Systematic studies on the determination of Hg-labelled proteins using laser ablation-ICPMS and isotope dilution analysis

A method was developed for the precise and accurate determination of ovalbumin labelled with p-hydroxy-mercuribenzoic acid (pHMB) using polyacrylamide gel electrophoresis with ns-laser ablation–inductively coupled plasma mass spectrometry. Following systematic optimisation of the ablation process in terms of detection sensitivity, two different quantification strategies were applied: external calibration using standards of the derivatized protein after ¹³C⁺ normalization and, as a proof of concept, label-specific isotope dilution analysis (IDA) using pHMB enriched in the isotope ¹⁹⁹Hg. Due to the inhomogeneous distribution of the protein within the gel bands, it could be demonstrated that the IDA approach was superior in terms of precision and accuracy. Furthermore, it permits a reliable quantification, if more complex separation protocols are applied, as typically occurring analyte loss and degradation can be compensated for as soon as complete mixture of spike and sample is achieved. The estimated limit of detection was 160 fmol in the case of ovalbumin. In contrast to earlier studies using metals naturally present in proteins, no loss of mercury was observed during separation under denaturing conditions and other sample preparation steps. Using label-specific IDA, the measured isotope ratios in the gel corresponded to recoveries between 95% and 103%.     

Direct determination of the enantiomeric purity of oxyphenonium using chiral HPLC with post-column extraction detection

Summary A method is described for the determination of the enantiomeric purity (enantiomeric excess) of the anticholinergic drug oxyphenonium. The method for this quaternary ammonium compound is based on the direct HPLC analysis with a chiral stationary phase. Two kinds of 1-acid glycoprotein-bonded phases were used.For the detection a post-column extraction with fluorescence detection of the ion-pair counter ion dimethoxyantracene sulphonate was used.     

Quantification of human growth hormone by amino acid composition analysis using isotope dilution liquid-chromatography tandem mass spectrometry

We describe an accurate method for protein quantification based on conventional acid hydrolysis and an isotope dilution-HPLC-mass spectrometry (ID-HPLC-MS) method. Sample purity was confirmed using capillary zone electrophoresis, HPLC and MS. The analyte protein, human growth hormone (hGH), was effectively hydrolyzed by incubation with 8 M hydrochloric acid at 130 °C for 48 h, where at least 1 μM of hGH was treated to avoid possible degradation of released amino acids during hydrolysis. Using a reversed-phase column, the analytes (isoleucine, phenylalanine, proline and valine) were separated within 5 min using an isocratic eluent comprising 10% acetonitrile containing 0.1% trifluoroacetic acid. The detection limit (signal to noise ratio of 3) of amino acids was 5.5-6.2 fmol per injection. The quantification precision (RSD) of amino acids for intra- and inter-day assays was less than 0.98% and 0.39%, respectively. Comparison with other biochemical and instrumental methods revealed substantially higher accuracy and reproducibility of the ID-HPLC-MS/MS method as expected. The optimized hydrolysis and analytical conditions in our study were suitable for accurate quantification of hGH.     

Determination of cyanuric acid using exact matching isotope dilution mass spectrometry

A high‐accuracy double isotope dilution mass spectrometric method using an exact matching approach with GC coupled to a mass spectrometer for the analysis of cyanuric acid in fortified milk powder was developed. Various parameters for sample clean‐up such as the type of SPE cartridge, GC column and type of derivatizing agent used were investigated. The method was found to be linear in the concentration range of 0.03 to 2 mg/kg of cyanuric acid in milk powder. LOD and LOQ were found to be 0.9 and 3 μg/kg, respectively. Recoveries in the range of 95.7 to 102.2% were obtained for the in‐house fortified milk powder samples, with RSD of measurements in the range of 0.2 to 3.0%. A metrological approach was undertaken to examine all possible biases that contributed to the combined measurement uncertainty of the method. This high‐accuracy method can serve as a reference method for techniques commonly applied in routine testing laboratories.     

The determination of zinc by substoichiometric isotope dilution

Recently, R??I?KA et al. proposed a determination of zinc in highly pure germanium dioxide by a substoichiometric extraction technique. In the present work, the effects on the substoichiometric extraction of equilibrium time, pH and interfering ions were investigated by radioactive tracer techniques and spectrophotometric measurements. The sensitivity of the procedure is limited by the blanks and the addition of oxalate ions can give rise to inaccurate results. The specific activity of ⁶⁵Zn was also determined by substoichiometric extraction.     

Stable isotope dilution method for the determination of guanidinoacetic acid by gas chromatography/mass spectrometry

For more than 30 years, guanidinoacetic acid (GAA), together with other guanidino compounds, has been proposed as an important marker for renal failure, in kidney transplantation, and for renal metabolism, especially for the metabolic activity of the renal proximal tubules. Since the discovery of the first patient with guanidinoacetic acid methyltransferase deficiency in 1994 by St?ckler et al. (Pediatr. Res. 1994; 36: 409), GAA has become of great interest for all laboratories involved in the diagnosis of metabolic diseases. In the literature there are several methods described for the determination of GAA, ranging from ion-exchange chromatography with post-column derivatisation, enzymatic methods, gas chromatography/mass spectrometry (GC/MS), to liquid chromatography/atmospheric pressure chemical ionisation mass spectrometry (LC/APCI-MS). Here a stable isotope dilution method for quantitative and accurate determination of GAA in urine, plasma, and cerebrospinal fluid is described. GAA is converted to the bis(trifluoromethyl)pyrimidine di(tert-butyldimethylsilyl) derivative by stepwise derivatisation with hexafluoroacetylacetone and N-(tert-butyldimethylsilyl)-N-methyltrifluoroacetamide (MTBSTFA). Analysis can be performed using a standard benchtop GC/MS system. For quantitative GAA determination with 1,2-(13)C-GAA as internal standard, selected ion monitoring is performed using m/z 460/462, with m/z 432/433 and 375/376 as qualifiers.     

High accuracy isotope dilution analysis for the determination of ethanol using gas chromatography-combustion-isotope ratio mass spectrometry

A procedure was established for the determination of ethanol in water samples by isotope dilution analysis. After spiking the sample with labelled [13C2]ethanol, it was analysed by gas chromatography-combustion-isotope ratio mass spectrometry. Results are reported for two certified reference materials and also ethanol solutions prepared for a CITAC (Co-operation on International Traceability in Analytical Chemistry) interlaboratory comparison. The certified reference materials were certified using the dichromate titration method at nominal levels of 80 and 200 mg per 100 mL. The CITAC solutions were prepared gravimetrically at nominal levels of 50, 80 and 200 mg per 100 mL. The results of the analysis agree well to within 0.5% of the gravimetric values of the different samples. The relative expanded standard uncertainties (with a coverage factor equal to 2) associated with the results varied between 0.18 and 0.37%, a range that encompassed the gravimetric values for the different samples. A complete uncertainty budget was also drawn up so that the different contributions could be identified and quantified. The main contributions were due to variations in the measured isotope amount ratios and a 'between' blend component introduced to quantify the contribution of factors such as the degree of matching of the isotope amount ratios between standards and samples used in the isotope dilution analysis.     

Simplified method for the Re-Os dating of molybdenite using acid digestion and isotope dilution ICP-MS

An analytical method was developed for Os-Re dating of molybdenite. The method is based on determination of Os and Re concentrations in molybdenite by isotope dilution inductively-coupled plasma mass spectrometry (ID-ICP-MS). Sample digestion and sample/spike equilibration were achieved by a two-stage autoclave-based procedure using a mixture of nitric and sulphuric acids. Os was separated from the sample digest by modified single-stage distillation of osmium tetraoxide (OsO₄) using elevated temperature and on-line addition of hydrogen peroxide. OsO₄(g) was trapped in a mixture of 0.05% thiourea in 0.05 M sodium hydroxide. An anion-exchange column was used to separate Re from excess Mo in the solution remaining after distillation. Os and Re isotope ratio measurements were performed by single-collector, double focusing inductively-coupled plasma mass spectrometry (ICP-MS) with on-line mass-bias correction. Typical instrumental precision was in the range 0.02-0.2% relative standard deviation (R.S.D.) depending on the analyte concentrations. Notorious Os memory effects in the ICP-MS introduction system were eliminated using 5% ammonia solution, both as matrix for final dilution of the trap mixture as well as for washing between the samples. The reproducibility of the entire analytical procedure was accessed by replicate dating of two molybdenite standards and three molybdenite separates, and was found to be in the range 0.87-1.52% R.S.D. Though accuracy of the method is limited by difficulties in evaluating exact concentration of Os in spike solution, ages obtained in the course of these work agrees well with previously published data.     

Accurate determination of element species by on-line coupling of chromatographic systems with ICP-MS using isotope dilution technique

The instrumental design for coupling different liquid chromatographic systems such as ion, reversed phase, and size exclusion chromatography as well as capillary gas chromatography, with ICP-MS for the determination of element species is described. For accurate analyses obtaining ‘real time’ concentrations of chromatographic peaks, the isotope dilution mass spectrometric (IDMS) technique is applied. Two different spiking modes are possible, one using species-specific and another one using species-unspecific spike solutions of isotope-enriched labelled compounds. The species-specific mode is only possible for element species well defined in their structure and composition, for example iodate or selenite, whereas the species-unspecific mode must be applied in all cases where the structure and composition of the species is unknown, for example, for metal complexes with humic substances. For accurate determinations by the isotope dilution technique the mass discrimination effect must also be taken into account. Iodate, iodide and organoiodine species, including those of humic substances, have been analysed in mineral, drinking and environmental water samples by coupling different liquid chromatographic methods with ICP-IDMS. Heavy metal complexes with humic substances in water samples of different origin have been characterized by size exclusion/ICP-IDMS. The possibilities of determining different environmental selenium species are discussed and the results for the analysis of selenite and selenate, which has been carried out by GC/ICP-IDMS after converting these species into a volatile piazselenol compound, are presented.     

Determination of rare earth impurities in high purity uranium by isotope dilution analysis

Summary An isotope dilution method for the determination of rare earth impurities in uranium has been developed and Ce, Nd, Sm, Eu and Gd have been determined in uranium oxide samples. The method involves isotopic dilution with enriched isotopes of the rare earths being measured, followed by the separation of rare earths from uranium. A mass spectrometer with thermionic source was used to determine the relative isotopic abundances in each of these rare earths. All these five elements were analysed selectively by preferential evaporation technique. Trace concentrations down to parts per billion range can be measured with good sensitivity and accuracy.

---

Bestimmung von Verunreinigungen an Seltenen Erden in hochreinem Uran durch Isotopenverdünnungsanalyse

Zusammenfassung Eine Isotopenverdünnungsmethode wurde ausgearbeitet zur Bestimmung von Ce, Nd, Sm, Eu und Gd in Uranoxidproben. Das Verfahren umfaßt isotopische Verdünnung mit angereicherten Isotopen der zu bestimmenden Elemente und nachfolgende Abtrennung der Seltenen Erden von Uran. Die relativen Isotopenhäufigkeiten wurden mit Hilfe eines Massenspektrometers mit thermischer Ionenquelle bestimmt. Alle fünf Elemente wurden durch selektive Verdampfung analysiert. Spurenkonzentrationen bis herab zum ppb-Bereich konnten mit guter Empfindlichkeit und Genauigkeit erfaßt werden.

     

The determination of lead in blood using isotope dilution inductively coupled plasma mass spectrometry

Isotope dilution inductively coupled plasma mass spectrometry (ID-ICP-MS) was applied to the certification of Pb in four levels of NIST blood SRM, 955a. This standard reference material (SRM) represents a significant improvement over the previous blood reference material and will greatly aid method development. The lowest level, 47.76 ng/g Pb was determined with analysis uncertainty (95% CI, ID-ICP-MS uncertainties) of less than 1% and the highest level, 517.9 ng/g Pb to 0.3%. Uncertainty in the lowest level was due to sample inhomogeneity and variability in the analytical blank as the RSD on ratio measurements was typically better than 0.2%. Properly applied isotope dilution coupled with careful isotope ratio measurements on the ICP-MS offers precision and accuracy for blood Pb analyses beyond what is currently obtainable with routine methods.     

Evaluation of online carbon isotope dilution mass spectrometry for the purity assessment of synthetic peptide standards

We present a novel method for the purity assessment of peptide standards which is applicable to any water soluble peptide. The method is based on the online ¹³C isotope dilution approach in which the peptide is separated from its related impurities by liquid chromatography (LC) and the eluent is mixed post-column with a continuous flow of ¹³C-enriched sodium bicarbonate. An online oxidation step using sodium persulfate in acidic media at 99 °C provides quantitative oxidation to ¹²CO₂ and ¹³CO₂ respectively which is extracted to a gaseous phase with the help of a gas permeable membrane. The measurement of the isotope ratio 44/45 in the mass spectrometer allows the construction of the mass flow chromatogram. As the only species that is finally measured in the mass spectrometer is CO₂, the peptide content in the standard can be quantified, on the base of its carbon content, using a generic primary standard such as potassium hydrogen phthalate. The approach was validated by the analysis of a reference material (NIST 8327), and applied to the quantification of two commercial synthetic peptide standards. In that case, the results obtained were compared with those obtained using alternative methods, such as amino acid analysis and ICP-MS. The results obtained proved the value of the method for the fast, accurate and precise mass purity assignment of synthetic peptide standards.     

The determination of nitrogen in metals by isotope dilution

A wet chemical procedure for determining the amount of nitrogen in a metal or alloy has been developed which utilizes the isotope dilution technique. Ammonium sulfate, either enriched or depleted in ¹⁵N, is added to the metal sample during solution procedures. Ammonium ions resulting from the hydrolysis of bound nitrogen in the metals mix with that of the tracer and the total is then oxidized to N₂ in which form the element is analyzed in the mass spectrometer. The method has been tested on a variety of metals and alloys including thorium, lanthanum, yttrium, titanium, chromium, manganese, various steels, nickel-chromium, ferrotitaniuin, ferromanganese and ferrochromium. The range of nitrogen in these materials was from -2 ppm to almost 6%. Average precision was generally better than ± 5%.     

Rapid determination of amino acid incorporation by stable isotope labeling with amino acids in cell culture (SILAC)

Stable isotope labeling with amino acids in cell culture (SILAC) has evolved to be a major technique for quantitative proteomics using cell cultures. We developed a rapid method to follow and determine the incorporation of arginine and lysine. Analysis of the heavy state is required to avoid quantification errors. Moreover, the mixture of light and heavy states can be exploited to normalize the protein amount for subsequent relative quantification experiments. Therefore, peptides from different cell lines were extracted with 0.1% trifluoroacetic acid and analyzed by matrix-assisted laser desorption/ionization tandem time-of-flight (MALDI-TOF/TOF) mass spectrometry (MS). This analysis was highly reproducible and was performed in less than 2 h, significantly faster than other methods for the same purpose. Similar peptide mass profiles were obtained for human EBV-transformed B, Jurkat T, and HeLa cells as well as for mouse embryonic fibroblasts. Proteolytic fragments of 27 human proteins were identified with 56 peptides by MALDI-MS/MS and can be used as a database for these kinds of experiments. Sequencing revealed that the peptides were predominantly amino- and carboxy-terminal protein fragments displaying a specificity characteristic of the acidic proteases cathepsin D and E. Many of the identified peptides contained arginine and/or lysine, allowing determination of the incorporation rate of these amino acids. Furthermore, the rate of conversion of arginine into proline could be monitored easily.     

Multi-element determination in environmental samples by mass spectrometric isotope dilution analysis using thermal ionization

Summary A procedure for multielement analysis using mass spectrometry with thermal ionization and the isotope dilution technique was developed. The analytical procedure was checked by investigating the Standard Reference Material no. 1575 Pine Needles supplied by the National Bureau of Standards, USA. The concentrations of the elements Fe, Ni, Cu, Zn, Ga, Rb, Sr, Cd, Tl, and Pb were simultaneously determined in this material. The total amount of ions observed in the mass spectrum originating from the material investigated is discussed. It follows that it might be possible to increase the number of elements determinable simultaneously to 19.

---

Multielementbestimmung in Umweltproben nach der massenspektrometrischen Isotopenverdünnungsmethode mit thermischer IonisationTeil I: Fichtennadeln

Zusammenfassung Ein Verfahren für die Multielement-analyse nach der massenspektrometrischen Isotopenverdünnungsmethode mit thermischer Ionisation wurde entwickelt. Eine Überprüfung des Analysenverfahrens erfolgte durch die Untersuchung des Standardreferenzmaterials Nr. 1575 Pine Needles, National Bureau of Standards, USA. In diesem Material konnten die Konzentrationen der Elemente Fe, Ni, Cu, Zn, Ga, Rb, Sr, Cd, Tl und Pb simultan bestimmt werden. Die insgesamt im Massenspektrum beobachteten, zur Probe gehörenden Ionen werden diskutiert. Hieraus folgt, daß es möglich sein könnte, die Zahl der gleichzeitig zu bestimmenden Elemente bis auf 19 zu vergrößern.

     

Mass-spectrometric determination of uranium by means of isotope dilution analysis

The paper describes experience concerning the determination of uranium in nuclear fuels by mass-spectrometric isotope dilution analysis. As a spike, the solution of²³³U was used. The method was applied to the uranium content determination in non-irradiated and irradiated samples of nuclear fuels.     

3,5-dinitrobenzoyl amino acid esters. Broadly applicable chiral solvating agents for NMR determination of enantiomeric purity.

Methyl esters of N-(3,5-dinitrobenzoyl)-amino acids have been used as chiral solvating agents to induce NMR spectral nonequivalence between the enantiomers of a broad array of solutes.