金纳米粒子组装体系粒子密度与SERS强度的关系

利用纳米粒子组装技术制备出金基底／巯基苯胺自组装膜偶联层／金纳米粒子的“三明治”结构。实验结果显示,该结构对偶联层分子的喇曼光谱显示出很好的增强效应,增强因子可达１０＾５;在表面粒子密度（粒子覆盖度）较低时,表面增强喇曼散射（ＳＥＲＳ）强度与表面粒子密度近似呈线性关系;随着表面粒子密度的增加,这种线性关系出现负偏差并在表面粒子密度较高区域出现一个平台;在６０￣１１０ｎｍ范围内大粒径金粒子对喇曼光谱     

Raman-based detection of bacteria using silver nanoparticles conjugated with antibodies

Surface enhanced Raman scattering (SERS) has been used to detect bacteria captured by polyclonal antibodies sorbed onto protein-A-modified silver nanoparticles. The selectivity and discrimination of the technique were assured by using a specific antibody to the model bacterium, Escherichia coli. As the SERS enhancement mechanism depends upon the metal surface proximity, 8 nm was considered as the optimum distance between the bacterium and the nanoparticle surface. Spectral reproducibility was verified using Principal Components Analysis to differentiate the clusters corresponding to the biomolecules and/or bacteria sorbed onto nanoparticles. Compared to the normal Raman spectrum, the SERS technique resulted in an intensity enhancement of over 20-fold.     

Single-molecule and single-nanoparticle SERS: from fundamental mechanisms to biomedical applications

This tutorial review discusses a new class of colloidal metal nanoparticles that is able to enhance the efficiencies of surface-enhanced Raman scattering (SERS) by as much as 10(14)-10(15) fold. This enormous enhancement allows spectroscopic detection and identification of single molecules located on the nanoparticle surface or at the junction of two particles under ambient conditions. Considerable progress has been made in understanding the enhancement mechanisms, including definitive evidence for the single-molecule origin of fluctuating SERS signals. For applications, SERS nanoparticle tags have been developed based on the use of embedded reporter molecules and a silica or polymer encapsulation layer. The SERS nanoparticle tags are capable of providing detailed spectroscopic information and are much brighter than semiconductor quantum dots in the near-infrared spectral window. These properties have raised new opportunities for multiplexed molecular diagnosis and in vivo Raman spectroscopy and imaging.     

Raman scattering of 4-aminobenzenethiol sandwiched between Ag nanoparticle and macroscopically smooth Au substrate: effects of size of Ag nanoparticles and the excitation wavelength

A nanogap formed by a metal nanoparticle and a flat metal substrate is one kind of "hot site" for surface-enhanced Raman scattering (SERS). Accordingly, although no Raman signal is observable when 4-aminobenzenethiol (4-ABT), for instance, is self-assembled on a flat Au substrate, a distinct spectrum is obtained when Ag or Au nanoparticles are adsorbed on the pendent amine groups of 4-ABT. This is definitely due to the electromagnetic coupling between the localized surface plasmon of Ag or Au nanoparticle with the surface plasmon polariton of the planar Au substrate, allowing an intense electric field to be induced in the gap even by visible light. To appreciate the Raman scattering enhancement and also to seek the optimal condition for SERS at the nanogap, we have thoroughly examined the size effect of Ag nanoparticles, along with the excitation wavelength dependence, by assembling 4-ABT between planar Au and a variable-size Ag nanoparticle (from 20- to 80-nm in diameter). Regarding the size dependence, a higher Raman signal was observed when larger Ag nanoparticles were attached onto 4-ABT, irrespective of the excitation wavelength. Regarding the excitation wavelength, the highest Raman signal was measured at 568 nm excitation, slightly larger than that at 632.8 nm excitation. The Raman signal measured at 514.5 and 488 nm excitation was an order of magnitude weaker than that at 568 nm excitation, in agreement with the finite-difference time domain simulation. It is noteworthy that placing an Au nanoparticle on 4-ABT, instead of an Ag nanoparticle, the enhancement at the 568 nm excitation was several tens of times weaker than that at the 632.8 nm excitation, suggesting the importance of the localized surface plasmon resonance of the Ag nanoparticles for an effective coupling with the surface plasmon polariton of the planar Au substrate to induce a very intense electric field at the nanogap.     

Synthesis and Characterization of Silver Nanoparticle Modified 3-Aminophenol Resin Microspheres with Application for Determination of Carcinoembryonic Antigens by Surface-Enhanced Raman Scattering

Uniform phenolic resin microspheres were prepared by the polycondensation of 3-aminophenol and formaldehyde. On the surface of the 3-aminophenol resin microspheres, silver nanoparticles were synthesized in situ and immobilized by simple heating. The composite was employed as a substrate for surface-enhanced Raman scattering (SERS). The SERS enhancement factor was evaluated using 4-mercaptobenzoic acid and Nile blue A as signal molecules. A highly sensitive SERS immunoassay that combined labeled antibody conjugated silver nanoparticle modified 3-aminophenol resin microspheres and coating antibody conjugated magnetic nanoparticles was fabricated to determine carcinoembryonic antigen. A linear relationship was obtained between the Raman intensity and the concentration of carcinoembryonic antigen. The limit of detection was 1.2 picograms per milliliter at a signal-to-noise ratio of three. This is believed to be the first report of a SERS immunoassay using silver nanoparticle modified 3-aminophenol resin microspheres as substrates.     

SE(R)RS devices fabricated by a laser electrodispersion method

A novel laser electrodispersion (LE) technique was employed to deposit gold nanoparticles onto Si and SiO(x) surfaces. The LE technique combines laser ablation with cascade fission of liquid metal micro-drops, which results in the formation of nanoparticles upon rapid cooling. The shape and the size distribution of the Au nanoparticles prepared by LE depend on the nature of the support. Gold nanoparticles were also deposited in the channels of microreactors fabricated by wet etching of Si and used as SE(R)RS sensors. The influence of the nanoparticle surface density as well as of the nature of the substrate on the Raman response was studied. At an appropriate surface density of the deposited nanoparticles a significant enhancement of Raman signal was observed showing the possibility to create efficient SERS substrates. Application of microfluidic devices in surface enhanced Raman spectroscopy (SERS) in continuous-flow mode with sensor regeneration is described.     

An ionic surfactant-mediated Langmuir-Blodgett method to construct gold nanoparticle films for surface-enhanced Raman scattering

A gold nanoparticle film for surface-enhanced Raman scattering (SERS) was successfully constructed by an ionic surfactant-mediated Langmuir-Blodgett (LB) method. The gold film was formed by adding ethanol to a gold colloid/hexane mixture in the presence of dodecyltrimethylammonium bromide (DTAB). Consequently, gold nanoparticles (AuNPs) assembled at the water/hexane interface due to the decrease in surface charge density of AuNPs. Since DTAB binds the gold surface by a coulombic force, rather than a chemical bonding, it is easily replaced by target molecules for SERS purposes. The SERS enhancement factor of the 80 nm gold nanoparticle film was approximately 1.2 × 10(6) using crystal violet (CV) as a Raman dye. The SERS signal from the proposed DTAB-mediated film was approximately 10 times higher than that from the octanethiol-modified gold film, while the reproducibility and stability of this film compared to an octanethiol-modified film were similar. This method can also be applied to other metal nanostructures to fabricate metal films for use as a sensitive SERS substrate with a higher enhancement factor.     

Block Copolymer Supported Gold Nanoparticles Assemblies with Exposed Gold Surface

Polymer-involved nanoparticles or nanoparticle assemblies are now facing a crossroad, where the exposure of nanoparticle and multiple nanoparticles cannot be obtained at the same time. Therefore, a new series of nanoparticle clusters is synthesized, where multiple gold nanoparticles assemble with amphiphilic block copolymers supporting inside. The exposure of gold nanoparticles of the structure is confirmed and increases the reduction rate of 4-nitrophenol by 60%. The assemblies can also be used as surface enhanced Raman scattering(SERS) probes with an enhancement factor(EF) as high as 3×10³.     

The effects of Au aggregate morphology on surface-enhanced Raman scattering enhancement

We have identified empirically a relationship between the surface morphology of small individual aggregates (<100 Au nanoparticles) and surface-enhanced Raman scattering (SERS) enhancement. We have found that multilayer aggregates generated greater SERS enhancement than aggregates limited to two-dimensional (2D) or one-dimensional structures, independent of the number of particles. SERS intensity was measured using the 730 cm(-1) vibrational mode of the adsorbed adenine molecule on 75 nm Au particles, at an excitation wavelength of 632.8 nm. To gain insight into these relationships and its mechanism, we developed a qualitative model that considers the collections of interacting Au nanoparticles of an individual aggregate as a continuous single entity that retains its salient features. We found the dimensions of the modeled surface features to be comparable with those found in rough metal surfaces, known to sustain surface plasmon resonance and generate strong SERS enhancement. Among the aggregates that we have characterized, a three 75 nm nanoparticle system was the smallest to generate strong SERS enhancement. However, we also identified single individual Au nanoparticles as SERS active at the same wavelength, but with a diameter twice in size. For example, we observed a symmetric SERS-active particle of 180 nm in diameter. Such individual nanoparticles generated SERS enhancement on the same order of magnitude as the small monolayer Au aggregates, an intensity value significantly stronger than predicted in recent theoretical studies. We also found that an aspect of our model that relates the dimensions of its features to SERS enhancement is also applicable to single individual Au particles. We conclude that the size of the nanoparticle itself, or the size of a protrusion of an irregularly shaped single Au particle, will contribute to SERS enhancement provided that its dimensions satisfy the conditions for plasmon resonance. In addition, by considering the ratio of the generated intensities of typical 2D Au aggregates to the enhancement of individual SERS-active particles, a value of approximately 2 is determined. Its moderate value suggests that it is not the aggregation effect that is responsible for much of the observed SERS enhancement but the surface region associated with the SERS-active site.     

半导体纳米材料作为表面增强拉曼散射基底的研究进展

在总结半导体纳米材料作为表面增强拉曼散射(SERS)基底的一些相关研究工作的基础上, 讨论了半导体纳米粒子SERS基底的增强效应与纳米材料的种类、尺寸的相关性; 对半峰宽、激发波长进行了分析, 并对半导体纳米材料作为SERS基底时, 化学增强、电磁增强、纳米半导体缺陷和激子波尔半径的影响等进行了阐述.     

Effect of Ag and Au nanoparticles on the SERS of 4-aminobenzenethiol assembled on powdered copper

Raman scattering measurements were conducted for 4-aminobenzenethiol (4-ABT) assembled on powdered copper substrates. Initially, very weak Raman peaks were detected, but upon attaching Ag nanoparticles probably via NH2 groups onto 4-ABT/Cu, distinct Raman spectra were observed. Considering the fact that no Raman peak was identified when Ag nanoparticles were adsorbed on 4-aminophenyl-derivatized silane monolayers assembled on silica powders, the Raman spectra observed for Ag@4-ABT/Cu should be surface-enhanced Raman scattering (SERS) spectra, occurring by an electromagnetic coupling of the localized surface plasmon of Ag nanoparticles with the surface plasmon polariton of Cu powders. The extra enhancement factor attainable by the attachment of a single Ag nanoparticle is estimated to be as large as 1.4 x 10(5) in the case when 632.8-nm radiation is used as the excitation source. When Au nanoparticles were attached onto 4-ABT/Cu, at least an order of magnitude weaker Raman spectra were obtained at all excitation wavelengths, however, indicating that the Au-to-Cu coupling should be far less effective than the Ag-to-Cu coupling for the induction of SERS.     

Silver Nanoparticle Thin Films with Nanocavities for Surface‐Enhanced Raman Scattering

The formation of nanometer‐sized gaps between silver nanoparticles is critically important for optimal enhancement in surface‐enhanced Raman scattering (SERS). A simple approach is developed to generate nanometer‐sized cavities in a silver nanoparticle thin film for use as a SERS substrate with extremely high enhancement. In this method, a submicroliter volume of concentrated silver colloidal suspension stabilized with cetyltrimethylammonium bromide (CTAB) is spotted on hydrophobic glass surfaces prepared by the exposure of the glass to dichloromethysilane vapors. The use of a hydrophobic surface helps the formation of a more uniform silver nanoparticle thin film, and CTAB acts as a molecular spacer to keep the silver nanoparticles at a distance. A series of CTAB concentrations is investigated to optimize the interparticle distance and aggregation status. The silver nanoparticle thin films prepared on regular and hydrophobic surfaces are compared. Rhodamine 6G is used as a probe to characterize the thin films as SERS substrates. SERS enhancement without the contribution of the resonance of the thin film prepared on the hydrophobic surface is calculated as 2×10⁷ for rhodamine 6G, which is about one order of magnitude greater than that of the silver nanoparticle aggregates prepared with CTAB on regular glass surfaces and two orders of magnitude greater than that of the silver nanoparticle aggregates prepared without CTAB on regular glass surfaces. A hydrophobic surface and the presence of CTAB have an increased effect on the charge‐transfer component of the SERS enhancement mechanism. The limit of detection for rhodamine 6G is estimated as 1.0×10^?8 M . Scanning electron microscopy and atomic force microscopy are used for the characterization of the prepared substrate.     

Raman enhancement factor of a single tunable nanoplasmonic resonator

We have developed a novel technique to precisely determine the Raman enhancement factor in single nanoplasmonic resonators (TNPRs). TNPRs are lithographically defined metallodielectric nanoparticles composed of two silver disks stacked vertically, separated by a silica layer. At resonance, the local electromagnetic fields are enhanced at the TNPR surface, making it an ideal surface-enhanced Raman scattering (SERS) active substrate. The ability to control the dimensions of the metallic and dielectric layers offers the unique advantage of fine-tuning the plasmon resonance frequency to maximize the enhancement of the Raman signal. Furthermore, by selective shielding of the outer surface of the metallic structure, the efficiency can be further enhanced by guiding the molecular assembly to the locations that exhibit strong electromagnetic fields. We experimentally demonstrate SERS enhancement factors of (6.1+/-0.3)x10(10), with the highest enhancement factor being achieved by using an individual nanoparticle. By using nanofabrication techniques, we eliminate the issues such as large size variations, cluster aggregation, and interparticle effects common in preparing SERS substrates using conventional chemical synthesis or batch fabrication methods. TNPRs produce very controllable and repeatable SERS signals at the desired locations and, thus, make an ideal candidate for device integration.     

Synthesis, characterization, and 3D-FDTD simulation of Ag@SiO2 nanoparticles for shell-isolated nanoparticle-enhanced Raman spectroscopy

Au-seed Ag-growth nanoparticles of controllable diameter (50-100 nm), and having an ultrathin SiO(2) shell of controllable thickness (2-3 nm), were prepared for shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). Their morphological, optical, and material properties were characterized; and their potential for use as a versatile Raman signal amplifier was investigated experimentally using pyridine as a probe molecule and theoretically by the three-dimensional finite-difference time-domain (3D-FDTD) method. We show that a SiO(2) shell as thin as 2 nm can be synthesized pinhole-free on the Ag surface of a nanoparticle, which then becomes the core. The dielectric SiO(2) shell serves to isolate the Raman-signal enhancing core and prevent it from interfering with the system under study. The SiO(2) shell also hinders oxidation of the Ag surface and nanoparticle aggregation. It significantly improves the stability and reproducibility of surface-enhanced Raman scattering (SERS) signal intensity, which is essential for SERS applications. Our 3D-FDTD simulations show that Ag-core SHINERS nanoparticles yield at least 2 orders of magnitude greater enhancement than Au-core ones when excited with green light on a smooth Ag surface, and thus add to the versatility of our SHINERS method.     

金银纳米粒子的复合组装及表面增强拉曼光谱研究

采用自组装技术在硅基底上进行金银纳米粒子的混合组装, 通过控制组装溶液中金银溶胶的体积比而控制基底上金银纳米粒子的密度. SEM结果显示金银呈亚单层均匀分布, 以吡啶为探针分子, 在不同波长的激发光下研究了纯金、银以及混合组装时的SERS效应. 利用金银在不同激发线下增强效应的不同以及探针分子吸附在金银纳米粒子表面主要谱峰相对强度差别的特点, 通过一系列校正以及差谱方法研究了金银共存时SERS效应的变化, 并分离出混合体系中金的增强行为, 结果表明在金银同时组装时吡啶的SERS谱峰特征主要表现为银纳米粒子的行为, 分离出的金SERS光谱特征接近银的行为, 说明金银纳米粒子之间产生了一定的耦合作用.     

Shedding Light on the Extinction‐Enhancement Duality in Gold Nanostar‐Enhanced Raman Spectroscopy

Surface‐enhanced Raman spectroscopy (SERS) has evolved from an esoteric physical phenomenon to a robust and effective analytical method recently. The need of addressing both the field enhancement and the extinction of nanoparticle suspensions, however, has been underappreciated despite its substantive impact on the sensing performance. A systematic experimental investigation of SERS enhancement and attenuation is performed in suspensions of gold nanostars, which exhibit a markedly different behavior in relation to conventional nanoparticles. The relationship is elucidated between the SERS enhancement and the localized surface plasmon resonance band, and the effect of the concentration of the gold nanostars on the signal propagation is investigated. It is shown that an optimal concentration of gold nanostars exists to maximize the enhancement factor (EF), and the maximum EF occurs when the LSPR band is blue‐shifted from the excitation wavelength rather than at the on‐resonance position.     

Raman and surface enhanced Raman microscopy of microstructured polyethylenimine/DNA multilayers

We analyze microstructured multilayer films of poly(ethyleneimine) (PEI) and DNA by employing Raman and surface enhanced Raman spectroscopy (SERS). The microstructuring of the samples allows a simultaneous measurement of signal and reference in a single analytic process. Silver nanoparticles are implemented in the microstructured multilayers for SERS measurements. The recorded SERS spectra of PEI/DNA are dominated by the Raman bands of the DNA bases which show a larger mean enhancement than bands belonging to DNA backbone vibrations. Our results show that the combination of SERS and microstructured multilayer films provides an adapted way to characterize the polyelectrolytes as well as to measure the enhancement factor and the distance dependence for the SERS active silver nanoparticles. Furthermore, microstructured polyelectrolyte films containing SERS active nanoparticles are used for sensing molecules.     

Raman spectroscopy on transition metals

Surface-enhanced Raman spectroscopy (SERS) has developed into one of the most important tools in analytical and surface sciences since its discovery in the mid-1970s. Recent work on the SERS of transition metals concluded that transition metals, other than Cu, Ag, and Au, can also generate surface enhancement as high as 4 orders of magnitude. The present article gives an overview of recent progresses in the field of Raman spectroscopy on transition metals, including experimental, theory, and applications. Experimental considerations of how to optimize the experimental conditions and calculate the surface enhancement factor are discussed first, followed by a very brief introduction of preparation of SERS-active transition metal substrates, including massive transition metal surfaces, aluminum-supported transition metal electrodes, and pure transition metal nanoparticle assembled electrodes. The advantages of using SERS in investigating surface bonding and reaction are illustrated for the adsorption and reaction of benzene on Pt and Rh electrodes. The electromagnetic enhancement, mainly lightning-rod effect, plays an essential role in the SERS of transition metals, and that the charge-transfer effect is also operative in some specific metal–molecule systems. An outlook for the field of Raman spectroscopy of transition metals is given in the last section, including the preparation of well-ordered or well-defined nanostructures, and core-shell nanoparticles for investigating species with extremely weak SERS signals, as well as some new emerging techniques, including tip-enhanced Raman spectroscopy and an in situ measuring technique. Figure Electric-field enhancement of a SERS-active Rh surface decorated with small nanohemispheres     

Nanoparticle-mirror sandwich substrates for surface-enhanced Raman scattering

Sandwich surface-enhanced Raman scattering (SERS) substrates (3S) utilizing coupling between continuous metal films and plasmonic particles were fabricated using silver mirrors, electrochemically roughened films, and various sizes of silver nanoparticles. The effect of excitation wavelength and nanoparticle size on SERS spectra of poly(vinylpyridine), selected as a model compound, was studied to determine the optimum conditions for the strongest SERS signal. The Raman enhancement resulted from the plasmon coupling of silver nanoparticles to the underlying continuous film as well as the lateral plasmon coupling between the silver nanoparticles. The formation of the charge transfer complex was also observed. The 3S configuration was used to obtain SERS spectra of dipicolinic acid (DPA), a chemical signature for Bacillus anthracis.     

Raman scattering of 4-aminobenzenethiol sandwiched between Ag/Au nanoparticle and macroscopically smooth Au substrate

Raman scattering measurements were conducted for a 4-aminobenzenethiol (4-ABT) monolayer assembled on a macroscopically smooth Au substrate. Although no peak was detected at the beginning, Raman peaks were distinctly observed by attaching Ag or Au nanoparticles onto the 4-ABT monolayer (Ag(Au)@4-ABT/Au(flat)). Considering the fact that no Raman signal is observed when Ag (Au) nanoparticles are adsorbed on a (4-aminophenyl)silane monolayer assembled on a silicon wafer, the Raman spectrum observed for Ag(Au)@4-ABT/Au(flat) must be a surface-enhanced Raman scattering (SERS) spectrum, derived from the electromagnetic coupling of the localized surface plasmon of Ag (Au) nanoparticles with the surface plasmon polariton of the underneath Au metal. The electromagnetic coupling responsible for SERS appeared to be governed more by the bulk Au substrate than the sparsely distributed Ag or Au nanoparticles. The chemical enhancement appeared on the other hand to be derived more from the formation of Au-S bonds than any charge-transfer interaction between the protonated amine group and the Au or Ag nanoparticles. The enhancement factors derived from the attachment of a single Ag or Au nanoparticle onto 4-ABT on Au were estimated to be as large as 8.3 x 10(5) and 5.0 x 10(5), respectively, (for the ring 3 band (b(2)) near 1390 cm(-1)) in which a factor of approximately 10(2) was presumed to be due to the chemical effect, with the remaining contributed by the electromagnetic effect.