meso–meso‐Linked Diarylamine‐Fused Porphyrin Dimers

A meso–meso‐linked diphenylamine‐fused porphyrin dimer and its methoxy‐substituted analogue were synthesized from a meso–meso‐linked porphyrin dimer by a reaction sequence involving Ir‐catalyzed β‐selective borylation, iodination, meso‐chlorination, and S_NAr reactions with diarylamines followed by electron‐transfer‐mediated intramolecular double C?H/C?I coupling. While these dimers commonly display characteristic split Soret bands and small oxidation potentials, they produced different products upon oxidation with tris(4‐bromophenyl)aminium hexachloroantimonate. Namely, the diphenylamine‐fused porphyrin dimer was converted into a dicationic closed‐shell quinonoidal dimer, while the methoxy‐substituted dimer gave a meso–meso, β‐β doubly linked porphyrin dimer.     

Use of Ag(II) as a removable template in porphyrin chemistry: diol cleavage products of [meso-tetraphenyl-2,3-cis-diolchlorinato]silver(II)

The use of Ag^II as a removable template in synthetic porphyrin chemistry is described. Mild procedures for the insertion of Ag^II into chlorins and the demetallation of the [chlorinato]Ag^II complexes are delineated. The UV-vis spectra of the novel [chlorinato]Ag^II complexes are discussed. The diol cleavage products of [meso-tetraphenyl-2,3-diolchlorinato]silver(II) under a number of conditions are characterized and compared to those resulting from the cleavage of the corresponding free base diol chlorin or its Ni^II complex, highlighting the unique templating effect of Ag^II. The scopes and limits of electrospray ionization mass spectrometry (ESI-MS) for the analysis of Ag^II chlorins is described. The use of Ag^II as a templating metal is superior over Ni^II or Zn^II for the preparation of free base pyrrole-modified porphyrins along metal templated pathways.     

Site-isolated porphyrin catalysts in imprinted polymers

A meso-tetraaryl ruthenium porphyrin complex having four polymerizable vinylbenzoxy groups (2) has been synthesized by reaction of pyrrole with 4-(vinylbenzoxy)benzaldehyde and subsequent metalation with [Ru3(CO)12]. The porphyrin complex was immobilized by copolymerization with ethylene glycol dimethacrylate. The resulting polymer P2 was found to catalyze the oxidation of alcohols and alkanes with 2,6-dichloropyridine N-oxide without activation by mineral acids. Under similar conditions, the homogeneous catalyst 2 was completely inefficient. By using diphenylaminomethane and 1-aminoadamantane as coordinatively bound templates during the polymerization procedure, the molecularly imprinted polymers P3 and P4 have been synthesized. Compared with the polymer P2, the imprinted catalysts displayed a significantly increased activity with rate enhancements of up to a factor of 16.     

A comparative study on the catalytic performance of heme and non‐heme catalysts: Metal porphyrins versus metal Schiff bases

Catalytic activity and oxidative stability of a series of iron and manganese porphyrins with 2‐chlorophenyl, phenyl and 4‐methoxyphenyl at the meso positions and metallosalens (Mn‐ and Fe‐salens) including N,N′‐bis(salicylidene)ethylenediamine, N,N′‐bis(5‐ chlorosalicylidene)ethylenediamine and N,N′‐bis(2,4‐dihydroxysalicylidene)ethylenediamine for the oxidation of olefins with tetra‐n‐butylammonium periodate (TBAP) and tetra‐n‐butyl‐ammonium Oxone (TBAO) have been investigated and compared. Although the metalloporphyrins showed an increased catalytic activity relative to the Schiff base complexes, the former provided no significant catalytic advantage over the latter. Also, a comparable or slightly higher oxidative stability was observed for the Schiff base complexes under the reaction conditions. Furthermore, in spite of large difference between the oxidizing ability of TBAO and TBAP, similar patterns were observed for the order of catalytic activity and oxidative stability of the used heme and non‐heme catalysts. The introduction of a methyl group at the ɑ position of styrene led to an increase in its reactivity, indicating the dominance of electronic effects over the steric ones in these catalytic systems.     

Chiral and Achiral Bis（2-oxazolinylphenolato）nickel（Ⅱ） Complexes-Synthesis, Crystal Structure, and Catalytic Properties

Introduction Oxidation was a very important reaction both in synthetic pathways and in industrial processes. Metal-catalyzed oxidation provided excellent alternatives in synthetic processes. However, molecular oxygen has been applied only in a limited number of metal-catalyzed oxidations, because it was very difficult to activate molecular oxygen and most of transition metal complexes were sensitive to oxygen. It was noted that metal-catalyzed Baeyer-Villiger oxidation was a convenient method…     

meso-四(对烷氧苯基)卟啉及其金属配合物的合成、表征及液 晶性

合成了meso-四(对烷氧苯基)卟啉及其Cu,Co,Zn,Pb金属配合物38个,其中14个为未见文献报道的新化合物。用元素分析,IR,UV,^1HNMR,MS对其进行了表征,确证了其结构。研究了这五个系列化合物的液晶性能,发现16个化合物具有液晶性,探讨了烷氧基链长及配位金属离子对液晶性能的影响。     

Intramolecular donor–acceptor copolymers containing side‐chain‐tethered perylenebis(dicarboximide) moieties for panchromatic solar cells

A series of side‐chain‐tethered copolymers containing the N‐(2‐ethylhexyl)‐N′‐(thiophene‐3‐yl)‐3,4:9,10‐perylenebis(dicarboximide) (thiophene‐PDI) moieties and 4,4‐diethylhexyl‐cyclopenta[2,1‐b:3,4‐b′]dithiophene unit were synthesized via Grignard metathesis polymerizations. With the incorporation of pendent perylenebis(dicarboximide) (PDI) moieties as acceptor side chains and thiophene as the donor backbone, the copolymers exhibited the intramolecular donor–acceptor characteristic and displayed a panchromatic absorption ranging from 290 to 1100 nm and ideal bandgaps of 1.49 to 1.52 eV. Due to the coplanarity of PDI moieties, the charge separation and transfer process were more effective and enhanced after photoexcitation. When increased the weight ratio of PC₆₁BM:polymer to 3, the J_sc could be raised significantly. The value of bandgap decreased slightly, and both V_oc and J_sc showed an upward trend with the increase of molar ratio of thiophene‐PDI unit from 50% (the copolymer P11) to 75% (the copolymer P13). The polymer/PC₆₁BM devices have shown a significant improvement from 0.45 to 1.66% with a judicious modulation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1978–1988     

Synthesis of mono meso-pyridyl 21,23-dithiaporphyrins and unsymmetrical non-covalent porphyrin dimers

A new method has been developed to synthesize 21,23-dithiaporphyrins having one pyridyl group at the meso position. The method required easily available unknown precursors and the condensation resulted in mono meso-pyridyl 21,23-dithiaporphyrins as single products in 8-11% yield. Two of the three mono meso-pyridyl N₂S₂ porphyrins were used to synthesize non-covalent unsymmetrical porphyrin dimers containing one N₂S₂ and one N₄ porphyrin cores.     

Synthesis and inversion barriers of undeca- and dodeca-substituted saddle shaped porphyrin complexes

Synthesis and barriers to inversion of a series of highly saddle shaped complexes are reported. The ΔG^≠ has decreased by 8 kJ mol⁻¹ at 243 K when the meso phenyl groups are replaced by bulkier 2,6-dichlorophenyl groups, and by 17 kJ mol⁻¹ when one of the peripheral ethyl groups is removed.     

Water-soluble supramolecular porphyrin dimer: self-organization of mono(imidazolyl)-substituted Zn porphyrin to a special-pair type dimer in water

Tris(4-carboxylphenyl)-mono(N-methylimidazolyl)-substituted Zn porphyrin was synthesized as a precursor for a water-soluble supramolecular porphyrin dimer. The dimer formation was performed in a NaHCO₃ aq solution (pH 8.4) and phosphate buffer solutions (pH 7.4-9.0). The split Soret bands of Zn porphyrin observed in the absorption spectra clearly showed self-organization to a special-pair type slipped cofacial dimer via metal coordination of imidazole even in water.     

New POCOP-type pincer complexes of Nickel(II)

The pincer complex [(POCOP)Ni(NCMe)][OSO₂CF₃] (1: POCOP = {2,6-(i-Pr₂PO)₂C₆H₃}) undergoes an acetonitrile substitution reaction in the presence of CN(t-Bu), KCN, and KOCN to give the new complexes [(POCOP)Ni{CN(t-Bu)}][O₃SCF₃] and (POCOP)Ni(X) (X = CN and NCO). The Ni-CN derivative is also obtained from a gradual decomposition of the Ni-CN(t-Bu) derivative, while the aquo derivative [(POCOP)Ni(OH₂)][O₃SCF₃] was obtained from slow hydrolysis of (POCOP)Ni(OSO₂CF₃). All new complexes have been characterized spectroscopically and by X-ray crystallography. IR and solid state structural data indicate that Ni-L/X interactions are dominated by ligand-to-metal σ-donation; presence of little or no π-backbonding is consistent with the electrophilicity of the cationic fragment [(POCOP)Ni]⁺.     

Controllable Assembly of Vanadium-Containing Polyoxoniobate-Based Materials and Their Electrocatalytic Activity for Selective Benzyl Alcohol Oxidation

During the controllable synthesis of two vanadium-containing Keggin-type polyoxoniobates (PONbs), [Ni(en)₂]₅[PNb₁₂O₄₀(VO)₅](OH)₅·18H₂O (1) and [Ni(en)₃]₅[PNb₁₂O₄₀(VO)₂]∙17H₂O (2, en = ethylenediamine) are realized by changing the vanadium source and hydrothermal temperature. Compounds 1 and 2 have been thoroughly characterized by single-crystal X-ray diffraction analysis, FT-IR spectra, X-ray photoelectron spectrum (XPS), powder X-ray diffraction (PXRD), etc. Compound 1 contains a penta-capped Keggin-type polyoxoniobate {PNb₁₂O₄₀(VO)₅}, which is connected by adjacent [Ni(en)₂]²⁺ units into a three-dimensional (3D) organic-inorganic framework, representing the first nickel complexes connected vanadoniobate-based 3D material. Compound 2 is a discrete di-capped Keggin-type polyoxoniobate {PNb₁₂O₄₀(VO)₂} with [Ni(en)₃]²⁺ units as counter cations. Compounds 1 and 2 have poor solubility in common solvents and can keep stable in the pH range of 4 to 14. Notably, both 1 and 2 as electrode materials are active for the selective oxidation of benzyl alcohol to benzaldehyde. Under ambient conditions without adding an alkaline additive, compound 1 as a noble metal free electrocatalyst can achieve 92% conversion of benzyl alcohol, giving a Faraday efficiency of 93%; comparatively, 2 converted 79% of the substrate with a Faraday efficiency of 84%. The control experiments indicate that both the alkaline polyoxoniobate cluster and the capped vanadium atoms play an important role during the electrocatalytic oxidation process.     

A new one pot and solvent-free synthesis of nickel porphyrin complex

Abstract

A new one pot and solvent-free synthesis of nickel porphyrin complex is described. This is prepared by condensing pyrrole, benzaldehyde, nickel (II) chloride, and 1,8-diazabicyclo [5.4.0] undec-7-ene as a base. This new method allows higher yields, reduced reaction times, ease of handling, and follows principles of green chemistry. The same complex is also prepared by an alternative route, i.e. first, the porphyrin is prepared and then the insertion of metal ion.     

Inclusion Complexes of Cyclodextrins with Tetrakis(4-carboxyphenyl)porphyrin and Tetrakis(4-sulfonatophenyl)porphyrin in Aqueous Solutions

In neutral and alkaline solutions, tetrakis(4-carboxyphenyl)porphyrin (TCPP) and tetrakis(4-sulfonatophenyl)porphyrin (TSPP) form 1:1 and 2:1 host–guest inclusion complexes with -cyclodextrin (-CD), -cyclodextrin (-CD), and 6-deoxy-6-diethylamino--CD (DEA--CD), except for DEA--CD in alkaline solution. On the other hand, TCPP and TSPP form only 1:1 inclusion complexes with 6-deoxy-6-dihexylamino--CD (DHA--CD). The limited solubilities of DEA--CD in alkaline solution and DHA--CD are likely responsible for no observation of the 2:1 inclusion complex containing DEA--CD in alkaline solution and that containing DHA--CD. The equilibrium constants (Ks) of TCPP and TSPP for the formation of the inclusion complexes have been estimated from the absorption and/or fluorescence intensity changes in neutral and alkaline solutions. The K₂ values, which are the equilibrium constants for the formation of the 2:1 host–guest inclusion complex from the 1:1 inclusion complex, are about one tenth the corresponding K₁ values, except for the -CD–TSPP system in alkaline solution. In neutral solution, where DEA--CD and DHA--CD are in protonated forms, the electrostatic force operates between DEA--CD (DHA--CD) and TCPP (TSPP), leading to the greater K values than those in alkaline solution, where DEA--CD and DHA--CD exist as neutral species.