature during cooling experiments, the calibration has to be carried out on cooling. Therefore, three high-purity, thermally stable liquid crystals were used to perform a temperature calibration of an electrcial compensation DSC on cooling. All three liquid crystals have several liquid crystalline phases, and they all were purified to a 99.9% lovel. Temoperatures of the isotropic to nematic or cholesteric and the mesophase to mesophase transitions were used. It was verified that these liquid crystals have sufficient thermal stability for carrying out the calibration on cooling. The dependence of the real temperature on the indicated temperature has been established for all the combinations of the heating and cooling rates of practical interest. It is also shown that the vant's Hoff equation can only be applied to the crystal to a liquid crystal transition, but not to the liquid crystal to liquid crystal or liquid crystal to isotropic transitions.     

Ho(NO3)3(C2H5O2N)4·H2O的低温热容和热力学函数

合成了稀土(钬, Ho)-氨基酸(甘氨酸, C₂H₅O₂N)二元配合物Ho(NO₃)₃(C₂H₅O₂N)₄·H₂O, 并且通过化学分析、元素分析和红外(IR)光谱对配合物进行了表征. 用高精度全自动绝热量热仪, 测定了该配合物在80-390 K温度区间的定压摩尔热容(C_p,m). 利用实验测定的热容数据, 采用最小二乘法, 将热容曲线上热容峰以外的两段平滑区的摩尔热容对折合温度进行拟合, 建立了热容随折合温度变化的多项式方程. 根据热容与焓、熵的热力学关系,计算出了配合物在80-390 K温度区间内,每隔5 K,相对于298.15 K的摩尔热力学函数(H_T,m-H_298.15,m)和(S_T,m-S_298.15,m). 通过热容曲线分析, 计算出了350 K附近转变过程的焓变(Δ_trsH_m)和熵变(Δ_trsS_m). 用差示扫描量热法(DSC)测定了配合物的热稳定性.     

Selective water sorbents for multiple applications, 7. Heat conductivity of CaCl2?SiO2 composites

In this communication we present experimental data on the low temperature heat conductivity of a consolidated bed made of the CaCl₂/SiO₂ composite material measured by the “hot wire method”. The conductivity appears to increase strongly with a raise of the sorbed water amount and reaches 0.53 W/m K at a high water content when the bed is completely saturated with the salt solution. λ values obtained appear to be much higher than those for zeolite 4A, which is a competitor solid adsorbent proposed for sorption cooling and heating machines. Finally, the influence of the thermal conductivity on the specific power of sorption heat pump based on the “CaCl₂/SiO₂-water” pair is briefly discussed.     

Self-Assembled Structures of Diglycerol Monolaurate- and Monomyristate in Olive Oil

We have investigated the phase behavior and self-assembled structures of diglycerol monolaurate-and monomyristate (abbreviated as C₁₂G₂ and C₁₄G₂, respectivley) in olive oil over a wide range of temperatures and compositions. At lower temperatures, both the surfactants appear in solid state (α-solid), which does not swell with olive oil. The α-solid transforms into lamellar liquid crystal (L_α) phase upon heating and the solid melting temperature is practically constant at all surfactant/oil compositions, but the C₁₂G₂ melts earlier than the C₁₄G₂. There appear the dispersions of L_α phase and α-solid in the dilute regions of the C₁₂G₂/olive oil and the C₁₄G₂/olive oil systems, respectively, at 25°C. The L_α phase can solubilize some amount of olive oil, but as the oil concentration increases the excess oil separates out from the L_α phase, and there appears L_α dispersion in the dilute surfactant concentration region. The L_α phase eventually transforms into isotropic solutions (reverse micelles) with further heating. The structures (shape and size) of the reverse micelles have been characterized by small-angle x-ray scattering technique. It has found that the C₁₂G₂ and C₁₄G₂ surfactants form reverse rod-like micelles in olive oil above the L_α melting temperature and the micellar size increases with surfactant concentration, but decreases with temperatures.     

Low-temperature heat-capacity and standard molar enthalpy of formation of copper l-threonate hydrate Cu(C4H6O5)·0.5H2O(s)

The solid copper l-threonate hydrate, Cu(C₄H₆O₅)·0.5H₂O, was synthesized by the reaction of l-threonic acid with copper dihydrocarbonate and characterized by means of chemical and elemental analyses, IR and TG-DTG. Low-temperature heat-capacity of the title compound has been precisely measured with a small sample precise automated adiabatic calorimeter over the temperature range from 77 to 390 K. An obvious process of the dehydration occurred in the temperature range between 353 and 370 K. The peak temperature of the dehydration of the compound has been observed to be 369.304 ± 0.208 K by means of the heat-capacity measurements. The molar enthalpy, Δ_dH_m, of the dehydration of the resulting compound was of 16.490 ± 0.063 kJ mol⁻¹. The experimental molar heat capacities of the solid from 77 to 353 K and the solid from 370 to 390 K have been, respectively, fitted to tow polynomial equations with the reduced temperatures by least square method. The constant-volume energy of combustion of the compound, Δ_cU_m, has been determined as being −1616.15 ± 0.72 kJ mol⁻¹ by an RBC-II precision rotating-bomb combustion calorimeter at 298.15 K. The standard molar enthalpy of formation of the compound, , has been calculated to be −1114.76 ± 0.81 kJ mol⁻¹ from the combination of the data of standard molar enthalpy of combustion of the compound with other auxiliary thermodynamic quantities.     

Quantitative determination of gas mixture composition by gas chromatography—New approach

Summary A new method has been developed for the quantitative determination of gas mixture composition where air penetration during gas sample collection would lead to erroneous results. It requires the use of a stationary phase that separates gas sample components and the air and involves 4–5 analyses of samples of equal volumes containing different amounts of air. By graphical extrapolation of the air peak area (S _air ) as a function of the peak areas of the individual components (S _comp ) the areas for these components in the absence of air can be obtained forS _air =0. Using calibration curves for the pure gas components the true quantitative composition of the gas mixture is estimated.     

镥晶体的绝热量热法测试和热力学函数

文章合成了Lu(NO₃)₃(C₂H₅O₂N)_4.H₂O,用红外和元素分析对其进行了表征。用高精度全自动绝热量热仪,测定了该配合物80-382 K温区的热容, 利用实验热容数据, 根据热容与焓、熵的热力学关系, 求出了配合物85-350 K温区内每隔5 K相对于298.15K的标准热力学函数(HT - H298.15)m和(ST - S298.15)m.在80-350 K温度区间内,配合物的热容随温度升高而增大,没有相转移点和热力学吸收峰的出现,该配合物在此温度区间内是稳定存在的。     

On the use of ionic liquids as mobile phase additives in high-performance liquid chromatography. A review

The popularity of ionic liquids (ILs) has grown during the last decades in several analytical separation techniques. Consequently, the number of reports devoted to the applications of ILs is still increasing. This review is focused on the use of ILs (mainly imidazolium-based associated to chloride and tetrafluoroborate) as mobile phase additives in high-performance liquid chromatography (HPLC). In this approach, ILs just function as salts, but keep several kinds of intermolecular interactions, which are useful for chromatographic separations. Both cation and anion can be adsorbed on the stationary phase, creating a bilayer. This gives rise to hydrophobic, electrostatic and other specific interactions with the stationary phase and solutes, which modify the retention behaviour and peak shape. This review updates the advances in this field, with emphasis on topics not always deeply considered in the literature, such as the mechanisms of retention, the estimation of the suppressing potency of silanols, modelling and optimisation of the chromatographic performance, and the comparison with other additives traditionally used to avoid the silanol problem.     

An improved Sampling Strategy for the Measurement of VOCs in Air,Based on Cooled Sampling and Analysis by Thermodesorption-GC-MS/FID

Abstract

Reliable and comprehensive sampling methods are required to obtain accurate data for VOC concentrations in air samples. The major drawback of the adsorption tube sampling method, widely employed in environmental studies, is the fact that C₂ compounds are usually not trapped quantitatively.

The focus of this work was thus to improve sampling based on adsorption tubes packed with Molsieve and Carbosieve. To improve the sampling efficiency for the C₂ compounds, a cooling device, based on Peltier cooling was constructed, which could be operated at a temperature down to ?30°C.

Experiments under laboratory and field conditions were carried out to study the influence of the sampling temperatuie on the recovery of ethane and ethene as the most volatile VOCs. The results clearly demonstrate the need for a cooled sampling device for the analysis of C₂ compounds in air. Under the investigated conditions, the recoveries with ambient temperature sampling were only in the range of 38–46% for ethane and 33–59% for ethene respectively, in comparison to the cooled sampling device. These findings are only valid for the described conditions and can change significantly with temperature and concentration. A generalisation of the recovery is thus very difficult to give.

The use of the sampling device for a field study is reported, where samples were collected simultaneously at three different altitudes in a diurnal profile on the slope of the Schulterberg mountain in Tyrol (Austria).     

Low-temperature heat capacities and thermodynamic properties of rare-earth triisothiocyanate hydrates (III) —Sm(NCS)3 · 6H2O, Gd(NCS)3 · 6H20, Yb(NCS)3 · 6H20 and Y(NCS)3 · 6H20

The heat capacities of four RE isothiocyanate hydrates, Sm(NCS)₃, · 6H₂0, Gd(NCS)₃ · 6H₂0, Yb(NCS)₃, · 6H₂O and Y(NCS)₃, · 6H₂0, have been measured from 13 to 300 K with a fully-automated adiabatic calorimeter. No obvious thermal anomaly was observed for the above-mentioned compounds in the experimental temperature ranges. The polynomial equations for calculating the heat capacities of the four compounds in the range of 13–300 K were obtained by the least-squares fitting based on the experimentalC _P, data. TheC _P, values below 13 K were estimated by using the Debye-Einstein heat capacity functions. The standard molar thermodynamic functions were calculated from 0 to 300 K. Gibbs energies of formation were also calculated. Project supported by the National Natural Science Foundation of China.     

Advantages to Conversion of Lattice Heat Capacity to Cv in the Resolution of Excess Properties The Ln2S3's as an example

This paper represents a fitting (modeling) of the temperature dependence of the Komada-Westrum characteristic temperature for those γ-, δ- and ε-phase lanthanide sesquisulfides for which the total heat capacities, including internal degrees of freedom (e.g., Schottky and magnetic contributions), were connected to the residue of only lattice vibrations yielding lattice heat-capacity contributions. These characteristic temperatures (θ_KW) at 298.15 K are seen to behave smoothly (nearly linearly) as a function of (cationic) atomic number within the region of stability of each phase as does the density. The trends between the phases also show some consistency but not predictability of one from the other. This revised version was published online in July 2006 with corrections to the Cover Date.     

Modeling phase equilibria of alkanols with the simplified PC-SAFT equation of state and generalized pure compound parameters

The simplified PC-SAFT equation of state has been applied to liquid–liquid, vapor–liquid and solid–liquid equilibria for mixtures containing 1- or 2-alkanols with alkanes, aromatic hydrocarbons, CO₂ and water. For the alkanols we use generalized pure compound parameters. This means that two of the physical pure compound parameters, m (segment number) and σ (segment diameter), are obtained from linear extrapolations, since m and mσ³, increase linearly with respect to the molar mass, and moreover, the two association parameters (association energy and association volume) were assumed to be constant for all alkanols. Only the dispersion energy is fitted to experimental data. Thus it is possible to estimate parameters for several 1- and 2-alkanols. The final aim is to develop a group contribution approach for PC-SAFT which is suitable for complex compounds, considering that the motivation of this project is to obtain a thermodynamic model which can be used in the development of sophisticated products such as pharmaceuticals, polymers, detergents or food ingredients. One of the severe limitations in applying SAFT-type equations of state to these compounds is that the procedure for obtaining the pure compound parameters is usually based on fitting to saturated vapor pressure and liquid density data over an extended temperature range. However, such data are rarely available for complex compounds. To verify the new pure compound parameters, comparisons to ordinary optimized alkanol parameters, where all five pure compound parameters were fitted to experimental liquid density and vapor pressure data, were made. The results show that the new generalized alkanol parameters from this work perform at least as well as other alkanol parameter sets.     

层状K4Ag2Sn3S9·2H2O的溶剂热合成与表征

用溶剂热法合成了K4Ag2Sn3S9·2H2O,通过单晶X射线衍射、DSC、TG、IR和紫外漫反射光谱等手段对其进行了表征.结果表明,K4Ag2Sn3S9·2H2O属单斜晶系,P21/m空间群,a=0.78071(2)nm,b=2.73508(1)nm,c=1.05008nm,α=90°,β=103.87(6)°,γ=90°,Z=4.其层状结构内具有一维孔道,钾离子分离在层间及层内孔道中.     

Vibrational spectra of α-Ge(HPO4)2·H2O compound

We have measured Raman and infrared spectra of α-Ge(HPO₄)₂·H₂O compound at room temperature. The analysis of vibrational modes indicated the presence of two non-equivalent HPO₄²⁻ units in agreement with ³¹P nuclear magnetic resonance measurements. A tentative assignment of all the observed modes is proposed based on the previous works reported for other hydrogenphosphate-based compounds.     

Thermal hazard evaluation of carbon nanotubes with sulfuric acid by DSC

Many concerns over unsafe or unknown properties of multi-walled carbon nanotubes (MWNTs) have been raised. The thermal characteristics regarding stability would represent potential hazards during the production or utilization stage and could be determined by calorimetric tests for various thermokinetic parameters. Differential scanning calorimetry (DSC) was employed to evaluate the thermokinetic parameters for MWNTs at various compositions. Thermoanalytical curves showed that the average heat of decomposition (ΔH _d) of the MWNTs samples in a manufacturing process was about 31,723 J g⁻¹, by identifying them as an inherently hazardous material. In this study, significant thermal analysis appeared in the presence of sulfuric acid (H₂SO₄). From the DSC experiments, the purification process of MWNTs could induce an unexpected reaction in the condition of batch addition with reactants of H₂SO₄. The results can be applied for designing emergency relief system and emergency rescue strategies during a perturbed situation or accident.