A novel X‐ray diffractometer for studies of liquid–liquid interfaces

The study of liquid–liquid interfaces with X‐ray scattering methods requires special instrumental considerations. A dedicated liquid surface diffractometer employing a tilting double‐crystal monochromator in Bragg geometry has been designed. This diffractometer allows reflectivity and grazing‐incidence scattering measurements of an immobile mechanically completely decoupled liquid sample, providing high mechanical stability. The available energy range is from 6.4 to 29.4 keV, covering many important absorption edges. The instrument provides access in momentum space out to 2.54 Å^?1 in the surface normal and out to 14.8 Å^?1 in the in‐plane direction at 29.4 keV. Owing to its modular design the diffractometer is also suitable for heavy apparatus such as vacuum chambers. The instrument performance is described and examples of X‐ray reflectivity studies performed under in situ electrochemical control and on biochemical model systems are given.     

Investigation of adhesive–dentin interfaces using Raman microspectroscopy and small angle X‐ray scattering

Human dentin specimens were treated with two different etch‐and‐rinse adhesives, Single Bond 2 (SB2) and Prime & Bond NT (PBNT), and two composite resins, TPH and P60. Cross‐sectional samples, approximately 1 mm thick, were analyzed with Raman line mapping and imaging across the dentin–adhesive–composite interface. The integrated intensities of selected bands associated with adhesive, organic material, composite and hydroxyapatite of dentin were calculated to determine the distribution of adhesive infiltration into demineralized dentin. The results were compared with the enamel‐adhesive composite interface. The demineralized zone was smaller in the enamel‐adhesive interface than in the dentin–adhesive interface. The region of collagen‐adhesive crosslinking was wider in the PBNT adhesive than in the SB2 adhesive. However, a gap at the dentin–PBNT composite interface, which was not observed at the dentin–SB2 composite interface, might compromise the dentin–restoration bond. K‐means cluster analysis of the Raman images confirmed the findings. The ultrastructure of the dentin–resin interface was studied using scanning electron microscopy. Small‐angle X‐ray scattering was also applied to reveal and quantify fine‐scale structural features. SB2 adhesive was found to diffuse more into demineralized dentin along with greater nanosized aggregations in the hybrid layer. Copyright © 2011 John Wiley & Sons, Ltd.     

Thorough small‐angle X‐ray scattering analysis of the instability of liquid micro‐jets in air

Liquid jets are of interest, both for their industrial relevance and for scientific applications (more important, in particular for X‐rays, after the advent of free‐electron lasers that require liquid jets as sample carrier). Instability mechanisms have been described theoretically and by numerical simulation, but confirmed by few experimental techniques. In fact, these are mainly based on cameras, which is limited by the imaging resolution, and on light scattering, which is hindered by absorption, reflection, Mie scattering and multiple scattering due to complex air/liquid interfaces during jet break‐up. In this communication it is demonstrated that synchrotron small‐angle X‐ray scattering (SAXS) can give quantitative information on liquid jet dynamics at the nanoscale, by detecting time‐dependent morphology and break‐up length. Jets ejected from circular tubes of different diameters (100–450 µm) and speeds (0.7–21 m s^?1) have been explored to cover the Rayleigh and first wind‐induced regimes. Various solvents (water, ethanol, 2‐propanol) and their mixtures have been examined. The determination of the liquid jet behaviour becomes essential, as it provides background data in subsequent studies of chemical and biological reactions using SAXS or X‐ray diffraction based on synchrotron radiation and free‐electron lasers.     

X‐ray tube spectral measurement method for quantitative analysis of X‐ray fluorescence analysis

Lα and Lβ X‐ray fluorescence spectra of a lead metallic sheet were measured using an energy dispersive X‐ray spectrometer by changing the X‐ray tube voltage and the material of the primary filter. The Lα to Lβ intensity ratio changed from Lα: Lβ = 3: 1 at 15 kV to Lα: Lβ = 1: 1 at 50 kV depending on the X‐ray tube voltage and the filter. The scattered X‐ray spectra of an acrylic slab instead of the sample in the sample holder were measured by changing the applied voltage and the material of the primary filter. The calculated values of the Pb Lα/Lβ intensity ratio of the metallic sheet using the Shiraiwa–Fujino formula by inserting the scattered X‐ray spectra of an acrylic plate as incident X‐ray spectra and the fundamental parameters taken from the Elam database were in good agreement with the experimental ones. We conclude that we can obtain an incident X‐ray spectrum approximately by measuring the scattered X‐ray spectrum without measuring the direct incident beam. Copyright © 2010 John Wiley & Sons, Ltd.     

Characterization of ashes from greenhouse crops plant biomass residues using X‐ray fluorescence analysis and X‐ray diffraction

A characterization of ashes obtained by thermal treatments on greenhouse crops plant biomass residues is presented. The chemical analysis, by X‐ray fluorescence (wavelength‐dispersive X‐ray fluorescence), and phase analysis, by X‐ray diffraction, of the resultant ashes are reported. Thermal treatments of selected samples of these residues increase the relative amounts of inorganic Mg, Si, P, and S in the ashes, being these amounts as high as increasing temperature. As an opposite effect, Na, Cl, and K contents decrease as increasing temperature by a volatilization process of the chlorides, as confirmed by X‐ray diffraction. The crystalline phase analysis of the ashes demonstrates the formation of inorganic constituents of the biomass, including alkaline chlorides and calcium salts (calcite, anhydrite, and apatite). Progressive thermal treatments induce the formation of new silicate phases (akermanite and grossularite) and silica (α‐quartz and cristobalite). Furthermore, the particle size of the starting biomass samples does not influence the evolution of the crystalline phases by thermal treatments. In contrast, a previous leaching using water and subsequent heating at 1,000 °C produces the formation of periclase (MgO), lime (CaO), and the silicate gehlenite, without the presence of anhydrite. This study is interesting for future investigations on the residues as a profitable biomass source for energy production and sustainable large‐scale management. Some potential applications of the resultant ashes can be proposed.     

Combined measurement of X‐ray photon correlation spectroscopy and diffracted X‐ray tracking using pink beam X‐rays

Combined X‐ray photon correlation spectroscopy (XPCS) and diffracted X‐ray tracking (DXT) measurements of carbon‐black nanocrystals embedded in styrene–butadiene rubber were performed. From the intensity fluctuation of speckle patterns in a small‐angle scattering region (XPCS), dynamical information relating to the translational motion can be obtained, and the rotational motion is observed through the changes in the positions of DXT diffraction spots. Graphitized carbon‐black nanocrystals in unvulcanized styrene–butadiene rubber showed an apparent discrepancy between their translational and rotational motions; this result seems to support a stress‐relaxation model for the origin of super‐diffusive particle motion that is widely observed in nanocolloidal systems. Combined measurements using these two techniques will give new insights into nanoscopic dynamics, and will be useful as a microrheology technique.     

Combined X‐ray diffraction and alpha particle X‐ray spectrometer analysis of geologic materials

The shallow interrogation depth of the lightest elements (Na, Mg, Al, and Si) detected by the particle‐induced X‐ray emission branch of the Curiosity Rover's alpha particle X‐ray spectrometer suggests that the X‐rays of these elements very likely emerge from a single mineral grain. This reality violates the assumption of atomic homogeneity at the micron scale made in both existing spectrum‐reduction approaches for the alpha particle X‐ray spectrometer. Consequently, analytical results for these elements in igneous geochemical reference materials exhibit deviations from certified concentrations in a manner that can be related to the total alkali‐silica diagram. A computer code is introduced here to provide quantitative prediction of these deviations using the mineral abundances determined from X‐ray diffraction. The latter are converted to area coverage fractions to represent the sample surface, and a fundamental parameters computation predicts the elemental X‐ray yields from each mineral and sums these. In this process, the chemistry of each individual mineral has to be varied by an iterative simplex approach; X‐ray yields are computed and compared with the peak areas from the fit of the bulk sample. When the difference between mineral yields and peak areas for each element are minimized, the mineral formulae are set and elemental X‐ray yields provided. The ratio between the summed mineral X‐ray yields and the corresponding yields based on the homogeneity assumption may then be compared directly with the concentration deviations measured in our earlier work. For several rock types, good agreement is found, thereby consolidating our understanding of the effects of sample mineralogy on alpha particle X‐ray spectrometer results. Copyright © 2017 John Wiley & Sons, Ltd.     

Glass‐bead/X‐ray fluorescence analysis of earthenware body – sampling from heterogeneous earthenware

Samples of ancient earthenware were prepared in 1 : 10 glass beads for the X‐ray fluorescence quantitation of 10 major elements (Na, Mg, Al, Si, P, K, Ca, Ti, Mn, and Fe). Calibration standards of the glass beads were used with a mixture of reagents in an arbitrary ratio instead of rock standards. The calibration curves were constructed using the reported values of Japanese wares and clay materials. The adequacy of conventional sampling methods was statistically evaluated by examining the homogeneities of two shards (112 g of Jomon ware and 92 g of Yayoi ware) with respect to their crystalline phases and 10 major constituents. Both shards were found to be heterogeneous. An important finding is that in the sampling from a shard, unless at least half of the shard is homogenized, small sampling cannot represent the whole shard. The sampling was found to be only marginally reliable because the K/Ca scatter diagram for determination of provenance showed regional characteristics, and the measured analytical values showed normal (or Gaussian) distributions. Furthermore, taking eight samples or above from a shard enhances the reliability of small sampling. Copyright © 2011 John Wiley & Sons, Ltd.     

Pressure study of monoclinic ReO2 up to 1.2 GPa using X‐ray absorption spectroscopy and X‐ray diffraction

The crystal and local atomic structure of monoclinic ReO₂ (α‐ReO₂) under hydrostatic pressure up to 1.2 GPa was investigated for the first time using both X‐ray absorption spectroscopy and high‐resolution synchrotron X‐ray powder diffraction and a home‐built B₄C anvil pressure cell developed for this purpose. Extended X‐ray absorption fine‐structure (EXAFS) data analysis at pressures from ambient up to 1.2 GPa indicates that there are two distinct Re—Re distances and a distorted ReO₆ octahedron in the α‐ReO₂ structure. X‐ray diffraction analysis at ambient pressure revealed an unambiguous solution for the crystal structure of the α‐phase, demonstrating a modulation of the Re—Re distances. The relatively small portion of the diffraction pattern accessed in the pressure‐dependent measurements does not allow for a detailed study of the crystal structure of α‐ReO₂ under pressure. Nonetheless, a shift and reduction in the (011) Bragg peak intensity between 0.4 and 1.2 GPa is observed, with correlation to a decrease in Re—Re distance modulation, as confirmed by EXAFS analysis in the same pressure range. This behavior reveals that α‐ReO₂ is a possible inner pressure gauge for future experiments up to 1.2 GPa.     

In situ multi‐axial loading frame to probe elastomers using X‐ray scattering

An in situ tensile–shear loading device has been designed to study elastomer crystallization using synchrotron X‐ray scattering at the Synchrotron Soleil on the DiffAbs beamline. Elastomer tape specimens of thickness 2 mm can be elongated by up to 500% in the longitudinal direction and sheared by up to 200% in the transverse direction. The device is fully automated and plugged into the TANGO control system of the beamline allowing synchronization between acquisition and loading sequences. Experimental results revealing the evolution of crystallization peaks under load are presented for several tension/shear loading sequences.     

Microfluidic sample preparation for elemental analysis in liquid samples using micro X‐ray fluorescence spectrometry

The integration of microfluidic devices with micro X‐ray fluorescence (micro‐XRF) spectrometry offers a new approach for the direct characterization of liquid materials. A sample presentation method based on use of small volumes (<5 µl) of liquid contained in an XRF‐compatible device has been developed. In this feasibility study, a prototype chip was constructed, and its suitability for XRF analysis of liquids was evaluated, along with that of a commercially produced microfluidic device. Each of the chips had an analytical chamber which contained approximately 1 µl of sample when the device was filled using a pipette. The performance of the chips was assessed using micro‐XRF and high resolution monochromatic wavelength dispersive X‐ray fluorescence, a method that provides highly selective and sensitive detection of actinides. The intended application of the device developed in this study is for measurement of Pu in spent nuclear fuel. Aqueous solutions and a synthetic spent fuel matrix were used to evaluate the devices. Sr, which has its Kα line energy close to the Pu Lα line at 14.2 keV, was utilized as a surrogate for Pu because of reduced handling risks. Between and within chip repeatability were studied, along with linearity of response and accuracy. The limit of detection for Sr determination in the chip is estimated at 5 ng/µl (ppm). This work demonstrates the applicability of microfluidic sample preparation to liquid characterization by XRF, and provides a basis for further development of this approach for elemental analysis within a range of sample types. Copyright © 2014 John Wiley & Sons, Ltd.     

A 2 m inelastic X‐ray scattering spectrometer at CMC‐XOR,Advanced Photon Source

The design and commissioning of an inelastic X‐ray scattering instrument at CMC‐XOR at the Advanced Photon Source is reported. The instrument features a 2 m vertical‐scattering arm with a novel counterweight design to reduce the twisting moment as the arm is moved in the scattering plane. A Ge(733) spherical analyzer was fabricated and an overall resolution of 118 meV (FWHM) was obtained with a Si(444) monochromator and a Si(111) pre‐monochromator. Early results from a representative cuprate, La₂CuO₄, are reported.     

Simultaneous small‐ and wide‐angle scattering at high X‐ray energies

Combined small‐ and wide‐angle X‐ray scattering (SAXS/WAXS) is a powerful technique for the study of materials at length scales ranging from atomic/molecular sizes (a few angstroms) to the mesoscopic regime (～1 nm to ～1 µm). A set‐up to apply this technique at high X‐ray energies (E > 50 keV) has been developed. Hard X‐rays permit the execution of at least three classes of investigations that are significantly more difficult to perform at standard X‐ray energies (8–20 keV): (i) in situ strain analysis revealing anisotropic strain behaviour both at the atomic (WAXS) as well as at the mesoscopic (SAXS) length scales, (ii) acquisition of WAXS patterns to very large q (>20 Å^?1) thus allowing atomic pair distribution function analysis (SAXS/PDF) of micro‐ and nano‐structured materials, and (iii) utilization of complex sample environments involving thick X‐ray windows and/or samples that can be penetrated only by high‐energy X‐rays. Using the reported set‐up a time resolution of approximately two seconds was demonstrated. It is planned to further improve this time resolution in the near future.     

A high‐resolution X‐ray fluorescence spectrometer and its application at SSRF

A high‐resolution X‐ray fluorescence spectrometer based on Rowland circle geometry was developed and installed at BL14W1 XAFS beamline of Shanghai Synchrotron Radiation Facility. The spectrometer mainly consists of three parts: a sample holder, a spherically curved Si crystal, and an avalanche photodiode detector. The simplicity of the spectrometer makes it easily assembled on the general purpose X‐ray absorption beamline. X‐ray emission spectroscopy and high‐resolution X‐ray absorption near edge spectroscopy can be carried out by using this spectrometer. X‐ray emission preliminary results with high‐resolution about 3 eV of Mn compounds were obtained, which confirmed the feasibility of the spectrometer. The application about Eu (III) retention on manganese dioxide was also studied using this spectrometer. Compared with conventional X‐ray absorption fine structure spectroscopy technique, the fluorescence peak of probed element [Eu (III) Lα] and matrix constituents (Mn Kα) were discriminated using this technique, indicating its superiority in fluorescence detection. Copyright © 2013 John Wiley & Sons, Ltd.     

Integrating 3D images using laboratory‐based micro X‐ray computed tomography and confocal X‐ray fluorescence techniques

The application of non‐destructive imaging to characterizing samples has become more important as the costs of samples increase. Imaging a sample via X‐ray techniques is preferable when altering or even touching the sample affects its properties, or when the sample is fielded after characterization. Two laboratory‐based X‐ray techniques used at Los Alamos include micro X‐ray computed tomography (MXCT) and confocal micro X‐ray fluorescence (confocal MXRF). Both methods create a 3D rendering of the sample non‐destructively. MXCT produces a high‐resolution (sub‐µm voxel) rendering of the sample based upon X‐ray absorption; the resulting model is a function of density and does not contain any elemental information. Confocal MXRF produces an elementally specific 3D rendering of the sample, but at a lower (30 × 30 × 65 µm) resolution. By combining data from these two techniques, scientists provided a more comprehensive method of analysis. We will describe a MATLAB routine written to render each of these data sets individually and/or within the same coordinate system. This approach is shown in the analysis of two samples: an integrated circuit surface mounted resistor and a machined piece of polystyrene foam. The samples chosen provide an opportunity to compare and contrast the two X‐ray techniques, identify their weaknesses and show how they are used in a complementary fashion. Copyright © 2010 John Wiley & Sons, Ltd.     

A new small‐angle X‐ray scattering set‐up on the crystallography beamline I711 at MAX‐lab

A small‐angle X‐ray scattering (SAXS) set‐up has recently been developed at beamline I711 at the MAX II storage ring in Lund (Sweden). An overview of the required modifications is presented here together with a number of application examples. The accessible q range in a SAXS experiment is 0.009–0.3 Å^?1 for the standard set‐up but depends on the sample‐to‐detector distance, detector offset, beamstop size and wavelength. The SAXS camera has been designed to have a low background and has three collinear slit sets for collimating the incident beam. The standard beam size is about 0.37 mm × 0.37 mm (full width at half‐maximum) at the sample position, with a flux of 4 × 10¹⁰ photons s^?1 and λ = 1.1 Å. The vacuum is of the order of 0.05 mbar in the unbroken beam path from the first slits until the exit window in front of the detector. A large sample chamber with a number of lead‐throughs allows different sample environments to be mounted. This station is used for measurements on weakly scattering proteins in solutions and also for colloids, polymers and other nanoscale structures. A special application supported by the beamline is the effort to establish a micro‐fluidic sample environment for structural analysis of samples that are only available in limited quantities. Overall, this work demonstrates how a cost‐effective SAXS station can be constructed on a multipurpose beamline.     

Soft X‐ray absorption spectroscopy and resonant inelastic X‐ray scattering spectroscopy below 100 eV: probing first‐row transition‐metal M‐edges in chemical complexes

X‐ray absorption and scattering spectroscopies involving the 3d transition‐metal K‐ and L‐edges have a long history in studying inorganic and bioinorganic molecules. However, there have been very few studies using the M‐edges, which are below 100 eV. Synchrotron‐based X‐ray sources can have higher energy resolution at M‐edges. M‐edge X‐ray absorption spectroscopy (XAS) and resonant inelastic X‐ray scattering (RIXS) could therefore provide complementary information to K‐ and L‐edge spectroscopies. In this study, M_2,3‐edge XAS on several Co, Ni and Cu complexes are measured and their spectral information, such as chemical shifts and covalency effects, are analyzed and discussed. In addition, M_2,3‐edge RIXS on NiO, NiF₂ and two other covalent complexes have been performed and different d–d transition patterns have been observed. Although still preliminary, this work on 3d metal complexes demonstrates the potential to use M‐edge XAS and RIXS on more complicated 3d metal complexes in the future. The potential for using high‐sensitivity and high‐resolution superconducting tunnel junction X‐ray detectors below 100 eV is also illustrated and discussed.     

A miniature closed‐circle flow cell for high photon flux X‐ray scattering experiments

A closed‐circle miniature flow cell for high X‐ray photon flux experiments on radiation‐sensitive liquid samples is presented. The compact cell is made from highly inert material and the flow is induced by a rotating magnetic stir bar, which acts as a centrifugal pump inside the cell. The cell is ideal for radiation‐sensitive yet precious or hazardous liquid samples, such as concentrated acids or bases. As a demonstration of the cell's capabilities, X‐ray Raman scattering spectroscopy data on the oxygen K‐edge of liquid water under ambient conditions are presented.     

A multiplexed high‐resolution imaging spectrometer for resonant inelastic soft X‐ray scattering spectroscopy

The optical design of a two‐dimensional imaging soft X‐ray spectrometer is described. A monochromator will produce a dispersed spectrum in a narrow vertical illuminated stripe (～2 µm wide by ～2 mm tall) on a sample. The spectrometer will use inelastically scattered X‐rays to image the extended field on the sample in the incident photon energy direction (vertical), resolving the incident photon energy. At the same time it will image and disperse the scattered photons in the orthogonal (horizontal) direction, resolving the scattered photon energy. The principal challenge is to design a system that images from the flat‐field illumination of the sample to the flat field of the detector and to achieve sufficiently high spectral resolution. This spectrometer provides a completely parallel resonant inelastic X‐ray scattering measurement at high spectral resolution (～30000) over the energy bandwidth (～5 eV) of a soft X‐ray absorption resonance.