Liquid sampling–atmospheric pressure glow discharge (LS-APGD) ionization source for elemental mass spectrometry: preliminary parametric evaluation and figures of merit

A new, low-power ionization source for the elemental analysis of aqueous solutions has recently been described. The liquid sampling–atmospheric pressure glow discharge (LS-APGD) source operates at relatively low currents (<20 mA) and solution flow rates (<50 μL min⁻¹), yielding a relatively simple alternative for atomic mass spectrometry applications. The LS-APGD has been interfaced to what is otherwise an organic, LC-MS mass analyzer, the Thermo Scientific Exactive Orbitrap without any modifications, other than removing the electrospray ionization source supplied with that instrument. A glow discharge is initiated between the surface of the test solution exiting a glass capillary and a metallic counter electrode mounted at a 90° angle and separated by a distance of ~5 mm. As with any plasma-based ionization source, there are key discharge operation and ion sampling parameters that affect the intensity and composition of the derived mass spectra, including signal-to-background ratios. We describe here a preliminary parametric evaluation of the roles of discharge current, solution flow rate, argon sheath gas flow rate, and ion sampling distance as they apply on this mass analyzer system. A cursive evaluation of potential matrix effects due to the presence of easily ionized elements indicate that sodium concentrations of up to 50 μg mL⁻¹ generally cause suppressions of less than 50%, dependant upon the analyte species. Based on the results of this series of studies, preliminary limits of detection (LOD) have been established through the generation of calibration functions. While solution-based concentration LOD levels of 0.02–2 μg mL⁻¹ are not impressive on the surface, the fact that they are determined via discrete 5 μL injections leads to mass-based detection limits at picogram to single-nanogram levels. The overhead costs associated with source operation (10 W d.c. power, solution flow rates of <50 μL min⁻¹, and gas flow rates <10 mL min⁻¹) are very attractive. While further optimization in the source design is suggested here, it is believed that the LS-APGD ion source may present a practical alternative to inductively coupled plasma sources typically employed in elemental mass spectrometry.     

Ionic (liquid) matrices for matrix-assisted laser desorption/ionization mass spectrometry—applications and perspectives

A large number of matrix substances have been used for various applications in matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). The majority of matrices applied in ultraviolet-MALDI MS are crystalline, low molecular weight compounds. A problem encountered with many of these matrices is the formation of hot spots, which lead to inhomogeneous samples, thus leading to increased measurement times and hampering the application of MALDI MS for quantitative purposes. Recently, ionic (liquid) matrices (ILM or IM) have been introduced as a potential alternative to the classical crystalline matrices. ILM are equimolar mixtures of conventional MALDI matrix compounds such as 2,5-dihydroxybenzoic acid (DHB), α-cyano-4-hydroxycinnamic acid (CCA) or sinapinic acid (SA) together with organic bases [e.g., pyridine (Py), tributylamine (TBA) or N,N-dimethylethylenediamine (DMED)]. The present article presents a first overview of this new class of matrices. Characteristic properties of ILM, their influence on mass spectrometric parameters such as sensitivity, resolution and adduct formation and their application in the fields of proteome analysis, the measurement of low molecular weight compounds, the use of MALDI MS for quantitative purposes and in MALDI imaging will be presented. Scopes and limitations for the application of ILM are discussed.     

Analysis of ancient Greco–Roman cosmetic materials using laser desorption ionization and electrospray ionization mass spectrometry

Microsamples of pink cosmetic powders from the Greco–Roman period were analyzed using two complementary analytical approaches for identification of the colouring agents (lake pigments originally manufactured from madder plants with an inert binder, usually a metallic salt) present in the samples. The first technique was a methanolic acidic extraction of the archaeological samples with an additional ethyl acetate extraction of the anthraquinone-type colouring agents which were identified using high performance liquid chromatography coupled to electrospray ionization with high resolution mass spectrometry (LC–ESI–HRMS), and the second was direct analysis of a microsample by laser desorption ionization–mass spectrometry (LDI–MS). The latter technique is well suited when the quantity of samples is very low. This soft ionization technique enables the detection of very small quantities of compounds using the combination of positive and negative-ion modes. It was also successfully applied for the direct analysis of some laboratory-made reference compounds. However, the presence of lead in one of these ancient samples induced a spectral suppression phenomenon. In this case and conditional on a sufficient quantity of available sample, the former method is better adapted for the characterization of these anthraquinone-type molecules. This study also confirmed that purpurin, munjistin, and pseudopurpurin are the principal colouring agents present in these ancient cosmetic powders constituted from madder plants. Presented at the Annual French National Symposium on Mass Spectrometry, Electrophoresis and Proteomics, 20–23 September 2007 in Pau, France.     

Analysis of caffeic acid derivatives in echinacea extracts by liquid chromatography particle beam mass spectrometry (LC–PB/MS) employing electron impact and glow discharge ionization sources

A liquid chromatography–particle beam/mass spectrometry (LC–PB/MS) method with electron impact (EI) and glow discharge (GD) ionization sources is presented for the determination of caffeic acid derivatives in echinacea tinctures. In this work, two commercially available echinacea ethanolic extracts were used as the test samples for the separation, identification, and quantification of the caffeic acid derivatives (caffeic acid, chlorogenic acid, cichoric acid, and caftaric acid), which are suggested to have beneficial medicinal properties. Detailed evaluations of the two primary controlling parameters for EI (electron energy and source block temperature) and GD (discharge current and pressure) sources were performed to determine optimal instrument operation conditions. The mass spectra obtained from both ion sources provide clear and simple molecular fragmentation patterns for each of the target analytes. The absolute detection limits for the caffeic acid derivatives were determined to be at subnanogram levels for both the EI and GD sources. The separation of the caffeic acid derivatives in echinacea was accomplished by reversed-phase chromatography using a C₁₈ column and a gradient elution system of water containing 0.1% trifluoroacetic acid and methanol, with an analysis time of less than 40 min. A standard addition method was employed for the quantification of each of the caffeic acid derivatives in the tincture.     

Alkaloid profiling of the Chinese herbal medicine Fuzi by combination of matrix-assisted laser desorption ionization mass spectrometry with liquid chromatography–mass spectrometry

A matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) method was developed for the high throughput and robust qualitative profiling of alkaloids in Fuzi—the processed lateral roots of the Chinese herbal medicine Aconitum carmichaeli Debx (A. carmichaeli). After optimization, powdered roots – without any further sample preparation – could be used to screen for the presence of Aconitum alkaloids. Furthermore, the semi-quantitative potential of MALDI-MS was confirmed using liquid chromatography–mass spectrometry (LC–MS) as reference. In total over sixty alkaloids were detected by LC–MS and fifteen of them were tentatively identified. Both MALDI-MS and LC–MS analysis revealed significant variation in alkaloid content in different (commercial) samples. LC–MS analysis of three toxic alkaloids in 14 batches of Fuzi resulted in a variation of their concentrations expressed as RSDs of 138%, 99% and 221% for aconitine, hypaconitine and mesaconitine, respectively. The variation in concentrations (expressed as RSD) of about the ninety constituents detected were classified as follows: 13 constituents showed an RSD of 77–100%, 46 with an RSD of 100–150%, 21 with an RSD of 150–200% and 9 constituents with an RSD in concentration of 200–235%. These results demonstrate a strong difference in chemical composition of the various Fuzi and illustrate the necessity of adequate QA/QC procedures for both safety and efficiency of herbal medicine. The described analytical procedures for alkaloid profiling could play a role in these procedures.     

Environmental PAH analysis by gas chromatography–atmospheric pressure laser ionization–time-of-flight–mass spectrometry (GC-APLI-MS)

The application of polycyclic aromatic hydrocarbon (PAH) analysis by gas chromatography coupled with atmospheric pressure laser ionization and mass spectrometry (GC-APLI-MS) to environmental samples was investigated in the study. The limit of detection for 40 PAH in a standard mixture was 5–100 fg, demonstrating GC-APLI-MS to be a highly sensitive technique and more sensitive by a factor of 100–3,500 compared to GC-MS. Acenaphthylene and cyclopenta[cd]pyrene were not detectable <2,500 fg per injection. To make use of this very high PAH sensitivity, the technique was applied to samples of environmental interest with limited available sample amounts such as particulate matter (PM), soot and a sample from a bioaccumulation test with Lumbriculus variegatus. First, special sample preparation was necessary and ultrasonic extraction proved to be suitable, if a thorough clean-up was performed and plastic materials avoided. By GC-APLI-MS and GC-MS, 224 and 28 single PAH compounds were detected in PM, about 1,000 and 15 in birch soot, and 9 and 2 in worm tissue, respectively, revealing the enormous potential of the method. The selectivity of GC-APLI-MS was shown for a crude oil where >2,200 PAH were detected without any sample preparation.     

In-spray supercharging of intact proteins by capillary electrophoresis–electrospray ionization–mass spectrometry using sheath liquid interface

Capillary electrophoresis (CE) coupled with electrospray ionization (ESI) mass spectrometry (MS) is a suitable technique for the analysis of intact proteins. The main configuration to realize this coupling is the sheath liquid interface, which is characterized by the addition of a make-up liquid providing the electric contact as well as the appropriate flow and solvent composition for optimal ionization and evaporation. One main advantage of this interface is that the composition of the sheath liquid can be tuned to modify the ionization without affecting CE selectivity and efficiency. In the case of protein ionization, this feature is particularly interesting to modulate their charge-state distribution (CSD), while keeping the separation performance unchanged.     

An analytical investigation of 24 oxygenated-PAHs (OPAHs) using liquid and gas chromatography–mass spectrometry

We developed two independent approaches for separation and quantitation of 24 oxygenated polycyclic aromatic hydrocarbons (OPAHs) using both liquid chromatography-atmospheric pressure chemical ionization/mass spectrometry (LC-APCI/MS) and gas chromatography-electron impact/mass spectrometry (GC-EI/MS). Building on previous OPAH research, we examined laboratory stability of OPAHs, improved existing method parameters, and compared quantification strategies using standard addition and an internal standard on an environmental sample. Of 24 OPAHs targeted in this research, 19 compounds are shared between methods, with 3 uniquely quantitated by GC-EI/MS and 2 by LC-APCI/MS. Using calibration standards, all GC-EI/MS OPAHs were within 15 % of the true value and had less than 15 % relative standard deviations (RSDs) for interday variability. Similarly, all LC-APCI/MS OPAHs were within 20 % of the true value and had less than 15 % RSDs for interday variability. Instrument limits of detection ranged from 0.18 to 36 ng mL^?1 on the GC-EI/MS and 2.6 to 26 ng mL^?1 on the LC-APCI/MS. Four standard reference materials were analyzed with each method, and we report some compounds not previously published in these materials, such as perinaphthenone and xanthone. Finally, an environmental passive sampling extract from Portland Harbor Superfund, OR was analyzed by each method using both internal standard and standard addition to compensate for potential matrix effects. Internal standard quantitation resulted in increased precision with similar accuracy to standard addition for most OPAHs using 2-fluoro-fluorenone-¹³C as an internal standard. Overall, this work improves upon OPAH analytical methods and provides some considerations and strategies for OPAHs as focus continues to expand on this emerging chemical class.

Comparison of liquid chromatography-microchip/mass spectrometry to conventional liquid chromatography–mass spectrometry for the analysis of steroids

The feasibility of a microfluidic-based liquid chromatography-electrospray ionization/mass spectrometric system (HPLC-Chip/ESI/MS) was studied and compared to a conventional narrow-bore liquid chromatography-electrospray ionization/mass spectrometric (LC-ESI/MS) system for the analysis of steroids. The limits of detection (LODs) for oxime derivatized steroids, expressed as concentrations, were slightly higher with the HPLC-Chip/MS system (50–300 pM) using an injection volume of 0.5 μL than with the conventional LC-ESI/MS (10–150 pM) using an injection volume of 40 μL. However, when the LODs are expressed as injected amounts, the sensitivity of the HPLC-Chip/MS system was about 50 times higher than with the conventional LC-ESI/MS system. The results indicate that the use of HPLC-Chip/MS system is clearly advantageous only in the analysis of low-volume samples. Both methods showed good linearity and good quantitative and chromatographic repeatability. In addition to the instrument comparisons with oxime derivatized steroids, the feasibility of the HPLC-Chip/MS system in the analysis of non-derivatized and oxime derivatized steroids was compared. The HPLC-Chip/MS method developed for non-derivatized steroids was also applied to the quantitative analysis of 15 mouse plasma samples.     

UV–Vis spectroscopy and desorption/ionization mass spectrometry as the tools for investigation of adsorbed dye photodegradation

Research on Chemical Intermediates - The photodegradation of the cationic dyes methylene blue, acridine yellow and acridine orange adsorbed on TiO2, TiO2/SiO2, SiO2 and Ag/SiO2 mesoporous films has...     

Analysis of aldehydes in beer by gas-diffusion microextraction: Characterization by high-performance liquid chromatography–diode-array detection–atmospheric pressure chemical ionization–mass spectrometry

In this work, a recently developed extraction technique for sample preparation aiming the analysis of volatile and semi-volatile compounds named gas-diffusion microextraction (GDME) is applied in the chromatographic analysis of aldehydes in beer. Aldehydes—namely acetaldehyde (AA), methylpropanal (MA) and furfural (FA)—were simultaneously extracted and derivatized with 2,4-dinitrophenylhydrazine (DNPH), then the derivatives were separated and analyzed by high-performance liquid chromatography with spectrophotometric detection (HPLC–UV). The identity of the eluted compounds was confirmed by high-performance liquid chromatography–atmospheric pressure chemical ionization–mass-spectrometry detection in the negative ion mode (HPLC–APCI–MS). The developed methodology showed good repeatability (ca. 5%) and linearity as well as good limits of detection (AA–12.3, FA–1.5 and MA 5.4 μg L⁻¹) and quantification (AA–41, FA–4.9 and MA 18 μg L⁻¹); it also appears to be competitive in terms of speed and cost of analysis.     

Determination of serum cortisol using isotope dilution–liquid chromatography–mass spectrometry as a candidate reference method

We propose isotope-dilution mass spectrometry as a candidate reference method for determination of serum cortisol. The method uses liquid chromatography–mass spectrometry (LC–MS), interfaced with electrospray ionization, and selective monitoring of the [M+H]⁺ ions of cortisol and isotopically labeled cortisol. The isotope-dilution–liquid chromatography–mass spectrometry (ID–LC–MS) method simplifies sample-preparation, because samples are processed by simple solvent extraction without further clean-up and derivatization. We studied the time required for complete equilibration of endogenous cortisol and labeled cortisol spiked into serum and found it to be less than 1 h. The repeatability and the reproducibility of the method were evaluated and found to be 0.55% of the measurement value. CRM 192 and 193 from the Bureau Communautaire de Reference were analyzed for verification of the method. The results obtained from the ID–LC–MS method agreed with the certified values. The relative uncertainty of measurement results for samples in the range of a few tens of micrograms per kilogram to several hundred micrograms per kilogram was evaluated and found to be 0.56%. Immunoassay carried out by three independent clinical laboratories produced results more than 15% higher than this ID–LC–MS method, suggesting the presence of bias in the immunoassay methods.     

Resin and fatty-acid analysis by solid-phase extraction coupled to atmospheric pressure chemical ionization–mass spectrometry

Abstract

DNA biosensors are realised immobilising a DNA structure on a suitable transducer to obtain selective information. In this paper we show how the determination of low-molecular weight compounds with affinity for DNA was measured by their effect on the oxidation signal of the guanine peak of calf thymus DNA immobilised on the electrode sensor and investigated by chronopotentiometric analysis. The DNA biosensor is able to detect known intercalating and groove binding compounds. Applicability to river water samples was demostrated.

Moreover, a piezoelectric sensor coupled to a short oligonucleotide can be used as detector of the hybridisation reaction. We show as a model the detection of a specific mutation in apolipoprotein E (ApoE) gene.

Biotinylated 23-mer probes were immobilised on the streptavidin coated gold surface of a quartz crystal; the protein was covalently bound to the thiol/dextran modified gold surface. The device was able to distinguish different synthetic oligonucleotides. The hybridisation reaction was also performed using real samples of DNA extracted from human blood and amplified by Polymerase chain reaction PCR. The extension of such procedure to samples of environmental interest is discussed.     

Microchip capillary electrophoresis–electrospray ionization–mass spectrometry of intact proteins using uncoated Ormocomp microchips

We present rapid (<5 min) and efficient intact protein analysis by mass spectrometry (MS) using fully microfabricated and monolithically integrated capillary electrophoresis–electrospray ionization (CE–ESI) microchips. The microchips are fabricated fully of commercial inorganic–organic hybrid material, Ormocomp, by UV-embossing and adhesive Ormocomp–Ormocomp bonding (CE microchannels). A sheath-flow ESI interface is monolithically integrated with the UV-embossed separation channels by cutting a rectangular emitter tip in the end with a dicing saw. As a result, electrospray was produced from the corner of chip with good reproducibility between parallel tips (stability within 3.8–9.2% RSD). Thanks to its inherent biocompatibility and stable (negative) surface charge, Ormocomp microchips enable efficient intact protein analysis with up to ∼10⁴ theoretical separation plates per meter without any chemical or physical surface modification before analysis. The same microchip setup is also feasible for rapid peptide sequencing and mass fingerprinting and shows excellent migration time repeatability from run to run for both peptides (5.6–5.9% RSD, n = 4) and intact proteins (1.3–7.5% RSD, n = 3). Thus, the Ormocomp microchips provide a versatile new tool for MS-based proteomics. Particularly, the feasibility of the Ormocomp chips for rapid analysis of intact proteins with such a simple setup is a valuable increment to the current technology.