Mechanochemical Synthesis and Characterization of Alkaline Earth Metal Terephthalates: M(C8H4O4)·nH2O (M = Ca,Sr, Ba)

The mechanochemical synthesis offers an easy access to obtain alkaline earth metal terephthalates M(C₈H₄O₄) · nH₂O (M = Ca, Sr, Ba). In the presented study we describe for the first time the mechanochemical synthesis of powders of Ca(C₈H₄O₄) · 3H₂O, Ca(C₈H₄O₄), Sr(C₈H₄O₄) · H₂O, and Ba(C₈H₄O₄), which so far were only synthesized as single crystals from aqueous solutions or by reactions in an autoclave. Furthermore, a new hydrate Ba(C₈H₄O₄) · 2(1.5)H₂O, not described so far in the literature, was prepared. All compounds were characterized by X‐ray powder diffraction, thermal analysis, elemental analysis, FT‐IR, and MAS NMR spectroscopic measurements.     

Barium coordination polymers based on fluorinated and fluorine-free benzene-dicarboxylates: Mechanochemical synthesis and spectroscopic characterization

A series of new Ba-based coordination polymers (CPs) were mechanochemically synthesized by milling Ba-hydroxide samples with perfluorinated and fluorine-free benzene-dicarboxylic acids, including tetrafluoroisophthalic acid (H₂mBDC-F₄), tetrafluorophthalic acid (H₂oBDC-F₄), isophthalic acid (H₂mBDC) and phthalic acid (H₂oBDC). The new fluorinated CPs: [Ba(mBDC-F₄)·0.5H₂O] (1) and [Ba(oBDC-F₄)·1.5H₂O] (2) are compared to their nonfluorinated counterparts: [Ba(mBDC)·2.5H₂O] (3), and [Ba(oBDC)·1H₂O] (4). These materials are thoroughly characterized using powder X-ray diffraction. The products obtained by milling are all hydrated but vary in their water contents. Compositions and local structures are investigated by elemental analysis, thermal analysis, MAS NMR and attenuated total reflection-infrared spectroscopy. These materials exhibit high thermal stabilities but small surface areas that remain unchanged even after thermal treatments.     

Mechanochemical synthesis of strontium britholites: Reaction mechanism

The britholites have gained a great interest thanks to their potential applications as matrices for the confinement of the byproducts in the nuclear industry such as minor actinides and long-lived fission products. However, the preparation of britholites requires high temperatures, above 1200 °C. In this work, we strive to prepare these kinds of compounds by a mechanochemical synthesis at room temperature from the starting materials SrF₂, SrCO₃, Sr₂P₂O₇, La₂O₃ and SiO₂ using a planetary ball mill. The obtained results showed that the prepared products were carbonated apatites and the corresponding powders contained some unreacted silica and lanthana. To obtain pure britholites, a heat-treatment at 1100 °C was required. The mechanism involved in the different steps of the reaction is discussed in this paper. The obtained results suggest that the use of raw materials containing no carbonate is expected to directly lead to pure britholites by appropriate milling at room temperature.     

The crystal structure of the interrupted framework silicate K9.6Ca1.2Si12O30 determined from laboratory X-ray diffraction data

The crystal structure of a potassium calcium silicate with composition K_9.6Ca_1.2Si₁₂O₃₀ (or K₈CaSi₁₀O₂₅) has been solved by direct methods aided by distance least squares optimization from laboratory X-ray powder diffraction data. The trigonal compound adopts the non-centrosymmetric space group R3c with the following basic crystallographic data: a=11.13623(5) Å, c=21.9890(2) Å, V=2361.63(2) Å³, Z=3, D_calc=2.617 g cm⁻³. The crystal structure can be classified as an interrupted framework with exclusively Q³-units. It can be thought of as being built from layers parallel to (001) containing isolated six-membered tetrahedral rings in UDUDUD conformation. Corner sharing of tetrahedra belonging to adjacent sheets results in a tetrahedral framework. The framework density of the structure is 15.2 T-atoms/1000 Å³. The coordination sequences are identical for both silicon atoms in the asymmetric unit: 3-6-11-20-32-46-60-80-102-122. The vertex symbols for the two tetrahedral centers are 10₂·10₂·6₁. Topologically, the structure can be described as an Archimedean three-dimensional 3-connected net. It can be derived from the diamond or cristobalite net by removing 20% of the knots. Charge compensation in the structure is achieved by the incorporation of mono- and divalent M-cations (M: K, Ca). These extra-framework ions are coordinated by six to nine oxygen ligands. Ca/K distributions for the five symmetrically independent M-sites were obtained from a combination of bond distance considerations, site occupancy refinements and the bulk chemical composition. The structural characterization is completed by a detailed Raman spectroscopic study. Furthermore, possible implications of the structural chemistry of interrupted framework silicates for the field of silicate glass research are addressed.     

铁酸锌纳米晶的机械化学合成

以αFe₂O₃和ZnO粉体为原料,在高能球磨的作用下,室温(约25℃)合成了铁酸锌(ZnFe₂O₄)纳米晶.用XRD、TEM、M?sbauer谱及IR光谱等方法对纳米晶进行了表征.结果表明:所得纳米晶具有非正型分布的尖晶石结构,为超顺磁性;纳米晶内存在着较多的缺陷.     

Solvent-Free Mechanochemical Synthesis of Aryl Glycosides[ 1 ]

Aryl glycosides have been prepared from a range of readily available glycosyl halides by a solvent-free mechanochemical procedure employing a planetary ball mill in excellent yields. Besides being a solvent-free reaction, the procedure has been successful in eliminating the need for employing any phase-transfer catalyst in the reaction.     

Synthesis and spectroscopic studies of isosteviol-calix[4]arene and -calix[6]arene conjugates

Novel calix[4]arene derivatives functionalized with two or four isosteviol units at the upper rim and a new calix[6]arene having six isosteviol moieties at the lower rim have been synthesized. The structures of these compounds have been confirmed by NMR and mass spectrometry data. All ¹H and ¹³C NMR chemical shifts of isosteviol were fully assigned by extensive NMR spectroscopic methods, and used to clarify the structures and conformations of isosteviol-calixarene conjugates.     

Synthesis of new o-alkyl substituted arylalkylphosphanes: study of their molecular structure and influence on rhodium-catalyzed propene and 1-hexene hydroformylation

A set of new phosphane ligands designed to increase the branched-to-normal ratio of the hydroformylation reaction were prepared in the same way as the previously reported ortho-alkyl substituted arylphosphanes, which have shown increased i/n ratios in the hydroformylation of propene and 1-hexene. In order to determine the relationship between the catalytic behavior and stereoelectronic properties of the ligands, various functional alkyl groups (methyl, isopropyl, cyclohexyl) were placed on the phosphorus atom directly and in the ortho position of the phenyl ring connected to phosphorus. In the hydroformylation reaction of propene and 1-hexene a higher i/n ratio resulted with nearly all the ligands compared with that of triphenylphosphane. Additionally as the ortho-alkyl-substituent became larger, it had a favorable effect on the i-selectivity. Characterization of the ligands was carried out by NMR spectroscopy (mainly ¹H, ³¹P{¹H}, ¹³C{¹H}, HSQC/HETCOR and COSY-90). Properties of the ligands were also studied by quantum mechanical calculations and by synthesizing three Rh(acac)(CO)(PR₃) derivatives. The o-alkyl-substituent was orientated outside the ligands’ cone angle in the X-ray crystal structures of (2-cyclohexylphenyl)dicyclohexylphosphane and (2,5-dimethylphenyl)bis(4-pyridyl)phosphane, and Rh(acac)(CO)(PR₃) complex of (2-methylphenyl)dicyclohexylphosphane.     

Synthesis and molecular structure of the novel monohydrated 3-p-nitrophenylpyrazole derived from 1,3-diketone malonate

The synthesis of dimethyl {2-[3-(4-nitrophenyl)-1H-pyrazol-5-yl]ethyl}malonate monohydrate 1, C₁₆H₁₇N₃O₆·H₂O was performed and the molecular structure has been studied by using NMR, single crystal X-ray diffraction and ab initio calculations. The title compound presents a pyrazole ring (N1 to C5), a phenyl ring (C1″ to C6″) attached to C3 and the ethylene dimethyl malonate frame (C1′ to C7′) attached to C5. The torsion angle defined by N2C3C1″C2″ (−12.26°) showed that pyrazole and phenyl rings are not in the same plane. Monohydration in (1) is present in the structure by a NHOH₂ hydrogen bonding, with a bond length of 1.782 Å. Experimental and theoretical evidences indicated the preference of the 3-tautomer over the corresponding 5-tautomer in the titled pyrazole.     

Mechanochemical synthesis,structure and properties of lead containing alkaline earth metal fluoride solid solutions MxPb1-xF2 (M = Ca,Sr, Ba)

The paper deals with the mechanochemical synthesis of lead containing alkaline earth metal fluoride solid solutions M_xPb_1-xF₂ (M = Ca, Sr, Ba) by high-energy ball milling. Several metal precursors and fluorinating agents were tested for synthesizing M_0.5Pb_0.5F₂. Metal acetates and ammonium fluoride as precursors show the most promising results and were therefore used for the formation of M_xPb_1-xF₂ with different metal cationic ratios. The characterization of the local fluorine coordination and the crystal structure was performed by ¹⁹F MAS NMR spectroscopy and X-ray diffraction. Additional calculations of ¹⁹F chemical shifts using the superposition model allow a deeper insight into the local structure of the compounds. The fluoride ion conductivity was followed by temperature dependent DC conductivity measurements. Significantly higher conductivities were found in comparison with those of the corresponding binary fluorides. The highest values were observed for samples with high lead content M_0.25Pb_0.75F₂, bearing in mind the much higher conductivity of PbF₂ compared to MF₂.     

Crystal Structure and Spectroscopic Studies of a New Organic Dihydrogenmonophosphate [2-NH2-6-CH3-C4H3N2O]2(H2PO4)2

Physicochemical properties of a new dihydrogenmonophosphate [2-NH ₂ -6-CH ₃ -C ₄ H ₃ N ₂ O] ₂ (H ₂ PO ₄ ) ₂ are described on the basis of X-ray crystal structure investigation. This compound crystallizes in the triclinic space group P-1. The unit cell parameters are: a = 7.667(3) Å, b = 8.204(5) Å, c = 14.761(6) Å, α = 98.85(4)°, β = 99.23(3)°, γ = 90.50(4)°, V = 905.0 ų, and Z = 2. The crystal structure was solved and refined to R = 0.037, using 4351 independent reflections. The atomic arrangement of this compound is built up by (H ₂ PO ₄ ) _n ^{n ?} chains. Each chain aggregates with organic molecules to form an open framework architecture through hydrogen bond interactions. The structure includes four types of hydrogen bonds. The first one, O─H─O, links the H ₂ PO ₄ groups to form (H ₂ PO ₄ ) _n ^{n ?} infinite inorganic chains parallel to the a axis. The three other types, O─H─O(carbonylic), N─H─O(carbonylic), and N─H─O, assemble the inorganic chains so as to build up a three-dimensional arrangement. This compound has also been investigated by IR, and solid-state ¹³ C and ³¹ P MAS NMR spectroscopies combined to ab initio calculations.     

Synthesis and Characterization of Spinel‐Type Gallia‐Alumina Solid Solutions

By precipitation with ammonia of ethanolic solutions containing the appropriate proportions of gallium and aluminium nitrate, following by calcination of the resulting gels at 773 K, mixed Ga₂O₃/Al₂O₃ oxides having Ga:Al ratios of 9:1, 4:1, 1:1, 1:4 and 1:9 were obtained. Powder X‐ray diffraction showed that these mixed metal oxides form a series of solid solutions having the spinel‐type structure; also shown by γ‐Al₂O₃ and γ‐Ga₂O₃. The specific surface area (determined by nitrogen adsorption at 77 K) was found to range from 160 m² g^?1 for the mixed oxide having Ga:Al = 9:1 up to 370 m² g^?1 for that having Ga:Al = 1:9. High resolution MAS NMR showed that Ga³⁺ and Al³⁺ ions occur at both tetrahedral and octahedral sites in the spinel‐type structure of the mixed metal oxides, although there is a preferential occupation of tetrahedral sites by Ga³⁺ ions. A proportion of penta‐coordinated Al³⁺ ions was also found. IR spectra of carbon monoxide adsorbed at 77 K showed that the mixed metal oxides have a considerable Lewis acidity, related mainly to tetrahedrally coordinated metal ions exposed at crystal surfaces. The characteristic infrared absorption band of coordinated (adsorbed) CO appears in the range 2205–2190 cm^?1, and its peak wavenumber is nearly independent of Ga:Al ratio in the mixed gallia‐alumina oxides.     

The Parent Hexacarbaborane arachno-C6B6H12 and a Methylated Pentacarbaborane arachno-CH3C5B7H12: Domains of Incipient Hydrocarbon Behavior within Borane Clusters

Increasingly pronounced hydrocarbon character is exhibited by C₆H₆B₁₂, the first unsubstituted hexacarbaborane, and CH₃C₅B₇H₁₂, the first cluster pentacarbaborane. These compounds shed light on the structural dichotomy between open hydrocarbon skeletons and polyhedral borane frameworks for high-carbon carboranes.     

Reaction Mechanisms of Strontium Ferrites Synthesis

The reactions between strontium and iron nitrates have been studied in an open atmosphere system using three different molar ratios, 1:1 (I), 1:2 (II) and 2:1 (III) at different temperatures as pointed out from the DTA data. The reaction mechanism was discussed based on the chemical composition characterized by means of thermal analysis, X‐ray diffraction patterns, infrared spectra and magnetic susceptibility. It was found that the reaction products depend on both temperature of reaction and the ratio between reactants. The reaction products were found to be composed of a variety of iron compounds that possess different valences: SrFeO_2.86, SrFeO_2.97, SrFe₂O₄, SrFe₁₂O₁₉, Sr₂Fe₂O₅ and Sr₇Fe₁₀O₂₂ in addition to some accessory reaction products namely α‐Fe₂O₃ and FeO(OH).     

Synthesis and Characterization of a Bio-Based Resin from Linseed Oil

Summary: The use of renewable raw materials in the polymer industries is becoming increasingly popular because of environmental concerns and the need to substitute fossil resources. Plant oils with triglyceride backbones can be chemically modified and used to synthesize polymers from renewable resources (biopolymers). In the present study, linseed oil was epoxidized using a chemo-enzymatic method based on Candida Antarctica lipase B (CALB) as a biocatalyst and the modified linseed oil was cured using maleinated linseed oil and a commercial polyamide resin. The amount of epoxidation achieved depended on the amount of lipase used and was determined by infrared (IR) and nuclear magnetic resonance (NMR) spectroscopies. With 20% (weight per weight) catalyst concentration based on the wt % of oil a degree of epoxidation of > 90% was achieved. The cross-linking reaction of epoxidized linseed oil with the maleinated linseed oil and the polyamide resin was studied using differential scanning calorimetry (DSC). DSC traces showed that an increase in epoxidation degree lead to larger values for the exothermic enthalpy integrals of the curing reactions and hence to a higher reactivity of the linseed oil towards the cross-linking agents.     

Nanosized copper ferrite materials: Mechanochemical synthesis and characterization

Nanodimensional powders of cubic copper ferrite are synthesized by two-steps procedure of co-precipitation of copper and iron hydroxide carbonates, followed by mechanochemical treatment. X-ray powder diffraction, Mössbauer spectroscopy and temperature-programmed reduction are used for the characterization of the obtained materials. Their catalytic behavior is tested in methanol decomposition to hydrogen and CO and total oxidation of toluene. Formation of nanosized ferrite material is registered even after one hour of milling time. It is established that the prolonging of treatment procedure decreases the dispersion of the obtained product with the appearance of Fe₂O₃. It is demonstrated that the catalytic behavior of the samples depends not only on their initial phase composition, but on the concomitant ferrite phase transformations by the influence of the reaction medium.     

Dimesitylborane monomer-dimer equilibrium in solution, and the solid-state structure of the dimer by single crystal neutron and X-ray diffraction

Dimesitylborane dimer has been shown to exist in equilibrium with dimesitylborane monomer in solution. This equilibrium has been investigated by variable concentration and variable temperature multinuclear NMR spectroscopy and values for the dissociation constant, enthalpy and entropy of dissociation were found to be K_diss=(3.2±0.4)×10⁻³ M, ΔH=70 kJ mol⁻¹, and ΔS=212 J K⁻¹mol⁻¹, respectively. Ab initio methods have been used to investigate the gas-phase structures and energies of both monomer and dimer, and calculated ¹¹B-NMR shifts are also presented. The solid-state structure of dimesitylborane dimer has been investigated by single crystal X-ray diffraction at 100 K and the position of the bridging hydrogen atoms (B---H=1.340(2), 1.342(2) Å, H---B---H=92.46(14)°) has been determined accurately, for the first time, by single crystal neutron diffraction at 20 K.     

Synthesis and Structure Characterization of Piperazine-1,4-diium Triphosphate

[C ₄ N ₂ H ₁₂ ] ₂ HP ₃ O ₁₀ · H ₂ O, a new hydrate organic cation monohydrogeno-triphosphate, has been synthesized and characterized by X-ray diffraction, IR spectroscopy, mass angle spinning (MAS), NMR, and thermal analysis. The title compound crystallizes in a monoclinic unit cell with a = 11.072(5), b = 12.324(2), c = 13.122(5) Å, β = 93.85(5)°, Z = 4, V = 1787(1) Å ³ , and a noncentrosymmetric space group P2 ₁ (no. 4). Crystal structure is determined and refined to R = 0.057 using 4262 independent reflections. The atomic arrangement can be described as a typical layers organization. Layers built by HP ₃ O ₁₀ ^4? anions and water molecules are parallel to the (a, b) planes. Between these layers the piperazinium cations, which form hydrogen bonds with oxygen atoms of the triphosphate anion, are located.