Framework engineering by anions and porous functionalities of Cu(II)/4,4'-bpy coordination polymers

A combination of framework-builder (Cu(II) ion and 4,4'-bipyridine (4,4'-bpy) ligand) and framework-regulator (AF(6) type anions; A = Si, Ge, and P) provides a series of novel porous coordination polymers. The highly porous coordination polymers ([Cu(AF(6))(4,4'-bpy)(2)].8H(2)O)(n)(A = Si (1a.8H(2)O), Ge (2a.8H(2)O)) afford robust 3-dimensional (3-D), microporous networks (3-D Regular Grid) by using AF(6)(2-) anions. The channel size of these complexes is ca. 8 x 8 A(2) along the c-axis and 6 x 2 A(2) along the a- or b-axes. When compounds 1a.8H(2)O or 2a.8H(2)O were immersed in water, a conversion of 3-D networks (1a.8H(2)O or 2a.8H(2)O) to interpenetrated networks ([Cu(4,4'-bpy)(2)(H(2)O)(2)].AF(6))(n)(A = Si (1b) and Ge (2b)) (2-D Interpenetration) took place. This 2-D interpenetrated network 1b shows unique dynamic anion-exchange properties, which accompany drastic structural conversions. When a PF(6)(-) monoanion instead of AF(6)(2)(-) dianions was used as the framework-regulator with another co-counteranion (coexistent anions), porous coordination polymers with various types of frameworks, ([Cu(2)(4,4'-bpy)(5)(H(2)O)(4)].anions.2H(2)O.4EtOH)(n)(anions = 4PF(6)(-) (3.2H(2)O.4EtOH), 2PF(6)(-) + 2ClO(4)(-) (4.2H(2)O.4EtOH)) (2-D Double-Layer), ([Cu(2)(PF(6))(NO(3))(4,4'-bpy)(4)].2PF(6).2H(2)O)(n)(5.2PF(6).2H(2)O) (3-D Undulated Grid), ([Cu(PF(6))(4,4'-bpy)(2)(MeCN)].PF(6).2MeCN)(n)(6.2MeCN) (2-D Grid), and ([Cu(4,4'-bpy)(2)(H(2)O)(2)].PF(6).BF(4))(n) (7) (2-D Grid), were obtained, where the three modes of PF(6)(-) anions are observed. 5.2PF(6).2H(2)O has rare PF(6)(-) bridges. The PF(6)(-) and NO(3)(-) monoanions alternately link to the Cu(II) centers in the undulated 2-D sheets of [Cu(4,4'-bpy)(2)](n)() to form a 3-D porous network. The free PF(6)(-) anions are included in the channels. 6.2MeCN affords both free and terminal-bridged PF(6)(-) anions. 3.2H(2)O.4EtOH, 4.2H(2)O.4EtOH, and 7 bear free PF(6)(-) anions. All of the anions in 3.2H(2)O.4EtOH and 4.2H(2)O.4EtOH are freely located in the channels constructed from a host network. Interestingly, these Cu(II) frameworks are rationally controlled by counteranions and selectively converted to other frameworks.     

Discrete and monodimensional heteropolynuclear structures formed by tetracarboxylatodiruthenium(II,III) and perrhenato fragments

Reaction between cationic units of carboxylate-bridged diruthenium complexes [Ru(2)(mu-O(2)CR)(4)](+) (R = Me, CMePh(2), CMe(3), CH(2)CH(2)OMe, C(Me)=CHEt, C(6)H(4)-p-OMe, Ph) and tetrabutylammonium perrhenate gives complexes with different arrangements in the solid state. Thus, the compounds Ru(2)(mu-O(2)CR)(4)(ReO(4)) [R = Me (1), CMePh(2) (2), CMe(3) (3), CH(2)CH(2)OMe (4), C(Me)=CHEt (5), C(6)H(4)-p-OMe (6), Ph (7)] have polymeric structures with the diruthenium units linked by perrhenate ligands in the axial positions. The structures of complexes 3.THF and 4 were established by single-crystal X-ray diffraction. The tetrahedral geometry of the ReO(4)(-) anion permits the formation of a chain close to the linearity. In contrast to the polymeric chains observed in complexes 1-7, the reaction of [Ru(2)(mu-O(2)CPh)(4)](+) with NBu(4)ReO(4) also affords the compounds Ru(2)(mu-O(2)CPh)(4)(ReO(4))(H(2)O) (8) and NBu(4)[Ru(2)(mu-O(2)CPh)(4)(ReO(4))(2)] (9) depending on the reaction conditions. The structure of 8 consists of cationic and anionic units, [Ru(2)(mu-O(2)CPh)(4)(H(2)O)(2)](+) and [Ru(2)(mu-O(2)CPh)(4)(ReO(4))(2)](-), linked by hydrogen bonds, which give a three-dimensional net. The structure of complex 9.0.5H(2)O has an anionic unit similar to that of 8, whose counterion is NBu(4)(+). The Ru-Ru bond distances are slightly longer in [Ru(2)(mu-O(2)CPh)(4)(ReO(4))(2)](-) than in the polymeric compounds Ru(2)(mu-O(2)CR)(4)(ReO(4)). The magnetic behavior owes to the existence of zero-field splitting (ZFS) and a weak antiferromagnetic coupling. The experimental data are fitted with a model that considers the ZFS effect using the Hamiltonian (D) = SDS. The weak antiferromagnetic coupling is introduced as a perturbation, using the molecular field approximation.     

Rhenium(V) oxo complexes with N-heterocyclic carbenes

Air-stable rhenium(V) oxo complexes are formed when [ReOCl(3)(PPh(3))(2)] is treated with N-heterocyclic carbenes of the 1,3-dialkyl-4,5-dimethylimidazol-2-ylidene type, L(R) (R = Me, Et, i-Pr). Complexes of the compositions [ReO(2)(L(R))(4)](+), [ReOCl(L(R))(4)](2+), or [ReO(OMe)(L(R))(4)](2+) can be isolated depending on the alkyl substituents at the nitrogen atoms of the ligands and the reaction conditions applied. Despite the steric overcrowding of the equatorial coordination spheres of the metal atoms by each of the four carbene ligands, stable complexes with six-coordinate rhenium atoms are obtained. Steric demands of the alkyl groups allow control of the stability of the mono-oxo intermediates. Air-stable cationic complexes of the compositions [ReOCl(L(Me))(4)](2+), [ReOCl(L(Et))(4)](2+), and [ReO(OMe)(L(Me))(4)](2+) have been isolated, whereas reactions of [ReOCl(3)(PPh(3))(2)] or other rhenium(V) precursors with the more bulky 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (L(i)(-)(Pr)) directly yield the dioxo complex [ReO(2)(L(i)(-)(Pr))(4)](+). X-ray structures of [ReO(2)(L(i)(-)(Pr))(4)][ReO(4)], [ReO(2)(L(i)(-)(Pr))(4)][PF(6)], [ReO(2)(L(Me))(4)][ReO(4)](0.45)[PF(6)](0.55), [ReO(MeOH)(L(Me))(4)][PF(6)](2), and [ReOCl(L(Et))(4)][PF(6)](2) show that the equatorial coordination spheres of the rhenium atoms are essentially planar irrespective of the steric demands of the individual carbene ligands.     

Spectroscopic evidence for the direct coordination of the pertechnetate anion to the uranyl cation in [UO2(TcO4)(DPPMO2)2]+

We report the synthesis and structural characterization of [UO(2)(ReO(4))(DPPMO(2))(2)][ReO(4)] and [UO(2)(Cl)(DPPMO(2))(2)][Cl] (where DPPMO(2) = bis(diphenylphosphino)methane dioxide). In both complexes, the linear uranyl dication is coordinated to two bidentate DPPMO(2) ligands in the equatorial plane with one coordinated and one non-coordinated anion (either perrhenate or chloride). We have also prepared the pertechnetate analogue, and, through (31)P and (99)Tc NMR, we have shown that the cation, [UO(2)(TcO(4))(DPPMO(2))(2)](+), is stable in solution.     

Synthesis, structures, and properties of ruthenium(II) complexes of N-(1,10-phenanthrolin-2-yl)imidazolylidenes

Mononuclear ruthenium complexes [RuCl(L1)(CH(3)CN)(2)](PF(6)) (2a), [RuCl(L2)(CH(3)CN)(2)](PF(6)) (2b), [Ru(L1)(CH(3)CN)(3)](PF(6))(2) (4a), [Ru(L2)(CH(3)CN)(3)](PF(6))(2) (4b), [Ru(L2)(2)](PF(6))(2) (5), [RuCl(L1)(CH(3)CN)(PPh(3))](PF(6)) (6), [RuCl(L1)(CO)(2)](PF(6)) (7), and [RuCl(L1)(CO)(PPh(3))](PF(6)) (8), and a tetranuclear complex [Ru(2)Ag(2)Cl(2)(L1)(2)(CH(3)CN)(6)](PF(6))(4) (3) containing 3-(1,10-phenanthrolin-2-yl)-1-(pyridin-2-ylmethyl)imidazolylidene (L1) and 3-butyl-1-(1,10-phenanthrolin-2-yl)imidazolylidene (L2) have been prepared and fully characterized by NMR, ESI-MS, UV-vis spectroscopy, and X-ray crystallography. Both L1 and L2 act as pincer NNC donors coordinated to ruthenium (II) ion. In 3, the Ru(II) and Ag(I) ions are linked by two bridging Cl(-) through a rhomboid Ag(2)Cl(2) ring with two Ru(II) extending to above and down the plane. Complexes 2-8 show absorption maximum over the 354-428 nm blueshifted compared to Ru(bpy)(3)(2+) due to strong σ-donating and weak π-acceptor properties of NHC ligands. Electrochemical studies show Ru(II)/Ru(III) couples over 0.578-1.274 V.     

Liquid-liquid distribution of ion-associates of dichlorocuprate(I) with quaternary ammonium counter-ions

The dichlorocuprate(I) anion CuCl(-)(2) can be extracted as its ion-associates Q(+).CuCl(-)(2) with quaternary ammonium cations (Q(+)) into chloroform. The extraction constants K(ex) have been determined, and the log K(ex) values found for the various counter-ions used are 1.93 for (C(3)H(7))(4)N(+), 4.10 for (C(4)H(9))(4)N(+), 6.57 for (C(5)H(11))(4)N(+), 1.57 for C(8)H(17)N(+) (CH(3))(3), 2.83 for C(10)H(21)N(+) (CH(3))(3) 4.12 for C(12)H(25)N(+) (CH(3))(3) and 5.21 for C(14)H(29)N(+)(CH(3))(3), respectively. A linear relationship was found between log K(ex) and the total number of carbon atoms in Q(+); from the slope of the line, the contribution of a methylene group to log K(ex) was calculated to be 0.59. The extractability with alkyltrimethylammonium cations was larger than that with symmetrical tetra-alkylammonium cations and the difference in log K(ex) for two cations (one of each type) with the same number of carbon atoms was about 0.4. From the extraction constants obtained, the extractability of CuCl(-)(2) was found to lie between that of ReO(-)(4) and ClO(-)(4).     

The coordination of perrhenate and pertechnetate to thorium(IV) in the presence of phosphine oxide or phosphate ligands

A series of thorium(IV) perrhenato- and pertechnetato-complexes with P[double bond, length as m-dash]O donor ligands have been prepared and characterised both in the solid state and in solution. Isostructural complexes of general formula [Th(MO(4))(4)(L)(4)], where M = Re or Tc and L = triethylphosphate (TEP) (2 and 7), tri-iso-butylphosphate (TiBP) (3 and 8) and tri-n-butylphosphine oxide (TBPO) (4 and 9) have been prepared from the novel starting materials [Th(ReO(4))(4)] x 4H(2)O (1) and [Th(TcO(4))(4)] x 4H(2)O (6). The reaction of or with triphenylphosphine oxide (TPPO) in MeOH has also led to the synthesis of [Th(MO(4))(3)(TPPO)(3)(OCH(3))(HOCH(3))] (M = Re (5) or Tc (10)). While the structural characterisation of 4 and 9 has been previously described, we report for the first time the structural characterisation of 2 and 5, with a partial structural refinement of 3. Vibrational spectroscopic analysis confirms that the Tc complexes not characterised by single crystal X-ray diffraction are indeed isostructural with the perrhenate complexes with the same P[double bond, length as m-dash]O donor ligand. In all cases, monodentate coordination of the Group 7 tetraoxo anion is observed. (31)P NMR spectroscopy indicates that in all the phosphine oxide-based complexes there is one dominant solution species. For the phosphate based systems, the presence of pertechnetate appears to inhibit P[double bond, length as m-dash]O donor ligand complexation in solution, whereas a significant proportion of each phosphate remains coordinated to Th(IV) when perrhenate is present as the counter ligand. These results give some indication as to the mechanism of pertechnetate co-extraction with tetravalent cations in the presence of tri-n-butyl phosphate in the Plutonium and Uranium Recovery by Extraction (PUREX) process.     

Structural, spectroscopic, and electrochemical properties of tri- and tetradentate N3 and N3S copper complexes with mixed benzimidazole/thioether donors

Cupric and cuprous complexes of bis(2-methylbenzimidazolyl)(2-methylthiophene)amine (L(1)), bis(2-methylbenzimidazolyl)benzylamine (L(2)), bis(2-methylbenzimidazolyl)(2,4-dimethylphenylthioethyl)amine (L(3)), bis(1-methyl-2-methylbenzimidazolyl)benzylamine (Me(2)L(2)), and bis(1-methyl-2-methylbenzimidazolyl)(2,4-dimethylphenylthioethyl)amine (Me(2)L(3)) have been spectroscopically, structurally, and electrochemically characterised. The thioether-containing ligands L(3) and Me(2)L(3) give rise to complexes with Cu-S bonds in solution and in the solid state, as evidenced by UV-vis spectroscopy and X-ray crystallography. The Cu(2+) complexes [L(1)CuCl(2)] (1), [L(2)CuCl(2)] (2) and [Me(2)L(3)CuCl]ClO(4) (3(Me,ClO4)) are monomeric in solution according to ESI mass spectrometry data, as well as in the solid state. Their Cu(+) analogues [L(1)Cu]ClO(4), [L(2)Cu]ClO(4), [L(3)Cu]ClO(4) (4-6), [BOC(2)L(1)Cu(NCCH(3))]ClO(4) (4(BOC)), [Me(2)L(2)Cu(NCCH(3))(2)]PF(6) (5(Me)) and [Me(2)L(3)Cu](2)(ClO(4))(2) (6(Me)) are also monomeric in acetonitrile solution, as confirmed crystallographically for 4(BOC) and 5(Me). In contrast, 6(Me) is dimeric in the solid state, with the thioether group of one of the ligands bound to a symmetry-related Cu(+) ion. Cyclic voltammetry studies revealed that the bis(2-methylbenzimidazolyl)amine-Cu(2+)/Cu(+) systems possess half-wave potentials in the range -0.16 to -0.08 V (referenced to the ferrocenium-ferrocene couple); these values are nearly 0.23 V less negative than those reported for related bis(picolyl)amine-derived ligands. Based on these observations, the N(3) or N(3)S donor set of the benzimidazole-derived ligands is analogous to previously reported chelating systems, but the electronic environment they provide is unique, and may have relevance to histidine and methionine-containing metalloenzymes. This is also reflected in the reactivity of [Me(2)L(2)Cu(NCCH(3))(2)](+) (5(Me)) and [Me(2)L(3)Cu](+) (6(Me)) towards dioxygen, which results in the production of the superoxide anion in both cases. The thioether-bound Cu(+) centre in 6(Me) appears to be more selective in the generation of O(2)˙(-) than 5(Me), lending evidence to the hypothesis of the modulating properties of thioether ligands in Cu-O(2) reactions.     

Anion binding by metallo-receptors of 5,5'-dicarbamate-2,2'-bipyridine ligands

Three 5,5'-dicarbamate-2,2'-bipyridine ligands (L = L(1)-L(3)) bearing ethyl, isopropyl or tert-butyl terminals, respectively, on the carbamate substituents were synthesized. Reaction of the ligands L with the transition metal ions M = Fe(2+), Cu(2+), Zn(2+) or Ru(2+) gave the complexes ML(n)X(2)·xG (1-12, n = 1-3; X = Cl, NO(3), ClO(4), BF(4), PF(6), ?SO(4); G = Et(2)O, DMSO, CH(3)OH, H(2)O), of which [Fe(L(2))(3)???SO(4)]·8.5H(2)O (2), [Fe(L(1))(3)???(BF(4))(2)]·2CH(3)OH (7), [Fe(L(2))(3)???(Et(2)O)(2)](BF(4))(2)·2CH(3)OH (8), [ZnCl(2)(L(1))][ZnCl(2)(L(1))(DMSO)]·2DMSO (9), [Zn(L(1))(3)???(NO(3))(2)]·2H(2)O (10), [Zn(L(2))(3)???(ClO(4))(Et(2)O)]ClO(4)·Et(2)O·2CH(3)OH·1.5H(2)O (11), and [Cu(L(1))(2)(DMSO)](ClO(4))(2)·2DMSO (12) were elucidated by single-crystal X-ray crystallography. In the complexes ML(n)X(2)·xG the metal ion is coordinated by n = 1, 2 or 3 chelating bipyridine moieties (with other anionic or solvent ligands for n = 1 and 2) depending on the transition metal and reaction conditions. Interestingly, the carbamate functionalities are involved in hydrogen bonding with various guests (anions or solvents), especially in the tris(chelate) complexes which feature the well-organized C(3)-clefts for effective guest inclusion. Moreover, the anion binding behavior of the pre-organized tris(chelate) complexes was investigated in solution by fluorescence titration using the emissive [RuL(3)](2+) moiety as a probe. The results show that fluorescent recognition of anion in solution can be achieved by the Ru(II) complexes which exhibit good selectivities for SO(4)(2-).     

Fluorous biphasic catalysis: synthesis and characterization of copper(I) and copper(II) fluoroponytailed 1,4,7-Rf-TACN and 2,2'-Rf-bipyridine complexes--their catalytic activity in the oxidation of hydrocarbons,olefins, and alcohols,including mechanistic implications

In this contribution on fluorous biphasic catalysis (FBC), we present the synthesis and characterization of new copper complexes, and define their role, as precatalysts, in the FBC oxidation of hydrocarbons, olefins, and alcohols. Thus the previously reported, but poorly characterized, fluoroponytailed ligand, 2,2'-R(f)-bipyridine (R(f)=-(CH(2))(3)C(8)F(17)) 2, as well as the new Cu(II) fluoroponytailed carboxylate synthon complex [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)] 3, will be addressed. Moreover, the reaction of previously described ligands, 1,4,7-R(f)-TACN 1, or 2,2'-R(f)-bipyridine 2 with 3 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-tacn)] 4 and [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-bpy)] 5, respectively. The reaction of 1 with [Cu(CH(3)CN)(4)]PF(6) or [CuCl] provided new Cu(I) complexes, which could be isolated and fully characterized as [Cu(R(f)-tacn)X']X, in which X=PF(6) (6) or X'=Cl (7) (soluble in perfluoroheptane). The Cu(II) and Cu(I) complexes, 4-7, were characterized by elemental analysis, mass spectrometry, and IR, diffuse reflectance UV/Vis, and EPR spectroscopies; complex 7 was also characterized by (1)H and (19)F[(1)H] NMR spectroscopy. Complexes 4 and 5, as well as 6 and 7 generated in situ, were evaluated as precatalysts for hydrocarbon and olefin functionalization. The oxidation reactions of these substrates in the presence of the necessary oxidants, tert-butyl hydroperoxide (TBHP) and oxygen gas, proceeded under FBC conditions for 5, 7, and Cu(I) salts with 2. However, the complexes with ligand 2 could not be recycled, owing to significant ligand dissociation. The Cu(II) complex 4, with the ligand 1, provide the oxidation of 4-nitrobenzyl alcohol to 4-nitrobenzaldehyde under single-phase FBC conditions at 90 degrees C with TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxy) and O(2); the precatalyst 4, can be utilized for an additional four catalytic cycles without loss of activity. Plausible mechanisms concerning these FBC oxidation reactions will be discussed.     

Bis(alpha-diimine)nickel complexes: molecular and electronic structure of three members of the electron-transfer series [Ni(L)(2)](z)() (z = 0, 1+, 2+) (L = 2-Phenyl-1,4-bis(isopropyl)-1,4-diazabutadiene). A combined experimental and theoretical study

From the reaction of Ni(COD)(2) (COD = cyclooctadiene) in dry diethylether with 2 equiv of 2-phenyl-1,4-bis(isopropyl)-1,4-diazabutadiene (L(Ox))(0) under an Ar atmosphere, dark red, diamagnetic microcrystals of [Ni(II)(L*)(2)] (1) were obtained where (L*)(1-) represents the pi radical anion of neutral (L(Ox))(0) and (L(Red))(2-) is the closed shell, doubly reduced form of (L(Ox))(0). Oxidation of 1 with 1 equiv of ferrocenium hexafluorophosphate in CH(2)Cl(2) yields a paramagnetic (S = 1/2), dark violet precipitate of [Ni(I)(L(Ox))(2)](PF(6)) (2) which represents an oxidatively induced reduction of the central nickel ion. From the same reaction but with 2 equiv of [Fc](PF(6)) in CH(2)Cl(2), light green crystals of [Ni(II)(L(Ox))(2)(FPF(5))](PF(6)) (3) (S = 1) were obtained. If the same reaction was carried out in tetrahydrofuran, crystals of [Ni(II)(L(Ox))(2)(THF)(FPF(5))](PF(6)) x THF (4) (S = 1) were obtained. Compounds 1, 2, 3, and 4 were structurally characterized by X-ray crystallography: 1 and 2 contain a tetrahedral neutral complex and a tetrahedral monocation, respectively, whereas 3 contains the five-coordinate cation [Ni(II)(L(Ox))(2)(FPF(5))](+) with a weakly coordinated PF(6)(-) anion and in 4 the six-coordinate monocation [Ni(II)(L(Ox))(2)(THF)(FPF(5))](+) is present. The electro- and magnetochemistry of 1-4 has been investigated by cyclic voltammetry and SQUID measurements. UV-vis and EPR spectroscopic data for all compounds are reported. The experimental results have been confirmed by broken symmetry DFT calculations of [Ni(II)(L*)(2)](0), [Ni(I)(L(Ox))(2)](+), and [Ni(II)(L(Ox))(2)](2+) in comparison with calculations of the corresponding Zn complexes: [Zn(II)((t)L(Ox))(2)](2+), [Zn(II)((t)L(Ox))((t)L*)](+), [Zn(II)((t)L*)(2)](0), and [Zn(II)((t)L*)((t)L(Red))](-) where ((t)L(Ox))(0) represents the neutral ligand 1,4-di-tert-butyl-1,4-diaza-1,3-butadiene and ((t)L*)(1-) and ((t)L(Red))(2-) are the corresponding one- and two-electron reduced forms. It is clearly established that the electronic structures of both paramagnetic monocations [Ni(I)(L(Ox))(2)](+) (S = 1/2) and [Zn(II)((t)L(Ox))((t)(L*)](+) (S = 1/2) are different.     

Octahedral Fe(II) and Ru(II) complexes based on a new bis 1,10-phenanthroline ligand that imposes a well defined axis.

A bis-chelating ligand (L1), made of two 7-(p-anisyl)-1,10-phenanthroline (phen) subunits connected with a p-(CH(2))(2)C(6)H(4)(CH(2))(2) spacer through their 4 positions, has been prepared, using Skraup syntheses and reaction of the anion of 4-methyl-7-anisyl-1,10-phenanthroline with alpha,alpha'-dibromo-p-xylene. Its Fe(II) complex, [FeL1(dmbp)](PF(6))(2), was prepared in one step by reaction of L1 with [Fe(dmbp)(3)](PF(6))(2) (dmbp = 4,4'-dimethyl-2,2'-bipyridine). On the other hand, its Ru(II) complex, [RuL1(dmbp)](PF(6))(2), was prepared in two steps from Ru(CH(3)CN)(4)Cl(2) and L1, followed by reaction with dmbp. X-ray crystal structure analyses show that in the two octahedral complexes, ligand L1 coils around the metal by coordination of the axial and two equatorial positions. It defines a 21 A long axis (O.O distance) running through the central metal and the terminal anisyl substituents. The complexes were also characterized by (1)H NMR, mass spectrometry, cyclic voltammetry, electronic absorption, and, in the case of Ru(II), fluorescence spectroscopy.     

Binding properties of solvatochromic indicators [Cu(X)(acac)(tmen)] (X = PF6- and BF4-, acac- = Acetylacetonate, tmen = N,N,N',N'-tetramethylethylenediamine) in solution and the solid state

The solvatochromic indicator [Cu(acac)(tmen)(H 2O)].PF 6 ( 1.H 2O) has been synthesized and crystallographically characterized. 1.H 2O binds an H 2O molecule at the Cu(II) axial site, while the PF 6 (-) anion is coordination free. The binding properties of [Cu(PF 6)(acac)(tmen)] ( 1) and [Cu(BF 4)(acac)(tmen)] ( 2) have been investigated in solution and the solid state. The donor number of the PF 6 (-) anion (DN PF6) was determined from the UV-vis spectra of 1 in 1,2-dichloroethane. The value of DN PF6 of the PF 6 (-) anion is slightly larger than that of the tetraphenylborate anion (BPh 4 (-)), which is known as a noncoordinating anion. In the solid state, 1 and 2 reversibly bind and release H 2O molecules at the Cu(II) axial sites. The coordinated H 2O molecules in 2 are more easily removed than those in 1 because of the strong Lewis basicity of the BF 4 (-) anion compared to the PF 6 (-) ion. The lower melting point of 1 versus 2 is attributed to the loose binding of the PF 6 (-) anions to the Cu(II) centers, which induces the dynamic nature of the crystal.     

Novel luminescent tetranuclear and pentanuclear copper(I)-dithiolates

Tetranuclear [Cu(4)mu(2)-dppm)(3)(mu(2)-mu(2)-NS(2))(mu(2)-mu(4)-NS(2))] (1) and pentanuclear [Cu(5)(mu(2)-dppm)(4)(mu(3)-mu-(3)-NS(2))(2)]PF(6) (2.PF(6)) (dppm = bis(diphenylphoshino)methane, NS(2)(2)(-) = 1,8-naphthalenedithiolate) were synthesized from the reactions between NS(2)(2)(-) and [Cu(2)(mu(2)-dppm)(2)(CH(3)CN)(2)](PF(6))(2). Compound 1 features a square Cu(4) core capped by a 5-coordinate S atom while 2.PF(6) exhibits an unprecedented square planar Cu(5) core. Both complexes display dual emissions at 480 and 620 nm which arise from ligand-centered npi and ligand-metal charge-transfer excited states, respectively.     

Metal Complexes of Mesitylphosphine: Synthesis, Structure, and Spectroscopy

A series of primary phosphine homoleptic complexes [ML(4)](n)()(+)X(n)() (1, M = Ni, n = 0; 2, M = Pd, n = 2, X = BF(4); 3, M = Cu, n = 1, X = PF(6); 4, M = Ag, n = 1, X = BF(4); L = PH(2)Mes, Mes = 2,4,6-Me(3)C(6)H(2)] was prepared from mesitylphosphine and Ni(COD)(2), [Pd(NCMe)(4)][BF(4)](2), [Cu(NCMe)(4)]PF(6), and AgBF(4), respectively. Reactions of 1-4 with MeC(CH(2)PPh(2))(3) (triphos) or [P(CH(2)CH(2)PPh(2))(3)] (tetraphos) afforded the derivatives [M(L')L](n)()(+)X(n)() (L' = triphos; 6, M = Ni, n = 0; 7, M = Cu, n = 1, X = PF(6); 8, M = Ag, n = 1, X = BF(4); L' = tetraphos; 9, M = Pd, n = 2, X = BF(4)). Addition of NOBF(4) to 1 yielded the nitrosyl compound [NiL(3)(NO)]BF(4), 5. The solution structure and dynamics of 1-9 were studied by (31)P NMR spectroscopy (including the first reported analyses of a 12-spin system for 1-2). Complexes 1, 3, 6, and 7.solvent were characterized crystallographically. The structural and spectroscopic studies suggest that the coordination properties of L are dominated by its relatively small cone angle and that the basicity of L is comparable to that of more commonly used tertiary phosphines.     

Structural variation in copper(I) complexes with pyridylmethylamide ligands: structural analysis with a new four-coordinate geometry index, tau4

Four Cu(I) complexes were synthesized with a family of pyridylmethylamide ligands, HL(R) [HL(R) = N-(2-pyridylmethyl)acetamide, R = null; 2,2-dimethyl-N-(2-pyridylmethyl)propionamide, R = Me(3); 2,2,2-triphenyl-N-(2-pyridylmethyl)acetamide, R = Ph(3))]. Complexes 1-3 were synthesized from the respective ligand and [Cu(CH(3)CN)(4)]PF(6) in a 2 : 1 molar ratio: [Cu(HL)(2)]PF(6) (1), [Cu(2)(HL(Me3))(4)](PF(6))(2) (2), [Cu(HL(Ph3))(2)]PF(6) (3). Complex 4, [Cu(HL)(CH(3)CN)(PPh(3))]PF(6), was synthesized from the reaction of HL with [Cu(CH(3)CN)(4)]PF(6) and PPh(3) in a 1 : 1 : 1 molar ratio. X-Ray crystal structures reveal that complexes 1, 3 and 4 are mononuclear Cu(I) species, while complex 2 is a Cu(I) dimer. The copper ions are four-coordinate with geometries ranging from distorted tetrahedral to seesaw in 1, 2, and 4. Complexes 1 and 2 are very air sensitive and they display similar electrochemical properties. The coordination geometry of complex 3 is nearly linear, two-coordinate. Complex 3 is exceptionally stable with respect to oxidation in the air, and its cyclic voltammetry shows no oxidation wave in the range of 0-1.5 V. The unusual inertness of complex 3 towards oxidation is attributed to the protection from bulky triphenyl substituent of the HL(Ph3) ligand. A new geometric parameter for four-coordinate compounds, tau(4), is proposed as an improved, simple metric for quantitatively evaluating the geometry of four-coordinate complexes and compounds.     

Mononuclear and binuclear copper(I) complexes ligated by bis(3,5-diisopropyl-1-pyrazolyl)methane: insight into the fundamental coordination chemistry of three-coordinate copper(I) complexes with a neutral coligand

By using the neutral bidentate nitrogen-containing ligand, bis(3,5-diisopropyl-1-pyrazolyl)methane (L1' '), the copper(I) complexes [Cu(L1' ')2](CuCl2) (1CuCl2), [Cu(L1' ')2](ClO4) (1ClO4), [Cu(L1' ')]2(ClO4)2 (2ClO4), [Cu(L1' ')]2(BF4)2 (2BF4), [Cu(L1' ')(NCMe)](PF6) (3PF6), [Cu(L1' ')(PPh3)](ClO4) (4ClO4), [Cu(L1' ')(PPh3)](PF6) (4PF6), [{Cu(L1' ')(CO)}2(mu-ClO4)](ClO4) (5ClO4), and the copper(II) complexes [{Cu(L1' ')}2(mu-OH)2(mu-ClO4)2] (6), and [Cu(L1' ')Cl2] (7) were systematically synthesized and fully characterized by X-ray crystallography and by IR and 1H NMR spectroscopy. In the case of copper(II), ESR spectroscopy was also applied. In comparison with the related neutral tridentate ligand L1', bis-chelated copper(I) complexes and binuclear linear-coordinated copper(I) complexes are easy to obtain with L1' ', like 1CuCl2, 1ClO4, 2ClO4, and 2BF4. Importantly, stronger and bulkier ligands such as acetonitrile (3PF6) and especially triphenylphosphine (4ClO4 and 4PF6) generate three-coordinate structures with a trigonal-planar geometry. Surprisingly, for the smaller ligand carbon monoxide, a mononuclear three-coordinate structure is very unstable, leading to the formation of a binuclear complex (5ClO4) with one bridging perchlorate anion, such that the copper(I) centers are four-coordinate. The same tendency is observed for the copper(II) bis(mu-hydroxo) compounds 6, which is additionally bridged by two perchlorate anions. Both copper(II) complexes 6 and 7 were obtained by molecular O2 oxidation of the corresponding copper(I) complexes. A comparison of the new copper(I) triphenylphosphine complexes 4ClO4 and 4PF6 with corresponding species obtained with the related tridentate ligands L1' and L1 (8ClO4 and 9, respectively) reveals surprisingly small differences in their spectroscopic properties. Density functional theory (DFT) calculations are used to shed light on the differences in bonding in these compounds and the spectral assignments. Finally, the reactivity of the different bis(pyrazolyl)methane complexes obtained here toward PPh3, CO, and O2 is discussed.     

Synthesis, characterization, crystal structure and preliminary reactivity behaviour of new heteropolytopic ligands based on the 1,3,5-triazine spacer and pyrazolyl, tris-pyrazolylmethyl and tris-pyrazolylethoxy bonding fragments

Four new potentially polytopic nitrogen donor ligands based on the 1,3,5-triazine fragment, L(1)-L(4) (L(1) = 2-chloro-4,6-di(1H-pyrazol-1-yl)-1,3,5-triazine, L(2) = N,N'-bis(4,6-di(1H-pyrazol-1-yl)-1,3,5-triazin-2-yl)ethane-1,2-diamine, L(3) = 2,4,6-tris(tri(1H-pyrazol-1-yl)methyl)-1,3,5-triazine, and L(4) = 2,4,6-tris(2,2,2-tri(1H-pyrazol-1-yl)ethoxy)-1,3,5-triazine) have been synthesized and characterized. The X-ray crystal structure of L(3) confirms that its molecular nature consists of a 1,3,5-triazine ring bearing three tripodal tris(pyrazolyl) arms. L(1), L(2), and L(4) react with Cu(I), Cu(II), Pd(II) and Ag(I) salts yielding mono-, di-, and oligonuclear derivatives: [Cu(L(1))(Cy(3)P)]ClO(4), [{Ag(2)(L(2))}(CF(3)SO(3))(2)]·H(2)O, [Cu(2)(L(2))(NO(3))(2)](NO(3))(2)·H(2)O, [Cu(2)(L(2))(CH(3)COO)(2)](CH(3)COO)(2)·3H(2)O, [Pd(2)(L(2))(Cl)(4)]·2H(2)O, [Ru(L(2))(Cl)(OH)]·CH(3)OH, [Ag(3)(L(4))(2)](CF(3)SO(3))(3) and [Ag(3)(L(4))(2)](BF(4))(3). The interaction of L(3) with Ag(I), Cu(II), Zn(II) and Ru(II) complexes unexpectedly produced the hydrolysis of the ligand with formation, in all cases, of tris(pyrazolyl)methane (TPM) derivatives. In detail, the already known [Ag(TPM)(2)](CF(3)SO(3)) and [Cu(TPM)(2)](NO(3))(2), as well as the new [Zn(TPM)(2)](CF(3)SO(3))(2) and [Ru(TMP)(p-cymene)]Cl(OH)·2H(2)O complexes have been isolated. Single-crystal XRD determinations on the latter derivatives confirm their formulation, evidencing, for the Ru(II) complex, an interesting supramolecular arrangement of the anions and crystallization water molecules.     

Synthesis, structures, and magnetic properties of the copper(II), cobalt(II), and manganese(II) complexes with 9-acridinecarboxylate and 4-quinolinecarboxylate ligands

To explore the relationships between the structures of ligands and their complexes, we have synthesized and characterized a series of metal complexes with two structurally related ligands, 9-acridinecarboxylic acid (HL(1)) and 4-quinolinecarboxylate acid (HL(2)), [Cu(2)(mu(2)-OMe)(2)(L(1))(2)(H(2)O)(0.69)](n) 1, [Cu(2)(L(1))(4)(CH(3)OH)(2)] 2, [Cu(3)(L(1))(6)(CH(3)OH)(6)].3H(2)O 3, [Mn(3)(L(1))(6)(CH(3)OH)(6)].3H(2)O 4, [Co(3)(L(1))(6)(CH(3)OH)(6)].3H(2)O 5, [Cu(L(2))(2)](n) 6, [Mn(L(2))(2)(H(2)O)](n) 7, and [Co(L(2))(2)(H(2)O)](n) 8. 1 is a three-dimensional (3D) polymer with an interpenetrating NbO type network showing one-dimensional (1D) channels, whereas 2 and 3 take bi- and trinuclear structures, respectively, because of the differences in basicity of the reaction systems in preparing the three complexes. 4 and 5 have trinuclear structures similar to that of 3. In 1-5, ligand L(1) performs different coordination modes with N,O-bridging in 1 and O,O'-bridging in 2-5, and the metal ions also show different coordination geometries: square planar in 1, square pyramidal in 2, and octahedral in 3-5. 6 has a two-dimensional structure containing (4,4) grids in which L(2) adopts the N,O-bridging mode and the Cu(II) center takes square planar geometry. 7 and 8 are isostructural complexes showing 1D chain structures, with L(2) adopting the O,O-bridging mode. In addition, the intermolecular O-H...N hydrogen bonds and pi-pi stacking interactions further extend the complexes (except 1 and 6), forming 3D structures. The magnetic properties of 2-7 have been investigated and discussed in detail.     

Coordination algorithms control molecular architecture: [CuI4(L2)4]4+ grid complex versus [MII2(L2)2X4]y+ side-by-side complexes (M=Mn,Co, Ni,Zn; X=solvent or anion) and [FeII(L2)3][Cl3FeIIIOFeIIICl3

The synthesis and characterisation of a pyridazine-containing two-armed grid ligand L2 (prepared from one equivalent of 3,6-diformylpyridazine and two equivalents of p-anisidine) and the resulting transition metal (Zn, Cu, Ni, Co, Fe, Mn) complexes (1-9) are reported. Single-crystal X-ray structure determinations revealed that the copper(I) complex had self-assembled as a [2 x 2] grid, [Cu(I) (4)(L2)(4)][PF(6)](4).(CH(3)CN)(H(2)O)(CH(3)CH(2)OCH(2)CH(3))(0.25) (2.(CH(3)CN)(H(2)O)(CH(3)CH(2)OCH(2)CH(3))(0.25)), whereas the [Zn(2)(L2)(2)(CH(3)CN)(2)(H(2)O)(2)][ClO(4)](4).CH(3)CN (1.CH(3)CN), [Ni(II) (2)(L2)(2)(CH(3)CN)(4)][BF(4)](4).(CH(3)CH(2)OCH(2)CH(3))(0.25) (5 a.(CH(3)CH(2)OCH(2)CH(3))(0.25)) and [Co(II) (2)(L2)(2)(H(2)O)(2)(CH(3)CN)(2)][ClO(4)](4).(H(2)O)(CH(3)CN)(0.5) (6 a.(H(2)O)(CH(3)CN)(0.5)) complexes adopt a side-by-side architecture; iron(II) forms a monometallic cation binding three L2 ligands, [Fe(II)(L2)(3)][Fe(III)Cl(3)OCl(3)Fe(III)].CH(3)CN (7.CH(3)CN). A more soluble salt of the cation of 7, the diamagnetic complex [Fe(II)(L2)(3)][BF(4)](2).2 H(2)O (8), was prepared, as well as two derivatives of 2, [Cu(I) (2)(L2)(2)(NCS)(2)].H(2)O (3) and [Cu(I) (2)(L2)(NCS)(2)] (4). The manganese complex, [Mn(II) (2)(L2)(2)Cl(4)].3 H(2)O (9), was not structurally characterised, but is proposed to adopt a side-by-side architecture. Variable temperature magnetic susceptibility studies yielded small negative J values for the side-by-side complexes: J=-21.6 cm(-1) and g=2.17 for S=1 dinickel(II) complex [Ni(II) (2)(L2)(2)(H(2)O)(4)][BF(4)](4) (5 b) (fraction monomer 0.02); J=-7.6 cm(-1) and g=2.44 for S= 3/2 dicobalt(II) complex [Co(II) (2)(L2)(2)(H(2)O)(4)][ClO(4)](4) (6 b) (fraction monomer 0.02); J=-3.2 cm(-1) and g=1.95 for S= 5/2 dimanganese(II) complex 9 (fraction monomer 0.02). The double salt, mixed valent iron complex 7.H(2)O gave J=-75 cm(-1) and g=1.81 for the S= 5/2 diiron(III) anion (fraction monomer=0.025). These parameters are lower than normal for Fe(III)OFe(III) species because of fitting of superimposed monomer and dimer susceptibilities arising from trace impurities. The iron(II) centre in 7.H(2)O is low spin and hence diamagnetic, a fact confirmed by the preparation and characterisation of the simple diamagnetic iron(II) complex 8. M?ssbauer measurements at 77 K confirmed that there are two iron sites in 7.H(2)O, a low-spin iron(II) site and a high-spin diiron(III) site. A full electrochemical investigation was undertaken for complexes 1, 2, 5 b, 6 b and 8 and this showed that multiple redox processes are a feature of all of them.