Excitation of terahertz surface polaritons in a cylindrical waveguide by femtosecond laser pulses

Generation of terahertz surface polaritons in homogeneous round cross-section plasma waveguides upon nonlinear optical rectification of femtosecond laser pulses is analyzed theoretically. It is assumed that nonlinear polarization inducing a surface electromagnetic wave is formed at the waveguide boundary in a thin layer of the nonlinear dielectric that surrounds the waveguide. The efficiency of the femtosecond radiation conversion into surface polaritons is studied as a function of the waveguide radius and duration of the exciting laser pulse.     

Nonlinear femtosecond pulse reshaping in waveguide arrays

We observe nonlinear pulse reshaping of femtosecond pulses in a waveguide array owing to coupling between waveguides. Amplified pulses from a mode-locked fiber laser are coupled to an AlGaAs core waveguide array structure. The observed power-dependent pulse reshaping agrees with theory, including shortening of the pulse in the central waveguide.     

Photonic waveguide structures in photorefractive lithium niobate with pyroelectric mechanism of nonlinear response

Compensation for the nonlinear diffraction of narrow laser beams with wavelengths of 532 and 633nm and the formation of photonic waveguides and waveguide circuits due to the contribution of pyroelectric effect to the nonlinear response of lithium niobate crystal have been experimentally demonstrated. Complete compensation for the linear and nonlinear diffraction broadening of light beams is obtained upon uniform heating of an undoped sample from room temperature to 55?C.     

Thermally induced dephasing of high power second harmonic generation in MgO:LiNbO3 waveguides

High power second harmonic generation(SHG) in MgO-doped LiNbO3 waveguides is investigated using a three-dimensional(3D) coupled thermo-optical model.Simulations performed for a 1111.6-nm fundamental laser show the in?uence of the absorptions and the thermally induced dephasing on the conversion efficiencies of the different waveguides.The onset of the thermally induced dephasing effect for each waveguide is also indicated.As a result of high light intensity in the waveguide,nonlinear absorptions are identified as the possible main factors in efficiency losses in specific cases.     

Fabrication of hollow optical waveguides in fused silica by three-dimensional femtosecond laser micromachining

We report on the fabrication of hollow optical waveguides in fused silica using femtosecond laser micromachining. We show that in such hollow waveguides, high-intensity femtosecond laser beams can be guided with low optical loss. Our technique, which was established earlier for fabrication of optofluidic structures in glass, can ensure a high smoothness at the inner surfaces of the hollow waveguides and provide the unique capability of fabrication of hollow waveguides with complex geometries and configurations. A transmission of ∼90% at 633 nm wavelength is obtained for a 62-mm-long hollow waveguide with an inner diameter of ∼250 μm. In addition, nonlinear propagation of femtosecond laser pulses in the hollow waveguide is demonstrated, showing that the spectral bandwidth of the femtosecond pulses can be broadened from ∼27.2 to ∼55.7 nm.     

Manufacturing of Nd:Gd3Ga5O12 ridge waveguide lasers by pulsed laser deposition and ultrafast laser micromachining

Laser radiation is used both for the deposition of the laser active thin films and for the micro structuring to define wave guiding structures for the fabrication of waveguide lasers. Thin films of crystalline and amorphous neodymium doped Gd₃Ga₅O₁₂ are grown on single crystal yttrium aluminium garnet by pulsed laser deposition using excimer laser radiation.Manufacturing of the laser active waveguides by micro structuring is done using femtosecond laser ablation of the deposited films. The structural and optical properties of the films and the morphology of the structured waveguides are determined in view of the design and the fabrication of compact and efficient diode pumped waveguide lasers. The resulting waveguides are polished, provided with resonator mirrors, pumped using diode lasers and the waveguide lasers are characterized. The spectroscopic properties of the amorphous waveguide are investigated and an infrared waveguide laser is demonstrated. To our knowledge, there have been no reports by other groups of the successful operation of a structured waveguide laser fabricated by this technique or of a waveguide laser made from amorphous neodymium doped Gd₃Ga₅O₁₂.     

基于硅波导的喇曼光放大器

在硅波导上添加反向偏压的PIN结构,当波导产生受激喇曼散射时,可以将波导中双光子吸收(TPA)产生的光生自由载流子扫出波导,降低了波导的非线性损失,极大地提高了硅波导中泵浦光对信号光的喇曼增益。为了应用已经非常成熟的硅工艺,并且应用硅波导使器件小型化,根据法布里-帕罗(F-P)腔和行波放大器理论,在硅波导两端的解理面蒸镀增透膜,应用这种波导的喇曼效应设计了一种光放大器,即基于硅波导的喇曼光放大器。建立了计算放大器增益的方程,给出了不同波导长度和输入功率情况下的放大器增益,得出适当增加波导长度和泵浦光功率可以得到较高喇曼增益的结论。基于硅的光放大器有较高的饱和功率且没有泵浦源的限制,通过调整泵浦激光的波长可以放大不同波长的信号光。     

Wave propagation in parallel-plate waveguides filled with nonlinear left-handed material

A theoretical investigation of field components for transverse electric mode in the parallel-plate waveguides has been studied. In this analysis two different types of waveguide structures have been discussed, i.e., (a) normal good/perfect conducting parallel-plate waveguide filled with nonlinear left-handed material and (b) high-temperature-superconducting parallel-plate waveguide filled with nonlinear left-handed material. The dispersion relations of transverse electric mode have also been discussed for these two types of waveguide structures.     

Laser-assisted fabrication of new slab-coupled lithium niobate optical waveguide

Recently a new type of lithium niobate waveguide was suggested for potential nonlinear optic applications. The waveguide consists of a uniform large core and a leaky coupled slab for realizing a lateral optical confinement to support the fundamental spatial mode propagation. Inside the waveguide, the slab layer is required to have a refractive index slightly lower than that of the core, but higher than that of the substrate. Lithium niobate doped with magnesium oxides shows an increased refractive index that is dependent on the dopant's concentration. Therefore, in order to fabricate such waveguides, the pulsed laser deposition approach was used to study the growth of such composition-modified lithium niobate as the slab layer. The as-grown films were characterized on its expitaxy, structure, and optical performance, via X-ray diffraction analysis, optical guiding experiment, etc.     

MZ-MMI-based all-optical switch using nonlinear coupled waveguides

We propose an all-optical switch (AOS) based on Mach-Zehnder (MZ) and Multi-mode interference (MMI) using nonlinear closely coupled waveguides. The device operates by switching between two states of coupled waveguides. In first state the refractive index of waveguides are same and light field will completely couple to nonlinear waveguide in half length of coupler and will back in the second half. We will have π phase difference in this procedure and the input field will appear in Bar-state output. In the second state the refractive index of nonlinear waveguide increase with high intensity control field. In this case, we have lower coupling and change in phase. But, we choose the best refractive index change to obtain the phase change of multiple of 2π necessary for Cross-state in output. The beam propagation method is used to simulate the device operation.     

An azobenzene functionalized polymer for laser direct writing waveguide fabrication

We report on non-lithographic laser direct writing fabrication of optical waveguides by using a 4′-hydroxy-4-nitroazobene dye-functionalized polymer film. The polymer film reveals permanent change of refractive index at high laser illumination intensity. A focused continuous wave low power green laser beam at 532 nm wavelength is used to directly write waveguide structures on the polymer film. The magnitude of refractive index increase at film surface is about 0.006. One-step laser writing results in graded index waveguides in film depth direction under ambient conditions without pre- and post-processing. As a by-product, the laser writing also results in a very small air valley at the boundary between the laser written and non-written regions which may contribute in part although minimal to the waveguide lateral confinement and can be used for visual observation of waveguide patterns. The fabricated waveguide is found to be stable and easily reproducible.     

Ultrafast laser waveguide writing: Lithium niobate and the role of circular polarization and picosecond pulse width

For the first time to our knowledge, ultrafast laser writing has generated room-temperature stable guided-wave optics in bulk lithium niobate for the telecommunication spectrum. Among a seven-dimensional parameter space for waveguide optimization, two frequently overlooked parameters, pulse duration and polarization, were found to be key in overcoming undesired nonlinear optical responses imposed by this material. Single-mode waveguides were best formed with circularly polarized light having a relatively long pulse duration of approximately 1.0 ps. The waveguides were highly polarization dependent and guided in both telecommunication bands near 1300 and 1550 nm, exhibiting losses as low as 0.7 dB/cm.     

Analysis of difference frequency generation and cascaded second-harmonic generation and difference frequency generation in lossy quasi-phase-matched semiconductor waveguides

The analytical expressions of converted wave power for difference frequency generation (DFG), cascaded second-harmonic generation and difference frequency generation (cSHG/DFG) processes have been obtained under the non-depletion approximation in lossy waveguides. It is shown that the analytical results and the numerical simulation with depletion agree very well for lossy waveguides. Employing the analytical solutions, the formulas of optimized waveguide lengths in lossy waveguides are obtained for DFG and cSHG/DFG processes. After designing an AlGaAs quasi-phase-matched ridge waveguide, we investigate and compare the characteristics of the second-order nonlinear effects with and without waveguide loss, such as conversion efficiency, conversion bandwidth, pump wavelength tolerance and temperature stability in detail.     

Dispersion characteristics of SOI-based slot optical waveguides

The invention of the slot waveguide had enabled a number of interesting novel linear or nonlinear optical applications by guiding light in nanometers-wide low index slots guarded by high-index slabs. As one of its key characteristics, the low modal index for this kind of waveguides has been demonstrated by many studies. However, their higher order dispersion properties have not been thoroughly investigated yet, while the growing size and complexity of these devices and their potential nonlinear optical applications involving short optical pulses demand further understanding in their dispersion behavior. We here carry out a numerical study on the higher order dispersion characteristics of the SOI-based slot structures around the 1550 nm wavelength. Our results show that they could have significantly different second order dispersion properties in contrast to the traditional channel SOI waveguides. Their potentially large normal dispersion could have an impact on various nonlinear or linear applications. The relationship between the dispersion performance and the waveguide design is also investigated, and the results could show further venues to optimize or control the dispersion properties of such waveguides.     

Low-loss waveguides written with a femtosecond laser for flexible interconnection in a planar light-wave circuit

We describe a low-loss single-mode waveguide in planar light-wave circuit (PLC) glass doped with boron and phosphorus, which is more difficult to write than pure-silica glass. The written waveguide has a rectangular core, a symmetric near-field pattern, and a propagation loss of 0.35 dB/cm. The loss that originates from the mode-field mismatch between the mode-field diameters of the written and the PLC waveguides is less than 0.1 dB/point. In addition, we successfully connected PLC waveguides with a 500-microm-long waveguide written with a laser. The laser-written waveguide can flexibly connect PLC waveguides with a low coupling loss.     

Femtosecond laser direct writing of multiwavelength Bragg grating waveguides in glass

Novel Bragg grating waveguide structures have been fabricated in bulk borosilicate glass through a type II photosensitivity mechanism driven by single femtosecond laser pulses. Low-loss single-mode waveguides and narrow-linewidth Bragg gratings were generated simultaneously by forming an array of refractive index voxels in a single laser scan. Laser pulse duration is shown to significantly affect the grating strength and waveguide loss. Bragg wavelengths, defined by the periodicity of laser-modified volumes, were fully controlled by the sample scan speed to provide resonances anywhere in the 1200-1620 nm telecommunication bands. Four linear Bragg filters with distinct resonant wavelengths are presented that define the first demonstration of laser writing of multiple-wavelength and cascaded Bragg grating waveguides in a single process step.     

Second harmonic generation from precise diamond blade diced ridge waveguides

Carbon ion irradiation and precise diamond blade dicing are applied to fabricate Nd:GdCOB ridge waveguides. The propagation properties of the fabricated Nd:GdCOB waveguides are investigated through experiments and theoretical analysis. Micro-Raman analysis reveals that the Nd:GdCOB crystal lattice expands during the irradiation process. Micro-second harmonic spectroscopic analysis suggests that the original nonlinear properties of the Nd:GdCOB crystal are greatly enhanced within the waveguide volume. Under pulsed 1064 nm laser pumping, second harmonic generation (SHG) at 532 nm has been achieved in the fabricated waveguides. The maximum SHG conversion efficiencies are determined to be ～ 8.32 %·W^-1 and ～ 22.36 %·W^-1 for planar and ridge waveguides, respectively.     

Depressed cladding, buried waveguide laser formed in a YAG:Nd3+ crystal by femtosecond laser writing

Depressed cladding waveguides have been formed in laser crystals by a tightly focused beam of a femtosecond laser. A laser based on a depressed cladding waveguide in a neodymium-doped YAG crystal has been demonstrated for what is believed to be the first time.     

Planar waveguide lasers and structures created by laser ablation — an overview

The parameters of planar and channel waveguide lasers fabricated by different techniques are reviewed. Materials and properties of thin films used for creation of planar waveguide lasers are summarized. The parameters of active and passive planar waveguides created by the method of pulsed laser deposition and problems of laser deposition are described. The aspects of laser generation of planar waveguide lasers, resonators and channel waveguides are presented. The results of our experiments of laser deposition of thin Ti:sapphire layers and thin layers of Nd:YAG and Nd:YAP are briefly discussed. This work was supported by the grant of Czech Grant Agency No. 102/96/0429.     

非线性平板光波导中TM波的网络分析

用横向等效网络方法分析了非线性平板波导中TM的色散关系和场分布.这种方法基于传输线理论,把非线性介质波导中复杂的电磁场问题等效于电路网络问题,用横向谐振技术得到色散方程.用数值方法计算了不同非线性机制下三层平板非线性波导中的TM波传输特性.