Synthesis and liquid crystal alignment properties of new cinnamate-based photocrosslinkable polymers

Because optical buffing can achieve aligning patterns with different azimuthal angles of the liquid crystal directors, photoalignment appears to be a very hopeful technique for designing complex LCD structures. Until recently, most photopolymers provided low anchoring and/or low tilt angles which are unsuitable for industrial applications. In this work, four new photocrosslinkable polymers based on biphenyl and naphthalene moieties have been prepared and characterized. These photopolymers have been irradiated with linearly polarized UV light, and liquid crystal cells have been made. The tilt angles generated by oblique irradiation have been measured as well as the anchoring energies. Finally, the stability of the liquid crystal alignment properties have been studied.     

Molecular orientation and liquid crystal alignment properties of new cinnamate-based photocrosslinkable polymers

Isotropic thin films of three original phenyl substituted cinnamate-based polymers, here-after referred to as 'Para', 'Meta' and 'Metamet' have been exposed to linearly polarized UV light and their photoinduced molecular orientations have been studied. The resulting photocrosslinked anisotropic polymer films were characterized using UV, conventional and polarization modulation (PM) FTIR spectroscopies. From UV and PM-IR linear dichroism measurements, at least two simultaneous orientation processes appear to play a key role in these phenyl substituted cinnamate-based systems. On the one hand, isomerization reactions deplete chromophores along the polarization direction (P) of the UV light and induce a preferential orientation of remaining 'trans'-isomers perpendicular to P; on the other hand, cycloaddition reactions lead to the formation of either head to head or head to tail photodimers aligned preferentially along P in the 'Para' and to a lesser extent in the 'Meta' and 'Metamet' systems. These last results are related to the different liquid crystal alignment properties of the films, and the influences of the chemical structure of the chromophores are discussed.     

Molecular orientation and liquid crystal alignment properties of new cinnamate-based photocrosslinkable polymers

Isotropic thin films of three original phenyl substituted cinnamate-based polymers, here-after referred to as 'Para', 'Meta' and 'Metamet' have been exposed to linearly polarized UV light and their photoinduced molecular orientations have been studied. The resulting photocrosslinked anisotropic polymer films were characterized using UV, conventional and polarization modulation (PM) FTIR spectroscopies. From UV and PM-IR linear dichroism measurements, at least two simultaneous orientation processes appear to play a key role in these phenyl substituted cinnamate-based systems. On the one hand, isomerization reactions deplete chromophores along the polarization direction (P) of the UV light and induce a preferential orientation of remaining 'trans'-isomers perpendicular to P; on the other hand, cycloaddition reactions lead to the formation of either head to head or head to tail photodimers aligned preferentially along P in the 'Para' and to a lesser extent in the 'Meta' and 'Metamet' systems. These last results are related to the different liquid crystal alignment properties of the films, and the influences of the chemical structure of the chromophores are discussed.     

Photoaddressable polymers for liquid crystal alignment

We demonstrate reversible photoinduced in situ reorientation of low molecular mass liquid crystals (LCs) by means of photoaddressable polymers (PAPs). These polymers contain mesogenic azobenzene side chains optimized to reorient cooperatively and effectively upon illumination with polarized light. Various low molecular mass LCs were introduced between two PAP layers and these sandwich devices were tested with respect to stability and reversibility of photoinduced orientation. Dissolution of the PAP layer by the low molecular mass LC was observed for several material combinations and systematically investigated. Different anisotropic dyes were added as fluorescence markers in order to monitor the photoinduced LC orientation. With an optimized material combination, more than 10 reversible reorientation processes could be realized with polarized light of either 514 or 405 nm wavelength, without any reduction in alignment quality. Further, microscopic polarized fluorescence patterns could be produced and erased within short exposure times.     

Photoaddressable polymers for liquid crystal alignment

We demonstrate reversible photoinduced in situ reorientation of low molecular mass liquid crystals (LCs) by means of photoaddressable polymers (PAPs). These polymers contain mesogenic azobenzene side chains optimized to reorient cooperatively and effectively upon illumination with polarized light. Various low molecular mass LCs were introduced between two PAP layers and these sandwich devices were tested with respect to stability and reversibility of photoinduced orientation. Dissolution of the PAP layer by the low molecular mass LC was observed for several material combinations and systematically investigated. Different anisotropic dyes were added as fluorescence markers in order to monitor the photoinduced LC orientation. With an optimized material combination, more than 10 reversible reorientation processes could be realized with polarized light of either 514 or 405 nm wavelength, without any reduction in alignment quality. Further, microscopic polarized fluorescence patterns could be produced and erased within short exposure times.     

Crosslinked liquid crystal polymers from liquid crystal monomers: Synthesis and mechanical properties

Difunctional acrylates and methacrylate monomers have been made which are high order smectic liquid crystal (or crystalline) at room temperature. This report discusses materials with the following structure: F–S–M–S–F, where F is a functional group, acrylate or methacrylate (A or M); S is a spacer (CH₂)_n(n), and M is a mesogen—in this case 4,4′-dioxybiphenyl (B). They are codified as BnA or BnM where n is the number of methylenes in the spacer. High conversion with high T_g can be obtained when polymerizing in the smectic state because the reactive end groups are concentrated in a small volume and can react well with little or no diffusion. B2A, B3A, B6A, B11A, and B3M were polymerized in the smectic state and compared to polymers made at temperatures where the monomers were isotropic. High conversion was obtained below final T_g—even then, probably because the polymers were ordered. All the polymers were studied by WAXD and dynamic mechanical spectroscopy. Solid-state NMR on B3A showed that there was very high conversion of the double bonds at all temperatures. B3A photopolymerized in the smectic state (60–76°C) produced a crystalline polymer with T_g = 185°C (1 Hz). When photopolymerized at 85°C, above the isotropization temperature (T_i), a poorly organized polymer was obtained with a T_g of 155°C (1 Hz). Monomers with an odd number of methylene groups as spacers were crystalline after polymerization. With an even number of methylene groups, they lost most of their crystallinity on polymerization below T_i, but retained a low order smectic structure. Similar structures were obtained with all the monomers when they were polymerized above T_i. There was little effect of polymerization temperature on T_g when the spacers had an even number of methylene groups. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of reactive liquid crystal monomers and side-chain liquid crystalline polymers

Two nematic liquid crystal (LC) monomers containing double bonds in the side chain were designed and synthesised. Length of the side groups varied from 1 to 2 methylene units. The side-chain polymers were synthesised by hydrosilylation reaction. The molecular structures of the intermediates and the LC monomers were characterised by Fourier transform infrared, elemental analysis and nuclear magnetic resonance spectroscopy. The thermal phase behaviour of the monomers and polymers were investigated by differential scanning calorimetry and polar optical microscopy coupled with hot stage. The LC monomers showed only one nematic mesophase in the cooling process. And, the two polymers exhibit an enantiotroppic nematic mesophase either in the heating or in the cooling process.     

Synthesis and liquid crystal properties of new banana-shaped cinnamoyl derivatives

Three new achiral five-ring banana-shaped homologous series have been synthesized and their liquid crystalline properties studied by polarizing microscopy, differential scanning calorimetry, and electro-otpical analysis. The compounds consist of two identical mesogenic structures of bis (alkoxycinnamoyloxybenzoates) linked on a different central ring (unsubstituted or methyl-substituted). The length of the terminal alkoxy groups was varied from heptyloxy to dodecyloxy; the hexadecyloxy group was also included in the study. It was found that the polymorphism of compounds can be strongly dependent upon molecular structure in this class of compound. In particular, substituents on the central ring may exert a significant effect on the type of mesophase observed.     

Synthesis and liquid crystal properties of new banana-shaped cinnamoyl derivatives

Three new achiral five-ring banana-shaped homologous series have been synthesized and their liquid crystalline properties studied by polarizing microscopy, differential scanning calorimetry, and electro-otpical analysis. The compounds consist of two identical mesogenic structures of bis (alkoxycinnamoyloxybenzoates) linked on a different central ring (unsubstituted or methyl-substituted). The length of the terminal alkoxy groups was varied from heptyloxy to dodecyloxy; the hexadecyloxy group was also included in the study. It was found that the polymorphism of compounds can be strongly dependent upon molecular structure in this class of compound. In particular, substituents on the central ring may exert a significant effect on the type of mesophase observed.     

Synthesis of novel hyperbranched polyimide for liquid crystal alignment

A novel hyperbranched polyimide (HPPI) was synthesized from a new four‐functional amine and 1,2,3,4‐cyclobutanetetracarboxylic dianhydride. The polyimide with hyperbranched structure exhibited excellent alignment for nematic liquid crystal (LC) compared with traditional linear polyimides. The solution viscosities of the poly(amic acids) (PAAs) and the surface morphology of PI films were investigated using an Ubbelhode‐type viscometer and atomic force microscopy, respectively. The viscosities of the hyperbranched PAAs were much lower than that of the linear PAA solution at any monomer ratio (amine:dianhydride). Pretilt angles of LCs above 2.8° were achieved with HPPI.     

Liquid crystal polymers. 15. Synthesis and liquid crystalline properties of alkyl-substituted polyesters

Alkyl substitution in a series of main chain, liquid crystal polyesters strongly depressed their glass temperatures, melting points, clearing points, and mesophase thermal stabilities. Polymers with pendant n-alkyl substituents eight carbon atoms or longer did not form a liquid crystal phase.     

Processing and properties of blends with liquid crystal polymers

Experimental data on the processing behavior and on the rheological and mechanical properties of blends with a liquid crystal polymer as one component are presented. The blends with low amounts of LCP show easier processability and lower viscosity than the thermoplastic matrix. The elastic modulus is also improved. The reduction of viscosity has been attributed to the lower pressure entry, due to the formation of fibrils and to the immiscibility of the two phases.     

Synthesis and properties of novel photocrosslinkable aromatic-aliphatic liquid crystal copolyesters based on poly(ethylene glycol) and cinnamic acid

Firstly, PEGn-TA monomers with carboxyl functional groups were synthesised by terephthalic acid (TA) and poly(ethylene glycol) (PEG) with molecular weight of 200, 400 and 600. Then, photocrosslinkable thermotropic liquid crystal copolyesters derived from PEGn-TA, 4,4?-biphenol, 4-hydroxy-cinnamic acid and 4-hydroxy-benzoic acid were successfully obtained by Vilsmeier adduct solution polymerisation method. Influence of PEG molecular weight on thermal behaviour, liquid crystal mesophase, hydrophilicity, structure and photoactivity were investigated by various measurements. Experimental results indicated that all copolyesters showed nematic mesophase textures, relative low melting temperatures, and two glass transitions as well as better hydrophilicity were observed for those contained higher PEG molecular weight. Photocrosslinking rate was increased first and then decreased due to effect of flexible PEG moieties. The resulted copolyesters with liquid crystal behaviour, excellent hydrophilicity and photoactivity could be potentially used as biomaterial.     

Passive broadband reflector using photocrosslinkable liquid crystal molecules

This work consists in creating passive optical filter reflecting light in a broadband wavelength with photo‐polymerizable mesogenic liquid crystal (LC) molecules from a reproducable method. The influence of several parameters was studied and it appears that reflective wavelength range can be modified by chiral agent concentration and/or temperature. Band broadening is influenced by several process parameters such as layer thickness, polymerization and dissolution times. A semi‐quantitative analysis allows the variation of conversion ratio as a function of polymerization and dissolution times to be determined. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis,structure, and properties of chiral liquid crystal monomers and polymers based on menthol

To study structure–mesomorphism relationships of the monomers and polymers based on menthol, four new chiral monomers ( M₁ – M₄ ) and the corresponding homopolymers ( P₁ – P₄ ) with menthyl group were synthesized. Their chemical structures, formula, phase behavior, and thermal stability were characterized by FTIR, ¹H NMR, ¹³C NMR, elemental analyses, differential scanning calorimetry, polarizing optical microscopy, X‐ray diffraction, and thermogravimetric analysis. The selective reflection of light was investigated with ultraviolet/visible spectrometer. The influence of the mesogenic core rigidity, spacer length, and menthyl steric effect on the mesomorphism of M₁ – M₄ and P₁ – P₄ was examined. By inserting a flexible spacer between the mesogenic core and the terminal menthyl groups, four target monomers and polymers could form the expected mesophase. Moreover, their melting temperature (T_m), glass transition temperature (T_g), clearing temperature (T_i), and mesophase range (ΔT) increased with increasing the mesogenic core rigidity; whereas the T_m and T_g decreased, T_i and ΔT increased with an increase of the spacer length. M₁ and M₂ showed monotropic and enantiotropic cholesteric phase, respectively, whereas M₃ and M₄ all revealed chiral smectic C (SmC*), cholesteric and cubic blue phases. In addition, with increasing temperature, the selective reflection of light shifted to the long wavelength region at the SmC* phase range and to the short wavelength region at the cholesteric range, respectively. P₁ and P₂ only showed a smectic A (SmA) phase, whereas P₃ and P₄ exhibited the SmC* and SmA phases. All the obtained polymers had very good thermal stability. © 2012 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym Chem, 2012     

Langmuir films of flexible polymers transferred to aqueous/liquid crystal interfaces induce uniform azimuthal alignment of the liquid crystal

We reported recently that amphiphilic polymers can be assembled at interfaces created between aqueous phases and thermotropic liquid crystals (LCs) in ways that: (i) couple the organization of the polymer to the order of the LC and (ii) respond to changes in the properties of aqueous phases that can be characterized as changes in the optical appearance of the LC. This investigation sought to characterize the behavior of aqueous–LC interfaces decorated with uniaxially compressed thin films of polymers transferred by Langmuir–Schaefer (LS) transfer. Here, we report physicochemical characterization of interfaces created between aqueous phases and the thermotropic LC 4-cyano-4′-pentylbiphenyl (5CB) decorated with Langmuir films of a novel amphiphilic polymer (polymer 1), synthesized by the addition of hydrophobic and hydrophilic side chains to poly(2-vinyl-4,4′-dimethylazlactone). Initial characterization of this system resulted in the unexpected observation of uniform azimuthal alignment of 5CB after LS transfer of the polymer films to aqueous–5CB interfaces. This paper describes characterization of Langmuir films of polymer 1 hosted at aqueous–5CB interfaces as well as the results of our investigations into the origins of the uniform ordering of the LC observed upon LS transfer. Our results, when combined, support the conclusion that uniform azimuthal alignment of 5CB is the result of long-range ordering of polymer chains in the Langmuir films (in a preferred direction orthogonal to the direction of compression) that is generated during uniaxial compression of the films prior to LS transfer. Although past studies of Langmuir films of polymers at aqueous–air interfaces have demonstrated that in-plane alignment of polymer backbones can be induced by uniaxial compression, these past reports have generally made use of polymers with rigid backbones. One important outcome of this current study is thus the observation of anisotropy and long-range order in Langmuir films of a novel flexible polymer. A second important outcome is the observation that the existence, extent, and dynamics of this order can be identified and characterized optically by transfer of the Langmuir film to a thin film of LC. Additional characterization of Langmuir films of two other flexible polymers [poly(methyl methacrylate) and poly(vinyl stearate)] using this method also resulted in uniform azimuthal alignment of 5CB, suggesting that the generation of long-range order in uniaxially compressed Langmuir films of polymers may also occur more generally over a broader range of polymers with flexible backbones.     

Synthesis and mesomorphic properties of trifluorobenzoate liquid crystal

Four series of trifluorobenzoate liquid crystals have been synthesized. Their phase transition temperatures have been also measured by texture observation in a polarizing microscope and confirmed by DSC. The influence of the lateral fluoro-substitution and triple bond has been also discussed.     

Synthesis and liquid crystal properties of mixed alkynyl-alkoxy-triphenylenes

The synthesis and liquid crystalline properties of some new multisubstituted triphenylenes are reported. The materials bear combinations of alkyne and alkoxy substituents and were designed to probe the structural factors controlling mesophase formation, type and stability in triphenylene discotics. A combination of factors contributes to mesophase stability in these systems. Compounds bearing two alkynes can support, and indeed enhance, columnar mesophase behaviour, but mesophase behaviour is completely suppressed when four or six alkynes are present. A twinned structure linked by a diacetylene bridge shows a stable nematic phase, but conversion to a saturated bridge destroys all mesophase behaviour.     

Synthesis of polymers having photocrosslinkable moieties for second-order nonlinear optics

Second-order non-linear optical polymers having photocrosslinkable moieties were synthesized by cationic polymerization of monomer (I) and monomer (II). The polymerization proceeded rapidly to give linear polymers in high yields. Monomer reactivity ratios were calculated to be r₁ = 0.90 and r₂ = 0.96 (r₁r₂ = 0.86), indicating that these monomers copolymerized through the almost ideal copolymerization mechanism. The photocrosslinking reaction of an equimolar copolymer film underwent the conversion of up to ca. 70% upon irradiation with a 500 W high-presure mercury lamp for 5 min. The electric field induced polar orientation of the chromophores (pendant 4-nitrophenyloxy groups) in a photocrosslinked polymer was stable for more than 10 days. This polymer exhibits a nonlinear coefficient d₃₃ of 5.6 × 10^-10 esu measured at a pumping wavelength of 1064 nm.     

Polyimides with main-chain photosensitive groups: Synthesis, characterization and their properties as liquid crystal alignment layers

In this work, a series of polyimides containing main-chain chalcone groups and side-chain cinnamate or acetate groups were synthesized. In the synthetic route, three dianhydride monomers were prepared by the reactions of 1,3-dihydro-1,3-dioxoisobenzofuran-5-carbonyl chloride with 1,3-bis(4-hydroxylphenyl)prop-2-en-1-one, 1,3-bis(4-(2-hydroxyethyl)phenyl)prop-2-en-1-one, and 1,3-bis(4-hydroxyphenyl)-pent-1-en-3-one-4-en, respectively. The precursor polyimides were obtained by the polycondensation of the dianhydride monomers with 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane and the in situ imidization. After the polymerization, the final products were obtained by introducing the side groups through the reactions of the polyimide precursors with cinnamoyl chloride or acetic anhydride. The chemical structures and properties of the polyimides were characterized by elemental analysis, ¹H NMR, ¹³C NMR, FTIR, GPC, and thermal analysis. The polyimides show high thermal stability and good solubility in aprotic polar organic solvents. The polyimides can undergo sensitive [2+2] photocycloaddition reaction upon the UV light irradiation. After irradiation with linearly polarized UV light, the polyimide thin films can induce 5CB liquid crystal molecules to homogeneously align in the liquid crystal cells. Both the alignment ability and pretilt angles of the molecular orientation depend on the chemical structures of the polyimides.