EFFICIENT AND SELECTIVE OXIDATION OF THIOLS TO DISULFIDES BY 1,4-DIAZABICYCLO[2.2.2]OCTANE-DI-N-OXIDE-DI-PERHYDRATE UNDER NEUTRAL AND HETEROGENEOUS CONDITIONS

1,4-Diazabicyclo[2.2.2]octane-di-N-oxide-di-perhydrate[3pc] selectively oxidizes thiols to disulfides in acetonitrile in good yields. The method is generally useful for a wide variety of thiols.     

Tandem Prins/Friedel–Crafts cyclization for stereoselective synthesis of heterotricyclic systems

Homoallylic substrates such as (E)-6-arylhex-3-enyl alcohols, N-tosylamides, and thiols undergo smooth cross-coupling with various aldehydes in the presence of 10 mol % Sc(OTf)(3) and 30 mol % TsOH to afford the trans-fused hexahydro-1H-benzo[f]isochromenes, N-tosyloctahydrobenzo[f]isoquinolines, and hexahydro-1H-benzo[f]isothiochromenes, respectively. However, the cross-coupling of (Z)-olefins such as 6-arylhex-3-enyl alcohols, N-tosylamides, and thiols with aldehydes affords the corresponding hexahydro-1H-benzo[f]isochromenes, N-tosyloctahydrobenzo[f]isoquinolines, and hexahydro-1H-benzo[f]isothiochromenes with complete cis selectivity via intramolecular Prins-, aza-Prins-, and thia-Prins/Friedel-Crafts cyclizations, respectively. Though the Prins cyclization proceeds smoothly under the influence of Sc(OTf)(3), high conversions and enhanced reaction rates are achieved using a mixture of Sc(OTf)(3) and TsOH (1:3).     

A general palladium-catalyzed coupling of aryl bromides/triflates and thiols

We have developed an efficient palladium-catalyzed carbon-sulfur bond formation reaction of aryl bromides, triflates, and activated aryl chloride. Using this protocol, we have shown tolerance to a wide variety of aryl thiols and alkyl thiols that can also be used as sulfide equivalents. [reaction: see text]     

Vinyl polymerization with metal ion redox systems as initiators,manganic laurate—thiol system

Polymerization of methyl methacrylate was studied using manganic laurate in the presence of organic thiols as initiators. The thiols used were 1-propane thiol and 2-propane thiol and the solvent was carbon tetrachloride. The rate of polymerization satisfied the expression R_P = k₁ [manganic laurate]^1/2 [thiol]^1/2 [monomer]^3/2 where k₁ is a constant. Spectroscopic investigations indicated complex formation between the monomer and manganic laurate. A reaction scheme is suggested.     

A general method for the formation of aryl-sulfur bonds using copper(I) catalysts

[reaction: see text] We report a mild, palladium-free synthetic protocol for the cross-coupling reaction of aryl iodides and thiols using 10 mol % CuI and 10 mol % neocuproine, with NaOt-Bu as the base, in toluene at 110 degrees C. Using this protocol, we have shown that a variety of aryl sulfides can be synthesized in excellent yields from readily available iodides and thiols.     

l-Proline promoted cross-coupling of vinyl bromide with thiols catalyzed by CuBr in ionic liquid

A method for the synthesis of vinyl sulfides by the coupling of vinyl bromides with thiols using the copper(I) bromide as catalyst and l-proline as ligand was reported. The best yields were obtained in the ionic liquid [Bmim]BF₄ with the retention of stereochemistry. This protocol is palladium-free, tolerates both aromatic and aliphatic thiols, possesses good selectivity between alcohol and thiol, and does not require the use of expensive or air-sensitive additives.     

2+2] photocycloadditions of thiomaleimides

Thiomaleimides, generated by the addition of bromomaleimides to thiols including cysteine, undergo highly efficient [2+2] photocycloadditions.     

Photoreactions between [60]fullerene and various aromatic tertiary amines

The photoreactions of [60]fullerene with aromatic tertiary amines such as N,N-dimethylaniline and N,N-dimethyl-1-naphthylamine gave two or three types of [60]fullerene adducts. The reaction efficiency in the series of p-substituted N,N-dimethylanilines remarkably increased with increasing electron-donating properties of aromatic tertiary amines employed.     

Lewis acid-catalyzed ring-opening reactions of methylenecyclopropanes with alcoholic or acidic nucleophiles

[reaction: see text] Methylenecyclopropanes can react with various nucleophiles such as alcohols, phenols, carboxylic acids, and thiols to give the corresponding homoallylic esters or ethers in good yields with good stereoselectivities in the presence of Lewis acids.     

Preparation of planar chiral amino phenols based on the [2.2]paracyclophane backbone

The synthesis of various planar and central chiral secondary and tertiary amino phenols based on the [2.2]paracyclophane backbone is described. Planar chiral tertiary amino phenols are prepared by reductive amination of 5-formyl-4-hydroxy[2.2]paracyclophane (FHPC) with secondary amines. The reduction of imine and ketimine precursors, as well as the 1,2-addition to these compounds is also described.     

Kinetics of the Catalytic Oxidation Reactions of Thiol Compounds in Aqueous Solutions in the Presence of Copper Ions

The kinetics of the catalytic oxidation reactions of thiol compounds with molecular oxygen in aqueous solutions in the presence of copper ions was studied in relation to the structures of oxidized thiols and the pH of the solution. A modified procedure used for the determination of [O₂] allowed us to obtain the kinetic characteristics of more than 30 thiols over a wide pH range. We found that weakly chelating thiols exhibited a first order of reaction with respect to [Cu⁺] and [O₂] under conditions when the [(Cu⁺)(RS^–)₂] complex occurred. In the oxidation of strongly chelating thiols in an alkaline medium, the order of reaction with respect to [Cu⁺] was equal to 2, and the rate of reaction was independent of [O₂]. We found that the introduction of small amounts of strongly chelating thiols into Cu⁺ solutions containing difficult-to-oxidize mercaptans resulted in a dramatic acceleration of mercaptan oxidation. We hypothesized that O₂ was effectively bound to the [(Cu⁺)(RS^–)₂] complexes in an alkaline medium in the case of strongly chelating thiols, and this was not the case with the complexes of weakly chelating thiols.     

High-performance liquid chromatography-fluorometry for the determination of thiols in biological samples using N-[4-(6-dimethylamino-2-benzofuranyl) phenyl]-maleimide

The selective determination of thiols in biological samples was investigated by high-performance liquid chromatography using N-[4-(6-dimethylamino-2-benzofuranyl)phenyl] maleimide, which was found to give fluorescent products when treated with certain thiols. Six kinds of thiol (reduced glutathione, cysteine, N-acetylcysteine, cysteamine, homocysteine and coenzyme A) could be separated simultaneously within ca. 12 min and determined at final level of sensitivity. The method was successfully applied to the determination of thiols in rat tissues and plasma and in human normal serum.     

Synthesis and applications of copillar[5]arene dithiols

Abstract

A novel copillar[4+1]arene incorporating alkylthiol substituents was synthesised in three steps and structurally characterised as the first example of a pillar[n]arene to incorporate two terminal thiols on the same aromatic ring. The macrocycle was attached to gold electrodes through a standard dipping technique. Cyclic voltammetry demonstrated selectivity for Li⁺ over other alkali metal cations. The copillar[4+1]arene was also used as a capping agent in the preparation of 3 nm gold nanoparticles.     

Rhodium-catalyzed reaction of thiols with polychloroalkanes in the presence of triethylamine

[reaction: see text] RhCl(PPh(3))(3) catalyzes a reaction of thiols with polychloroalkanes in the presence of triethylamine. This reaction serves as a convenient new method to produce formaldehyde dithioacetals, ethylenedithioethers, thioformates, and dithiocarbonic esters under mild conditions.     

Preparation of functionalized tertiary thiols and nitrosothiols

The development and preparation of five series of tertiary thiols and nitrosothiols as nitric oxide releasing molecules functionalized with acid, alcohol, or amine groups for future conjugation are reported.     

Existence of low-molecular-weight thiols in Caenorhabditis elegans demonstrated by HPLC-fluorescene detection utilizing 7-chloro-N-[2-(dimethylamino)ethyl]-2,1,3-benzoxadiazole-4-sulfonamide

A highly sensitive and simple method using HPLC-fluorescence detection with 7-chloro-N-[2-(dimethylamino)ethyl]-2,1,3-benzoxadiazole-4-sulfonamide (DAABD-Cl) as a fluorogenic reagent demonstrated the existence of the low-molecular-weight thiols in the extract of Caenorhabditis elegans (C. elegans). The method includes derivatization of the thiols with DAABD-Cl at 40 degrees C for 10 min in borate buffer (pH 9.0) containing TCEP, CHAPS and EDTA, separation of the derivatives on an ODS column and fluorometric determination of the derivatives at 510 +/- 15 nm with excitation at 400 +/- 15 nm. The identification of the thiols was made by HPLC-electrospray ionization mass spectrometry (LC-MS) following isolation of the derivatives using HPLC-fluorescence detection. Low-molecular-weight thiols were found to exist in the extract of C. elegans, such as cysteine, cysteinylglycine, gamma-glutamylcysteine, reduced glutathione and two other unidentified thiol compounds, confirming the existence of the 'glutathione cycle' in C. elegans similar to the mammalian body.     

A new fluorogenic thiol-selective reagent: N-{p-[2-(6-dimethylamino)benzofuranyl]phenyl}maleimide

N-{p-[2-(6-Dimethylamino)benzofuranyl]phenyl}maleimide (DBPM), has been synthesized and found to give fluorescent products when reacted with certain thiols. The reaction is very sensitive, and concentrations as low as 10(-9)M can be detected.     

Reactions of 2′-oxo-1′,2′-dihydrospiro[cyclopropane-1,3′-indole]-2,2,3,3-tetracarbonitriles with nucleophiles

2′-Oxo-1′,2′-dihydrospiro[cyclopropane-1,3′-indole]-2,2,3,3-tetracarbonitriles reacted with oxygencentered nucleophiles to form addition products at the cyano groups with conservation of the three-membered ring. Reactions of the title compounds with alcohols required the presence of base catalyst, and the products, 2-amino-4,4-dialkoxy-2′-oxo-1′,2′-dihydrospiro[3-azabicyclo[3.1.0]hex-2-ene-6,3′-indole]-1,5-dicarbonitriles, were converted into the corresponding 2-imino-2′,4-dioxospiro[3-azabicyclo[3.1.0]hexane-6,3′-indole]-1,5-dicarbonitriles and 2,2′,4-trioxospiro[3-azabicyclo[3.1.0]hexane-6,3′-indole]-1,5-dicarbonitriles by the action of acetic and sulfuric acids, respectively. The reactions with ketone oximes occurred in the absence of a catalyst, yielding 2-amino-4,4-bis(alkylideneaminooxy)-2′-oxo-1′,2′-dihydrospiro[3-azabicyclo[3.1.0]hex-2-ene-6,3′-indole]-1,5-dicarbonitriles. The reactions with thiols, aliphatic amines, and anilines were accompanied by opening of the three-membered ring. In the reactions with triphenylphosphine and thiols 2-(2-oxo-2,3-dihydro-1H-indol-3-ylidene)malononitrile was obtained, while morpholine and N,N-dimethylaniline gave rise, respectively, to 3,3-diaryl-and 3,3-dimorpholino-1H-indol-2(3H)-ones and tri- and dicyanoethylene derivatives.     

Convenient one-step synthesis of a medicinally relevant benzopyranopyridine system

Benzopyrano[2,3-b]pyridine is an important privileged medicinal scaffold. A three-component reaction of salicylaldehydes, thiols and 2 equiv of malononitrile that leads to the formation of a series of compounds incorporating 2,4-diamino-3-cyano-5-sulfanylbenzopyrano[2,3-b]pyridine framework is described. A proposed mechanism with the supporting experimental data is presented.     

A general,Brønsted acid-catalyzed hetero-Michael addition of nitrogen,oxygen, and sulfur nucleophiles

[reaction: see text] Strong Br?nsted acids such as bis(trifluoromethanesulfon)imide catalyze the hetero-Michael addition of carbamates, alcohols, and thiols to alpha,beta-unsaturated ketones, alkylidene malonates, and acrylimides. Scope, reaction rates, and yields are superior to comparable Lewis acid-catalyzed processes.