A Copper‐Carboxylate Layer‐Framework with Pseudo‐­Kagomé Net

A two dimensional coordination polymer with pseudo‐Kagomé net [Cu₃(btc)₂(NH₃)₈(H₂O)] was prepared from Cu(NO₃)₂ · 3H₂O and 1, 3, 5‐benzenetricarboxylic acid (btc) in ammonia aqua solution and was structurally characterized by X‐ray diffraction. The magnetic susceptibility measurements, measured from 2 to 300 K, revealed a weak anti‐ferromagnetic interaction between the Cu^II ions via the btc ligands.     

The Coordination Chemistry of Iron with the 1,4‐Bis(2‐pyridyl‐methyl)piperazine Ligand

The behaviour of Fe^II and Fe^III ions in combination with the potential ligand 1,4‐bis(2‐pyridyl‐methyl)piperazine (BPMP) under anhydrous conditions has been investigated. BPMP has been reacted with FeCl₂, FeCl₃ and [Fe(OTf)₂(MeCN)₂]. This led to the isolation of four new complexes, which were fully characterized and structurally investigated by single crystal X‐ray diffraction. It turned out that in the presence of chloride co‐ligands Fe^III favours the tetradentate coordination mode of BPMP with the piperazine unit in a boat configuration, like for instance in [BPMP(Cl)Fe(μ‐O)FeCl₃] or [BPMP‐FeCl₂][FeCl₄], ( 1 ). However, the employment of FeCl₂ leads to the formation of a coordination polymer [BPMP‐FeCl₂]_n, ( 2 ), containing the piperazine ring in a chair configuration binding to two iron centres each. 2 can only be dissolved in very polar solvents like dmf which is capable of breaking up the polymeric structure under formation of [Cl₂(dmf)Fe(μ‐BPMP‐1κ²N,N:2κ²N,N))Fe(dmf)Cl₂]·2 dmf, ( 3 ). In contrast, using [Fe(OTf)₂(MeCN)₂] instead of FeCl₂ as the starting material leads to a mononuclear Fe^II complex with BPMP bound in the desirable tetradentate fashion: [BPMP‐Fe(OTf)₂], ( 4 ). Unlike other complexes with tetradentate N/py ligands the two residual ligands in 4 are bound almost trans to each other with the potential to adopt a cis orientation under oxidising conditions, and it will be interesting to exploit its catalytic properties in future.     

Poly­[[bis­(pyridine‐κN)copper(II)]‐μ3‐5‐hydroxy­isophthalato‐κ3O:O′:O′′]

In the title compound, [Cu(C₈H₄O₅)(C₅H₅N)₂]_n or [Cu(OH‐BDC)(py)₂]_n (where OH‐H₂BDC is 5‐hydroxy­isophthalic acid and py is pyridine), the Cu atoms are coordinated by two N atoms from the pyridine ligands and by three O atoms from hydroxy­isophthalate ligands in a highly distorted triangular bipyramidal environment, with Cu—O distances in the range 1.941 (4)–2.225 (5) Å and Cu—N distances of 2.014 (6) and 2.046 (6) Å. The [Cu(OH‐BDC)]_n two‐dimensional network is built up from interlocking 22‐, 15‐ and eight‐membered rings via sharing of Cu atoms and O—H⋯O hydrogen bonds. Consolidation of the packing structure is achieved by edge‐ or point‐to‐face C—H⋯π interactions and offset or slipped π–π stacking interactions.     

A new copper(II) supramolecular coordination polymer and a dinuclear compound with multifunctional 2‐amino‐5‐sulfobenzoic acid and flexible N‐donor ligands: synthesis,structure and characterization

Multifunctional 2‐amino‐5‐sulfobenzoic acid (H₂afsb) can exhibit a variety of roles during the construction of supramolecular coordination polymers. The pendant carboxylic acid, sulfonic acid and amino groups could not only play a role in directing bonding but could also have the potential to act as hydrogen‐bond donors and acceptors, resulting in extended high‐dimensional supramolecular networks. Two new Cu^II coordination compounds, namely catena‐poly[[[diaquacopper(II)]‐μ‐1,6‐bis(1H‐1,2,4‐triazol‐1‐yl)hexane‐κ²N⁴:N^4′] bis(3‐amino‐4‐carboxybenzenesulfonate) dihydrate], {[Cu(C₁₀H₁₆N₆)₂(H₂O)₂](C₇H₆NO₅S)₂·2H₂O}_n or {[Cu(bth)₂(H₂O)₂](Hafsb)₂·2H₂O}_n, (1), and bis(μ‐2‐amino‐5‐sulfonatobenzoato‐κ²O¹:O^1′)bis{μ‐1,2‐bis[(1H‐imidazol‐1‐yl)methyl]benzene‐κ²N³:N^3′}bis[aquacopper(II)] trihydrate, [Cu₂(C₇H₅NO₅S)₂(C₁₄H₁₄N₄)₂(H₂O)₂]·3H₂O or [Cu₂(afsb)₂(obix)₂(H₂O)₂]·3H₂O, (2), have been obtained through the assembly between H₂afsb and the Cu^II ion in the presence of the flexible N‐donor ligands 1,6‐bis(1H‐1,2,4‐triazol‐1‐yl)hexane (bth) and 1,2‐bis[(1H‐1,2,4‐triazol‐1‐yl)methyl]benzene (obix), respectively. Compound (1) consists of a cationic coordination polymeric chain and 3‐amino‐4‐carboxybenzenesulfonate (Hafsb⁻) anions. Compound (2) exhibits an asymmetric dinuclear structure. There are hydrogen‐bonded networks within the lattices of (1) and (2). Interestingly, both (1) and (2) exhibit reversible dehydration–rehydration behaviour.     

Thermal Cleavage of Cyclobutane Rings in Photodimerized Coordination‐Polymeric Sheets

Three coordination polymers, [Cd₂(pvba)₂(tbdc)(dmf)₂] ( 1 ), [Co₂(pvba)₂(tbdc)(dmf)₂(H₂O)₂] ( 2 ), and [Ni₂(pvba)₂(tbdc)(dmf)₂(H₂O)₂] ( 3 ) (H₂tbdc=2,3,5,6‐tetrabromobenzenedicarboxylic acid, Hpvba=trans‐2‐(4′‐pyridyl)vinylbenzoic acid), were synthesized by solvothermal methods. The solid‐state structures of compounds 1 and 2 were determined by X‐ray crystallography. In compounds 1 and 2 , the bimetallic cores acted as secondary building units that connected the tbdc ligands in one direction and a pair of pvba ligands, which were aligned in a head‐to‐tail parallel manner, in the orthogonal direction to form sheet structures. The C?C bonds in these pvba ligand pairs in all three compounds were well‐aligned to undergo quantitative [2+2] cycloaddition reactions in the solid state under UV irradiation, thereby yielding their cyclobutane derivatives. This photochemical reaction appeared to facilitate structural transformations from one 2D structure into another in the solid state. The photoreactive Co^II‐ and Ni^II coordination polymers exhibited a reversible dehydration–rehydration reaction that was accompanied by color changes from pink to purple and green to yellow, respectively, owing to a change in coordination number from six to five. Magnetic studies showed that compound 2 was an antiferromagnet, which displayed a field‐dependent transition with a critical field (H_c) of 40 kOe at 2 K; the antiferromagnetic interaction between the Co₂ units was strengthened and weakened by dehydration and UV irradiation, respectively. The cyclobutane ligand in the photodimerized products was cleaved on heating to yield a mixture of trans‐ and cis‐isomers of pvba, as monitored by ¹H NMR spectroscopy. The Cd^II coordination polymer underwent quantitative cleavage of the cyclobutane ring whilst the other two underwent partial cleavage.     

Two‐Dimensional Divalent Metal Coordination Polymers Containing 3,4′‐Dipyridylketone Tethers: Layer Topology Tuning by Anion Binding Preferences

Slow diffusion of aqueous cobalt thiocyanate or cadmium perchlorate and ethanolic solutions of 3,4′‐dipyridylketone (3,4′‐dpk) generated the coordination polymers {[Co(NCS)₂(3,4′‐dpk)₂]·2H₂O}_n ( 1 ) and {[Cd(H₂O)₂(3,4′‐dpk)₂](ClO₄)₂·2H₂O}_n ( 2 ), which were structurally characterized by single‐crystal X‐ray diffraction. The structure of 1 consists of interdigitated neutral [Co(NCS)₂(3,4′‐dpk)₂]_n (4,4) rectangular grid coordination polymer layers. However, compound 2 manifests cationic [Cd(H₂O)₂(3,4′‐dpk)₂]_n²ⁿ⁺ two‐dimensional (6,3) herringbone lattices connected through hydrogen bonding mediated by interlamellar unligated perchlorate anions. Upon excitation with ultraviolet radiation, 2 emits blue‐violet light, ascribed to π–π* transitions within the pyridyl rings of the 3,4′‐dpk ligands. Thermal decomposition behavior of 1 is also discussed.     

catena‐Poly[hexaaquamagnesium(II) [bis(μ3‐5‐nitro‐2‐oxidoisophthalato)dicopper(II)] dihydrate]

In the centrosymmetric dinuclear anions of the title bimetallic complex, {[Mg(H₂O)₆][Cu₂(C₈H₂NO₇)₂]·2H₂O}_n, each Cu^II ion is strongly coordinated by four O atoms in a distorted square‐planar geometry. Two of these O atoms belong to phenolate groups and the other two to carboxylate groups from 5‐nitro‐2‐oxidoisophthalate (L1) trianions, derived from 5‐nitrobenzene‐1,2,3‐tricarboxylic acid (O₂N–H₃L). The phenolate O atoms bridge the two Cu^II ions in the anion. In addition, each Cu^II cation interacts weakly with a symmetry‐related carboxylate O atom of an adjacent L1 ligand, giving a square‐pyramidal coordination geometry. The copper residue forms a ladder‐like linear coordination polymer via L1 ligands. The [Mg(H₂O)₆]²⁺ cations sit on centres of inversion. The polymeric anions, cations and free water molecules are self‐assembled into a three‐dimensional supramolecular network via O—H...O hydrogen bonds.     

catena‐Poly[bis(μ‐2,2′‐bipyridin‐6‐olato)‐κ3N,N′:O;O:N,N′‐dicopper(I,II) [[tetrafluoridoniobium(V)]‐μ‐oxido]]

A novel copper–niobium oxyfluoride, {[Cu₂(C₁₀H₇N₂O)₂][NbOF₄]}_n, has been synthesized by a hydrothermal method and characterized by elemental analysis, EDS, IR, XPS and single‐crystal X‐ray diffraction. The structural unit consists of one C₂‐symmetric [NbOF₄]⁻ anion and one centrosymmetric coordinated [Cu₂(obpy)₂]⁺ cation (obpy is 2,2′‐bipyridin‐6‐olate). In the [NbOF₄]⁻ anion, each Nb^V metal centre is five‐coordinated by four F atoms and one O atom in the first coordination shell, forming a square‐pyramidal coordination geometry. These square pyramids are then further connected to each other via trans O atoms [Nb—O = 2.187 (3) Å], forming an infinite linear {[NbOF₄]⁻}_n polyanion. In the coordinated [Cu₂(obpy)₂]⁺ cation, the oxidation state of each Cu site is disordered, which is confirmed by the XPS results. The disordered Cu sites are coordinated by two N atoms and one O atom from two different obpy ligands. The [NbOF₄]⁻ and [Cu₂(obpy)₂]⁺ units are assembled via weak C—H...F hydrogen bonds, resulting in the formation of a three‐dimensional supramolecular structure. π–π stacking interactions between the pyridine rings [centroid–centroid distance = 3.610 (2) Å] may further stabilize the crystal structure.     

Syntheses,Structures, and Catalytic Properties of Three Copper(II) Coordination Polymers Based on 2,3,5,6‐Tetrafluoro‐1,4‐bis(triazole‐ylmethyl)benzene and Benzene Carboxylate Ligands

Three new mixed‐ligand coordination polymers of Cu^II, namely, [Cu(Fbtx)(L1)(H₂O)]_n ( 1 ), [Cu(Fbtx)_0.5(HL2)(H₂O)₂]_n ( 2 ), and {[Cu(Fbtx)_1.5(HL3)(H₂O)] · H₂O}_n ( 3 ) [Fbtx = 2,3,5,6‐tetrafluoro‐1,4‐bis(1,2,4‐triazole‐1‐ylmethyl)benenze, H₂L1 = terephthalic acid, H₃L2 = trimesic acid, NaH₂L3 = 5‐sulfoisophthalic acid monosodium salt], were hydrothermally synthesized and structurally characterized by elemental analysis, IR spectra, and single‐crystal and powder X‐ray diffraction techniques. All the complexes have a two‐dimensional (2D) coordination layer structure. Of these, 1 displays a planar 4⁴‐ sql structure whereas both 2 and 3 are highly undulated 6³‐ hcb nets. Moreover, their thermal stability and catalytic behaviors in the aerobic oxidation of 4‐methoxybenzyl alcohol were also investigated as well. The results indicate that the benzene dicarboxylate ligands have an effective influence on the structures and catalytic properties of the resulting coordination polymers.     

Six Coordination Polymers based on 4‐(1H‐Imidazol‐1‐yl)phthalic Acid: Structural Diversities,Magnetism and Luminescence Properties

The coordination polymers (CPs), [Ni(L)(H₂O)₄]_n ( 1 ), [Co(HL)₂(H₂O)₂]_n ( 2 ), {[Cu(L)(H₂O)₃] · H₂O}_n ( 3 ), [Mn(L)(H₂O)₂]_n ( 4 ), [Cd(L)(H₂O)₂]_n ( 5 ), and {[Zn₂(L)₂] · H₂O}_n ( 6 ), were solvothermally synthesized by employing the imidazol‐carboxyl bifunctional ligand 4‐(1H‐imidazol‐1‐yl) phthalic acid (H₂L). Single‐crystal X‐ray diffraction indicated that the L^2–/HL^– ligands display various coordination modes with different metal ions in 1 – 6 . Complexes 1 and 2 show one‐dimensional (1D) chain structures, whereas complexes 3 – 6 show 2D layered structures. The magnetic properties of these complexes were investigated. Complexes 1 and 3 indicate weak ferromagnetic interactions, whereas complexes 2 and 4 demonstrate antiferromagnetic interactions. In addition, luminescence properties of 5 and 6 were measured and studied in detail.     

Dipyridylamide Donor Disposition and Isophthalate Substituent Steric Effect on the Dimensionality and Topology of Divalent Copper Coordination Polymers

Divalent copper coordination polymers containing an isophthalate ligand and a dipyridylamide ligand show different dimensionalities and topologies depending on pyridyl nitrogen donor disposition and the steric bulk of the substituent on the dicarboxylate aromatic ring. According to single‐crystal X‐ray diffraction, [Cu(ip)(3‐pna)]_n ( 1 , ip = isophthalate, 3‐pna = 3‐pyridylnicotinamide) shows a (4, 4) layered grid structure based on {Cu₂(OCO)₂} dimeric units. {[Cu(ip)(3‐pina)]·H₂O}_n ( 2 , 3‐pina = 3‐pyridylisonicotinamide) exhibits similar dimeric units, but in contrast to 1 these are connected into a non‐interpenetrated 3D 6⁵8 cds network. Both [Cu(mip)(3‐pina)]_n ( 3 , mip = 5‐methylisophthalate) and [Cu(meoip)(3‐pina)]_n ( 4 , mip = 5‐methoxyisophthalate) display dimer‐based 4¹²6³ pcu networks in contrast to 2 . Use of 5‐hydroxyisophthalate (H₂hip) as a precursor afforded a mixture of {[Cu₂(hip)₂(3‐pina)₄]·9.5H₂O}_n ( 5 ) and [Cu(hip)(3‐pina)]_n ( 6 ). Compound 5 shows a 2D interdigitated structure with [Cu(hip)]_n coordination polymer layers featuring {Cu₂(OCO)₂} dimeric units and pendant 3‐pina ligands, while 6 also showed a dimer‐based 4¹²6³ pcu network. Use of the very sterically bulky 5‐tert‐butylisophthalate (tbip) ligand afforded the 1D chain coordination polymer {[Cu(tbip)(3‐pina)₂(H₂O)]·H₂O}_n ( 7 ), which contains isolated copper ions in contrast to 1 – 6 , and has a curious “butterfly“ resemblance. Very weak antiferromagnetic coupling is seen within the {Cu₂(OCO)₂} dimeric units in 1 . Thermal decomposition behavior is also discussed.     

Synthesis,Spectral and Magnetic Properties,and Crystal Structures of Copper(II) Pyridinecarboxylate Adducts with N‐Heterocyclic Ligands

Synthesis and characterization of seven new complexes [Cu(2‐MeSnic)₂(CH₃OH)]₂ (where 2‐MeSnic is 2‐methylthionicotinate), [Cu(2‐MeSnic)₂L₂]₂ (where L is pyridine — py, ethylnicotinate — Etnic and butylnicotinate — Bunic), [Cu(2‐MeSnic)₂L₂(H₂O)₂] (where L is py and nicotinamide — nia) and [Cu(2‐MeSnic)₂(N‐Menia)₂(H₂O)₂]·2H₂O (where N‐Menia is N‐methylnicotinamide) are reported. The characterization were based on elemental analysis, infrared, electronic and EPR spectra, and magnetic susceptibility measurements over a temperature range of 1.8 — 300 K or 70 — 300 K. Three complexes of different type were studied by X‐ray analysis. The molecule of [Cu(2‐MeSnic)₂(CH₃OH)]₂ has dimeric paddle‐wheel cage structure with a tetragonal pyramidal arrangement around Cu^II. The dimer results from the fact that carboxyl groups of four 2‐MeSnic anions function as bridging in a syn‐syn arrangement. On the other hand [Cu(2‐MeSnic)₂(py)₂]₂ forms dimers with hexacoordinated Cu^II atoms in highly distorted coordination octahedra, each with two oxygen atoms of bridging carboxyl groups in an anti‐anti arrangement of two 2‐MeSnic anions, with two oxygen atoms of one asymmetrically chelating 2‐MeSnic anion and with two nitrogen atoms of two pyridine ligands. The temperature independent EPR spectrum for this complex exhibits an axial signal which corresponds to almost isolated S = ¹/₂ magnetic ions. Magnetic data for the dimer show a weak antiferromagnetic interaction between the two metal ions with J = —0.65 cm^—1. The Cu^II atom in complex [Cu(2‐MeSnic)₂(py)₂(H₂O)₂] is hexacoordinated in an elongated centrosymmetrical tetragonal‐bipyramidal arrangement (4 + 2). Based on the molecular structure the electronic, infrared, electron paramagnetic resonance spectra and magnetic properties are discussed and stereochemistry as well as the mode of ligand coordination in new solid complexes under study have been determined.     

Syntheses and Crystal Structures of LnIII–CuI Coordination Polymers

Four three‐dimensional heterometallic coordination polymers, [Ln₂Cu₄I₃(IN)₇(H₂O)]_n ( 1 , 2 ) and [LnCu_3.5I₃(IN)_3.5(H₂O)₃]_n · nH₂O ( 3 , 4 ) [HIN = isonicotinic acid, Ln = Nd ( 1 ), Gd ( 2 ), La ( 3 ), Eu ( 4 )] were hydrothermally synthesized by using lanthanide oxides, isonicotinic acid, copper chloride, and potassium iodide. The different molar ratio of raw materials results in two distinct types of three‐dimensional frameworks of compounds 1 – 4 . The structure of compounds 1 and 2 are constructed by the layer modules of [Ln₂(IN)₇(H₂O)]_n^n– and Cu₄I₃ clusters, whereas that of compounds 3 and 4 are built by dimeric Ln₂(IN)₆(H₂O)₆ and layered polymeric [Cu₇I₆]_nⁿ⁺ units.     

Bis(2‐pyridyl­methanol)­bis­(saccharinato)­zinc(II) and ‐cadmium(II) at 120 K: three‐dimensional structures containing both N‐and O‐coordinated ambi­dentate saccharinate ligands

The title complexes [M(sac)₂(mpy)₂] [sac is saccharinate (C₇H₄NO₃S) and mpy is 2‐pyridyl­methanol (C₆H₇NO)], with M = Zn^II and Cd^II, are isostructural and consist of neutral mol­ecules. The Zn^II or Cd^II cations are octahedrally coordinated by the two neutral mpy and two anionic sac ligands. The mpy ligand acts as a bidentate donor through the amine N and hydroxyl O atoms. The sac ligands exhibit an ambidentate coordination behaviour; one is N‐coordinated and the other is O‐coordinated within the same coordination octahedron. The crystal packing is determined by C—H?O‐type hydrogen bonding, as well as by weak py–py and sac–sac aromatic π–π‐stacking interactions.     

Novel Copper(II) Thiodibenzoic Acid Coordination Polymers by in situ Extrusion of Sulfur from 2,2′‐Dithiodibenzoic Acid and the Unique Oxidation of Disulfide to Sulfate

Slow diffusion reaction of 2,2′‐dithiodibenzoic acid (dtdb) with CuCl₂ in the presence of N‐donor ligands results in the formation of different coordination polymers where both S–S and C–S scission and oxidation of S is observed. X‐ray diffraction analysis of [Cu(tdb)(phen)(H₂O)]₂ · 2H₂O.2DMF] ( 1 ), [Cu(tdb)(py)₂(H₂O)]₂ ( 3 ), and [Cu(tdb)(bipy)(H₂O)]₂ · 0.5H₂O ( 4 ) (tdb = thiodibenzoic acid, phen = phenanthroline, py = pyridine, bipy = 2,2′‐bipyridine) show that the metal ions are coordinated to the carboxylate oxygen atoms of the in situ generated tdb ligand in a monodenate fashion. In [Cu(phen)(SO₄)₂(H₂O)₂]_n ( 2 ) and [Cu(bipy)(SO₄)₂(H₂O)₂]_n ( 5 ), the sulfur is oxidized to sulfate ions prior to coordination with the metal. Complex 1 has a dimeric structure with π–π interactions between the phen ligands, whereas 3 and 4 form 1D polymeric chains.     

catena‐Poly[[[pyridinecopper(II)]bis[μ3‐4‐(2‐oxidobenzylideneamino)benzoato]] dimethylformamide disolvate], a polymer composed of dimeric dicopper building units

The title compound, {[Cu(C₁₄H₉NO₃)(C₅H₅N)]·C₃H₇NO}_n or {[Cu₂L₂(py)₂]·2DMF}_n [py is pyridine, L is 4‐(salicylideneamino)benzoate and DMF is dimethylformamide], is composed of dimeric dicopper [CuL(py)]₂ building units, which are interlinked into a one‐dimensional chain through the formation of Cu—O_COO bonds. The dimeric unit is centrosymmetric, containing two Cu^II atoms linked by bridging phenolate O atoms into a Cu₂O₂ plane with a chelating Cu—O bond length of 1.927 (2) Å and a bridging Cu—O bond length of 2.440 (2) Å. Interchain C—H...O and π–π stacking interactions are responsible for an extensive three‐dimensional structure in which the resulting channels are filled by DMF solvent molecules.     

Poly[[diaqua‐μ‐4,4′‐bipyridine‐dinitratodi‐μ‐l‐tyrosinato‐dicopper(II)]: a chiral two‐dimensional coordination polymer

The title compound, [Cu₂(C₉H₁₀NO₃)₂(NO₃)₂(C₁₀H₈N₂)(H₂O)₂]_n, contains Cu^II atoms and l ‐tyrosinate (l ‐tyr) and 4,4′‐bipyridine (4,4′‐bipy) ligands in a 2:2:1 ratio. Each Cu atom is coordinated by one amino N atom and two carboxylate O atoms from two l ‐tyr ligands, one N atom from a 4,4′‐bipy ligand, a monodentate nitrate ion and a water molecule in an elongated octahedral geometry. Adjacent Cu atoms are bridged by the bidentate carboxylate groups into a chain. These chains are further linked by the bridging 4,4′‐bipy ligands, forming an undulated chiral two‐dimensional sheet. O—H...O and N—H...O hydrogen bonds connect the sheets in the [100] direction. This study offers useful information for the engineering of chiral coordination polymers with amino acids and 4,4′‐bipy ligands by considering the ratios of the metal ion and organic components.     

Ligand-directed copper(І) azide coordination polymers bridged by N-donor ligands with different lengths: azide exhibits a rare μ−1, 1, 3, 3 bridging mode

A Ligand-Directed strategy has been adopted to synthesize three novel Copper(І) coordination polymers, [Cu₂(bpe)(N₃)₂] _n (1), [Cu₂(bpy)(N₃)₂] _n (2), and [Cu₄(py)(N₃)₄] _n (3), by the reactions of NaN₃ with bpe, bpy and py (bpe = 1,2-trans-(4-pyridyl)ethene, bpy = 4,4′-bipyridine, py = pyrazine) in the presence of H₃PO₃ under hydrothermal conditions, which proved that the length of ligands had subtle effects on overall network and the coordination mode of azide.     

A three‐dimensional mixed‐valence CuII/CuI coordination polymer constructed from biphenyl‐3,4′,5‐tricarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands

Coordination polymers (CPs) built by coordination bonds between metal ions/clusters and multidentate organic ligands exhibit fascinating structural topologies and potential applications as functional solid materials. The title coordination polymer, poly[diaquabis(μ₄‐biphenyl‐3,4′,5‐tricarboxylato‐κ⁴O³:O^3′:O^4′:O⁵)tris[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene‐κ²N³:N^3′]dicopper(II)dicopper(I)], [Cu^II₂Cu^I₂(C₁₅H₇O₆)₂(C₁₂H₁₀N₄)₃(H₂O)₂]_n, was crystallized from a mixture of biphenyl‐3,4′,5‐tricarboxylic acid (H₃bpt), 1,4‐bis(1H‐imidazol‐1‐yl)benzene (1,4‐bib) and copper(II) chloride in a water–CH₃CN mixture under solvothermal reaction conditions. The asymmetric unit consists of two crystallographically independent Cu atoms, one of which is Cu^II, while the other has been reduced to the Cu^I ion. The Cu^II centre is pentacoordinated by three O atoms from three bpt³⁻ ligands, one N atom from a 1,4‐bib ligand and one O atom from a coordinated water molecule, and the coordination geometry can be described as distorted trigonal bipyramidal. The Cu^I atom exhibits a T‐shaped geometry (CuN₂O) coordinated by one O atom from a bpt³⁻ ligand and two N atoms from two 1,4‐bib ligands. The Cu^II atoms are extended by bpt³⁻ and 1,4‐bib linkers to generate a two‐dimensional network, while the Cu^I atoms are linked by 1,4‐bib ligands, forming one‐dimensional chains along the [20] direction. In addition, the completely deprotonated μ₄‐η¹:η¹:η¹:η¹ bpt³⁻ ligands bridge one Cu^I and three Cu^II cations along the a (or [100]) direction to form a three‐dimensional framework with a (10³)₂(10)₂(4².6.10².12)₂(4².6.8².10)₂(8) topology via a 2,2,3,4,4‐connected net. An investigation of the magnetic properties indicated a very weak ferromagnetic behaviour.     

Effect of Substituents on Topology and in situ Amide Hydrolysis on Cadmium Isophthalate Coordination Polymers Prepared Using a 4‐Pyridylnicotinamide Precursor

Hydrothermal reactions of cadmium nitrate and 4‐pyridylnicotinamide (4‐pna) with a 5‐substituted isophthalic acid derivative afforded four coordination polymers, whose structural chemistry depends on the nature of the substituent. The crystalline phases produced using bromo and carboxylic acid substituents, [Cd(Brip)(4‐pna)]_n ( 1 ) (Brip = 5‐bromoisophthalate) and [Cd(Hbtc)(4‐pna)]_n ( 2 ) (btc = 1,3,5‐benzenetricarboxylate), have similar structural chemistry. They both exhibit anti‐syn {Cd₂(OCO)₂} dimeric units that serve as 6‐connected nodes for 3D twofold interpenetrated 4¹²6³ pcu networks, which are constructed by the linkage of [Cd₂(carboxylate)₂]_n ribbons by tethering 4‐pna ligands. An in situ amide hydrolysis of the 4‐pna precursor was observed when a bulkier substituent (tert‐butyl or methoxy) was utilized. The resulting nicotinate (nic) anions were incorporated into {[Cd₂(tbip)(nic)₂(H₂O)₄] · H₂O}_n ( 3 ) (tbip = 5‐tert‐butylisophthalate) and [Cd₂(meoip)(nic)₂(H₂O)₂]_n ( 4 ) (meoip = 5‐methoxyisophthalate) which both display an overall (6,3) hexagonal grid layered topology. However, 3 shows isolated cadmium atoms while 4 manifests {Cd₂(OCO)₂} anti‐syn bridged dimeric clusters. Luminescent and thermal properties of these materials are also reported.