多层介质中超声相控阵声场仿真*

由于良好的声束偏转与聚焦特性,超声相控阵已经广泛应用于多层固体介质的缺陷检测。当超声束经过多层介质时,由于反射、透射以及模式转换的存在,多种声束存在于这种结构中,使得声场分析变得复杂。为了提高多层介质检测的准确性,有必要对超声声场的分布规律进行深入地了解。该文结合高斯声束等效点源模型以及射线追踪法,给出了相控阵声源在多层固体介质中激发声场的仿真方法,并且模拟计算了一维线型相控阵在楔块-铝-黄铜-钢四层固体介质中的辐射声场。通过对不同延时法则的计算,实现了声波在这种复杂介质中的偏转与聚焦,进而研究了不同焦点处聚焦声场的分布。结果表明:相控阵方法能使聚焦点处的声场幅值增大,能量集中,提高了检测分辨率;不同聚焦点处声场聚焦效果不同,实际检测时应根据检测区域结构及位置特点,合理放置相控阵换能器。与瑞利积分法的比较表明,该文的仿真方法适用于多层介质相控阵声场的计算。     

经颅超声聚焦方法和声场特性研究

基于高分辨的CT数据建立了非均匀颅骨仿真模型,该模型引入了颅骨的声衰减系数,深入研究和分析了声波时间反转法和超声相控阵法在颅脑中的聚焦方法及效果。颅骨具有较强的声波衰减特性,使用时间反转聚焦时需要进行幅度补偿,对于0.7MHz的频率信号,幅度补偿后的时间反转聚焦声场主瓣宽度窄、旁瓣低,焦点处声场比无幅度补偿的时间反转法提高8.86dB,比超声相控阵聚焦法提高7.89dB,具有很好的空间聚焦精度和聚焦效率。研究了颅骨衰减系数、声场焦点位置、声波频率、换能器阵列位置和方位等参数对聚焦声场的影响,结果表明,幅度补偿时间反转法比相控阵法具有更低的旁瓣,且高频时的聚焦效果比相控阵好,相控阵聚焦对换能器阵列的位置和方位比较敏感,而时间反转经颅超声聚焦对声传播路径和入射角具有更高的鲁棒性。      

Field characterization of therapeutic ultrasound phased arrays through forward and backward planar projection

Spatial planar projection techniques propagate field measurements from a single plane in front of a transmitter to arbitrary new planes closer to or further away from the source. A linear wave vector frequency-domain projection algorithm is applied to the acoustic fields measured from several focused transducer arrays designed for ultrasound therapy. A polyvinylidene difluoride hydrophone is first scanned in a water tank over a plane using a three-dimensional positioning system to measure the complex pressure field as a function of position. The field is then projected to a series of new planes using the algorithm. Results of the projected fields are compared with direct measurements taken at corresponding distances. Excellent correlation is found between the projected and measured data. The method is shown to be accurate for use with phase-controlled field patterns, providing a rapid and accurate method for obtaining field information over a large spatial volume. This method can significantly simplify the characterization procedure required for phased-array application used for therapy. Most significantly, the wavefront propagated back to a phased array can be used to predict the field produced by different phase and amplitude settings of the array elements. A field back-projected to the source could be used as an improved source function in acoustic modeling.     

Acoustic characteristics of a heavy duty vehicle cooling module

Studies dedicated to the determination of acoustic characteristics of an automotive cooling package are presented. A shrouded subsonic axial fan is mounted in a wall separating an anechoic- and a reverberation room. This enables a unique separation of the up- and downstream sound fields. Microphone measurements were acquired of the radiated sound as a function of rotational speed, fan type and components included in the cooling module. The aim of the present work is to investigate the effect of a closely mounted radiator upstream of the impeller on the SPL spectral distribution. Upon examination of the SPL spectral shape, features linked specifically to the source and system are revealed. The properties of a reverberant sound field combined with the method of spectral decomposition permit an estimation of the source spectral distribution and the acoustic transfer response, respectively. Additionally, purely intrinsic acoustic properties of the radiator are scrutinized by standardized ISO methods. A new methodology comprising a dipole sound source is adopted to circumvent limitation of transmission loss measurement in the low frequency range. The sound attenuation caused by the radiator alone was found to be negligible.     

时间反演聚焦经颅磁声电刺激仿真与实验研究*

无创脑神经调控技术是生物医学领域的研究热点,经颅磁声电刺激是利用静磁场和声场的耦合而产生的感应电场作用于神经组织,对大脑的目标位置进行刺激和调控的一项技术。颅骨的存在使超声在传播过程中发生相位畸变和幅值衰减,聚焦区域偏离,难以实现精准聚焦。该文基于时间反演法,模拟颅内点声源发射脉冲以及超声传播过程,计算各个阵元接收到的时间差,按照后到先发的原则发射脉冲进行聚焦刺激。与传统相控阵聚焦相比,焦点偏移现象基本得到解决,焦域横向、纵向分辨率均有所提高,提高了声束聚焦精度和感应电场峰值。通过搭建实验平台,将两种聚焦方法所测得的声场归一化处理,验证了时间反演法能补偿焦点偏移,并通过实验证实了超声换能器声场和产生感应电场分布存在较高的一致性。基于真实颅脑结构的虚拟点源时间反演聚焦可以实现无创、精准、灵活的经颅磁声电刺激,有助于推动精准神经调控技术的发展。     

基于时间反转法的相控换能器声场的仿真研究

相控换能器具有焦距可调的优势。本文以82阵元相控换能器建立的3D数值仿真模型为例,基于时间反转法提取阵元的激励信号,利用时域有限差分(FDTD)法对Westervelt声波非线性传播方程进行声场数值仿真,研究不同阵元分布、偏离声轴的距离、设定焦距大小对形成声场的影响,可调控范围及其消除旁瓣方法。研究结果表明,随机分布相控阵可明显降低声场中的旁瓣;随着偏离声轴距离的增加,主瓣声压幅值逐渐减小,旁瓣与主瓣的最大声强比值r逐渐增大,且沿声轴的可调控范围逐渐减小;随声轴方向上设定焦距的增加,主瓣声压幅值先增大后减小,r值先减小后增大;基于时间反转法的高声压旁瓣消除法可在一定程度上扩大相控阵声场的可调控范围。     

圆环形聚焦声场的构建与调控

提出了一种由径向振动模式的圆环形压电换能器晶片组成的圆柱形阵列换能器结构, 依据阵元激励信号的相位调控机理, 推导了圆环形聚焦声场的调控公式, 在三维空间中构建了圆环形聚焦声场, 实现了对其聚焦区域大小、聚焦圆环半径以及轴向位置移动的调控. 理论分析和仿真研究表明, 所提出的圆柱形阵列换能器实现了对圆环形聚焦声场的调控. 为检测超声、功率超声、医学超声等应用领域提供了一种可实现的新型圆环形可调控聚焦声场.     

基于超声相控阵的环焊缝缺陷检测方法研究

针对传统超声探头焦距固定,检测位置的改变就要更换相应焦距的探头而影响检测效率的问题,提出一种基于超声相控阵换能器的环焊缝缺陷检测方法。而超声相控阵具有电子偏转和电子聚焦特性,能在不移动的情况下发射偏转聚焦超声束,有效地解决了上述问题。首先基于超声相控线阵换能器的声场特点,采用数值分析方法,研究了影响声束偏转聚焦性能的几个主要参数。然后给出了与超声相控阵换能器相连接的多通道数据采集系统结构。介绍了单通道声信号的硬件结构及相应的信号处理方法,实现了对换能器中单个阵元的精确延时的控制。实验结果表明,优化设计的超声相控线阵换能器具有较高的检测精度和检测效率。     

Two-dimensional phased arrays for surgical applications: Multiple focus generation and scanning

A numerical simulation and a comparative analysis of the acoustic fields produced by two-dimensional phased arrays intended for ultrasonic surgery are performed for the case of a multiple focus (in particular, 25 foci) generation. The calculations were conducted for arrays (with an operating frequency of 1.5 MHz) consisting of 256 elements 5 mm in diameter, which were positioned on the array surface both regularly and randomly. The array foci can be formed simultaneously, but, in this case, the intensity levels of the secondary peaks in the ultrasonic field can exceed the values that guarantee the safe application of this method in surgery. A much safer way is to synthesize many foci with the use of several configurations, each of which contains a smaller number of foci. The number of foci in individual configurations must be approximately the same. It is demonstrated that randomization of the element distribution over the array surface provides an opportunity to improve the array performance, to reduce the intensity levels of secondary peaks in the acoustic field, and to increase the array capability for multiple focus scanning off the array axis.     

Radiation Acoustic Field of a Linear Phased Array on a Cylindrical Surface

A new linear ultrasonic phased array fixed on a cylindrical surface is designed. This kind of the cylindrical phased array can meet the specific requirements of the application in testing pipe quality inside pipes. Using the transducer, we can not only avoid mechanical rotating but also test the quality of any point in a pipe by ultrasonic phase array technology. The focused acoustic field distributions in the axial, radial and tangential directions of the transducer are investigated theoretically by numerical simulation. The energy flux density, the width of the main lobe, the imaging resolution, the grating lobe elimination and other characteristics are analysed. The effect of the focal distance, effective aperture, transducer radius, number of total element, and steering angle on the acoustic field distribution is also studied.thoroughly. Many important results are obtained.     

STUDY ON THE RADIATION ACOUSTIC FIELD OF RECTANGULAR RADIATORS IN FLEXURAL VIBRATION

In this paper, the radiation acoustic field of a rectangular radiator in flexural vibration is studied. The radiator is a rectangular thin plate in flexural vibration with simply supported boundary conditions. Based on the theory of Rayleigh integral, the acoustic pressure distribution of the radiator in its far field is obtained analytically and the near acoustic field of the radiator is also computed numerically. In the near field, the three-dimensional acoustic pressure distribution is obtained. In the far field, the two- and three-dimensional acoustic pressure distribution patterns are calculated. The dependence of the radiation acoustic pressure of the radiator on the vibrational order of the plate in flexural vibration is analyzed. It is demonstrated that the radiation acoustic pressure along the central axis of the radiator is always zero in the near and far acoustic fields, and the radiation near acoustic field and the far acoustic field are both directional. This is different from the acoustic field generated by an oscillating piston. On the other hand, when the vibrational order is increased, the acoustic pressure distribution of the radiator becomes complex.     

带楔块二维面阵列超声相控阵声场特性分析

开展了带楔块二维面阵脉冲超声相控阵辐射声场特性的研究。将安装在一定角度斜楔块上二维面阵相控阵换能器声场问题简化为液固界面情况进行讨论。以单阵元在液固平界面条件下的辐射声场为基础,推导了聚焦偏转法则,给出了带楔块二维面阵超声相控阵声场计算方法。以检测材料为钢板,安装在倾斜角为36°有机玻璃楔块上的频率为5 MHz、8×8二维面阵相控阵的辐射声场计算为例,分析了在不同偏转角和不同聚焦深度下检测材料中的辐射声场特性。计算结果表明该方法可有效的分析带楔块二维面阵超声相控阵声场特性并用于指导二维超声面阵角束探头的设计。      

相控圆弧阵声源在TI地层井孔中产生的声场

研究了相控圆弧阵声源在各向异性地层井孔中产生的声场的特征,重点分析了该声源对于地层横波各向异性的方位敏感性,旨在探索一种新的地层声学各向异性测量方法。结果显示:相控圆弧阵声源在地层中可激发多种方位阶数的声场,主要成分为单极子波场和偶极子波场;在HTI地层竖直井中,方位角不同的圆弧阵声源激发的波动的速度不同,相控圆弧阵声源对于地层横波速度的方位各向异性的敏感性主要是它所激发的弯曲波的贡献。相比于传统的正交偶极子声波测井而言,采用相控圆弧阵声源可以评价井附近地层的周向非均质性,可以提高井周测量覆盖次数,提高反演结果的可靠性。另外,相控圆弧阵声源兼具备多极子声源的功能,优化的相位控制方式可以实现方位各向异性的最佳测量。      

界面条件下线型超声相控阵声场特性研究

开展了界面条件下线型超声相控阵声场特性的研究.将带有楔块的超声相控阵问题合理简化为液固界面的情况进行讨论.根据射线声学理论,计算了单阵元在液固界面存在时的辐射声场,进而推导了聚焦法则,得到了超声线型阵在液固界面存在时的声场、位移场表达式.对安装在楔块上的相控阵换能器的辐射声场进行了仿真,并讨论了聚焦对换能器轴向和横向声场的影响,结果表明利用聚焦能提高分辨率和灵敏度,但聚焦区域之外声束性能更差,在实际检测中要合理利用聚焦. 关键词： 超声相控阵 界面 声场 聚焦     

Development and investigation of ultrasound linear phased arrays for transrectal treatment of prostate

We used the rectangular radiator method as a numerical solution to the Rayleigh-Sommerfeld diffraction integral for calculating the acoustic fields produced by linear arrays. The appropriate phases and amplitudes of voltages applied to the elements were computed using the pseudo-inverse method. We have developed and acoustically evaluated several constructions of planar linear ultrasound phased arrays for transrectal thermotherapy of prostate diseases. The designs of the linear phased arrays used in this work were the result of compromise in terms of the choice of frequency and number and size of elements, in order to investigate a means of improving array performance which might lead to increased efficacy and safety of the thermal treatment. The results obtained are in agreement with the data of other studies and show that a linear plane phased array may be potentially useful for thermal therapy.     

Computed narrow-band azimuthal time-reversing array retrofocusing in shallow water.

The process of acoustic time reversal sends sound waves back to their point of origin in reciprocal acoustic environments even when the acoustic environment is unknown. The properties of the time-reversed field commonly depend on the frequency of the original signal, the characteristics of the acoustic environment, and the configuration of the time-reversing transducer array (TRA). In particular, vertical TRAs are predicted to produce horizontally confined foci in environments containing random volume refraction. This article validates and extends this prediction to shallow water environments via monochromatic Monte Carlo propagation simulations (based on parabolic equation computations using RAM). The computational results determine the azimuthal extent of a TRA's retrofocus in shallow-water sound channels either having random bottom roughness or containing random internal-wave-induced sound speed fluctuations. In both cases, randomness in the environment may reduce the predicted azimuthal angular width of the vertical TRA retrofocus to as little as several degrees (compared to 360 degrees for uniform environments) for source-array ranges from 5 to 20 km at frequencies from 500 Hz to 2 kHz. For both types of randomness, power law scalings are found to collapse the calculated azimuthal retrofocus widths for shallow sources over a variety of acoustic frequencies, source-array ranges, water column depths, and random fluctuation amplitudes and correlation scales. Comparisons are made between retrofocusing on shallow and deep sources, and in strongly and mildly absorbing environments.     

热疗用环形平面换能器声场特性的研究

引入负声源，导出了环形平面换能器声场的简洁表示式，计算了单个圆环、多个同心圆环同时激励及环阵相控聚焦声源产生的声场，分析了环的宽度、环数及聚焦点位置等因素对声场特征的影响。提出根据各阵元在声场中某点产生的声压的相位来确定各阵元电激励信号的延时，此方法较根据各阵元到该点的平均声程确定各阵元电激励信号的延时，能更难确地在该点实现聚焦。     

Complex ray method and its applications to underwater acoustics

In this paper,the principle of complex source point and various analyt-ical methods of complex ray are summarized.Some possible applications ofcomplex ray method to underwater acoustics are proposed,including complexray analysis of directional acoustic fields,complex ray simulation of directivityof acoustic radiator arrays,complex ray transformation of acoustic fields fromnear zone to far zone,as wel1 as theoretical prediction of sonar target strengthby complex ray method.     

海洋波导中目标声辐射场的计算方法

针对海洋波导中目标声辐射场的计算问题,提出了一种基于波叠加法并在近、远场采用不同水声传播模型的建模方法,可以将近、远场作为一个统一的系统进行高效地分析。该方法通过给定的已知表面振动速度的结构计算出目标内部虚拟点声源的源强,再配合在相应的水声环境中点声源传播模型的Green函数计算出结构外的声辐射场。以Green函数为纽带,在求源强和计算近场声辐射场时采用镜像虚源法,而在计算远场声辐射场时采用简正波法。通过该方法得到的有限水深波导中声速剖面为正梯度、负梯度、负跃层的3种情况下的脉动球、刚体摆动球的声辐射场计算结果与COMSOL的有限元计算结果进行对比,结果表明了该方法在提高计算效率的同时保证了计算精度。      

Effect of acoustic field parameters on arc acoustic binding during ultrasonic wave-assisted arc welding

As a newly developed arc welding method, power ultrasound has been successfully introduced into arc and weld pool during ultrasonic wave-assisted arc welding process. The advanced process for molten metals can be realized by utilizing additional ultrasonic field. Under the action of the acoustic wave, the plasma arc as weld heat source is regulated and its characteristics make an obvious change. Compared with the conventional arc, the ultrasonic wave-assisted arc plasma is bound significantly and becomes brighter. To reveal the dependence of the acoustic binding force on acoustic field parameters, a two-dimensional acoustic field model for ultrasonic wave-assisted arc welding device is established. The influences of the radiator height, the central pore radius, the radiator radius, and curvature radius or depth of concave radiator surface are discussed using the boundary element method. Then the authors analyze the resonant mode by this relationship curve between acoustic radiation power and radiator height. Furthermore, the best acoustic binding ability is obtained by optimizing the geometric parameters of acoustic radiator. In addition, three concave radiator surfaces including spherical cap surface, paraboloid of revolution, and rotating single curved surface are investigated systematically. Finally, both the calculation and experiment suggest that, to obtain the best acoustic binding ability, the ultrasonic wave-assisted arc welding setup should be operated under the first resonant mode using a radiator with a spherical cap surface, a small central pore, a large section radius and an appropriate curvature radius.