Chemiluminescence from alkoxy-substituted acridinium dimethylphenyl ester labels

Chemiluminescent acridinium dimethylphenyl ester labels are used in automated immunoassays for clinical diagnostics. Light emission from these labels is triggered by alkaline peroxide in the presence of the cationic surfactant cetyltrimethylammonium chloride (CTAC). The surfactant plays a critical role in the chemiluminescence process of these labels by both accelerating their emission kinetics and increasing total light output enabling high throughout and improved assay sensitivity in automated immunoassays. Despite the surfactant's crucial role in the chemiluminescent reaction, no study has investigated how structural perturbations in the acridinium ring could impact the influence of the surfactant. We describe herein the synthesis and properties of three new alkoxy-substituted, acridinium dimethylphenyl esters where the nature of the alkoxy group in the acridinium ring was varied (hydrophobic or hydrophilic). Chemiluminescence measurements of these alkoxy-substituted labels indicate that hydrophilic functional groups in the acridinium ring, in particular sulfobetaine zwitterions, disrupt surfactant-mediated compression of emission times but not enhancement of light yield. These results support the hypothesis that surfactant-mediated effects require the binding of two different reaction intermediates to surfactant aggregates and, that surfactants influence light emission from acridinium esters by two separate mechanisms. Our studies also indicate that preservation of both surfactant effects on acridinium ester chemiluminescence and low non-specific binding of the label can be achieved with a relatively hydrophobic acridinium ring coupled to a hydrophilic phenolic ester leaving group.     

A green synthesis of chemiluminescent N-sulfopropyl acridinium esters in ionic liquids without using the carcinogen 1,3-propane sultone

Chemiluminescent acridinium dimethylphenyl esters containing hydrophilic N-sulfopropyl groups in the acridinium ring are used as labels in automated immunoassays for clinical diagnostics. Introduction of the N-sulfopropyl group in these labels is normally accomplished by N-alkylation of the corresponding, nonchemiluminescent acridine ester precursors with the toxic carcinogen 1,3-propane sultone. In the current study, we report that sodium 3-bromopropane sulfonate in ionic liquids (ILs) is a benign alternative to 1,3-propane sultone for introducing the N-sulfopropyl group in chemiluminescent acridinium ester labels. The sultone reagent can be eliminated in the synthesis of N-sulfopropyl acridinium dimethylphenyl ester labels by taking advantage of the increased reactivity of acridan esters toward nontoxic sodium 3-bromopropane sulfonate in [BMIM][BF₄]. Sodium 3-bromopropane sulfonate in ILs is also potentially a nontoxic alternative to 1,3-propane sultone for introducing the water-soluble, three-carbon sulfobetaine moiety in other molecules as well.     

Zwitterionic reagents for labeling, cross-linking and improving the performance of chemiluminescent immunoassays

Improving reagent performance in immunoassays both to enhance assay sensitivity and to minimize interference are ongoing challenges in clinical diagnostics. We describe herein the syntheses of a new class of hydrophilic reagents containing sulfobetaine zwitterions and their applications. These zwitterionic reagents are potentially useful for improving the properties of immunoassay reagents. We demonstrate for the first time that zwitterion labeling is a general and viable strategy for reducing the non-specific binding of proteins to microparticles and, to improve the aqueous solubility of hydrophobic peptides. We also describe the synthesis of zwitterionic cross-linking reagents and demonstrate their utility for peptide conjugation. In automated, chemiluminescent immunoassays, improved assay performance was observed for a hydrophobic, small analyte (theophylline) using an acridinium ester conjugate with a zwitterionic sulfobetaine linker compared to a hexa(ethylene)glycol linker. Sandwich assay performance for a large analyte (thyroid stimulating hormone) was similar for the two acridinium ester labels. These results indicate that zwitterions are complementary to poly(ethylene)glycol in improving the aqueous solubility and reducing the non-specific binding of chemiluminescent acridinium ester conjugates.     

Determination of zwitterionic and cationic surfactants by high-performance liquid chromatography with chemiluminescenscent nitrogen detection

The use of chemiluminescent nitrogen specific detection (CLND) combined with an HPLC separation allows for the identification and quantification of cationic and zwitterionic surfactants. The CLND provides equimolar responses, based on the amount of nitrogen within any compound. This allows for the detection of any nitrogen containing surfactant. Reversed-phase separation methods using cyano columns are developed for cationic and zwitterionic (sulfobetaine) surfactant mixtures. The limits of detection for these surfactants are in the single micromolar range (1 ng N). A linear response was obtained (R2=0.9981) between 50 microM and 5 mM. The methodology was then applied to the determination of an industrial zwitterionic surfactant, Rewoteric AM CAS U [coco(amidopropyl)hydroxyldimethylsulfobetaine].     

Chemiluminescent reductive acridinium triggering (CRAT)--mechanism and applications

Acridinium esters traditionally are triggered using basic hydrogen peroxide. By serendipity, we have found that acridinium esters can also be triggered with emission of chemiluminescence by reductive triggering, e.g., by zinc metal or reduced forms of ferric and cupric salts. Furthermore, organic reducing compounds like dithiothreitol, tricarboxyethylphosphine or glutathione could be used in combination with organic oxidants like quinones or inorganic ferric or cupric salts. Mechanisms are proposed which involve the intermediacy of superoxide. Two forms of reactive oxygen species (i.e., hydrogen peroxide and superoxide) could be discriminated based on differences in kinetics. Some applications (improved detection of acridinium ester, use of acridinium ester as redox probes) are discussed.     

VITAMIN E DISSOLUTION IN SULFOBETAINE ZW1TTERIONIC SURFACTANT SOLUTION AND ENHANCEMENT OF DIS SOLUTION BY ADDING SODIUM CHLORIDE

Vitamin E is widely used in pharmaceutical, food and cosmetic preparations.This paper discusses methods of preparing vitamin E emulsions by using sulfobetaine (SB) zwitterionic surfactants which have high electrolyte tolerance. The amount of vitamin E dissolved in water was analyzed by turbidity and UV absorption measurements. The emulsion droplet size was determined by laser light scattering. Microemulsions with small particle size and high resistance to oxidation in air can be obtained by solubilizing vitamin E in SB solutions at high concentrations (above %) The performance of a series of SB surfactants is compared in 1.5% solutions. A SB surfactant with a 12 carbon chain seems to be the most effective in dissolving vitamin E. The saturation value of vitamin E is increased about one order of magnitude by adding NaCl to the SB surfactant solutions. Emulsions formed in surfactant solutions containing NaCl (0 4-0.6 M) are stable at low surfactant concentrations such as 0.2-0.4 % The emulsion droplet sizes are below or around 200nm.     

Photophysical and viscometric properties of naphthalene-labeled acrylamide/N,N-dimethyl maleimido propyl ammonium propane sulfonate copolymer

 The synthesis, viscometric, and fluorescence properties of a water-soluble zwitterionic sulfobetaine copolymer, poly(ADMMAPS)/NA, are reported. When fluorescent hydrophobes (naphthyl group) are incorporated into the zwitterionic copolymer, the photophysical response may effectively probe solution behavior on the microscopic level. Experimental results indicate that I _E/I _M steadily increases with increases in polymer concentration. I _E/I _M in aqueous solution is greater than that in aqueous potassium chloride solution. Dynamic light scattering (QELS) measurements show that hydrodynamic diameters of the naphthalene-labeled zwitterionic sulfobetaine copolymer increase with an increasing salt concentration. Viscosity studies reveal that the polymer coil expanded as more salt is added. In fluorescence quenching study, the reduction in the quenching efficiency of Tl⁺ with salt addition can arise from enhanced compartmentalization of naphthalene labels as added electrolyte enhances intrapolymer micellization. The intrapolymer micelle is easily formed, indicating that the thallium ion has difficulty reacting with bound naphthalenes located in the polymer coil. The naphthalene-labeled zwitterionic sulfobetaine copolymer is depicted as a compacted polymer coil conformation in deionized water because of intra-and inter-associations. Consequently, salt addition breaks up the associations and enhances the intrapolymer micellization. The microscopic and macroscopic behaviors of zwitterionic sulfobetaine copolymer differ a lot from those of the corresponding cationic copolymer. Received: 4 February 1997 Accepted: 1 May 1997     

Forces between glass surfaces in mixed cationic-zwitterionic surfactant systems

We report atomic force microscopy (AFM) measurements of the forces between borosilicate glass solids in aqueous mixtures of cationic and zwitterionic surfactants. These forces are used to determine the adsorption of the surfactant as a function of the separation between the interfaces (proximal adsorption) through the application of a Maxwell relation. In the absence of cationic surfactant, the zwitterionic surfactant N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS) undergoes little adsorption to glass at concentrations up to about 2/3 critical micelle concentration (cmc). In addition, DDAPS does not have much effect on the forces over the same concentration range. In contrast, the cationic surfactant dodecylpyridinium chloride (DPC) does adsorb to glass and does affect the force between glass surfaces at concentrations much lower than the cmc. In the presence of a small amount of DPC (0.05 mM = cmc/300), the net force between the glass surfaces is quite sensitive to the solution concentration of DDAPS. A model-independent thermodynamic argument is used to show that the surface excess of DDAPS depends on the separation between the glass interfaces when the cationic surfactant is present and that the surface excess of the cationic surfactant is more sensitive to interfacial separation in the presence of the zwitterionic surfactant. The change in adsorption of the zwitterionic surfactant is explained in terms of an intermolecular coupling between the long-range electrostatic force acting on the cationic surfactant and the short-range hydrophobic interaction between the alkyl chains on the cationic and zwitterionic surfactants. The adsorptions of cationic and zwitterionic surfactants in mixtures were measured independently and simultaneously by attenuated total internal reflection infrared spectroscopy (ATR-IR). The adsorption of the zwitterionic surfactant is enhanced by the presence of a small amount of cationic surfactant.     

Surfactant effect on the lower critical solution temperature of poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups

 The surfactant effect on the lower critical solution temperature (LCST) of thermosensitive poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups was examined in terms of molecular interactions between the polyphosphazenes and surfactants including various anionic, cationic, and nonionic surfactants in aqueous solution. Most of the anionic and cationic surfactants increased the LCST of the polymers: the LCST increased more sharply with increasing length and hydrophobicity of the hydrophobic part of the surfactant molecule. The ΔLCSTs (T _0.03M− T _0M), the change in the LCST by addition of 0 and 0.03 M sodium dodecyl sulfate (SDS), were found to be 7.0 and 14.5 °C for the polymers bearing ethyl esters of glycine and aspartic acid, respectively. The LCST increase of poly(organophosphazene) having a more hydrophobic aspartic acid ethyl ester was 2 times larger compared with that of the polymer having glycine ethyl ester as a side group. The binding behavior of SDS to the polymer bearing glycine ethyl ester as a hydrophobic group was explained from the results of titration of the polymer solutions containing SDS with tetrapropylammonium bromide. Graphic models for the molecular interactions of polymer/surfactant and polymer/surfactant/salt in aqueous solutions were proposed. Received: 17 February 2000/Accepted: 25 April 2000     

Development of a Novel Chemiluminescent Probe with a Higher Efficiency than LucigeniiT

A many efforts have been made to take advantage of the chemiluminesce of lucigenin and acridine derivatives, especially for analytical purposes. Aryl acridinium esters have been used as labels for the immunoassay of both large and small molecules. Lucigenin is more stable and higher quantum yield than acridinium ester,but it has not been used as labels in immunoassay and DNA probes,because it dose not have a label moiety group, so for.     

Kinetics of alkaline fading of methyl violet in micellar solutions of surfactants: Comparing Piszkiewicz's,Berezin's,and pseudophase ion-exchange models

The micellar effect of surfactants of various types on the rate of the reaction between methyl violet and hydroxide ion is studied. The absorption spectra show that the cation of methyl violet is bound by micelles of all types at proper concentrations of surfactants. The observed rate constant in micellar systems containing nonionic Brij-35, zwitterionic 3-(dimethyldodecylammonio)-propanesulfonate, cationic cetyltrimethylammonium bromide and hydroxide surfactants is higher, whereas in solutions of the anionic surfactant sodium dodecylsulfate is lower than that one in the surfactant-free system. Piszkiewicz's, Berezin's, and pseudophase ion-exchange models of the kinetic micellar effect are used for the treatment of the dependences of the above-mentioned constants on the surfactant concentration. The values of the corresponding kinetic parameters are compared and discussed. The influence of nonionic, zwitterionic, and anionic micelles on the reaction rate is discussed on the basis of medium and concentration kinetic effects. The character of the cationic micelles effect is somewhat paradoxical. Although the observed pseudo–first-order reaction rate constant substantially increases in the presence of such micelles, the second order-rate constant in these micelles is lower than the corresponding value in surfactant-free aqueous solution. As a possible explanation, the decrease in the reactivity of the HO^– ions is proposed, owing to their electrostatic association with the cationic headgroups (“diverting effect”).     

Interaction of surfactants and aminoindophenol dye

The interaction of dye and surfactants was studied by their spectroscopic and surface properties. Large bathochromic shift (15 nm) in the absorption spectrum was found for aminoindophenol dye at high pH in cationic surfactant, while there is no significant shift in anionic, zwitterionic and nonionic surfactant solutions. The static and dynamic surface properties show there is strong interaction in mixture of cationic surfactant and aminoindophenol dye. Interaction of dye and surfactants on surface and in solution is correlated to the intensity of dye deposition on fiber. The charge complex formation between cationic surfactant and aminoindophenolic dye delays the dye diffusion into keratin fiber. The stronger is the dye/surfactant interaction, the lower dye deposition and diffusion become.     

Chemiluminescent Detection of Carbohydrates in the Tumoral Breast Diseases

Nowadays, there is an increase of investigations into the fibroadenoma, mainly because some studies have shown that the occurrence of fibroadenoma is linked to an increased risk of developing breast carcinoma. Currently, the chemiluminescence biomarkers are applied for validation methods and screening. Here, a lectin chemiluminescence is proposed as new histochemistry method to identify carbohydrates in mammary tumoral tissues. The lectins concanavalin A (Con A) and peanut agglutinin (PNA) conjugated to acridinium ester were used to characterize the glycocode of breast tissues: normal, fibroadenoma, and invasive duct carcinoma (IDC). The lectin chemiluminescence expressed in relative light units (RLU) was higher in fibroadenoma and IDC than in normal tissue for both lectins tested. The relationship RLU emission versus tissue area described a linear and hyperbolic curve for IDC and fibroadenoma, respectively, using Con A whereas hyperbolic curves for both transformed tissues using PNA. RLU was abolished by inhibiting the interaction between tissues and lectins using their specific carbohydrates: methyl-α-d-mannoside (Con A) and galactose (PNA). The intrinsic fluorescence emission did not change with combination of the lectins (Con A/PNA) to the acridinium ester for hydrophobic residues. These results represent the lectin chemiluminescence as an alternative of histochemistry method for tumoral diagnosis in the breast.     

Clinical applications of chemiluminescence

This article reviews the clinical applications of chemiluminescence in routine testing and surveys the diverse applications of chemiluminescence in clinical research. In routine clinical testing, chemiluminescent labels (acridinium ester, acridinium sulfonamide) and detection reactions for peroxidase and alkaline phosphatase enzyme labels (luminol and adamantyl 1,2-dioxetane-based reactions, respectively) are widely used in immunoassay and nucleic acid probe assays (e.g. hybridization protection assay, Hybrid Capture^® assay). In clinical research the sensitivity, dynamic range and diversity of chemiluminescent assays has led to a vast range of applications, notably in protein and nucleic acid blotting, microarray-based assays, monitoring reactive oxygen species, and as detection reactions for substances separated by HPLC, capillary electrophoresis (CE), and flow-injection analysis.     

Alpha-Lactalbumin is unfolded by all classes of surfactants but by different mechanisms

We show that all four classes of surfactants (anionic, cationic, non-ionic, and zwitterionic) denature alpha-lactalbumin (alphaLA), making alphaLA an excellent model system to compare their denaturation mechanisms. This involves at least two steps in all surfactants but is more complex in charged surfactants due to their strong binding properties. At very low concentrations, charged surfactants bind specifically as monomers, but the first denaturation process only sets in when 4-10 surfactant molecules are bound to form clusters on the protein surface and is followed by a second loss of structure as 20-25 surfactant molecules are bound. Sub-micellar interactions can be modeled as simple independent binding at multiple sites which does not achieve saturation before micelle formation sets in. In contrast, no specific sub-micellar surfactant binding is detected by calorimetry in the presence of zwitterionic and non-ionic surfactants, and denaturation only occurs around the cmc. Unfolding rates are very rapid in charged surfactants and reach a similar plateau level around the cmc, indicating that monomers and micelles operate on a mutually exclusive basis. In contrast, unfolding occurs slowly in zwitterionic and non-ionic surfactants and the rate increases with the cmc, suggesting that monomers cooperate with micelles in denaturation.     

Zwitterionically modified hydroxypropylcellulose for biomedical applications

Novel polyelectrolytes have been synthesized by grafting sulfobetaine side chains onto hydroxypropylcellulose backbone. Polymers with various degrees of grafting have been obtained. The polymers do not interact with model anionic, cationic and zwitterionic surfactants as found in fluorescence studies using pyrene as a molecular probe. Dynamic light scattering (DLS) studies indicated that in the graft polymer solution two types of polymers are present. The films were formed from the grafted polymers. Using atomic force microscopy (AFM) technique it was found that they are resistant to the adhesion of proteins and can be used for the preparation of antiadhesive surfaces which may find biomedical applications.     

Alkylation of carbonyl compounds in water: formation of C-C and C-O bonds in the presence of surfactants

The formation of C-C and C-O bonds by the reaction of enolate intermediates with electrophilic substrates commonly requires strong bases, aprotic solvents and very low temperatures. A way of performing the same reactions with sodium hydroxide at moderate temperatures in aqueous surfactant solutions is presented. Different halides, ketones and surfactants (cationic, zwitterionic and anionic) have been used. The results obtained show that the amount of ketone alkylation is much higher and that the reactions are faster in the presence than in the absence of surfactant aggregates. The hydrolysis of the halide is minimised in the presence of cationic or zwitterionic surfactants.     

不同类型表面活性剂与高铁肌红蛋白相互作用

通过UV-Vis吸收光谱、同步荧光光谱、圆二色(CD)光谱等方法对阴离子型表面活性剂——琥珀酸二辛酯磺酸钠(AOT)和十二烷基苯磺酸钠(SDBS)、阳离子型表面活性剂——十六烷基三甲基溴化铵(CTAB)和十二烷基三甲基溴化铵(DTAB)、两性离子型表面活性剂——3-[(3-胆固醇氨丙基)二甲基氨基]-1-丙磺酸(CHAPS)与马心高铁肌红蛋白(metMb)的不同作用机理进行了探讨.结果显示:阴、阳离子型表面活性剂可以与蛋白发生较强烈的作用,且相互作用与表面活性剂的浓度密切相关.AOT和SDBS浓度的升高使得metMb的Soret带发生红移且出现两个新的Q带,伴随着配体金属电荷转移(LMCT)带的消失,蛋白从水合的六配位高自旋复合物(6-cHs)转化成六配位低自旋高铁血红素复合物(6-cLs),低浓度的AOT和SDBS对Tyr和Trp微环境均有影响,能使metMb的二级结构发生变化;而CTAB和DTAB在低浓度时对metMb的血红素中心影响不大,但是对Trp和Tyr的微环境影响很大,高浓度时主要通过静电吸引作用以聚合体形式直接作用于血红素中心,使Soret带发生蓝移,metMb形成五配位高自旋(5-cHs)复合物,血红素从疏水腔中释放出来,metMb的α螺旋含量减少.DTAB由于自身结构的特点,与CTAB作用于蛋白的过程有些区别,形成了一个中间态,但最终也导致血红素的暴露.两性离子型表面活性剂在测定浓度范围内不与metMb发生作用,原因是CHAPS整体呈电中性,其与metMb的阴离子性或者阳离子性位点作用的能力很弱,同时也说明metMb表面带相反电荷的位点相距较远.结果充分证明表面活性剂与蛋白相互作用的方式与表面活性剂的种类、结构及其浓度有关.     

Cleavable surfactants

The review covers the development within the field of cleavable surfactants since 2003. Cleavable surfactants are amphiphiles in which a weak linkage has been deliberately inserted, normally, but not always, between the hydrophobic tail and the polar headgroup. Alkali labile linkages that have been used for the purpose include normal ester bonds, betaine esters, and carbonates. Ketals and ortho esters are example of bonds that are susceptible to acid hydrolysis. Several investigations deal with cationic ester-containing surfactants, both monomeric and dimeric species, the latter being gemini surfactants. Ester, amide and carbonate containing surfactants have been investigated with respect to enzyme catalyzed hydrolysis. The main incentive for the development of novel cleavable surfactants is to improve the biodegradation characteristics and the rate of biodegradation has consequently been studied for several of the surfactants. One interesting observation is that there is often very little correlation between rate of chemical and enzymatic hydrolysis on the one hand and rate of biodegradation on the other hand. A completely new type of cleavable surfactant is based on a Diels–Alder reaction between a maleimide derivative and a substituted furan. The product formed undergoes a retro-Diels–Alder reaction at a temperature of around 60 °C. This is an example of a thermally cleavable surfactant.     

Observations of the effect of anionic, cationic, neutral, and zwitterionic surfactants on the Belousov-Zhabotinsky reaction

In this paper we report the experimental observations of the effects of various surfactants on the oscillations of the ferroin-catalyzed Belousov-Zhabotinsky (BZ) reaction. The oscillations are followed by observing the change in absorbance at 510 nm due to ferroin in a well-stirred closed BZ reacting system. We have used sodium dodecyl sulfate (SDS) as the anionic surfactant, cetyl trimethylammonium bromide (CTAB) as the cationic surfactant, Triton X-100 as the neutral surfactant, and 3-[(3-cholamidopropyl)dimethylammonio)]-1-propanesulfonate (CHAPS) as the zwitterionic surfactant. In general, we observed that there is a change in the oscillation behavior in the presence of each of these surfactants above their critical micellar concentrations. For different surfactants, the time-dependent evolution of the oscillations is found to be characteristic of the surfactant. The results of our study suggest that the evolution of oscillations is most regular in the presence of micelles of SDS.