Preparation of 1H‐1,2,3‐Triazoles by Cuprous Ion Mediated Cycloaddition of Terminal Alkyne and Sodium Azide

1H‐1,2,3‐triazoles can be prepared in good yield by the reaction of terminal alkyne and sodium azide in the presence of cuprous chloride at a temperature higher than 70°C. The alkyne is unactivated and the reaction has to be carried out under inert gas. At room temperature, the reaction first gives a Cu(I)‐azide complex which is converted to a Cu‐alkyne complex when the temperature is raised to higher than 70°C. The reaction of Cu(I)‐alkyne complex and azide ion dissociated from or coordinated to Cu(I) then gives 1H‐1,2,3‐triazoles.     

Synthesis of New 1,2,3‐Triazole Derivatives Possessing 4H‐Pyran‐4‐one Moiety by 1,3‐Dipolar Cycloaddition Reaction of Azidomethyl Phenylpyrone with Various Alkynes

A series of new 1,2,3‐triazole derivatives were synthesized by 1,3‐dipolar cycloaddition reaction of 2‐(4‐azidomethylphenyl)‐6‐phenyl‐4H‐pyran‐4‐one with different alkynes in 40–71% yields. In the case of terminal alkynes, the reaction was proceeded in the presence of Cu(I) catalyst. The structure of the synthesized compounds were confirmed by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy and elemental analysis.     

An Efficient Two‐Step Synthesis of New 5‐Substituted‐1H‐tetrazoles of Biological Interest

A simple procedure for the synthesis and characterization of new 3‐alkoxy‐3‐(1H‐tetrazol‐5‐yl)propionic acids and 2‐(1H‐tetrazol‐5‐yl)tetrahydrofuran‐ and ‐(1H‐tetrazol‐5‐yl)‐2H‐pyran‐3‐carboxylic acids from the [2 + 3] cycloaddition reactions between the nitrile group of β‐cyanocarboxylic acids with sodium azide in the presence of zinc chloride is described. The tetrazolic acids were isolated in moderate to good yields and are structurally analogous to succinic acid.     

An Efficient Synthesis of New 5‐(1‐Aryl‐1H‐pyrazole‐4‐yl)‐1H‐tetrazoles from 1‐Aryl‐1H‐pyrazole‐4‐carbonitriles via [3 + 2] Cycloaddition Reaction

A series of new 5‐(1‐aryl‐1H‐pyrazole‐4‐yl)‐1H‐tetrazoles 4a‐l were synthesized via [3 + 2] cycloaddition reaction from 1‐aryl‐1H‐pyrazole‐4‐carbonitriles 3a‐l , sodium azide and ammonium chloride, using dimethylformamide (DMF) as solvent, in good yields: 64–85%. The structures of these newly synthesized compounds were determined from the IR, ¹H‐ and ¹³C‐NMR spectroscopic data and elemental analyses.     

Cu/Graphene/Clay Nanohybrid: A Highly Efficient Heterogeneous Nanocatalyst for Synthesis of New 5‐Substituted‐1H‐Tetrazole Derivatives Tethered to Bioactive N‐Heterocyclic Cores

A series of new 5‐substituted 1H‐tetrazoles bearing bioactive N‐heterocyclic cores were synthesized through [3 + 2] cycloaddition reactions between alkyl nitriles (RCN) and NaN₃ in the presence of Cu/aminoclay/reduced graphene oxide nanohybrid (Cu/AC/r‐GO nanohybrid) as a heterogeneous nanocatalyst in water/i‐PrOH (50:50, V/V) media at reflux condition. The influence of factors on a sample reaction including solvent type, temperature, and catalyst amount was discussed. This current protocol has many advantages including inexpensiveness, environmentally benign, broad substrate scope, excellent yields, and easy work‐up procedure. The Cu/AC/r‐GO used in this protocol is a low‐cost catalyst that proved to have considerable chemical and thermal stabilities. This non‐hygroscopic catalyst can be easily recycled, reused, and stored for many consecutive reaction runs without significant loss in its reactivity.     

A Novel ‘Domino‐Click Approach’ to Unsymmetrical Bis‐1H‐1,2,3‐triazoles

Aryl azides 1 were treated with allenylmagnesium bromide ( 2 ) to generate 1,5‐disubstituted butynyl‐1H‐1,2,3‐triazoles 3 in a domino fashion, which upon Cu^I‐catalyzed 1,3‐dipolar cycloaddition with aryl azides 4 afforded novel bis‐1H‐1,2,3‐triazoles 5 in quantitative yields (Scheme 1 and Table).     

Syntheses of 1‐(4‐methylsulfonylphenyl)‐5‐aryl‐1,2,3‐triazoles and ‐(4‐aminosulfonylphenyl)‐5‐aryl‐1,2,3‐triazoles

Condensation of 4‐methylsulfonylaniline with aryl aldehyde in ethanol‐tetrahydrofuran afforded the imino compound 3 . 1,3‐Cycloaddtion of diazomethane with compound 3 followed by oxidazation of the triazoline 4 with potassium permanganate gave 1‐(4‐methylsulfonylphenyl)‐5‐aryl‐1,2,3‐triazoles 5 . Similarly, condensation of 4‐(N,N‐dibenzylaminosulfonyl)aniline with aryl aldehyde followed by 1,3‐cycloaddition of diazomethane with the imino compound 11 and the subsequent oxidation of triazoline 12 with potassium permanganate yielded the triazole 13 . Debenzylation of compound 13 with sulfuric acid gave the desired compound 1‐(4‐aminosulfonylphenyl)5‐aryl‐1,2,3‐triazoles 14 .     

Highly Efficient Ultrasonic‐Assisted CuCl‐Catalyzed 1,3‐Dipolar Cycloaddition Reactions in Water: Synthesis of Coumarin Derivatives Linked with 1,2,3‐Triazole Moiety

By introducing ultrasound irradiation into “on water” CuCl‐catalyzed 1,3‐dipolar Huisgen cycloaddition, the reaction efficiencies were notably promoted toward a wide variety of applicable azides and alkynes at room temperature, and a series of coumarin derivatives linked with 1,2,3‐triazole moiety were synthesized using the optimized conditions.     

An Efficient Synthesis of New Dispiropyrrolidine Derivatives via Three‐Component 1,3‐Dipolar Cycloaddition Reaction

A series of new dispiropyrrolidine derivatives were synthesized via the three‐component 1,3‐dipolar cycloaddition reaction of azomethine ylides generated in situ by the decarboxylative condensation of acenaphthenequinone and sarcosine or l ‐thioproline with 5‐benzylidene‐1,3‐dimethylpyrimidine‐2,4,6‐trione. The structures of the products were identified by IR, ¹H‐NMR, and HRMS spectra.     

Highly Enantioselective Intramolecular 1,3‐Dipolar Cycloaddition: A Route to Piperidino‐Pyrrolizidines

Enantioselective catalytic intermolecular 1,3‐dipolar cycloadditions are powerful methods for the synthesis of heterocycles. In contrast, intramolecular enantioselective 1,3‐dipolar cycloadditions are virtually unexplored. A highly enantioselective synthesis of natural‐product‐inspired pyrrolidino‐piperidines by means of an intramolecular 1,3‐dipolar cycloaddition with azomethine ylides is now reported. The method has a wide scope and yields the desired cycloadducts with four tertiary stereogenic centers with up to 99 % ee. Combining the enantioselective catalytic intramolecular 1,3‐dipolar cycloaddition with a subsequent diastereoselective intermolecular 1,3‐dipolar cycloaddition yielded complex piperidino‐pyrrolizidines with very high stereoselectivity in a one‐pot tandem reaction.     

Synthesis of 1,5‐Benzodiazepine Derivatives Containing 1,2,3‐Triazole Moiety via 1,3‐Dipolar Cycloaddition Reaction

A series of 1,5‐benzodiazepine derivatives were synthesized by the reaction of 1,5‐benzodiazepine containing 1,2,3‐triazole moiety with benzohydroximinoyl chlorides at room temperature. The structural identities of these novel compounds were confirmed on the basis of IR, ¹H NMR, mass spectral and elemental analysis data, and by X‐ray crystallographic analysis of a typical example of the new class of 1,5‐benzodiazepine analogs.     

A General and Highly Selective Palladium‐Catalyzed Hydroamidation of 1,3‐Diynes

A chemo‐, regio‐, and stereoselective mono‐hydroamidation of (un)symmetrical 1,3‐diynes is described. Key for the success of this novel transformation is the utilization of an advanced palladium catalyst system with the specific ligand Neolephos. The synthetic value of this general approach to synthetically useful α‐alkynyl‐α, β‐unsaturated amides is showcased by diversification of several structurally complex molecules and marketed drugs. Control experiments and density‐functional theory (M06L‐SMD) computations also suggest the crucial role of the substrate in controlling the regioselectivity of unsymmetrical 1,3‐diynes.     

Efficient Atropodiastereoselective Access to 5,5′‐Bis‐1,2,3‐triazoles: Studies on 1‐Glucosylated 5‐Halogeno 1,2,3‐Triazoles and Their 5‐Substituted Derivatives as Glycogen Phosphorylase Inhibitors

Whereas copper‐catalyzed azide–alkyne cycloaddition (CuAAC) between acetylated β‐D ‐glucosyl azide and alkyl or phenyl acetylenes led to the corresponding 4‐substituted 1‐glucosyl‐1,2,3‐triazoles in good yields, use of similar conditions but with 2 equiv CuI or CuBr led to the 5‐halogeno analogues (>71 %). In contrast, with 2 equiv CuCl and either propargyl acetate or phenyl acetylene, the major products (>56 %) displayed two 5,5′‐linked triazole rings resulting from homocoupling of the 1‐glucosyl‐4‐substituted 1,2,3‐triazoles. The 4‐phenyl substituted compounds (acetylated, O‐unprotected) and the acetylated 4‐acetoxymethyl derivative existed in solution as a single form (d.r.>95:5), as shown by NMR spectroscopic analysis. The two 4‐phenyl substituted structures were unambiguously identified for the first time by X‐ray diffraction analysis, as atropisomers with aR stereochemistry. This represents one of the first efficient and highly atropodiastereoselective approaches to glucose‐based bis‐triazoles as single atropisomers. The products were purified by standard silica gel chromatography. Through Sonogashira or Suzuki cross‐couplings, the 1‐glucosyl‐5‐halogeno‐1,2,3‐triazoles were efficiently converted into a library of 1,2,3‐triazoles of the 1‐glucosyl‐5‐substituted (alkynyl, aryl) type. Attempts to achieve Heck coupling to methyl acrylate failed, but a stable palladium‐associated triazole was isolated and analyzed by ¹H NMR and MS. O‐Unprotected derivatives were tested as inhibitors of glycogen phosphorylase. The modest inhibition activities measured showed that 4,5‐disubstituted 1‐glucosyl‐1,2,3‐triazoles bind weakly to the enzyme. This suggests that such ligands do not fit the catalytic site or any other binding site of the enzyme.     

An Efficient and Convenient Synthesis of Ethyl 1‐(4‐Methoxyphenyl)‐5‐phenyl‐1H‐1,2,3‐triazole‐4‐carboxylate

The “click chemistry” of using organic azides and terminal alkynes is arguably the most efficient and straightforward route to the synthesis of 1,2,3‐triazoles. In this paper, an alternative and direct access to ethyl 1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐1,2,3‐triazole‐4‐carboxylate is described. Treatment of ethyl diazoacetate with 4‐methoxyaniline derived aryl imines in the presence of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene provided fully substituted 1,2,3‐triazoles in good to high chemical yields. The base‐mediated reaction tolerates various substituted phenyl imines as well as ethyl diazoacetate or the more bulky diazoacetamide. A reasonable mechanism is proposed that involves the addition of an imine nitrogen atom to the terminal nitrogen atom of the diazo compound, followed by aromatization to give the 1,2,3‐triazole. The presence of the 4‐carboxy group is advantageous as it can be easily transformed into other functional groups.     

CBr4： A Useful and Efficient Catalyst for One-Pot Synthesis of 4-Substituted-1,4,5,6,7,8-Hexahydroquinolin-5-ones Via Hantzsch Reaction

A carbon tetrabromide （CBr4） catalyzed one-pot synthesis of 4-substituted-1,4,5,6,7,8-hexahydroquinolin-5-one derivatives via a Hantzsch reaction under mild conditions was described.