多原子极性晶体中表面磁极化子的内部激发态

研究多原子极性晶体中表面磁极化子的内部激发态的性质，采用线性组合算符和幺正变换方法计算多原子极性晶体中表面磁极化子的第一内部激发态的能量。     

抛物量子点中强耦合磁极化子的性质

采用Pekar类型的变分方法研究了抛物量子点中强耦合磁极化子的基态和激发态的性质。计算了基态和激发态磁极化子的束缚能以及磁极化子的共振频率。讨论了这些量对回旋频率和有效限制强度的依赖关系,以及磁极化子光学声子平均数的性质,结果表明:由于Zeeman劈裂,抛物量子点中磁极化子的回旋共振频率劈裂为两支。基态和激发态磁极化子的束缚能以及磁极化子的共振频率都随回旋频率的增加而增大,随量子点的有效束缚强度的增大而减小。     

弱耦合多原子半无限晶体中磁极化子的激发能量

近年来国内外对多原子极性晶体中磁极化子性质的研究十分活跃,Zorkani等采用变分法计算了束缚磁极化子的基态能量,Kandemir等采用束缚朗道态讨论了二维大磁极化子的基态和第一激发态能量,国内一些学者采用微扰法和新颖算符法讨论了多原子极性晶体中表面和体磁极化子的性质。采用线性组合算符和幺正变换,研究磁场中多原子半无限极性晶体中电子和光学声子弱耦合相互作用所产生的极化子的第一激发态能量及平均声子数。结果表明:当电子无限接近晶体表面时,磁极化子的基态能量仅为Landau能量;第一激发态能量为Landau基态能量的2倍;平均声子数等于各支与电子耦合的体光学声子数和表面光学声子数之和。而当电子处于晶体深处时,磁极化子的基态能量却为Landau基态能量与各支体光学声子以及表面光学声子分别耦合的能量之和;第一激发态能量仍为Landau基态能量的2倍;平均声子数等于各支与电子耦合的体光学声子数和与所处深度有关的各支体光学声子数之和,而与各支表面光学声子无关。     

声子之间相互作用对磁场中表面极化子的诱生势的影响

研究极性晶体中电子与表面光学(SO)声子和体纵光学(BO)声子耦合弱的表面磁极化子的性质,采用线性组合算符和微扰法导出了极性晶体中表面磁极化子的有效哈密顿量。讨论了反冲效应中不同波矢声子之间相互作用对表面磁极化子诱生势的影响。     

非对称量子点中强耦合磁极化子激发态的性质

采用线性组合算符和幺正变换方法,研究非对称量子点中强耦合磁极化子的激发态性质。导出强耦合磁极化子的第一内部激发态能量、激发能量和从第一内部激发态到基态的跃迁谱线频率随量子点的横向和纵向有效受限长度、磁场的回旋频率和电子-声子耦合强度的变化关系。数值计算结果表明：第一内部激发态能量、激发能量和跃迁谱线频率随磁场的回旋频率和电子-声子耦合强度的增加而增大.随量子点的横向和纵向有效受限长度的减小而迅速增大,表现出奇特的量子尺寸效应。     

表面极化子光学声子平均数的磁场和温度依赖性

采用变分法、幺正变换和拉格朗日乘子法,研究了有限温度下纯二维晶体中表面磁极化子的性质.讨论了表面光学声子平均数、磁极化子振动频率λ与磁场B、温度T及Lsgrange乘子u之间的关系.对KCl晶体进行了数值计算,结果表明:磁极化子振动频率、表面光学声子平均数均随磁场B的增强而增加,且随温度T升高而增加.当bgrange乘子u超出慢电子范围时磁极化子振动频率、表面光学声子平均数均随u增加而增大且变化越来越显著.     

抛物量子点中强耦合束缚磁极化子的性质

采用Pekar类型的变分方法研究了抛物量子点中强耦合束缚磁极化子的基态和激发态的性质.计算了束缚磁极化子的基态和激发态的能量、光学声子平均数以及束缚磁极化子的共振频率.讨论了这些量对回旋频率和有效束缚强度以及库仑束缚势的依赖关系.数值计算结果表明:量子点中强耦合束缚磁极化子的基态能量和共振频率以及光学声子平均数均随量子点的有效束缚强度的增加而减小,基态能量随库仑束缚势的增加而减小,随回旋频率的增加而增大.     

二维非极性晶体中声学形变势表面磁极化子

本文研究磁场中二维非极性晶体通过形变势与声学声子强、弱耦合的表面极化子的性质。采用线性组合算符和拉格朗日乘子法导出表面磁极化子的基态能量。讨论了表面磁极化子的振动频率、基态能量和有效质量与磁场的关系。     

极性晶体中强耦合表面磁极化子特性

研究极性晶体中表面磁极化子的特性。采用Huybrechts线性组合算符和幺正变换方法,导出了晶体中强耦合表面磁极化子处于基态的振动频率和有效哈密顿量,讨论了坐标z的两种极限情况,对RbCl晶体进行了数值计算。结果表明:振动频率和平行有效哈密顿量随磁场的增加而增大。     

极性晶体中表面磁极化子的温度依赖性

本文讨论电子和体纵光学声子耦合弱,与表面光学声子耦合强时对表面磁极化子的温度特性的影响,用线性组合算符法研究表面磁极化子的振动频率和诱生势的温度依赖性.对AgCl晶体进行了数值计算.结果表明,极化子的振动频率和诱生势随温度的升高而减小.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.