Highly efficient optically pumped cesium vapor laser

We have demonstrated an optically pumped continuous wave Cs vapor laser with an input power to output power slope efficiency of 81%. The laser power was 0.35 W for an input power of 0.57 W, yielding an overall optical efficiency of 63%.     

EAST NBI�ۺϲ���̨����Դ��Դϵͳ�IJ����о�

EAST NBI束线综合测试台已研制完成并具备一台兆瓦级离子源测试运行的全套电源设备,包括离子源灯丝电源、弧电源、加速器电源、抑制极电源、偏转磁体电源及缓冲器电源等。介绍了EAST兆瓦级离子源进行起弧放电调试运行的方式,叙述了各套离子源电源系统的设计结构、技术特点及运行控制方式,分析了离子源电源系统稳定可靠运行需要解决的各个难点,给出了EAST束线样机进行高功率及长脉冲束引出测试运行的实验结果。     

用于Rb原子冷却系统的半导体激光放大(TPA)装置

报道了我们最近研制的780 13m半导体激光放大装置.激光放大管采用Eagleyard公司生产的(EYP-TPA-0780-01000)半导体锥形放大器,当输入的种子源激光功率为25 mW时,放大器输出的激光功率达600mW左右,该光束经过透镜整形,声光调制器频移,然后耦合到单模保偏光纤后,输出功率达110 mW.该激光放大装置可很好的用于高密度冷原子的俘获.     

高功率2 μm波长可调谐超短脉冲光纤激光器

高功率2 μm波长可调谐的超短脉冲激光具有峰值功率高、脉冲宽度窄、波长可调谐等优势,在医疗手术、大气通信、光电对抗等领域具有广泛的应用。利用高峰值功率的掺铒光纤放大器泵浦高非线性光纤,在全光纤化结构中获得了1895～2165 nm可调谐的拉曼孤子输出。采用啁啾脉冲放大技术对拉曼孤子的脉冲能量进行提升,放大后拉曼孤子的单脉冲能量为1.56 μJ,平均功率达到50.6 W,脉冲宽度为83 ps。经过光栅对压缩后,脉冲宽度降低至1.23 ps,平均功率为22 W,峰值功率达到0.55 MW。放大后的脉冲仍具有波长调谐的能力,当输出功率为5 W和50.6 W时,脉冲的波长调谐范围分别为38 nm和8 nm。     

Power Absorption in High Power Microwave Discharges

Measurements on RF power absorption in microwave discharges at 2.45 GHz, at pressures from 1 to 30 Torr in N2 and from 1 to 500 Torr in Ar, are described. A linear slow-wave structure of the strapped-bar type was employed for coupling RF energy to the plasma. From measurements on the plasma volume and on the total power absorbed, the variation with gas pressure of the RF power density in the plasma was obtained. For an incident power of 1 kW, power densities as high as 2-3 W/cm3 over relatively large plasma volumes could be achieved. The experimental data were used to calculate the pressure dependence of the electron density in an argon plasma, for an incident power of 1 kW.     

Emission Dependence on Length in a 1.48-mum Pumped Erbium-Doped Laser with an All-Fiber Configuration

We report a study on the main features of a 1.48-mum pumped erbium-doped fiber laser, such as threshold pump power, output power, and slope efficiency. In particular we have focused on its dependence on active fiber length. We employed an all-fiber laser configuration, which included mirrors directly coated onto the polished fiber endfaces. Launched pump power and laser output power were introduced and extracted, respectively, from the laser cavity by means of couplers. Our measure ments show the existence of an optimum erbium-doped fiber length, where threshold power reaches minimum and output power maximum.     

Output power improvement in an Yb-doped fiber laser with an additional unpumped Yb-doped fiber

Master oscillator power amplifier (MOPA) technology has been widely used in high-power or ultrashort-pulse fiber laser systems because the shape of the laser pulse can be easily adjusted. Usually, the first amplification stage of a 1064 nm fiber laser uses the core-pumped Yb-doped fiber amplifier (YDFA); however, the gain or output power is limited owing to the strong amplifier spontaneous emission (ASE) in the 1030 nm band. This paper presents the improved output power in an YDFA by inserting an additional unpumped Yb-doped fiber, which absorbs the lost backward ASE emitted from the pump end. We achieved an output power increase of more than 10% in a low-power signal, and the increase in output power decreased as the signal power increased. Moreover, the insertion of an additional unpumped Yb-doped fiber restricted the unwanted 1030 nm lasing in a low-power signal.     

Diode-laser pumped high-power and actively mode-locked Nd:YLF laser with fast switching

In an actively mode-locked laser, self-phase modulation can make pulse shorter at the expanse of causing instability at high pumping power. Using fast switching on the acousto-optic modulator, we can generate an actively mode-locked pulse train with shorter pulse width and higher average power than that driven by a sinusoidal signal. A 9-ps pulse train was generated in a mode-locked laser with an average power of 600 mW whose power level, to our knowledge, is the highest for diode-pumped and mode-locked Nd:YLF lasers.     

基于复杂网络理论的互联电网Braess悖论现象分析

为了探究互联电力网络中的Braess悖论现象, 采用二阶类Kuramoto相振子模型对电网进行动力学建模, 将两个子网通过大度节点相连构建互联电网。当两个子网间有功率传输时, 分别在两个子网内部新增传输线路探究互联电网发生Braess悖论现象的概率并分析其原因。研究发现: 当互联电网中两个子网间的功率传输达到某一临界值时, 受电子网的同步能力远优于供电子网的同步能力, 供电子网新增传输线路引起互联电网发生Braess悖论的概率远高于受电子网新增传输线路引发的Braess悖论概率。通过定义子网序参数对上述现象的产生进行深入分析。本研究对互联电网的拓扑优化具有重要意义。     

Kolmogorov spectrum of renewable wind and solar power fluctuations

With increasing the contribution of renewable energies in power production, the task of reducing dynamic instability in power grids must also be addressed from the generation side, because the power delivered from such sources is spatiotemporally stochastic in nature. Here we characterize the stochastic properties of the wind and solar energy sources by studying their spectrum and multifractal exponents. The computed power spectrum from high frequency time series of solar irradiance and wind power reveals a power-law behaviour with an exponent ～ 5/3 (Kolmogorov exponent) for the frequency domain 0.001?Hz < f < 0.05?Hz, which means that the power grid is being fed by turbulent-like sources. Our results bring important evidence on the stochastic and turbulent-like behaviour of renewable power production from wind and solar energies, which can cause instability in power grids. Our statistical analysis also provides important information that must be used as a guideline for an optimal design of power grids that operate under intermittent renewable sources of power.     

High-peak-power AlGaInAs quantum-well 1.3-mum laser pumped by a diode-pumped actively Q-switched solid-state laser

We report a room-temperature high-peak-power AlGaInAs 1.36 microm TEM00 laser pumped by a diode-pumped actively Q-switched Nd:YAG 1.06 microm laser. With an average pump power of 1.0 W, an average output power of 140 mW was obtained at a pulse repetition rate of 10 kHz. With a peak pump power of 8.3 kW, the highest peak output power was 1.5 kW at a pulse repetition rate of 5 kHz.     

Increasing the RF energy per pulse of an RKO

The Air Force Research Laboratory RKO source has recently demonstrated the ability to convert electron beam power to RF power until the termination of the electron beam pulse, achieving a power of 1.5 GW at an energy of 170 J. These results represent an increase in power of 25-30% in power and energy extracted from this source. This paper discusses the principal research areas encountered in lengthening the RF pulse (FWHM) from 50 ns to the present 120 ns and the associated increase in the RF energy     

Diode-pumped passively Q-switched YAG/Yb:YAG laser with Cr4+:YAG as a saturable absorber

We design an efficient passively Q-switched laser using a composite YAG/Yb:YAG crystal as the laser gain medium and a Cr⁴⁺:YAG crystal as a saturable absorber. We obtain an average output power of 1.81 W in 1030 nm laser at an absorbed pump power of 4.8 W, corresponding to an optical-to-optical efficiency of 37.7% and a slope efficiency of 47.3%. The pulsed laser has a repetition rate of about 28.6 kHz and a pulse width of 15.8 ns, with the highest peak power of 4 kW. In addition, using a LBO as the intracavity frequency doubler, we obtain a maximum power of 246 mW in 515 nm pulsed laser at an absorbed pump power of 3.8 W.     

Spectrum efficient power allocation schemes for OFDM cognitive radio with statistical interference constraints

In this paper, we study the power allocation problem for an orthogonal frequency division multiplexing (OFDM)-based cognitive radio (CR) system. In a departure from the conventional power allocation schemes available in the literature for OFDM-based CR, we propose power allocation schemes that are augmented with spectral shaping. Active interference cancellation (AIC) is an effective spectral shaping technique for OFDM-based systems. Therefore, in particular, we propose AIC-based optimal and suboptimal power allocation schemes that aim to maximize the downlink transmission capacity of an OFDM-based CR system operating opportunistically within the licensed primary users (PUs) radio spectrum in an overlay approach. Since the CR transmitter may not have the perfect knowledge about the instantaneous channel quality between itself and the active PUs, the interference constraints imposed by each of the PUs are met in a statistical sense. We also study an optimal power allocation scheme that is augmented with raised cosine (RC) windowing-based spectral shaping. For a given power budget at the CR transmitter and the prescribed statistical interference constraints by the PUs, we demonstrate that although the on-the-run computational complexity of the proposed AIC-based optimal power allocation scheme is relatively higher, it may yield better transmission rate for the CR user compared to the RC windowing-based power allocation scheme. Further, the AIC-based suboptimal scheme has the least on-the-run computational complexity, and still may deliver performance that is comparable to that of the RC windowing-based power allocation scheme. The presented simulation results also show that both the AIC-based as well as the RC windowing-based power allocation schemes lead to significantly higher transmission rates for the CR user compared to the conventional (without any spectral shaping) optimal power allocation scheme.     

66 W average power from a microjoule-class sub-100 fs fiber oscillator

Performance scaling of passively mode-locked ultrashort-pulse fiber oscillators in terms of average power, peak power, and pulse energy is demonstrated. A very-large-mode-area fiber laser in an all-positive group-velocity-dispersion ring cavity configuration with intracavity spectral filter, mode-locked by nonlinear polarization evolution, emits 66 W of average power at 76 MHz repetition rate, corresponding to 0.9 μJ pulse energy. The pulses are dechirped to 91 fs outside the cavity with an average power of 60 W remaining after the compressor. The generated pulse peak power is as high as 7 MW.     

Performance Analysis and Four-Objective Optimization of an Irreversible Rectangular Cycle

Based on the established model of the irreversible rectangular cycle in the previous literature, in this paper, finite time thermodynamics theory is applied to analyze the performance characteristics of an irreversible rectangular cycle by firstly taking power density and effective power as the objective functions. Then, four performance indicators of the cycle, that is, the thermal efficiency, dimensionless power output, dimensionless effective power, and dimensionless power density, are optimized with the cycle expansion ratio as the optimization variable by applying the nondominated sorting genetic algorithm II (NSGA-II) and considering four-objective, three-objective, and two-objective optimization combinations. Finally, optimal results are selected through three decision-making methods. The results show that although the efficiency of the irreversible rectangular cycle under the maximum power density point is less than that at the maximum power output point, the cycle under the maximum power density point can acquire a smaller size parameter. The efficiency at the maximum effective power point is always larger than that at the maximum power output point. When multi-objective optimization is performed on dimensionless power output, dimensionless effective power, and dimensionless power density, the deviation index obtained from the technique for order preference by similarity to an ideal solution (TOPSIS) decision-making method is the smallest value, which means the result is the best.     

HL-2M 装置供电系统研制

为满足 HL-2M 装置的供电需求,须配套建设相应的供电系统。通过仿真计算 HL-2M 装置的总体供 电需求,考虑到 HL-2A 装置现有的供电系统设备,提出了兼顾 HL-2A 和 HL-2M 装置供电需求的总体配置方案。介绍了国内首台 300MVA 立式交流脉冲发电机组、磁体电源、高压电源和电源控制系统的研制情况。     

Optimal Heat Exchanger Area Distribution and Low-Temperature Heat Sink Temperature for Power Optimization of an Endoreversible Space Carnot Cycle

Using finite-time thermodynamics, a model of an endoreversible Carnot cycle for a space power plant is established in this paper. The expressions of the cycle power output and thermal efficiency are derived. Using numerical calculations and taking the cycle power output as the optimization objective, the surface area distributions of three heat exchangers are optimized, and the maximum power output is obtained when the total heat transfer area of the three heat exchangers of the whole plant is fixed. Furthermore, the double-maximum power output is obtained by optimizing the temperature of a low-temperature heat sink. Finally, the influences of fixed plant parameters on the maximum power output performance are analyzed. The results show that there is an optimal temperature of the low-temperature heat sink and a couple of optimal area distributions that allow one to obtain the double-maximum power output. The results obtained have some guidelines for the design and optimization of actual space power plants.     

A kilowatt level diode-side-pumped QCW Nd:YAG ceramic laser

We demonstrate a kilowatt level Quasi-continuous-wave (QCW) diode-side-pumped Nd:YAG ceramic laser at 1064 nm. The laser system adopts a master oscillator power amplifier scheme (MOPA). The master oscillator contains two diode-pumped laser modules. Under the pump power of 2000 W, an output power of 686 W was obtained. After amplified by an identical ceramic laser module, a maximum output power of 1020 W was obtained under a total incident pump power of 3433 W, corresponding to an optical-optical conversion efficiency of 29.7%. At the maximal output power, the repetition frequency was measured to be 1 kHz and the pulse width was 114 μs. To the best of our knowledge, this is the first time to realize QCW side-pumped Nd:YAG ceramic laser system with output power above 1 kW.     

Mechanisms of anode power deposition in a low pressure free burningarc

Anode power deposition is a dominant power loss mechanism for arcjets and magnetoplasmadynamic (MPD) thrusters. In this study, a free burning arc experiment was operated at pressures and current densities similar to those in arcjets and MPD thrusters in an attempt to identify the physics controlling this loss mechanism. Use of a free burning arc allowed for the isolation of independent variables controlling anode power deposition and provided a convenient and flexible way to cover a broad range of currents, anode surface pressures, and applied magnetic field strengths and orientations using an argon gas. Test results showed that anode power deposition decreased with increasing anode surface pressure up to 6.7 Pa and then became insensitive to pressure. Anode power increased with increasing arc current, while the electron number density near the anode surface increased linearly. Anode power also increased with increasing applied magnetic field strength due to an increasing anode fall voltage. Applied magnetic field orientation had an effect only at high currents and low anode surface pressures, where anode power decreased when applied-field lines intercepted the anode surface. The results demonstrated that anode power deposition was dominated by the kinetic energy of the current-carrying electrons acquired over the anode fall region. Furthermore, the results showed that anode power deposition can be reduced by operating at increased anode pressures, reduced arc currents, anode current densities, and applied magnetic field strengths, and with magnetic field lines intercepting the anode