Triad sequence determination of ethylene–propylene copolymers – application of quantitative 13C NMR

A methodology for acquiring fully quantitative ¹³C{¹H} NMR spectra for high performance ethylene–propylene copolymers has been proposed. To minimize the spectral acquisition time without sacrificing spectral quality, different amounts of chromium(III)acetylacetonate relaxation agent has been added to optimize its concentration. The study demonstrates the critical setting of delay time for determining six triad distributions from eight discrete set of resonances which otherwise leads to inaccurate determination of triad concentrations. It allows precise integral measurements of low intensity resonances depending on copolymer composition, and significant reduction of experimental time.     

Pyrolysis kinetics of ethylene–propylene (EPM) and ethylene–propylene–diene (EPDM)

The thermal degradation kinetics of several ethylene–propylene copolymers (EPM) and ethylene–propylene–diene terpolymers (EPDM), with different chemical compositions, have been studied by means of the combined kinetic analysis. Until now, attempts to establish the kinetic model for the process have been unsuccessful and previous reports suggest that a model other than a conventional nth order might be responsible. Here, a random scission kinetic model, based on the breakage and evaporation of cleavaged fragments, is found to describe the degradation of all compositions studied. The suitability of the kinetic parameters resulting from the analysis has been asserted by successfully reconstructing the experimental curves. Additionally, it has been shown that the activation energy for the pyrolysis of the EPM copolymers decreases by increasing the propylene content. An explanation for this behavior is given. A low dependence of the EPDM chemical composition on the activation energy for the pyrolysis has been reported, although the thermal stability is influenced by the composition of the diene used.     

Crystallization,melting and spherulitic structure of Β-nucleated random propylene copolymers

The characteristics of crystallization, melting and spherulitic growth of a random propylene copolymer (PRC) containing small amount of ethylene were studied in the presence of a selective -nucleating agent (calcium pimelate). It was established that the products of isothermal and non-isothermal crystallization are very rich in -modification but have mixed polymorphic composition. The formation of -modification may be attributed to -transition on the surface of growing -spherulites resulting in -twin-spherulites. During melting of PRC of -modification, the characteristics observed with -nucleated propylene homopolymers, namely, a -recrystallization of recooled samples and separated melting of non-recooled samples (i.e. the melting memory effect), as well as a -recrystallization leading to a perfection of the structure within the -modification, are also demonstrated. The disturbance of regularity of the polymer chain highly reduces the tendency to -crystallization. In contrast to the observations with propylene homopolymers, the growth rate of -modification (G ) is higher than that of -modification (G ) and no critical crossover temperature can be found (T()=413 K) below whichG >G . The experimental results show that a partial disturbance of chain regularity by incorporation of comonomer units considerably reduces the tendency to -crystallization.This research was supported by the National Scientific Research Fund (OTKA), the author is grateful for it. Thanks are due to Professor Géza Bodor for his help in X-ray diffractometric investigations and to Ms. Tünde Lócska for her prudential technical assistance in the optical experiments.     

Characterization of ethylene oxide–propylene oxide block copolymers by combination of different chromatographic techniques and matrix-assisted laser desorption ionization time-of-flight mass spectroscopy

Block copolymers of ethylene oxide (EO) and propylene oxide (PO) are characterized by combination of two-dimensional chromatography and MALDI-TOF-MS. Liquid chromatography under critical conditions (LCCC) is used as first dimension and fractions are collected, mobile phase evaporated and diluted in the mobile phase used in second dimension (SEC or LAC). This two-dimensional chromatography in combination of MALDI-TOF-MS gives information about purity of reaction products, presence of the byproducts, chemical composition and molar mass distribution of all the products.     

Enthalpy of mixing in the propylene oxide–dimethylformamide and propylene oxide–ethylene glycol systems

Heat of mixing of propylene oxide with N,N-dimethylformamide and ethylene glycol has been determined by means of microcalorimetry. Theoretically suggested choice of the aprotic solvent as a selective separating agent for the propylene oxide–methanol binary mixture has been experimentally justified.     

Selective assembly of cyclodextrins on poly(ethylene oxide)–poly(propylene oxide) block copolymers

This paper presents a computational study on the formation of a molecular necklace formed by specific threading of cyclodextrins (CDs) on block copolymers. Structural as well as energetic principles for the selective complexation of - and -cyclodextrin with poly(ethylene oxide)–poly(propylene oxide) block copolymers (PEO–PPO) are elucidated considering a diblock copolymer of equimolecular composition (PEO)4–(PPO)4 as guest. A non-statistical distribution of CDs, i.e. -CDs primarily located on the PEO chain and -CDs on PPO blocks of the polymer, is based on a variety of structural features and energetic preferences considering both potential as well as solvation energies. This selectivity becomes already obvious considering 1:1 complexes between PEO and PPO monomers and the two CDs, but is increasingly evident when calculating higher order ensembles. Besides the host–guest interaction, docking between CDs themselves is an important, also non-statistical, prerequisite for the self-assembly of highly ordered tubes. The formation of intermolecular hydrogen bonds between adjacent CDs in a tubular aggregate gives an important contribution to the overall stability of the molecular necklace. The net effect, based on the preferential interaction between host and guest as well as between the host molecules themselves, results in the formation of a stable, highly ordered macromolecular, multicomponent aggregate.     

The influence of water–organic solvent composition on the morphology and luminescent properties of CdS nanoparticles obtained by chemical precipitation

Cadmium sulfide (CdS) nanoparticles have been obtained by chemical precipitation onto the surface of single-crystalline silicon from an aqueous solution of ammonia, cadmium chloride (CdCl₂), and thiourea, as well as from water–DMSO and water–DMF mixtures with the same concentrations of the reagents. According to data of atomic force microscopy, the samples obtained from the aqueous solution consist of individual nanoparticles and agglomerates thereof with sizes of no larger than 1 µm. Materials obtained from the water–organic mixtures are distinguished by the aggregation of CdS nanoparticles into threadlike chains. The length of the formed curved chains and the size of CdS nanoparticles composing them depend on the nature and amount of an organic component of a mixture. Atomic force microscopy, transmission electron microscopy, and photoluminescence spectroscopy data have shown that the average size of CdS nanoparticles is 2–2.5 nm depending on solvent composition.     

Crosslinking of metallocenic α-olefin propylene copolymers by vacuum gamma irradiation

Metallocenic polypropylene and copolymers with 3.7, and 9.2 mol% of hexene and 3.0 mol% of octadecene comonomer content were synthesized without the presence of additives and irradiated with ⁶⁰Co gamma radiation under vacuum at room temperature. Size Exclusion Cromatography and gel extraction data showed that scission reactions predominate over crosslinking in the homopolymer and that there is a dose from where crosslinking started to increase considerably, in the irradiated copolymers. Rheology also showed evidence of chain-enlargements on the copolymers by means of an increase in the viscoelastic properties of the irradiated material.     

Analysis of chemical profiles of insect adhesion secretions by gas chromatography–mass spectrometry

This article reports on the chemical analysis of molecular profiles of tarsal secretions of the desert locust Schistocerca gregaria (Forsskål, 1775) by gas chromatography hyphenated with quadrupol mass spectrometry (GC–MS) as well as ¹H-nuclear magnetic resonance (¹H NMR) spectroscopy. Special focus of this study was to elaborate on sampling methods which enable selective microscale extraction of insect secretions in a spatially controlled manner, in particular tarsal adhesive secretions and secretions located on cuticle surfaces at the tibia. Various solvent sampling procedures and contact solid-phase microextraction (SPME) methods were compared in terms of comprehensiveness and extraction efficiencies as measured by signal intensities in GC–MS. Solvent sampling with water as extraction solvent gave access to the elucidation of chemical profiles of polar compound classes such as amino acids and carbohydrates, but is extremely tedious. Contact SPME on the other hand can be regarded as a simplified and more elegant alternative, in particular for the lipophilic compound fraction. Many proteinogenic amino acids and ornithine as well as carbohydrate monomers arabinose, xylose, glucose, and galactose were detected in tarsal secretions after acid hydrolysis of aqueous extracts. Qualitatively similar but quantitatively significantly different molecular profiles were found for the lipid fraction which contained mainly n-alkanes and internally branched monomethyl-, dimethyl-, and trimethyl-alkanes in the C23–C49 range as well as long chain fatty acids and aldehydes. Especially, hydrocarbons with >C40 carbon numbers have previously been rarely reported for insect secretions. The results suggest that the investigated insect secretions are complex emulsions which allow the attachment of tarsi on various otherwise incompatible materials of smooth and rough surfaces. The solid consistence of the established alkanes at ambient temperatures might contribute to a semi-solid consistence of the adhesive, amalgamating partly opposing functions such as slip resistance, tarsal release, desiccation resistance, and mechanical compliance. The methods developed can be extended to other similar applications of studying compositions of insect secretions of other species.     

Phase equilibrium in aqueous two-phase systems containing ethylene oxide–propylene oxide block copolymers and dextran

Phase equilibrium of aqueous two-phase systems containing the polysaccharide dextran and ethylene oxide (EO)/propylene oxide (PO) triblock copolymers was investigated in this work. Phase diagrams at 25.0 °C were experimentally obtained for systems formed by either dextran 19 (average molar mass of 8200 g mol⁻¹) or dextran 400 (average molar mass of 236 kg mol⁻¹) and one of the following block copolymers F38, F68, F108, P105 and P103, which present different structures in terms of EO/PO ratios and molar masses. It was possible to assess the influence of the polymer features on the phase equilibrium: the main factors affecting phase equilibrium being the size of dextran molecule and the structure (mainly the EO/PO ratio) of the copolymer. The Flory–Huggins equation was used to correlate the experimental data with good qualitative agreement, allowing the inference that changes in the copolymer hydrophobicity are the main responsible for the observed phase diagrams.     

A new equation for the correlation of surface tension–composition data of solvent–solvent and solvent–fused salt mixtures

An attempt has been made to propose accurate equations for correlating the surface tension of binary liquid mixtures. The method is applicable to the systems comprising of components with widely different molecular sizes. Two adjustable parameters, δ_p and δ_m obtained from the least squares analyses of the surface tension–composition data are reported for a number of systems. Temperature dependence of δ_p and δ_m is demonstrated for a few systems. The framework of operational equations has later been applied to cover multi-component systems comprising of fused salts with a single liquid component in full mole fraction range. Excellent fits of the surface tension for binary, ternary and multi-component ionic systems in aqueous or non-aqueous media have been obtained from the proposed method. The surface tension–composition data of 59 different types of systems with about 400 data points can be correlated by the equation with an average percent deviation of about 0.61. In contrast to previous equations from literature to calculate surface tension data, the proposed correlation is noted to be more accurate in different situations.     

Investigation of the chemical composition–antibacterial activity relationship of essential oils by chemometric methods

The antibacterial effects of Thymus vulgaris (Lamiaceae), Lavandula angustifolia (Lamiaceae), and Calamintha nepeta (Lamiaceae) Savi subsp. nepeta var. subisodonda (Borb.) Hayek essential oils on five different bacteria were estimated. Laboratory control strain and clinical isolates from different pathogenic media were researched by broth microdilution method, with an emphasis on a chemical composition–antibacterial activity relationship. The main constituents of thyme oil were thymol (59.95%) and p-cymene (18.34%). Linalool acetate (38.23%) and β-linalool (35.01%) were main compounds in lavender oil. C. nepeta essential oil was characterized by a high percentage of piperitone oxide (59.07%) and limonene (9.05%). Essential oils have been found to have antimicrobial activity against all tested microorganisms. Classification and comparison of essential oils on the basis of their chemical composition and antibacterial activity were made by utilization of appropriate chemometric methods. The chemical principal component analysis (PCA) and hierachical cluster analysis (HCA) separated essential oils into two groups and two sub-groups. Thyme essential oil forms separate chemical HCA group and exhibits highest antibacterial activity, similar to tetracycline. Essential oils of lavender and C. nepeta in the same chemical HCA group were classified in different groups, within antibacterial PCA and HCA analyses. Lavender oil exhibits higher antibacterial ability in comparison with C. nepeta essential oil, probably based on the concept of synergistic activity of essential oil components.     

Study of the compositional heterogeneity of ethylene–hexene-1 copolymers by thermal fractionation technique by means of differential scanning calorimetry

The successive self-nucleation/annealing technique (SSA) by differential scanning calorimetry has been applied to study the heterogeneity of ethylene–hexene-1 copolymers produced with supported catalytic systems of different compositions: highly active supported Ziegler–Natta (Z–N) catalysts—a titanium–magnesium catalyst TiCl₄/MgCl₂ (TMC) and a vanadium–magnesium catalyst VCl₄/MgCl₂ (VMC), a supported zirconocene catalyst Me₂Si(Ind)₂ZrCl₂/SiO₂ (MAO), and a chromium-oxide catalyst CrO₃/SiO₂. Comparative data by SSA technique with the same temperature program were obtained for copolymers differed by MWD from narrow to very broad (Mw/Mn = 2.4–54) and short chain branching distribution from narrow (zirconocene catalyst) to very broad (TMC and chromium oxide catalysts). It is demonstrated that copolymers produced with the zirconocene catalyst have the narrowest melting range and do not contain thick lamellae. The widest lamella thickness distribution has been found for a copolymer produced with the chromium-oxide catalyst. Copolymers produced with the supported Z–N catalysts are ranked in the middle with a more narrow lamella thickness distribution for copolymer prepared with VMC as compared with the one produced with TMC. The SSA results are compared with the data on copolymer fractionation by TREF. It is shown that these methods give a good correlation for copolymers with narrow short-chain branching distribution produced with the supported zirconocene catalyst. In the case of copolymers produced with TMC, TREF yields a higher content of the high-branched fractions.     

Optimization of the separation of a mixture of unknown composition by reversed-phase HPLC

A method is presented for the computer-assisted optimization of mobile phaseselection for the separation of a synthetic intermediate of unknown composition by reversed-phase HPLC.The method is based on recognition of the order of the peaks by comparisonof peak area ratio and followed by the BSOS-L(Binary Solvent Optimization System forHPLC)method.Excellent agreement was obtained between predicted data and experimentalresults.     

Chiral separation of triazole pesticide enantiomers by high performance liquid chromatography

Four triazole enantiomers of diclobutrazol (erythro form) (1), paclobutrazol (erythro form) (2), diniconazole (3) and uniconazole (4) have been separated by high performance liquid chro-matography (HPLC) on chiral stationary phase (CSP) OA-4700. Chromatographic data and a chiral recongnition model are presented for the separation of these pesticide enantiomers. The influence of column temperature and composition of mobile phase have been described.     

Solubility of naphthalene in aqueous solutions of poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) triblock copolymers and (2-hydroxypropyl)cyclodextrins

The solubility of naphthalene was investigated in aqueous solutions of triblock copolymers poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) (PEG–PPG–PEG) and (2-hydroxypropyl)cyclodextrins. The results with solutions of the individual solubilizers were as expected: the solubility enhancement was much higher with a micelle-forming copolymer than with the non-micellizing one and with (2-hydroxypropyl)--cyclodextrin (HPBCD) than with (2-hydroxypropyl)--cyclodextrin (HPACD). Although the formation of inclusion complexes between HPACD and PEG and between HPBCD and PPG is well established, the naphthalene solubility in mixed solutions does not significantly deviate from that predicted for a mixture of independent solubilizers. Thus the interactions between HPCD and PEG–PPG–PEG copolymers are not strong enough to disrupt micelles and aggregates formed by those copolymers. In fact, slight synergetic deviations were observed with the micellizing copolymer, indicating the existence of ternary naphthalene/HPCD/copolymer interactions. For pharmaceutical applications, it is important that the solubilization efficacy of PEG–PPG–PEG copolymers and that of cyclodextrins modified by the 2-hydroxypropyl group would not be compromised if these two types of solubilizers were co-administered.     

Determination of isoascorbic acid in fish tissue by hydrophilic interaction liquid chromatography–ultraviolet detection

A new hydrophilic interaction liquid chromatographic (HILIC) method for the simultaneous determination of isoascorbic (IAA) and ascorbic acid (AA) was developed. The separation of IAA and AA was studied in various HILIC stationary phases and the influence of the composition of the mobile phase, the ionic strength and the column temperature to the chromatographic characteristics is presented. The final method used an aminopropyl column under isocratic elution with acetonitrile–100 mM ammonium acetate solution (90:10, v/v) at a flow rate of 0.4 mL/min and a detection wavelength of 240 nm. This method was validated and the calibration curves were found to be linear in the range of 1.0–65 μg/mL for both IAA and AA. The method limit of detection for IAA determination in fish tissue was 2.3 μg/g. Inter-day precision (as %RSD_R) was ranged between 0.56% and 8.3% at three concentration levels, whereas the respected recoveries ranged between 82% and 98%. This method was applied to the determination of IAA (as additive E315) in frozen redfish samples. The hyphenation of the HILIC separation with a tandem mass spectrometer was also studied and the problems encountered with negative electrospray ionization under HILIC separation conditions are discussed.     

Characterization of thermal decomposition behavior of commercial flame-retardant ethylene–propylene–diene monomer (EPDM) rubber

Journal of Thermal Analysis and Calorimetry - The thermal decomposition behavior of the commercial flame-retardant ethylene–propylene–diene monomer (EPDM) rubber was studied employing...     

Synthesis and characterization of alternating fluorene–thiophene copolymers bearing ethylene glycol side-chains

Abstract  

New alternating fluorene–thiophene copolymers are introduced bearing polar ethylene glycol-carboxylate functionalities on the thiophene ring to achieve enhanced solubility in polar solvents. Suzuki polycondensation was applied to synthesize a set of three polymers with differing lengths of the ethylene glycol side-chains. The polymers are thermally stable up to temperatures of 300 °C. Solutions of the polymers in CHCl₃ show an absorption maximum at approximately 397 nm and a luminescence maximum of 472 nm in solutions with quantum yield of 30%. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels have been determined to be at −5.7 and −2.6 eV, respectively.