Room Temperature Phosphorescence pH Switch Based on Photo-induced Electron Transfer

In this paper, photoinduced electron transfer(PET)phosphoroionophore,N-(1-bromo-2-naphthylmethyl)-dicthanolamine (BND)was synthesized and its phosphorescent characteristics were studied,The experimental results showed that strong phosphorescence could be observed in β-cyclodextrin apueous solution only at low pH value ,This system combined AND and NOT function to produce a three-input inhibit (INH)logic gate .     

Room temperature phosphorescence of α-bromonaphthalene induced by β-cyclodextrin in the presence of cyclohexane

β-Cyclodextrin (β-CD) can induce a-bromonaphthalene (BrN) to emit strong room temperature phosphorescence (RTP) in the presence of micro amounts of cyclohexane (c-hexane). Experiments of luminescence spectra, phosphorescence lifetime and fluorescence polarization prove the formation of c-hexane/β-CD/BrN ternary inclusion complex. The apparent formation constant of the ternary inclusion complex was determined and the effect mechanism of c-hexane on the RTP of BrN induced by β-CD is discussed.     

Room temperature phosphorescence from natural products: Crystallization matters

Efficient room temperature phosphorescence is observed in natural compounds and polymers such as starch, cellulose, bovine serum albumin (BSA), and some other carbohydrates. Whereas being practically nonluminescent in solutions and TLC plates, they emit bright phosphorescence in the crystalline states with lifetime up to microseconds, exhibiting crystallization-induced phosphorescence (CIP) characteristics. The CIP of these natural products without any conventional chromophores offers a new platform for the exploration of conceptually novel luminogens.     

Subtle structure tailoring of metal-free triazine luminogens for highly efficient ultralong organic phosphorescence

Highly efficient ultralong organic phosphorescence (UOP) based on a series of metal-free triazine luminogens was achieved via subtly structural tailoring of bromine substituted positions.Impressively,p-BrAT in solid state displayed high phosphorescence efficiency up to 9.7% with a long lifetime of 386 ms,which was one of the highest efficient UOP materials reported so far in metal-free compounds.     

Carbon dots confined in 3D polymer network: Producing robust room temperature phosphorescence with tunable lifetimes

Room temperature phosphorescence(RTP) is important in both organic electronics and encryption. Despite rapid advances, a universal approach to robust and tunable RTP materials based on amorphous polymers remains a formidable challenge. Here, we present a strategy that uses three-dimensional(3 D)confinement of carbon dots in a polymer network to achieve ultra-long lifetime phosphorescence. The RTP of the as-obtained materials was not quenched in different polar organic solvents and the lifetime o...     

Metal Ion Enhanced Phosphorescence of 2,3—Naphtho—10—aza—15—crown—5：A Possible Molecular Photonic Operator

A novel crown ether,2,3-naphtho-10-aza-15-crown-5(NAC) was synthesized.This compound does not show strong fluorescence and phosphorescence due to photoinduced intramolecular electron transfer from the nitrogen lone pair of electrons to the singlet excited state of the naphthalene chromophore.Complexation with heavy-metal ions results in the quenching of the fluorescence and enhancement of the phosphorescence significantly.These observations were interpreted in terms of the binding interactions,between the nitrogen lone pair electrons and the metal cation,which prevent photoinduced intramolecular electron transfer,and the heavy-atom effects which induce quenching of the fluorescence and enhancement of the phosphorescence.These azacrown and heavy-metalbased systems could be useful as potential chemical sensors and molecular photonic devices.     

Determination of trace arsenic(V) by catalytic solid substrate-room temperature phosphorescence quenching method

In the H2SO4 medium and in the presence of dodecylbenzene sulfonic acid sodiumsalt (DBS), dimethyl yellow (R) could emit strong and stable solid substrate room temperature phosphorescence (RTP) on filter paper. And NaIO4 could oxidize R to cause the RTP quenching. Arsenic(V) could catalyze the reaction of NaIO4 oxidizing R, which caused the RTP sharply quenching. The reducing value of phosphorescence intensity (△Ip) for the system with DBS is 3.3 times higher than that without DBS. Moreover, the△Ip is proportional to the concentration of As(V). Based on the facts above, a new RTP quenching method for the determination of trace As(V) has been established.     

Crystallization-induced phosphorescence of benzils at room temperature

Efficient room temperature phosphorescence (RTP) is rarely observed in pure organic luminogens. However, we have newly observed that benzil and its derivatives are nonluminescent in solvents and thin layer chromatography (TLC) plates, but become highly phosphorescent in crystal state at room temperature, exhibiting typical crystallization-induced phosphorescence (CIP) characteristics. The CIP phenomenon is ascribed to the restriction of intramolecular rotations in crystals owing to effective intermolecular interactions. Such intermolecular interactions greatly rigidify the molecular conformation and significantly decrease the nonradiative deactivation channels of the triplet excitons, thus giving boosted phosphorescent emission at room temperature.     

In-situ cation exchange enhances room temperature phosphorescence of a family of metal-organic frameworks

The rational designability and chemical tunability of metal-organic frameworks(MOFs)are enabling tributes to efficaciously enhance their room temperature phosphorescence(RTP)performance.A family of stable anionic MOFs,[Zn₂(4,5-ImDC)₂]M₂(NKU-132,M=(CH₃)₂NH₂or(CH₂CH₃)₂NH₂),featuring significant RTP have been synthesized.By rational cation selection and in-situ replacement from dimethylammonium to diethylammonium,the phosphorescence lifetime is increased from 30.88 to126.3 ms,along with less sensitivity to air.This work provides an anti-quenching and lifetime tuning example for RTP-MOFmaterials via facile host-guest chemistry.     

Metal nanoparticle-enhanced room temperature phosphorescence of diiodofluorescein on the filter paper substrate

<正>Metal-enhanced room temperature phosphorescence of diiodofluorescein was first observed on filter paper surface.The phosphorescence intensity is 2.5-fold brighter from diiodofluorescein on silver nanoparticles-deposited filter paper as compared with an identical control sample without silver nanoparticles.Furthermore,enhanced absorption was also observed for the same system.Our findings suggest that both singlet and triplet states can couple to surface plasmons and enhance phosphorescence quantum yields at room temperature,as well as to increase the excitation rate of lumophores at room temperature.     

Room Temperature Phosphorescence of 1-Bromo-4-(bromoacetyl)naphthalene Induced by Sodium Deoxycholate

Sodium deoxycholate (NaDOC) can induce 1-bromo-4-(bromoacetyl)naphthalene (BBAN) to undergo strong room temperature phosphorescence (RTP) without the removal of dissolved oxygen from the solution. RTP spectra, phosphorescence polarization and ¹³C NMR results, along with the molecular modeling calculations, supported the conclusion that BBAN molecule was combined in a sandwich with two NaDOC molecules by a “back-to-back” hydrophobic interaction arising from the apolar faces of the NaDOC molecules, which provided BBAN with a rigid enough microenvironment to produce RTP.     

Synthesis and characterization of several dicopper(I) complexes and a spin-delocalized dicopper(I,II) mixed-valence complex using a 1,8-naphthyridine-based dinucleating ligand

The synthesis of dicopper(I) complexes [Cu2(BBAN)(MeCN)2](OTf)2 (1), [Cu2(BBAN)(py)2](OTf)2 (2), [Cu2(BBAN)(1-Me-BzIm)2](OTf)2 (3), [Cu2(BBAN)(1-Me-Im)2](OTf)2 (4), and [Cu2(BBAN)(mu-O2CCPh3)](OTf) (5), where BBAN = 2,7-bis((dibenzylamino)methyl)-1,8-naphthyridine, py = pyridine, 1-Me-Im = 1-methylimidazole, and 1-Me-BzIm = 1-methylbenzimidazole, are described. Short copper-copper distances ranging from 2.6151(6) to 2.7325(5) A were observed in the solid-state structures of these complexes depending on the terminal ligands used. The cyclic voltammogram of compound 5 dissolved in THF exhibited a reversible redox wave at E1/2 = -25 mV vs Cp2Fe+/Cp2Fe. When complex 5 was treated with 1 equiv of silver(I) triflate, a mixed-valence dicopper(I,II) complex [Cu2(BBAN)(mu-O2CCPh3)(OTf)](OTf) (6) was prepared. A short copper-copper distance of 2.4493(14) A observed from the solid-state structure indicates the presence of a copper-copper interaction. Variable-temperature EPR studies showed that complex 6 has a fully delocalized electronic structure in frozen 2-methyltetrahydrofuran solution down to liquid helium temperature. The presence of anionic ligands seems to be an important factor to stabilize the mixed-valence dicopper(I,II) state. Compounds 1-4 with neutral nitrogen-donor terminal ligands cannot be oxidized to the mixed-valence analogues either chemically or electrochemically.     

A novel method for preparing silver nanoparticle-hydrogel nanocomposites via pH-induced self-assembly

We present a novel and facile method to fabricate the silver nanoparticle (AgNP)-sodium deoxycholate (NaDOC) hybrid hydrogel from the NaDOC-stablized AgNP colloidal hydrosol via the pH-induced self-assembly.     

Modeling features of the non-heme diiron cores in O2-activating enzymes through the synthesis, characterization, and oxidation of 1,8-naphthyridine-based complexes

Multidentate naphthyridine-based ligands were used to prepare a series of diiron(II) complexes. The compound [Fe(2)(BPMAN)(mu-O(2)CPh)(2)](OTf)(2) (1), where BPMAN = 2,7-bis[bis(2-pyridylmethyl)aminomethyl]-1,8-naphthyridine, exhibits two reversible oxidation waves with E(1/2) values at +310 and +733 mV vs Cp(2)Fe(+)/Cp(2)Fe, as revealed by cyclic voltammetry. Reaction with O(2) or H(2)O(2) affords a product with optical and M?ssbauer properties that are characteristic of a (mu-oxo)diiron(III) species. The complexes [Fe(2)(BPMAN)(mu-OH)(mu-O(2)CAr(Tol))](OTf)(2) (2) and [Fe(2)(BPMAN)(mu-OMe)(mu-O(2)CAr(Tol))](OTf)(2) (3) were synthesized, where Ar(Tol)CO(2)(-) is the sterically hindered ligand 2,6-di(p-tolyl)benzoate. Compound 2 has a reversible redox wave at +11 mV, and both 2 and 3 react with O(2), via a mixed-valent Fe(II)Fe(III) intermediate, to give final products that are also consistent with (mu-oxo)diiron(III) species. The paddle-wheel compound [Fe(2)(BBAN)(mu-O(2)CAr(Tol))(3)](OTf) (4), where BBAN = 2,7-bis(N,N-dibenzylaminomethyl)-1,8-naphthyridine, reacts with dioxygen to yield benzaldehyde via oxidative N-dealkylation of a benzyl group on BBAN, an internal substrate. In the presence of bis(4-methylbenzyl)amine, the reaction also produces p-tolualdehyde, revealing oxidation of an external substrate. A structurally related compound, [Fe(2)(BEAN)(mu-O(2)CAr(Tol))(3)](OTf) (5), where BEAN = 2,7-bis(N,N-diethylaminomethyl)-1,8-naphthyridine, does not undergo N-dealkylation, nor does it facilitate the oxidation of bis(4-methylbenzyl)amine. The contrast in reactivity of 4 and 5 is attributed to a difference in accessibility of the substrate to the diiron centers of the two compounds. The M?ssbauer spectroscopic properties of the diiron(II) complexes were also investigated.     

New reactions of 1-alkynes catalyzed by transition metal complexes

Recently discovered catalytic reactions with ruthenium and lanthanide metal complexes have extended the scope of 1-alkynes as useful reagents. The specific formation of aryl-substituted (Z)-1,3-enzymes via the dimerization of HC(triple bond) CR(1) (R(1) = aryl) has been attained using dimeric lanthanide complexes, the catalytic activity of which appears to be unaffected by time. The dimerization of HC(triple bond) CR(2) (R(2) = t-Bu, SiMe(3)) catalyzed by Ru(cod)(cot)/PR(3) or RuH(2)(PPh(3))(3) produces a good yield of butatrienes (Z)R(2)CH=C=C=CHR(2) with a high degree of selectivity. Under certain conditions, HC(triple bond) C=SiMe(3) dimerizes to yield exclusively (Z)-M(3)Si-C(triple bond) C-CH=CH-SiMe(3). The hydration of HC(triple bond)CR(3) (R(3) = alkyl, aryl) catalyzed by RuCl(2)/PR'(3) or CpRuCl(PR"(3))(2) has realized the first example of anti-Markovnikov regioselectivity in an addition reaction of water that produces aldehydes R(3)CH(2)bond;CHO. The application of this reaction to propargylic alcohols has lead to their formal isomerization to alpha,beta-unsaturated aldehydes. In contrast, the addition of amines R(4)bond;NH(2) (R(4) = aryl) to HCtbond;CR(5) (R(5) = alkyl, aryl) conforms to Markovnikov's rule to produce ketimines R(5)bond;(C=NR(4))bond;CH(3) when catalyzed by a Ru(3)(CO)(12)/additive. Since the reaction can be performed in air without the need for any solvents, it enables the practical synthesis of aromatic ketimines, which are difficult to prepare by conventional methods. The synthesis of indoles using deactivated anilines is one practical application of this reaction. The mechanisms of some of these reactions have been analyzed in detail with the aid of theoretical calculations.     

HP-Ca2Si5N8--a new high-pressure nitridosilicate: synthesis, structure, luminescence, and DFT calculations

HP-Ca(2)Si(5)N(8) was obtained by means of high-pressure high-temperature synthesis utilizing the multianvil technique (6 to 12 GPa, 900 to 1200 degrees C) starting from the ambient-pressure phase Ca(2)Si(5)N(8). HP-Ca(2)Si(5)N(8) crystallizes in the orthorhombic crystal system (Pbca (no. 61), a=1058.4(2), b=965.2(2), c=1366.3(3) pm, V=1395.7(7)x10(6) pm(3), Z=8, R1=0.1191). The HP-Ca(2)Si(5)N(8) structure is built up by a three-dimensional, highly condensed nitridosilicate framework with N([2]) as well as N([3]) bridging. Corrugated layers of corner-sharing SiN(4) tetrahedra are interconnected by further SiN(4) units. The Ca(2+) ions are situated between these layers with coordination numbers 6+1 and 7+1, respectively. HP-Ca(2)Si(5)N(8) as well as hypothetical orthorhombic o-Ca(2)Si(5)N(8) (isostructural to the ambient-pressure modifications of Sr(2)Si(5)N(8) and Ba(2)Si(5)N(8)) were studied as high-pressure phases of Ca(2)Si(5)N(8) up to 100 GPa by using density functional calculations. The transition pressure into HP-Ca(2)Si(5)N(8) was calculated to 1.7 GPa, whereas o-Ca(2)Si(5)N(8) will not be adopted as a high-pressure phase. Two different decomposition pathways of Ca(2)Si(5)N(8) (into Ca(3)N(2) and Si(3)N(4) or into CaSiN(2) and Si(3)N(4)) and their pressure dependence were examined. It was found that a pressure-induced decomposition of Ca(2)Si(5)N(8) into CaSiN(2) and Si(3)N(4) is preferred and that Ca(2)Si(5)N(8) is no longer thermodynamically stable under pressures exceeding 15 GPa. Luminescence investigations (excitation at 365 nm) of HP-Ca(2)Si(5)N(8):Eu(2+) reveal a broadband emission peaking at 627 nm (FWHM=97 nm), similar to the ambient-pressure phase Ca(2)Si(5)N(8):Eu(2+).     

Eta6-mesityl,eta1-imidazolinylidene-carbene-ruthenium(II) complexes: catalytic activity of their allenylidene derivatives in alkene metathesis and cycloisomerisation reactions

The reaction of electron-rich carbene-precursor olefins containing two imidazolinylidene moieties [(2,4,6-Me(3)C(6)H(2)CH(2))NCH(2)CH(2)N(R)Cdbond;](2) (2a: R=CH(2)CH(2)OMe, 2 b R=CH(2)Mes), bearing at least one 2,4,6-trimethylbenzyl (R=CH(2)Mes) group on the nitrogen atom, with [RuCl(2)(arene)](2) (arene=p-cymene, hexamethylbenzene) selectively leads to two types of complexes. The cleavage of the chloride bridges occurs first to yield the expected (carbene) (arene)ruthenium(II) complex 3. Then a further arene displacement reaction takes place to give the chelated eta(6)-mesityl,eta(1)-carbene-ruthenium complexes 4 and 5. An analogous eta(6)-arene,eta(1)-carbene complex with a benzimidazole frame 6 was isolated from an in situ reaction between [RuCl(2)(p-cymene)](2), the corresponding benzimidazolium salt and cesium carbonate. On heating, the RuCl(2)(imidazolinylidene) (p-cymene) complex 8, with p-methoxybenzyl pendent groups attached to the N atoms, leads to intramolecular p-cymene displacement and to the chelated eta(6)-arene,eta(1)-carbene complex 9. On reaction with AgOTf and the propargylic alcohol HCtbond;CCPh(2)OH, compounds 4-6 were transformed into the corresponding ruthenium allenylidene intermediates (4-->10, 5-->11, 6-->12). The in situ generated intermediates 10-12 were found to be active and selective catalysts for ring-closing metathesis (RCM) or cycloisomerisation reactions depending on the nature of the 1,6-dienes. Two complexes [RuCl(2)[eta(1)-CN(CH(2)C(6)H(2)Me(3)-2,4,6)CH(2)CH(2)N- (CH(2)CH(2)OMe)](C(6)Me(6))] 3 with a monodentate carbene ligand and [RuCl(2)[eta(1)-CN[CH(2)(eta(6)-C(6)H(2)Me(3)-2,4,6)]CH(2)CH(2)N-(CH(2)C(6)H(2)Me(3)-2,4,6)]] 5 with a chelating carbene-arene ligand were characterised by X-ray crystallography.     

Intermolecular alkene and alkyne hydroacylation with beta-S-substituted aldehydes: mechanistic insight into the role of a hemilabile P-O-P ligand

A straightforward to assemble catalytic system for the intermolecular hydroacylation reaction of beta-S-substituted aldehydes with activated and unactivated alkenes and alkynes is reported. These catalysts promote the hydroacylation reaction between beta-S-substituted aldehydes and challenging substrates, such as internal alkynes and 1-octene. The catalysts are based upon [Rh(cod)(DPEphos)][ClO(4)] (DPEphos=bis(2-diphenylphosphinophenyl)ether, cod=cyclooctadiene) and were designed to make use of the hemilabile capabilities of the DPEphos ligand to stabilise key acyl-hydrido intermediates against reductive decarbonylation, which results in catalyst death. Studies on the stoichiometric addition of aldehyde (either ortho-HCOCH(2)CH(2)SMe or ortho-HCOC(6)H(4)SMe) and methylacrylate to precursor acetone complexes [Rh(acetone)(2)(DPEphos)][X] [X=closo-CB(11)H(6)Cl(6) or [BAr(F) (4)] (Ar(F)=3,5-(CF(3))(2)C(6)H(3))] reveal the role of the hemilabile DPEphos ligand. The crystal structure of [Rh(acetone)(2)(DPEphos)][X] shows a cis-coordinated diphosphine ligand with the oxygen atom of the DPEphos distal from the rhodium. Addition of aldehyde forms the acyl hydride complexes [Rh(DPEphos)(COCH(2)CH(2)SMe)H][X] or [Rh(DPEphos)(COC(6)H(4)SMe)H][X], which have a trans-spanning DPEphos ligand and a coordinated ether group. Compared to analogous complexes prepared with dppe (dppe=1,2-bis(diphenylphosphino)ethane), these DPEphos complexes show significantly increased resistance towards reductive decarbonylation. The crystal structure of the reductive decarbonylation product [Rh(CO)(DPEphos)(EtSMe)][closo-CB(11)H(6)I(6)] is reported. Addition of alkene (methylacrylate) to the acyl-hydrido complexes forms the final complexes [Rh(DPEphos)(eta(1)-MeSC(2)H(4)-eta(1)-COC(2)H(4)CO(2)Me)][X] and [Rh(DPEphos)(eta(1)-MeSC(6)H(4)-eta(1)-COC(2)H(4)CO(2)Me)][X], which have been identified spectroscopically and by ESIMS/MS. Intermediate species in this transformation have been observed and tentatively characterised as the alkyl-acyl complexes [Rh(CH(2)CH(2)CO(2)Me)(COC(2)H(4)SMe)(DPEphos)][X] and [Rh(CH(2)CH(2)CO(2)Me)(COC(6)H(4)SMe)(DPEphos)][X]. In these complexes, the DPEphos ligand is now cis chelating. A model for the (unobserved) transient alkene complex that would result from addition of alkene to the acyl-hydrido complexes comes from formation of the MeCN adducts [Rh(DPEphos)(MeSC(2)H(4)CO)H(MeCN)][X] and [Rh(DPEphos)(MeSC(6)H(4)CO)H(MeCN)][X]. Changing the ligand from DPEphos to one with a CH(2) linkage, [Ph(2)P(C(6)H(4))](2)CH(2), gave only decomposition on addition of aldehyde to the acetone precursor, which demonstrated the importance of the hemiabile ether group in DPEphos. With [Ph(2)P(C(6)H(4))](2)S, the sulfur atom has the opposite effect and binds too strongly to the metal centre to allow access to productive acetone intermediates.     

Isolation of rhenium and ReOx species within ZSM5 channels and their catalytic function in the activation of alkanes and alkanols

Synthesis protocols, structures, and reactivity of Re-oxo species grafted onto H-ZSM5, and their subsequent conversion to Re-clusters through contact with H2 or CH4 were studied by using Raman, infrared, and X-ray absorption spectroscopies. Reactivity measurements by using alkane and alkanol reactants were also examined. Sublimation of Re(2)O(7) at 723 K led to a stoichiometric exchange with each ReO(x) species replacing one proton. Raman features for Re(2)O(7) disappeared during thermal treatment and Raman bands assigned to distorted-tetrahedral Si-O(f)ReO(3)-Al (O(f): zeolite-lattice oxygen atoms) species emerged; infrared bands for acidic OH groups in H-ZSM5 weakened concurrently. X-ray absorption near-edge and fine-structure spectra detected the formation of distorted-tetrahedral Re7+-oxo species during thermal treatment of Re(2)O(7)/H-ZSM5 mixtures in air, and their subsequent reduction to Re(0) in H2 or CH4 to form encapsulated Re metal clusters similar in diameter (approximately 8 A) to the channel intersections in ZSM5. Si-O(f)ReO(3)-Al species in ReO(x)-ZSM5 catalyzed the oxidative conversion of C(2)H(5)OH to acetaldehyde, acetal, and ethyl acetate with very low selectivity to CO(x) (<1 %). Unprecedented turnover rates were exhibited at temperatures much lower than previously found for ReO(x)-based catalysts, and without deactivation or sublimation processes ubiquitous in crystalline Re7+ compounds at temperatures required for catalysis. Encapsulated Re metal clusters formed by the reduction of Si-O(f)ReO(3)-Al precursors led to CH4 pyrolysis and C(3)H(8) dehydrocyclodimerization rates (per Re) that are higher than those previously reported for zeolite-based catalysts. The rate of CH4 conversion to benzene, by using Re-ZSM5, was approximately 30 % higher than that of the best reported catalysts, based on encapsulated MoC(x) clusters, whereas C(2)H(4) and C6+ arene selectivities were similar. C(3)H(8) activity and selectivity of Re-ZSM5 was significantly higher than that of Ga-ZSM5, the best reported catalyst for these reactions. Reaction rates (per Re) were independent of the Re/Al(f) (Al(f): aluminum framework) ratio for both Re and ReO(x) species. This is consistent with the uniform character of the structures formed during grafting of the ReO(x) species through sublimation and their ability to retain their homogeneity even after their reduction to encapsulated Re-clusters.     

Sensing the chirality of Dawson lanthanide polyoxometalates [alpha1-LnP2W17O61]7- by multinuclear NMR spectroscopy

Lanthanide complexes of the chiral Dawson phosphotungstate [alpha(1)-P(2)W(17)O(61)](10-) were used to study the formation of diastereomers with optically pure organic ligands. The present work started with the full assignment of the (183)W NMR spectra of [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-) at different temperatures and concentrations, which allowed the structure of the dimerized form in aqueous solution to be established. Different enantiopure amino acids and phosphonic acids were screened as ligands. Both types allowed chiral differentiation by multinuclear NMR spectroscopy under fast-exchange conditions. Functional groups with a good affinity for the oxo framework of the polyoxometalate were identified, and maps of the interactions between L-serine and N-phosphonomethyl-L-proline with [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-) were established. This demonstrates the power of (183)W NMR spectroscopy to elucidate the molecular recognition of inorganic molecules by organic compounds. N-Phosphonomethyl-L-proline appears to be a convenient ligand to promote separation of the diastereomers and ultimately resolution of the enantiomers of [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-).