Synthesis of Benzo[c]thiophene Analogs Containing Benzimidazole,Benzothiazole, and Oxazole

Iodine-mediated cyclization of benzo[c]thiophene aldehyde with 1,2-diphenylamine/2-aminophenylthiol led to the formation of benzimidazole/benzothiazole-incorporated benzo[c]thiophenes. Similarly, reaction of benzo[c]thiophene aldehyde with p-toluenesulfonylmethyl isocyanide (TOSMIC) reagent in the presence of K₂CO₃ as a base furnished oxazole-containing benzo[c]thiophene analogs.     

Synthesis and characterization of benzo[c]thiophene analogs incorporating benzo[b]thiophene/1-hexylindole/benzo[b]furan

Synthesis of 1,3-disubstituted benzo[c]thiophene analogs incorporating heterocycles such as benzo[b]thiophene/1-hexylindole/benzo[b]furan and thiophene units is described. Optical and electrochemical studies of the benzo[c]thiophene analogs are also reported.     

Synthesis and characterization of fluorene tethered benzo[c]thiophene/benzo[c]selenophene analogs

Synthesis of 9,9-dialkyl/diarylfluorene based benzo[c]thiophene/benzo[c]selenophenes is presented. The synthesis of benzo[c]thiophene analogs is also realized with fluorene containing one or two thiophene units. The optical and electrochemical studies of fluorenyl benzo[c]heterocycles are correlated with their structures.     

Synthesis of 1,3-disubstituted benzo[c]thiophene analogs containing benzo[b]thiophene/benzo[b]pyrrole

The synthesis of 1,3-disubstituted benzo[c]thiophene analogs incorporating benzo[b]thiophene/benzo[b]pyrrole units is described.     

On the π‐Electron Distribution in Biphenylene Analogues

The bonding situation in a series of biphenylene analogues – benzo[b]biphenylene and its dication, 4,10‐dibromobenzo[b]biphenylene, naphtho[2,3‐b]biphenylene and its dianion, benzo[a]biphenylene, (biphenylene)tricarbonylchromium, benzo[3,4]cyclobuta[1,2‐c]thiophene, benzo[3,4]cyclobuta[1,2‐c]thiophene 2‐oxide, benzo[3,4]cyclobuta[1,2‐c]thiophene 2,2‐dioxide, 4,10‐diazabenzo[b]biphenylene, biphenylene‐2,3‐dione, benzo[3,4]cyclobuta[1,2‐b]anthracene‐6,11‐dione, and 3,4‐dihydro‐2H‐benzo[3,4]cyclobuta[1,2]cycloheptene – where one of the two benzo rings of biphenylene is replaced by a different π‐system (B) was investigated on the basis of the NMR parameters of these systems. From the vicinal ¹H,¹H spin‐spin coupling constants, the electronic structure of the remaining benzo ring (A) is derived via the Q‐value method. It is found that increasing tendency of B to tolerate exocyclic double bonds at the central four‐membered ring of these systems favors increased π‐electron delocalization in the A ring. The analysis of the chemical shifts supports this conclusion. NICS (nucleus‐independent chemical shift) values as well as C,C bond lengths derived from ab initio calculations are in excellent agreement with the experimental data. The charged systems benzo[b]biphenylene dication and naphtho[2,3‐b]biphenylene dianion ( 7 ²⁻) are also studied by ¹³C NMR measurements. The charge distribution found closely resembles the predictions of the simple HMO model and reveals that 7 ²⁻ can be regarded as a benzo[3,4]cyclobuta[1,2‐b]‐substituted anthracene dianion. It is shown that the orientation of the tricarbonylchromium group in complexes of benzenoid aromatics can be derived from the vicinal ¹H,¹H coupling constants.     

Angular polycyclic thiophenes containing two thiophene rings. I

We describe the synthesis of thieno[2,3-c]dibenzothiophene ( 6 ), thieno[3,2-c]dibenzothiophene ( 10 ), thieno-[3,2-a]dibenzothiophene ( 14 ), thieno[2,3-a]dibenzothiophene ( 16 ), benzo[1,2-b:4,3-b]bisbenzo[b]thiophene ( 18 ), benzo[1,2--6:3,4-b]bisbenzo[b]thiophene ( 20 ), benzo[2,1--6:3,4-b]bisbenzo[b]thiophene ( 22 ), benzo[1,2-b:3,4-g]bisbenzo[b]thiophene ( 27 ), benzo[1,2-b:4,3-e]bisbenzo[b]thiophene ( 29 ), benzo[2,1--6:3,4-g]bisbenzo[b]thiophene ( 36 ), benzo[2,1--6:4,3-e]bisbenzo[b]thiophene ( 38 ), benzo[1,2--6:4,3-g]bisbenzo[b]thiophene ( 41 ), benzo[1,2-b:4,5-g]bisbenzo[b]thiophene ( 42 ), benzo[1,2-b:3,4-e]bisbenzo[b]thiophene ( 44 ) and benzo-[1,2-b:5,4-e]bisbenzo[b]thiophene ( 45 ).     

The synthesis of novel polycyclic heterocyclic ring systems via photocyclization. 22 Dibenzo[f,h]benzothieno[2,3‐c]quinoline,dibenzo[f,h]benzothieno[2,3‐c][1,2,4]triazolo[4,3‐a]quinoline and dibenzo[f,h]naphtho[2′,1′:4,5]thieno[2,3‐c]quinoline

Photocyclization of 3‐chloro‐N‐(9‐phenanthryl)benzo[b]‐thiophene‐2‐carboxamide ( 3 ) and 3‐chloro‐N‐(9‐phenanthryl)‐naphtho[1,2‐b]thiophene‐2‐carboxamide ( 10 ) yielded dibenzo[f,h]benzothieno[2,3‐c]‐quinolin‐10(9H)‐one ( 4 ) and dibenzo[f,h]naphtho[2′,1′:4,5]thieno[2,3‐c]quinolin‐10(9H)‐one ( 11 ), respectively. Further elaboration of the lactams provided three novel unsubstituted new ring systems.     

Benzannelated analogs of phenanthro[1,2-b]- and [2,1-b]thiophene: Synthesis and structural characterization by two-dimensional NMR and X-ray techniques

Syntheses of benzo[3,4]phenanthro[1,2-b]thiophene, benzo[3,4]phenanthro[2,1-b]thiophene and their 1-methyl analogs are reported as potential constituents of solvent refined coal liquids and for mutagenicity testing. The attempted synthesis of the 13-methyl analogs which gave the 11-methyl isomers is also described. Total assignments of the ¹H- and ¹³C-nmr spectra based on long range optimized heteronuclear protoncarbon two-dimensional chemical shift correlation are reported. Carbon assignments obtained for benzo[3,4]-phenanthro[1,2-b]thiophene using this approach were confirmed with a 125 MHz ¹³C–¹³C INADEQUATE spectrum. X-Ray crystal structures were determined for benzo[3,4]phenanthro[1,2-b]thiophene and 1-methyl-benzo[3,4]phenanthro[2,1-b]thiophene. Both molecules were helically distorted from planarity. Close intramolecular contacts between the bay region H1–H13 and ClMe-H13 of 2.03 and 2.28 Å, respectively, were responsible for the distortions. There were no close intermolecular contacts of <3.5Å. both molecules refined to an R value of <0.05.     

Photochemical synthesis of heteroatom-containing polycyclic aromatic compounds

Anthra[2,1-b]furan, anthra[2,1-b]benzo[d]furan, anthra[2,1-b]thiophene, anthra[1,2-b]thiophene, anthra[2,1-b]benzo[d]thiophene, anthra[2,1-b]pyrrole and naphtho[2,3-c]carbazole derivatives were synthesized in fairly good yields by a one-pot photocycloaddition reaction of 2,3-disubstituted 1,4-naphthoquinone with 1,1-diarylethylene. This is the first reported synthesis of these aromatic compounds.     

Ru catalyzed cyclodimerization of bis(2‐thienyl)acetylene and bis(3‐thienyl)acetylene. Synthesis properties of 4,5,6‐tris(2‐thienyl)benzo(b)thiophene and 5,6,7‐tris(3‐thienyl)benzo[b]thiophene

Activated dihydridocarbonyltris(triphenylphosphine)ruthenium catalyzes the cyclodimerization of both bis(2‐thienyl)acetylene and bis(3‐thienyl)acetylene to yield, respectively, 4,5,6‐tris(2′‐thienyl)‐benzo[b]thiophene and 5,6,7‐tris(3′‐thienyl)benzo[b]thiophene. These fluoresce in the blue. Both undergo irreversible one electron oxidation at & sim1.1 mV versus Ag/Ag⁺ electrode, consistent with oxidation of the benzo[b]thiophene nuclei rather than the substituent thiophene rings.     

Efficient organic photovoltaic cells based on thiazolothiazole and benzodithiophene copolymers with π‐conjugated bridges

New donor–π–acceptor (D–π–A) type conjugated copolymers, poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(4‐octylthiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐tTz), and poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(6‐octylthieno[3,2‐b]thiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐ttTz) were synthesized and characterized with the aim of investigating their potential applicability to organic photovoltaic active materials. While copolymer PBDT‐tTz showed a zigzagged non‐linear structure by thiophene π‐bridges, PBDT‐ttTz had a linear molecular structure with thieno[3,2‐b]thiophene π‐bridges. The optical, electrochemical, morphological, and photovoltaic properties of PBDT‐tTz and PBDT‐ttTz were systematically investigated. Furthermore, bulk heterojunction photovoltaic devices were fabricated by using the synthesized polymers as p‐type donors and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester as an n‐type acceptor. PBDT‐ttTz showed a high power conversion efficiency (PCE) of 5.21% as a result of the extended conjugation arising from the thienothiophene π‐bridges and enhanced molecular ordering in the film state, while PBDT‐tTz showed a relatively lower PCE of 2.92% under AM 1.5 G illumination (100 mW/cm²). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1978–1988     

The synthesis of benzo[b]phenanthro[d]thiophenes and anthra[b]benzo[d]thiophenes

The synthesis of benzo[b]phenanthro[2, 3-d]thiophene ( 5 ), benzo[b]phenanthro[4, 3-d]thiophene ( 6 ), benzo-[b]phenanthro[2, 1-d]thiophene ( 9 ), benzo[b]phenanthro[3, 2-d]thiophene ( 14a ), anthra[1, 2-b]benzo[d]thiophene ( 24 ), anthra[2, 3-b]benzo[d]thiophene ( 29 ) and anthra[2, 1-b]benzo[d]thiophene ( 30 ) is described as well as the preparation of 13-methylbenzo[b]phenanthro[3, 2-d]thiophene ( 14b ).     

Synthesis of anthra[b]thiophenes and benzo[b]naphtho[d]thiophenes

All isomers of the parent anthra[b]thiophenes and benzo[b]naphtho[d]thiophenes, namely anthra[2,3-b]thio-phene, anthra[2,1-b]thiophene, anthra[1,2-b]thiophene, benzo[b]naphtho[2,3-d]thiophene, benzo[b]naphtho[2,1-d]thiophene and benzo[b]naphtho[1,2-d]thiophene were synthesized using a new procedure.     

Acylation and Cyclodehydration of Benzofuran-, Benzothiophene-, and Indolyl-3-acetic Acid Arylamides. Synthesis of Novel Benzofuro[2,3-c]-, Benzothieno[2,3-c], and Indolo[2,3-c]pyrilium and Pyridine Derivatives

The acylation of benzo[b]furan-, benzo[b]thiophene, and indolyl-3-acetic acid arylamides using acetic anhydride in the presence of 70% perchloric acid occurs at the -position of the heterocycle to give 2-acetylbenzo[b]furan-, 2-acetylbenzo[b]thiophene, and 2-acetylindolyl-3-acetic acid arylamides. Depending on the amount of perchloric used in the reaction they undergo cyclodehydration to 3-arylamino-1-methylhetero[2,3-c]pyrilium salts and to N-aryl-1-methyl-3(2H)hetero[2,3-c]pyridones.     

Benzo[c]thiophene–C60 Diadduct: An Electron Acceptor for p–n Junction Organic Solar Cells Harvesting Visible to Near‐IR Light

We synthesized a new 56‐π‐electron fullerene derivative through a Diels–Alder cycloaddition of benzo[c]thiophene that featured a relatively low temperature, closer to stoichiometric use of the diene, and easy product purification. The 56‐π‐electron benzo[c]thiophene diadduct ( BTCDA ) has a LUMO energy level of 0.09 to 0.18 eV higher than that of 58‐π‐electron fullerenes, and therefore, the BTCDA ‐based organic photovoltaic device exhibited a higher open‐circuit voltage and power‐conversion efficiency (PCE). When used with a binary‐donor system, including visible‐light‐harvesting tetrabenzoporphyrin ( BP ) and near‐IR‐harvesting titanyl phthalocyanine ( TiOPc ), the device had a PCE that was 1.5–3 times higher (2.8 %) than that for devices with BP or TiOPc alone because the binary‐donor device can utilize light between λ=350 and 950 nm.     

Tuning the Spectroscopic,Electrochemical, and Photovoltaic Properties of Triaryl Amine Based Sensitizers through Ring‐Fused Thiophene Bridges

The ring‐fused thiophene derivatives benzo[c]thiophene and its precursor bicyclo[2.2.2]octadiene (BCOD) have been introduced as π‐conjugated spacers for organic push–pull sensitizers with dihexyloxy‐substituted triphenylamine as donor and cyanoacrylic acid as acceptor ( OL1 , OL2 , OL3 , OL4 , OL5 , OL6 ). The effects of the fused ring on the spectroscopic and electrochemical properties of these sensitizers and their photovoltaic performance in dye‐sensitized solar cells have been evaluated. Introduction of a binary benzo[c]thiophene and ethylenedioxy thiophene as π bridge caused a significant red shift of the characteristic intramolecular charge‐transfer band to 642 nm. It is found that the sensitizer OL3 , which contains one benzo[c]thiophene unit as π linker, gives the highest overall conversion efficiency of 5.03 % among all these dyes.     

Synthesis of benzo[b]phenanthro[d]thiophenes

The synthesis of benzo[b]phenanthro[1,2-d]thiphene ( 1 ), benzo[b]phenanthro[4,3-d]thiophene ( 2 ), benzo-[b]phenanthro[2,1-d]thiophene ( 3 ) and benzo[b]phenanthro[3,4-d]thiophene ( 4 ) from appropriately substituted olefines by photochemical cyclodehydrogenation is described. The photolysis of olefin 9 gave a mixture of 4 and anthra[1,2-b]benzo[d]thiophene ( 5 ).     

Highly Efficient and Diastereoselective Construction of Tricyclic Pyrrolidine‐Fused Benzo[b]thiophene 1,1‐dioxide Derivatives via 1,3‐Dipolar [3 + 2] Cycloaddition

A rapid and highly efficient 1,3‐dipolar [3 + 2] cycloaddition of nonstabilized azomethine ylides generated in situ with benzo[b]thiophene 1,1‐dioxides as the dipolarophiles has been developed. The efficient method affords tricyclic pyrrolidine‐fused benzo[b]thiophene 1,1‐dioxide derivatives in high to excellent yields (up to 99%) with excellent diastereoselectivities (up to >25:1 dr) under mild reaction conditions. The structure of a typical product was confirmed by X‐ray crystallography.     

Synthesis and Structure–Property Relationships of 2,2′‐Bis(benzo[b]phosphole) and 2,2′‐Benzo[b]phosphole–Benzo[b]heterole Hybrid π Systems

The first comprehensive study of the synthesis and structure–property relationships of 2,2′‐bis(benzo[b]phosphole)s and 2,2′‐benzo[b]phosphole–benzo[b]heterole hybrid π systems is reported. 2‐Bromobenzo[b]phosphole P‐oxide underwent copper‐assisted homocoupling (Ullmann coupling) and palladium‐catalyzed cross‐coupling (Stille coupling) to give new classes of benzo[b]phosphole derivatives. The benzo[b]phosphole–benzo[b]thiophene and ‐indole derivatives were further converted to P,X‐bridged terphenylenes (X=S, N) by a palladium‐catalyzed oxidative cycloaddition reaction with 4‐octyne through the C_β? H activation. X‐ray analyses of three compounds showed that the benzo[b]phosphole‐benzo[b]heterole derivatives have coplanar π planes as a result of the effective conjugation through inter‐ring C? C bonds. The π–π* transition energies and redox potentials of the cis and trans isomers of bis(benzo[b]phosphole) P‐oxide are very close to each other, suggesting that their optical and electrochemical properties are little affected by the relative stereochemistry at the two phosphorus atoms. The optical properties of the benzo[b]phosphole–benzo[b]heterole hybrids are highly dependent on the benzo[b]heterole subunits. Steady‐state UV/Vis absorption/fluorescence spectroscopy, fluorescence lifetime measurements, and theoretical calculations of the non‐fused and acetylene‐fused benzo[b]phosphole–benzo[b]heterole π systems revealed that their emissive excited states consist of two different conformers in rapid equilibrium.     

Heck-like coupling and Pictet-Spengler reaction for the synthesis of benzothieno[3,2-c]quinolines

A series of 6-arylbenzothieno[3,2-c]quinolines were synthesised in three steps from benzo[b]thiophene. After a selective Heck-type coupling of benzo[b]thiophene with different o-nitroaryl bromides to obtain 2-(o-nitroaryl)benzo[b]thiophenes, corresponding 2-(benzo[b]thiophen-2-yl)anilines were involved in a Pictet-Spengler reaction to form the quinoline cycle.