Effect of the percentage of yttrium oxide on the phase composition of annealed samples of YzBa5Cu7Oy and YzBa3Cu5Oy composition

The phase composition of Y _z Ba₅Cu₇O _y (1) and Y _z Ba₃Cu₅O _y (2) samples with a variable percentage of yttrium up to the stoichiometric composition of the Y _n Ba _m Cu _{m + n} O _y series is investigated by X-ray phase and elemental analyses, electron diffraction, and high resolution imaging in a transmission electron microscope at a temperature of 930°C in the crystallization field of a matrix oxide (Ba: Cu) of 5: 6 composition on the phase diagram of the BaO-CuO _x system at P(O₂) = 21 kPa. The substantial effect of yttrium oxide’s presence on the phase composition of both objects is found, providing evidence of a complex ionic equilibrium within the melt. The fine-domain oxide structure of the YBa₂Cu₃O₆ tetragonal form, which is due to the coexistence of oxides of an Y _n Ba _m Cu _m+n O _y homologous series of (Y: Ba: Cu) 235, 123, and 257 composition is revealed. The domain size for these phases is 20–50 ?. The domains are joined coherently along axis c.     

On the existence of a homologous series of BamCum+nOy oxides with the cubic structure of the BaCuO2 oxide

Phase relations have been studied in the BaO–CuO_x system in the range of 42.0–83.0 mol.% CuO at P(O₂) = 21 kPa (air) by visual polythermal analysis (VPA), powder X-ray diffraction (XRD), differential thermal analysis (DTA), thermogravimetric analysis (TGA), chemical analysis (CA), and electron diffraction (ED) with simultaneous elemental analysis (EA) in a transmission electron microscope (TEM). The existence of discrete crystallization fields of barium–copper oxides of cation compositions Ba₄Cu₅O_y, Ba₅Cu₆O_y, Ba₇Cu₈O_y, Ba₁₂Cu₁₃O_y, and Ba₂₄Cu₂₅O_y, which have the cubic structure of the BaCuO₂ oxide, is revealed in the studied region of the system. The oxides may be represented as members of a Ba_mCu_m+nO_y homologous series. The BaCuO₂ oxide does not exist in the subsolidus region and does not have its own crystallization field. The oxygen-deficient oxide BaCuO_1.78 of the cation composition (Ba:Cu) 1:1 with the BaCuO₂ cubic structure is found in melted samples of the 50.0 mol.% CuO composition quenched at 1020–1060 °С.     

Cation nonstoichiometry and its contribution to the nanostructured inhomogeneity of tetra and ortho modifications of YBa2Cu3O7 − δ oxide

The cation composition and structure of YBa₂Cu₃O_{7 ? δ} (YBCO, the 123 phase) oxide samples synthesized at 990°C in air and annealed in oxygen at 450°C are studied via elemental analysis in a transmission electron microscope and high-resolution electron microscopy. The occurrence of cation nonstoichiometry and nanostructured inhomogeneity of the 123 phase in tetragonal and orthorhombic (superconducting) structures is confirmed. The nanostructured inhomogeneity of the 123 phase is attributed to the presence of nanocrystallites (2–5 nm) of oxides with different cation compositions belonging to the Y _n Ba _m Cu _{m + n} O _y series.     

On the thermal stability of the barium-copper oxide BaCuO2 at 900–1100°C in air

Phase relations in the 45.0–65.0 mol % CuO region of the BaO-CuO _x system at P(O₂) = 21 kPa have been studied by visual polythermal analysis (VPA), X-ray phase analysis (XPA), differential thermal analysis (DTA), thermogravimetric analysis (TGA), chemical analysis (CA), X-ray microprobe analysis (XMEA), and electron diffraction (ED) and elemental analysis (EA) in a transmission electron microscope (TEM). It is found that the investigated region of the diagram consists of several crystallization fields related to barium—copper oxides of cationic (Ba: Cu) compositions of 4: 5, 5: 6, 7: 8, 12: 13, and 24: 25 with the cubic structure of BaCuO₂ oxide. They can be represented as a Ba _m Cu _{m + n} O _y homologous series, where m = 3, 4, 5, …, n = l, 2. The 24: 25 oxide has the highest melting point in the studied region of the phase diagram. The BaCuO₂ oxide does not exist in the subsolidus region under these conditions and does not have its own crystallization field.     

Analyzing anode and cathode products obtained by the electrolysis of Y-Ba-Cu-O and Y-Ba-Cu-K-O systems

Energy dispersive X-ray spectroscopy (EDX) and electron diffraction and high-resolution electron microscopy are used to study the composition and structure of anode and cathode deposits formed during the high temperature (950°C) electrolysis of the Y-Ba-Cu-O system and low temperature (450°C) electrolysis of the Y-Ba-Cu-K-O system. It is found for the first time that an oxide with the YBa₂Cu₃O _y structure (123 phase) is synthesized during the high temperature electrolysis of Y_0.02Ba_0.30Cu_0.70O _y and Y_0.02Ba_0.25Cu_0.75O _y melts. The 123 phase is not synthesized during low temperature electrolysis, where melts are formed from Y₂O₃, BaO₂, CuO, and KOH. Two new Pt-containing oxides with hexagonal structure are found in the products of high temperature electrolysis.     

Synthesis and characterization of structural and luminescence properties of blue — green BaAlxOy:Eu2+ phosphor by solution — combustion method

Europium-doped barium aluminate (BaAl _x O _y :Eu²⁺) phosphors were obtained at low temperatures (500°C) using the solution — combustion of corresponding metal nitrate-urea solution mixtures. The particle size and morphology and the structural and luminescent properties of the synthesized phosphors were examined by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Electron diffraction spectroscopy (EDS) and photoluminescence (PL). It was found that the change in Ba: Al molar ratios showed greatly influence not only on the particle size and morphology, but also on their PL spectra and crystalline structure. The structure of BaAl _x O _y nanophosphors changes from a hexagonal Ba₂Al₁₀O₁₇ phase for samples with 6:100 molar ratios to a hexagonal BaAl₂O₄ one with an increase in Ba content. The peak of the emission band occurs at a longer wavelength (around 615 nm) with a decrease in Ba concentration but displays a broad blue-green emission band composed from two emissions with the maximum at 495 and 530nm coming from Eu²⁺ in two sites for increasing Ba content. The blue-green emission is probably due to the influence of 5d electron states of Eu²⁺ in the crystal field because of atomic size variation causing crystal defects while the red emission is due to f - f transitions. These findings clearly demonstrate the possibility of fine tuning the colour emission.     

Effects on structure and superconductivity for La and Ca codoping in YBa2Cu3Oy cuprates

The nominal composition of Y_0.8Ca_0.2Ba_2−xLa_xCu₃O_y (YBLCO) cuprates with x≤0.50 has been synthesized by the standard solid state reaction technique. X-ray diffraction and the resistivity measurements are used to characterize the structure and the superconductivity of YBLCO cuprates. There is no structural phase transition in the whole doping range. The dependencies of the lattice constants and some other structural parameters on the content of La for the samples YBLCO with x≤0.20 are different than those for the samples with x≥0.25. The zero resistance temperature T_c0 increases with the increase of the content of La in YBLCO as x≤0.20, and decreases as x≥0.25. We compared these results with those of Nd-doped Y_0.8Ca_0.2Ba_2−zNd_zCu₃O_y cuprates. It seems that T_c0 is related to the structural parameters due to Ca and La codoping in YBLCO.     

Superconductivity in the LnBaCuO system (Ln = Y,Ho, Er)

Superconductivity around 90K is observed in mixed and single phase system of LnBaCuO (Ln = Y, Ho, Er). Resistivity, X-ray powder diffraction and AC susceptibility measurements were carried out on samples of the mixed phase systems Ln_2−xBa_xCuO_4−y (Ln = Ho, Er), Y_1.2Ba_0.8Cu_1+xO_4+x−y(0<x<5) and single phase system Ba₂LnCu₃O₇ (Ln = Y, Ho, Er). Ln_2−xBa_xCuO_4−y consists of Ba₂LnCu₃O₇, BaCuLn₂O₅, Cu₂Ln₂O₅ and starting materials and shows a small diamagnetic signal below T_c in the temperature dependent AC susceptibility. Y_1.2Ba_0.8Cu_1+xO_4+x−y is a mixture of Ba₂YCu₃O₇, BaCuY₂O₅ and CuO and also indicates a small diamagnetic signal at 92K. Interesting resistivity anomalies occur in the Y_1.2Ba_0.8Cu₄O_7−y and Ho_0.8Ba_1.2CuO_4−y composites including large drops in the resistivity at ∼220 and ∼120K, respectively. The pure compounds, Ba₂LnCu₃O₇ (Ln = Y, Ho, Er) show sharp resistive superconducting transitions and bulk Meissner effects of 90%.     

Y1-xPrxBa2Cu3O7+δ的红外反射谱

测量了温度范围为4.2—300K的Y_1-xPr_xBa₂Cu₃O_7+δ(x=0,0.1,0.2,0.4,0.5,0.61.0)的红外反射谱,发现在低温下Ba模有双模行为,随着x值增大双模强度反转,在YBa₂Cu₃O_7+δ中已被判定为Y模的位于194cm^-1的反射峰的位置与Pr的含量无关,即用Pr部份或全部替代Y时此峰不发生频移。建议Pr在Y_1-xPr_xBa₂Cu₃O_7+δ,中是正4价,Pr的替代使原来可移动的空穴被定域在Pr的周围,使超导电性受到压制。 关键词：     

Y1-xCaxBa2Cu3-xMxO7-δ (M=Fe,Ni)体系的超导电性

本文报道,通过对Y_1-xCa_xBa₂Cu_3-xMxO_7-δ(M=Fe,Ni)体系样品的晶体结构、氧含量、正常态电阻率与温度的关系,以及超导转变温度等测量,并与YBa₂Cu_3-xMxO_7-δ(M=Fe,Ni)体系进行比较,发现Y_1-xCa_xBa₂Cu_3-xFe_xO_7-δ体系的T_c显著地高于相应x值的YBa₂Cu_3-xFe_xO_7-δ体系,而Y_1-xCa_xBa₂Cu_3-xNi_xO_7-δ体系则相反,T_c低于仅Ni替代的体系,表明Ca和Fe同时替代时两者引起的载流子浓度(n_H)变化相互补偿,抑制了仅Fe替代时引起的n_H和T_c急剧下降;而作Ca和Ni同时替代时主要的不是两者引起载流子浓度变化的相互补偿,Ca和Ni替代效应之间的关联较弱。作者认为,对Y_1-xCa_xBa₂Cu_3-xFe_xO_7-δ体系属于CuO₂平面外的元素替代,这时载流子浓度是决定Tc的主要因素;而对Y_1-xCa_xBa₂Cu_3-xNi_xO_7-δ体系,由于Ni²⁺离子主要占据Cu(Ⅱ)位,它导致磁拆对效应,Ni²⁺离子的拆对效应是引起T_c下降的直接原因。 关键词：     

Electric field gradients in PrBa2 Cu 3 O 7 : LSDA+U results and comparison with experiment

Electric-field gradient (EFG) and asymmetry parameter (η) at all oxygen and copper sites of nonsuperconducting PrBa₂Cu₃O₇ (Pr123) compound were calculated using the full-potential (linearized)-augmented-plane-wave plus local orbitals method. Exchange and correlation effects were treated by LSDA+U for Cu(3d) and Pr(4f) electrons. The effects of changing screened Coulomb parameters U_Pr, U_Cu1, and U_Cu2 on the results were individually studied. The calculated EFG of O2 site is close to the EFG of O3 site at variance with the experimental result. It was shown that by increasing superconducting holes in O2 and O3 sites the EFG at these sites increase and vice versa. The most famous theories which have been proposed to explain the suppression of superconductivity in perfect (without any mis-substitution or other defects) Pr123 compound are not consistent with the experimental EFG at O2 and O3 sites. By replacing one Pr atom at the Ba site on unit cell of Pr123 (Pr_Ba), it was shown that Pr_Ba mis-substitution reduces the superconducting holes in both O2 and O3 sites and could be responsible for the suppuration of superconductivity in Pr123 samples. It is very probable that the unusual behaviors of experimental EFG at O2 and O3 sites of Pr123 are related to oxygen defects which are produced with Pr_Ba mis-substitution.     

双掺杂BaxAgyCa3-x-yCo4O9氧化物的织构与电输运性能

采用柠檬酸溶胶凝胶和放电等离子烧结制备了Ca位双掺杂型的Ba_xAg_yCa_3-x-yCo₄O₉烧结体,利用X射线衍射仪、扫描电子显微镜、电阻率测试仪等研究了烧结体相组成、取向度、织构及电性能.结果表明：含Ag的掺杂试样中出现了偏离化学计量比分布的Ag单质,掺杂试样取向度随Ba与Ag掺杂量之比x/y的增大而提高,含Ag的掺杂试样取向度低于未掺杂试样,不含Ag的掺杂试样取向度高于未掺杂试样.x=y=01的试样导电机理发生变化.Ba,Ag掺杂量相等的试样保持较低取向度的同时具有较低的电阻率,在973 K时达到最低值（73 mΩcm）,而取向度最低的Ag单掺杂试样电阻率在所有试样中最低,在973 K时为63 mΩcm. 关键词： 3Co₄O₉')" href="#">Ca₃Co₄O₉ 双掺杂 织构 电输运性能     

Y1Ba2Cu3O7的维度特性分析

本文中利用变换生成函数的技术计算了在Y₁Ba₂Cu₃O₇晶格上无规行走的逃逸几率,得到了弱耦合极限下的渐近表达式,推算了Y₁Ba₂Cu₃O₇的维度与Cu-O层间的耦合参量的关系,并得到从低维到三维的渡越(crossover)。理论计算表明,Y₁Ba₂Cu₃O₇是一个十分接近三维的体系。 关键词：     

Transport properties of a and c axis oriented (Y1?xCax)Ba2Cu3Oy thin films

Anisotropy and Hall effect measurements have been performed in calcium-doped, i.e., overdoped YBa₂Cu₃O_y ((Y_1−xCa_x)Ba₂Cu₃O_y) thin films witha andc axis orientations. In highly overdoped films (x=0.4), the anisotropy of the normal resistivity decreases and a drastic change in Hall conductivity in the mixed state is observed. The change in Hall conductivity in the overdoped region is consistent with recent experimental results for La_2−xSr_xCuO₄ films and seems to be common in highT _c superconductors.     

不同粒径纳米Y2Ba4CuBiOy 相掺杂对TSIG法单畴YBCO超导块材性能的影响

本文采用顶部籽晶熔渗方法(TSIG), 研究了不同粒径纳米Y₂Ba₄CuBiO_y粒子对单畴YBCO超导块材的生长形貌、微观结构及其磁悬浮力的影响.实验所用纳米Y₂Ba₄CuBiO_y粉体的平均粒度分别为283.0 nm, 170.4 nm以及82.5 nm, 每种粉体在YBCO超导块材中的含量均为2 wt%. 研究结果表明: 在掺杂量为2 wt%的情况下, Y₂Ba₄CuBiO_y粉体的粒度并不影响样品的宏观形貌, 均可制备出单畴YBCO块材; 并且成功地将纳米Y₂Ba₄CuBiO_y粒子引入单畴YBCO块材中, 且使其均匀分布, 但样品中的Y₂Ba₄CuBiO_y粒子均小于其初始粉体的粒度, 分别减小到270 nm, 150 nm和50 nm; 随着Y₂Ba₄CuBiO_y粉体初始粒度的减小, 样品的磁悬浮力逐渐增大, 分别为10 N, 17 N, 22 N. 该结果为进一步研究纳米磁通钉扎中心的引入方法及提高YBCO超导块材的性能有重大意义.     

Structures and luminescence properties of Yb3＋ in the double perovskites Ba2YB＇O6 （B＇=Ta5＋, Nb5＋） phosphors

The Yb³⁺ doped Ba₂YB'O₆ (B'=Ta⁵⁺, Nb⁵⁺) were prepared by high temperature solid-state reaction method, their structures were determined by x-ray diffraction and refined by Rietveld method. The diffuse reflection absorption, excitation and emission spectra of Yb³⁺:Ba₂YB'O₆ (B'=,Ta⁵⁺, Nb⁵⁺) were measured at room temperature. Under the excitation of ultraviolet light, these phosphors exhibit broad charge transfer band emissions of TaO₆ or NbO₆ centre with large Stokes shift. The Yb³⁺ doped into these hosts are situated at Y³⁺ sites of cubic symmetry (O_h). The experimental energy levels of Yb³⁺ in Ba₂YTaO₆ and Ba₂YNbO₆ were determined by photoluminescence and diffuse reflection absorption spectra. Their wavefunctions and theoretical energy levels were obtained by diagonalising the Hamiltonian matrix. The experimental energy levels were fitted by Levenberg--Marquardt iteration algorithm to determine crystal field parameters. Then, the magnetic-pole transition line strengths of Yb³⁺:Ba₂YB'O₆(B'=Ta⁵⁺, Nb⁵⁺) from (²F_5/2)Γ₈^- to the low-energy states were calculated.     

Fabrication of NdBa2Cu3O7−δ single crystals by the top-seeded solution-growth method in 1%, 21%, and 100% oxygen partial pressure atmosphere

Single crystals of NdBa₂Cu₃O_7−δ (Nd123) have been successfully grown by the top-seeded solution-growth (TSSG) method in 1%, 21% and 100% oxygen partial pressure atmosphere ((P(O₂) = 0.01 atm, P(O)₂) = 0.21 atm and P(O₂) = 1.00 atm). Ba---Cu---O solvent with a Ba to Cu ratio of 3:5 was used in a Nd₂O₃ crucible. Nd is supplied by the reaction between the molten solvent and the Nd₂O₃ crucible. Compositions of Nd123 single crystals grown in different oxygen partial pressure atmospheres were analyzed by inductivity coupled plasma atomic emission spectrometry (ICP-AES) and confirmed to be Nd:Ba:Cu = 1.01:1.97:3.00 for P(O₂) = 0.01 atm, Nd:Ba:Cu = 1.07:1.95:3.00 for P(O₂) = 0.21 atm and Nd:Ba:Cu = 1.10:1.90:3.00 for P(O₂) = 1.00 atm, respectively. The Nd123 single crystals grown in different oxygen partial pressure atmospheres were annealed in a pure oxygen gas flow, and the temperature dependence of the DC magnetization for these crystals was measured using a superconducting quantum interference device (SQUID) magnetometer. The Nd123 single crystal grown in P(O₂) = 0.01 atm, and annealed at 340°C for 200 h showed a steep superconductive transition at 96 K. On the other hand, the Nd123 crystal grown in P(O₂) = 0.21, 1.00 atm and, annealed at 340°C for 200 h exhibited a broad transition at 92 K for P(O₂) = 0.21 atm and at 88 K for P(O₂) = 1.00 atm, respectively. Therefore for Nd123 single crystal production with high quality superconductive characteristics, a low oxygen partial pressure atmosphere during crystal growth is found to be effective for minimizing the substitution of Nd ions into Ba sites.     

A low temperature internal friction study of Y0.85Ca0.15Ba2Cu3O7−δ with different oxygen content

The ceramic sample of Y_0.85Ca_0.15Ba₂Cu₃O_7−δ was prepared by standard solid-state reaction method, and samples with different oxygen concentration were obtained by quenching from high temperature. The internal friction was measured using the vibrating reed method from liquid-nitrogen temperature to room temperature at kilohertz frequency. An internal friction peak was observed around 250 K in Y_0.85Ca_0.15Ba₂Cu₃O_7−δ quenched from 1023 K. The peak is related to the one observed around 220 K (labeled as P3 peak) in undoped YBa₂Cu₃O_7−δ (Y123). This result shows the dependence of P3 peak on carriers density and P3 peak has a strong correlation to the abnormal behavior of Y123 in the underdoped range. The variation of two low temperature thermal activated relaxation peaks (P1 and P2) on oxygen content were also investigated. And consistent explanations were given based on all recent researches.     

Obtaining YBa2Cu3O y crystals via YO1.5-BaO-CuO x melt electrolysis

Mass transfer during the melt electrolysis of Y_0.02Ba_0.30Cu_0.70O _y and Y_0.02Ba_0.25Cu_0.75O _y samples is investigated at a temperature of 950°C (0.5 h) and a current of 5–10⁵⁰ A in a cell. Crystal deposits of YBa₂CVu₃O_{6 + δ} tetragonal oxide (123) are grown, and their cation composition and structure are investigated by means of X-ray phase analysis, electron diffraction, elemental analysis, and high resolution on a transmission electron microscope. Deviation of the cation composition of oxide (123) from the stoichiometric ratio and its nanostructured state at nanocrystallite sizes of 2–5 nm are observed. The temperature dependence of magnetic susceptibility after oxygen annealing (450°C, 1 h) has four curve bends, indicating there are four superconducting phases with T _s = 45, 52, 75, and 86 K.     

Growth and properties of air-processed GdBa2Cu3O7−δ superconductors with fined Gd2BaCuO5 and Gd2Ba4CuFeOy additions

We have succeeded in synthesizing a powder form of Gd₂Ba₄CuFeO_y (Gd2411) in air. GdBa₂Cu₃O_7−δ (Gd123)/Gd₂BaCuO₅ (Gd211) precursor powders added with different amounts of Gd₂Ba₄CuFeO_y (x = 0, 0.002, 0.004, 0.02) in molar ratio to Gd123 have been fabricated successfully into the form of large, single grains by the top seeded melt growth (TSMG) process. The relation between the additions amounts of Gd2411/Gd211 and critical current density (J_C) was analyzed. We found Gd2411 particles stably exist in the Gd123 matrix without degradation of superconducting properties owing to the existence of the Fe magnetic ion. The trapped field was observed to increase significantly compared with the bulk without Gd2411 additions.