C60分子在有序-无序和玻璃态相变间的取向概率与弛豫行为

用极限动力学模型研究了C60分子在有序-无序相变和玻璃态相变温度区间取向角为98°和38°的取向概率与温度的关系.计算结果在玻璃态相变点附近的85!K,90!K和有序-无序相变点的260!K分别与实验值相吻合,取向概率对实验值更精确的拟合及其对温度的二阶导数预言玻璃态相变点在84!K.导出了弛豫规律,其结果表明:双能级的C60分子从非平衡态到平衡态的弛豫行为与非指数因子β有关,其总的弛豫时间决定于其中一个较短的弛豫时间,展宽指数形式保持不变.讨论了KWW方程的非指数因子β与分子间协同作用的关系,发现与双取向态间的能级差有关,计算值与实验结果相同.     

C60分子在有序-无序和玻璃态相变间的取向概率与弛豫行为

用极限动力学模型研究了Ｃ₆₀分子在有序-无序相变和玻璃态相变温度区间取向 角为98°和38°的取向概率与温度的关系.计算结果在玻璃态相变点附近的85K,90K和有序- 无序相变点的260K分别与实验值相吻合,取向概率对实验值更精确的拟合及其对温度的二阶 导数预言玻璃态相变点在84K.导出了弛豫规律,其结果表明：双能级的Ｃ₆₀分子从非平衡态到平衡态的弛豫行为与非指数因子β有关,其总的弛豫时间决定于其中一个较 短的弛豫时间,展宽指数形式保持不变.讨论了KWW方程的非 关键词： 60')" href="#">Ｃ₆₀ 取向概率 非平衡态弛豫     

Erdös Rényi随机网络上爆炸渗流模型相变性质的数值模拟研究

基于改进的Newman和Ziff算法以及有限尺寸标度理论, 通过对表征渗流相变特征物理量的序参量、平均集团尺寸、二阶矩、标准偏差及尺寸不均匀性的数值模拟, 分析研究了Erdös Rényi随机网络上Achlioptas爆炸渗流模型的相变性质.研究表明: 尽管序参量表现出了不连续相变的特征, 但序参量以及其他特征物理量仍具有连续相变的幂律标度行为.因此严格地说, Erdös Rényi随机网络中的爆炸渗流相变是一种奇异相变, 它既不是标准的不连续相变, 又与常规随机渗流表现出的连续相变处于不同的普适类. 关键词： Erdös Rényi随机网络 爆炸渗流模型 相变 幂律标度行为     

Erd¨os R′enyi随机网络上爆炸渗流模型相变性质的数值模拟研究

基于改进的Newman和Ziff算法以及有限尺寸标度理论,通过对表征渗流相变特征物理量的序参量、平均集团尺寸、二阶矩、标准偏差及尺寸不均匀性的数值模拟,分析研究了Erd¨os R′enyi随机网络上Achlioptas爆炸渗流模型的相变性质.研究表明:尽管序参量表现出了不连续相变的特征,但序参量以及其他特征物理量仍具有连续相变的幂律标度行为.因此严格地说, Erd¨os R′enyi随机网络中的爆炸渗流相变是一种奇异相变,它既不是标准的不连续相变,又与常规随机渗流表现出的连续相变处于不同的普适类.     

多次冲击加载-卸载路径下铁α-ε相变动力学特性研究

采用气炮作为加载手段,结合反向碰撞技术和多台阶三层组合飞片技术,通过精细的样品/窗口波剖面测量,对典型加载-卸载-再加载路径下铁的相变动力学特性进行了研究.观测到一次卸载阶段的多波结构及再加载段的双波结构.获得首次逆相变阈值约为(11.3±0.5) GPa,首次加卸载相变特征时间为30 ns;再加载相变起始压力为10—12 GPa,且随着再加载初始态ε相质量分数降低而降低.实验显示二次相变压力阈值与ε相残余质量分数以及逆相变子相所含孪晶、缺陷相关,同时二次加载相转变速率比首次加载更快.上述结果揭示了多晶铁相变动力学行为与加载路径的强耦合,为相关研究提供了新的视角和实验支撑.     

高压下ZnO的结构、弹性性质和吸收光谱的第一性原理研究

 运用基于密度泛函理论（DFT）的平面波赝势方法（PWP）,结合局域密度近似（LDA）以及广义梯度近似（GGA）,系统地研究了ZnO的纤锌矿结构（B4结构）,NaCl结构（B1结构）和CsCl结构（B2结构）在不同压强下的几何结构、弹性性质和吸收光谱。详细研究了ZnO发生的两次相变（B4→B1及B1→B2相变）,得到了不同近似下的相变压强,以及两次相变过程中其弹性常数随压强的变化,并分析了这种变化与相变的关系。发现在高压作用下,ZnO的吸收光谱发生蓝移。通过计算结果和实验结果的比较可以看出,LDA近似下的计算结果更加符合实验结果。     

Duffing振子微弱信号检测方法研究

在前期实验工作的基础上,从理论分析的角度,提出了利用Duffing振子从大周期态向混沌态的相变 作为判据的微弱周期信号检测方法,给出了检测原理,并论证了其可行性;从过渡带影响和检测概率两方面 将该方法与传统的检测方法进行了比较分析,并对两者的检测性能进行了仿真对比.分析和仿真结果都显示,相同条件下, Duffing振子从大周期态向混沌态的相变受过渡带影响更小,所提方法具有更好的检测性能. 实验数据还表明, Duffing振子检测微弱信号只能基于单向相变, 利用阵发混沌进行频差检测只适用于待测信号信噪比较高的情况. 关键词： Duffing 混沌 检测 过渡带     

给定压力下纯铁材料的冲击相变与层裂特性研究

采用VISAR测量样品自由面速度剖面和回收样品观测分析联合技术,开展等厚对称碰撞实验,结合文献中的实验结果,研究了冲击加载压力大于纯铁材料冲击相变阈值约2~5 GPa和大于冲击相变阈值约10 GPa两种压力状态下纯铁材料的加卸载历程及各相区的变化,并从应力波相互作用的角度,指出了冲击加载压力略大于纯铁材料相变阈值约2 GPa时,等厚对称碰撞样品"反常"二次层裂与冲击相变及逆相变的关联机制。     

晶体C60取向相变的Monte Carlo研究

对晶体Ｃ６０的取向相变，热滞及压力诱导相变现象进行了Ｍｏｎｔｅ Ｃａｒｌｏ模拟，数值结果与实验基本一致。     

铈低压冲击相变数值模拟研究

对金属铈低压冲击γ→α相变进行了数值模拟研究.冲击加载实验的速度剖面结果表明,铈的低压相变过程中两相之间的转换较为光滑,无明显间断,其相变过程存在动态因素.通过分析金属铈低压冲击加载和卸载下的典型物理过程,对材料本构关系、Hugoniot关系和相变与逆相变过程进行了理论研究.获取了铈低压相变前后的本构关系及状态方程,并建立了非平衡相变理论模型.数值计算结果与平面冲击实验符合较好,表明该相变动态模型能够较好地描述铈的低压冲击加载和卸载过程.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.