Combined experimental and computational modeling studies on 4‐[(2‐hydroxy‐3‐methylbenzylidene) amino]‐1,5‐dimethyl‐2‐phenyl‐1,2‐dihydro‐3H‐pyrazol‐3‐one

The Schiff base compound, 4‐[(2‐hydroxy‐3‐methylbenzylidene)amino]‐1,5‐dimethyl‐2‐phenyl‐1,2‐dihydro‐3H‐pyrazol‐3‐one, has been synthesized and characterized by IR, UV–vis, and X‐ray single‐crystal determination. Molecular geometry from X‐ray experiment of the title compound in the ground state have been compared using the density functional method (B3LYP) with 6‐31G(d,p) basis set. Calculated results show that density functional theory (DFT) can well reproduce the structure of the title compound. The energetic behavior of the title compound in solvent media has been examined using B3LYP method with the 6‐31G(d,p) basis set by applying the Onsager and the polarizable continuum model (PCM). The results obtained with these methods reveal that the PCM method provided more stable structure than Onsager's method. By using TD‐DFT method, electronic absorption spectra of the title compound have been predicted and a good agreement with the TD‐DFT method and the experimental one is determined. The predicted nonlinear optical properties of the title compound are much greater than ones of urea. In addition, DFT calculations of the title compound, molecular electrostatic potential and NBO analysis were performed at B3LYP/6‐31G(d,p) level of theory. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Ab initio and semiempirical computational studies on 1‐{(2E)‐2‐[(aminocarbonothioyl)hydrazono]‐2‐(3‐mesityl‐3‐methylcyclobutyl)ethyl}‐pyrrolidine‐2,5‐dione

The molecular geometry, vibrational frequencies, and gauge including atomic orbital (GIAO) ¹H‐ and ¹³C NMR chemical shift values of the title compound in the ground state have been calculated using the Hartree‐Fock (HF) and density functional theory (DFT) methods with 6‐31G(d) basis sets, and compared with the experimental data. The calculated results show that the optimized geometries can well reproduce the crystal structural parameters and the theoretical vibrational frequencies, and ¹H‐ and ¹³C NMR chemical shift values show good agreement with experimental data. To determine conformational flexibility, the molecular energy profile of the title compound was obtained by semiempirical (AM1) calculations with respect to the selected torsion angle, which was varied from ?180° to +180° in steps of 10°. The energetic behavior of the title compound in solvent media was examined using the B3LYP method with the 6‐31G(d) basis set by applying the Onsager and the polarizable continuum model (PCM). The results obtained with these methods reveal that the PCM method provided more stable structure than Qnsager's method. By using TD‐DFT method, electronic absorption spectra of the title compound have been predicted and a good agreement with the TD‐DFT method and the experimental one is determined. The predicted nonlinear optical properties of the title compound are much greater than ones of urea. In addition, the molecular electrostatic potential (MEP), frontier molecular orbitals (FMO) analysis, NBO analysis and thermodynamic properties of the title compound were investigated using theoretical calculations. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Synthesis of 1‐(3,4‐dimethoxyphenylmethyl)‐3‐phenyl‐6,7,8‐trimethoxy‐3,4‐dihydroisoquinoline

In an attempt to ascertain the scope of using ethyl polyphosphate in the Bischler‐Napieralsky annelation reaction, a title compound was synthesized and reduced to the respective 1‐(3,4‐dimethoxyphenylmethyl)‐3‐phenyl‐6,7,8‐trimethoxy‐1,2,3,4‐tetrahydroisoquinoline.     

Photohydrodimerization of 6‐Methoxyflavone to 6,6″‐Dimethoxy‐2,2″‐Biflavanones

6‐Methoxyflavone ( 7 ) easily afforded two hydrodimers of rac‐6,6Prime;‐dimethoxy‐2,2″‐biflavanone ( 8a ) and meso‐6,6″‐dimethoxy‐2,2″‐biflavanone ( 8b ) and one reductive product of 6‐methoxyflavanone ( 9 ) by using photolysis with the electron‐donating amines including triethylamine, 2‐(N,N‐dimethylamino)ethanol or N,N‐dimethylaniline in solvents of acetonitrile, benzene or methylene dichloride. They were found to give higher yields of rac‐6,6″‐dimethoxy‐2,2″‐biflavanone ( 8a ) and meso‐6,6″‐dimethoxy‐2,2″‐biflavanone ( 8b ) (38.7% and 4.5%, 35.3% and 6.2%, respectively) in the reaction conditions of 1/10 molar ratio of 6‐methoxy‐flavone ( 7 ) to triethylamine in a solvent of acetonitrile with irradiation of twenty‐four hours by using 306 nm and 352 nm lamps.     

5‐Bromo‐2,3‐dihydro‐4‐methyl‐3‐nitrothiophene 1,1‐dioxide

The title compound, C₅H₆BrNO₄S, crystallizes in the centrosymmetric space group P2₁/c. Three weak C—H⃛O hydrogen bonds dominate the packing of the mol­ecules in the solid. These weak hydrogen bonds and a short intermolecular O⃛Br contact of 3.003 (2) Å are discussed using a Mulliken population analysis.     

Polymorphism of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐ and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐ones

This study of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐2H‐chromen‐2‐one, C₁₇H₁₀N₂O₃, 1 , and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐one, C₁₆H₉N₃O₃, 2 , was performed on the assumption of the potential anticancer activity of the compounds. Three polymorphic structures for 1 and two polymorphic structures for 2 have been studied thoroughly. The strongest intermolecular interaction is stacking of the `head‐to‐head' type in all the studied crystals. The polymorphic structures of 1 differ with respect to the intermolecular interactions between stacked columns. Two of the polymorphs have a columnar or double columnar type of crystal organization, while the third polymorphic structure can be classified as columnar‐layered. The difference between the two structures of 2 is less pronounced. Both crystals can be considered as having very similar arrangements of neighbouring columns. The formation of polymorphic modifications is caused by a subtle balance of very weak intermolecular interactions and packing differences can be identified only using an analysis based on a study of the pairwise interaction energies.     

Synthesis and Antioxidant Properties of New Substituted 8‐Methyl‐6‐phenyl‐5,6‐dihydro‐4H‐1,3,2‐benzodioxaphosphocine‐2‐oxide Derivatives

A new route for the synthesis of substituted 8‐methyl‐6‐phenyl‐5,6‐dihydro‐4H‐1,3,2‐benzodioxaphosphocine‐2‐oxide derivatives has been developed by using cinnamic acid and p‐cresol via condensation, reduction, and followed by phosphorylation steps. The title compounds were characterized by IR, ¹H, ¹³C, ³¹P, and mass spectral studies and elemental analysis. The title compounds have been investigated for their antioxidant activity with respect to their IC₅₀ values using 2,2‐diphenyl‐1‐picrylhydrazyl, NO radical scavenging activities, and reducing power assay. The results obtained from the aforementioned methods revealed that 2‐phenylamino derivatives have shown greater free radical scavenging activity when compared with those of the phenoxy derivatives and is attributed to the presence of secondary amino group, which is able to produce free radicals easily.     

Synthesis of 9‐[2‐(2‐hydroxymethyl‐2‐methyl‐, ‐(2‐acetoxymethyl‐2‐methyl‐, ‐(2,2‐di(hydroxymethyl)‐, and ‐(2,2‐Di(acetoxymethyl)‐1,3‐dioxan‐5‐yl)ethyl] derivatives of guanine and 2‐aminopurine

Synthesis of 9‐[2‐(2‐hydroxymethyl‐2‐methyl‐, ‐(2‐acetoxymethyl‐2‐methyl‐, ‐(2,2‐di(hydroxymethyl)‐, and ‐(2,2‐di(acetoxymethyl)‐1,3‐dioxan‐5‐yl)ethyl] derivatives of guanine and 2‐aminopurine, 2–9 , has been accomplished in seven to eight step sequences from readily available 1‐(tert‐butyldiphenylsilyloxy)‐acetone, 1,3‐di(tert‐butyldiphenylsilyloxy)acetone, and the diol 10 . Formation of cyclic ketals 11 and 12 was carried out successfully under an acidic condition using a catalytic amount of methanesulfonic acid along with excess anhydrous copper(II) sulfate in toluene. Subsequent reactions of desilylation, acetylation, hydrogenolysis, and bromination afforded the key intermediates 19 and 20 , which were coupled with 2‐amino‐6‐chloropurine to produce the purine compounds 21 and 22 in good yields. Guanine derivatives 2–5 were obtained from 21 and 22 by hydrolysis and acetylation, while the dechlorination and hydrolysis of 21 and 22 yielded the 2‐aminopurine compounds 6–9 .     

1,1′‐Nitramino‐5,5′‐bitetrazoles

1,1′‐Dinitramino‐5,5′‐bitetrazole and 1,1′‐dinitramino‐5,5′‐azobitetrazole were synthesized for the first time. The neutral compounds are extremely sensitive and powerful explosives. Selected nitrogen‐rich salts were prepared to adjust sensitivity and performance values. The compounds were characterized by low‐temperature X‐ray diffraction, IR and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and DTA/DSC. Calculated energetic performances using the EXPLO5 code based on calculated (CBS‐4M) heats of formation and X‐ray densities support the high performances of the 1,1′‐dinitramino‐5,5′‐bitetrazoles as energetic materials. The sensitivities toward impact, friction, and electrostatic discharge were also explored. Most of the compounds show sensitivities in the range of primary explosives and should only be handled with great care!     

Conformation of 17‐chloro‐16‐formylandrosta‐5,16‐dien‐3β‐yl acetate and 17‐chloroandrosta‐5,16‐dien‐3β‐yl acetate

In the title compounds, C₂₂H₂₉ClO₃, (I), and C₂₁H₂₉ClO₂, (II), respectively, the B rings adopt a half‐chair conformation and the D rings adopt an envelope conformation. A twist of the steroid skeleton of both compounds is observed. There is a positional disorder of the acetoxy group of (II), with the terminal atoms disordered over two positions with near equal occupancy. Quantum‐mechanical ab initio calculations using a molecular orbital Hartree–Fock method were performed for the isolated molecules, thus allowing the distinction within the structural features of these two androstane derivatives of which characteristics are intrinsic to the molecules and which are due to packing effects. The skeletal twisting was found to be innate to the molecules, while the acetoxy disorder is due to packing effects.     

Copper‐catalyzed Synthesis of N‐alkylated 2‐(4‐substituted‐1H‐1,2,3‐triazol‐1‐yl)‐1H‐indole‐3‐carbaldehyde by Step‐wise and One‐pot Three‐component Huisgen's 1,3‐dipolar Cycloaddition Reaction

An efficient method for the synthesis of N‐alkylated 2‐(4‐substituted‐1H‐1,2,3‐triazol‐1‐yl)‐1H‐indole‐3‐carbaldehyde has been developed starting from oxindole and indole using Huisgen's 1,3‐dipolar cycloaddition reaction of organic azides to alkynes. The effect of catalysts and solvent on these reactions has been investigated. Among all these conditions, while using CuSO₄·5H₂O, DMF was found to be the best system for this reaction. It could also be prepared in a one‐pot three‐component manner by treating equimolar quantities of halides, azides, and alkynes. The Huisgen's 1,3‐dipolar cycloaddition reaction was performed using CuSO₄·5H₂O in DMF with easy work‐up procedure.     

Synthesis,structure and biological activity of new 6,6‐dimethyl‐2‐oxo‐4‐{2‐[5‐organylsilyl(germyl)]furan(thiophen)‐2‐yl}vinyl‐5,6‐dihydro‐2H‐pyran‐3‐carbonitriles

New 6,6‐dimethyl‐2‐oxo‐4‐{2‐[5‐alkylsilyl(germyl)]furan(thiophen)‐2‐yl}vinyl‐5,6‐dihydro‐2H‐pyran‐3‐carbonitriles (IC₅₀: 1–6 µg ml^?1) have been prepared by the condensation of corresponding silicon‐ and germanium‐containing furyl(thienyl)‐2‐carbaldehydes with 3‐cyano‐4,6,6‐trimethyl‐5,6‐dihydropyran‐2‐one using piperidine acetate as a catalyst. The obtained carbonitriles were identified using NMR (¹H, ¹³C and ²⁹Si) spectroscopy and GC‐MS. The structure of 6,6‐dimethyl‐2‐oxo‐4‐[2‐(5‐trimethylsilyl)thiophen‐2‐yl]‐5,6‐dihydro‐2H‐pyran‐3‐carbonitrile was studied using X‐ray diffractometry. The influences of the heterocycle and the structure of the organoelement substituent on cytotoxicity and on matrix metalloproteinase inhibition have been studied. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis, Crystal Structure and Biological Activities of O, O-Dialkyl α-[1-（2-Chlorothiazol-5-ylmethyl）-5-methyl- 1 H-1,2,3-triazol-4-ylcarbonyloxy]alkylphosphonates

In order to search for novel agrochemicals with high activity and low toxicity, a series of phosphonate derivatives containing 1,2,3-triazole and thiazole rings were designed and synthesized using 2-chloro-5-（chloromethyl）- thiazole as the starting material. Their structures were confirmed by IR, ^1H NMR, ^31p NMR, EI-MS or ESI-MS and elemental analyses. The crystal structure of 7a was determined by single crystal X-ray diffraction. Preliminary bioassays indicated that most of the target compounds did not display insecticidal activities, but a fraction of them possessed herbicidal and fungicidal activities to some extent.     

Experimental and quantum chemical calculational studies on N‐[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐N′‐pyridin‐3ylmethylene‐hydrazine

The title molecule, N‐[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐N′‐pyridin‐3ylmethylene‐ hydrazine (C₂₀ H₂₀ N₄ S₁), was characterized by ¹H‐NMR, ¹³C‐NMR, IR, UV‐visible, and X‐ray determination. In addition to the molecular geometry from X‐ray experiment, the molecular geometry, vibrational frequencies and gauge including atomic orbital ¹H‐ and ¹³C‐NMR chemical shift values of the title compound in the ground state have been calculated using the Hartree‐Fock and density functional method (B3LYP) with 6‐31G(d, p) basis set. The calculated results show that optimized geometries can well reproduce the crystal structural parameters. By using time‐dependent density functional theory method, electronic absorption spectrum of the title compound has been predicted. © 2011 Wiley Periodicals, Inc.     

Synthesis of 5‐methyl‐4‐oxo‐2‐(coumarin‐3‐yl)‐N‐aryl‐3,4‐dihydrothieno[2,3‐d]‐pyrimidine‐6‐carboxamides

Possible approaches to synthesis of 5‐methyl‐4‐oxo‐2‐(coumarin‐3‐yl)‐N‐aryl‐3,4‐dihydrothieno[2,3‐d]pyrimidine‐6‐carboxamides 4 have been discussed. It is shown that the preferable approach is cyclization of 2‐iminocoumarin‐3‐carboxamides 1 , utilizing 5‐amino‐3‐methyl‐N²‐arylthiophene‐2,4‐dicarboxamides 2 as binucleophilic reagents. The proposed procedure allowed us to easily obtain 4 in two stages, using common reagents. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:341–346, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20303     

5‐(3,4‐Dimethoxybenzyl)‐7‐isopropyl‐1,3,5‐triazepane‐2,6‐dione acetonitrile solvate refined using a multipolar atom model

The crystal structure of the title compound, C₁₆H₂₃N₃O₄·CH₃CN, was refined using a multipolar atom model transferred from an experimental electron‐density database. The refinement showed some improvement in crystallographic statistical indices compared with the independent atom model. The triazepane ring adopts a twist‐boat conformation. In the crystal structure, the molecule forms intermolecular contacts with 14 different neighbours. There are two N—H...O and one C—H...O intermolecular hydrogen bond.     

Synthesis and Antimicrobial Screening of 2‐Aryl‐5‐((2‐arylthiazol‐4‐yl)methyl)‐1,3,4‐oxadiazole Derivatives

A new series of 2‐aryl‐5‐((2‐arylthiazol‐4‐yl)methyl)‐1,3,4‐oxadiazole derivatives was synthesized by condensation of 2‐(2‐substituted thiazol‐4‐yl)acetohydrazide with aryl aldehydes followed by oxidative cyclocondensation using iodobenzene diacetate. The structure of synthesized compounds was characterized by IR, NMR, and mass analysis. All the newly synthesized compounds were evaluated for their in vitro antimicrobial activity. Some of the compounds showed moderate antimicrobial activity.     

Luminescence properties of soluble 2,2′,7,7′‐Tetrakis(2‐(9‐hexyl‐9H‐carbazol‐3‐yl)‐vinyl)‐9,9′‐spirobifluorene‐labeled dendrimers: Photoluminescence and electroluminescence

New light emitting dendrimers were synthesized by reacting 3,5‐bis‐(3,5‐bis‐benzyloxy‐benzyloxy)‐benzoic acid or 3,5‐bis‐[3,5‐bis‐(3,5‐bis‐benzyloxy‐benzyloxy)‐benzyloxy]‐benzoic acid with a carbazolyl vinyl spirobifluorene moiety. A blue‐emitting core dye was encapsulated by multibenzyloxy dendrons, and two dendrimers having different densities of dendrons were prepared. Photoluminescence (PL) studies of the dendrimers demonstrated that at the higher density of benzyloxy dendrons, the featureless vibronic transitions were improved, causing lesser excimer emission. The similarity of the solution and solid emission spectra of the larger dendrimer, 10 , revealed the suppression of molecular aggregation in the solid film, which is attributed to the presence of the bulky benzyloxy dendrons. The electroluminescence spectra of multilayered devices made using 10 predominantly exhibited blue emissions; similar emission was observed in the PL spectra of its thin film. The multilayered devices made using 3 , 9 , and 10 showed luminances of 1021 cd m^?2 at 5 V, 916 cd m^?2 at 6 V, and 851 cd m^?2 at 6.5 V, respectively. The largest dendrimer, 10 , bearing a greater number of benzyloxy dendrons, exhibited a blue‐like emission with CIE 1931 chromaticity coordinates of x = 0.16 and y = 0.13, which is due to the influence of a higher shielding effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 501–514, 2008     

Microwave‐assisted nucleophilic cleavage of 5,7‐dimethyl‐2‐phenyl‐1‐oxo‐lH‐pyrazolo[ 1,2‐a]pyrazol‐4‐ylium‐3‐olate to α‐phenylmalonamides

Three α‐phenylmalonamides have been prepared by the selective nucleophilic cleavage of 5,7‐dimethyl‐2‐phenyl‐1‐oxo‐1H‐pyrazolo[1,2‐a]pyrazol‐4‐ylium‐3‐olate in solventless microwave syntheses. The three weak nucleophiles employed were aniline, p‐chloroaniline and m‐toluidine. The α‐phenylmalonamides of these three aniline derivatives could not be prepared using the previously reported solvent syntheses via 3‐oxopyrazolo[1,2‐a]pyrazol‐8‐ylium‐1‐olates. All products were characterised using, infrared spectroscopy, ¹H nmr and electrospray mass spectrometry. The single crystal X‐ray structures of the starting pyrazolo‐[1,2‐a]pyrazole and α‐phenylmalon‐m‐toluidide are also reported.     

Phosphosulfonic acid‐catalyzed green synthesis and bioassay of α‐aryl‐α′‐1,3,4‐thiadiazolyl aminophosphonates

A series of new α‐aminophosphonates containing 1,3,4‐thiadiazole moiety (4a–l) were synthesized via a simple, efficient, and one‐pot three‐component Kabachnik–Fields reaction of 2‐amino‐5‐ethyl‐1,3,4‐thiadiazole with various aryl/heteroaryl aldehydes and diethylphosphite under solvent‐free microwave irradiation conditions using phosphosulfonic acid, as a reusable and heterogeneous solid acid catalyst. All the title compounds were screened for radical scavenging activity by DPPH and H₂O₂ methods, and antimicrobial activity against bacteria (Gram‐positive and Gram‐negative) and fungi using the disc diffusion technique. They exhibited potent in vitro antioxidant and moderate antimicrobial activity.