Aperture apodization to reduce the off-axis intensity of the pulsed-mode directivity function of linear arrays

There is considerable interest in aperture apodization for enhancing image quality. With continuous wave excitation, the influence of apodization can quite easily be predicted: the directivity function in the far-field corresponds to the Fourier transform of the aperture function. We, however, analyse a practical situation — short acoustic pulse emission focused in the near-field. Nine types of aperture function (for example, Tukey, Parzen, Hamming) are compared.It appears that with the pulsed mode a considerable reduction in off-axis intensity can be obtained by judicious choice of the aperture function. Side-lobes can be completely eliminated.As a tool, an approximate relationship is established between the Fourier transform of the aperture function and the main-lobe width of the directivity function. Further, an optimum balance is sought between the main-lobe width and the width at the ?25 dB level of the directivity function.     

Influence of source directivity on noise levels in industrial halls: Simulation and experiments

Noise exposure of workers in industrial halls is mainly induced by noisy machines whose acoustical features are often globally known by Sound Pressure Level. The evaluation of the directivity of these noise sources can help to anticipate specific solutions for noise reduction.This study shows how the directivities of three wood-working machines have been characterized. Some characterisations have been achieved with a simple and fast acoustical intensity mapping which meets the constraints of industrial areas.When source directivity is evaluated, its influence on the noise field in industrial halls can be assessed. Some simulations and some experiments allowed the estimation of the noise field induced in workshops by both directional and omnidirectional sources. Comparison of the fields prove that the noise distribution is influenced by the source directivity if the halls are empty. As soon as the halls contain scattering objects, the directivity effect is reduced a lot and the noise field remains nearly the same far from the source whatever source used. Nevertheless, workers close to a machine are exposed to noise according to their position with respect to the machine. Exposure at the workplace can vary from 4 to 8 dB(A) according to the directivity of machines such as those measured in the trials.     

丝阵靶箍缩等离子体软X射线辐射能谱研究

 在S—300装置上研究了丝阵靶Z箍缩等离子体的软X射线辐射的动态过程。利用多通道X射线谱仪在50～2 000 eV范围内测量了丝阵靶内爆等离子体X射线辐射谱,辐射主要位于60~220 eV谱段。辐射谱可用温度为40~50 eV的Planck黑体谱近似描述。在能量高于500 eV的谱段,辐射谱与Planck黑体谱有较大的偏离。这主要是因为等离子体热斑的出现、在1.5~2 keV范围内线谱的存在和加速电子轫致辐射的结果。     

Influence of vehicle noise emission directivity on sound level distribution in a canyon street. Part II: Experimental verification

In the paper, predictions of relative sound level distribution on building façades in city-centres obtained by using the simulation PROP11 program are compared with measurements. The simulation involves the geometry of surrounding buildings, road geometry (number of lanes and their positions) and traffic structure (vehicle flow rates and their average speeds). The agreement between measurement and simulation results is tested for different directivity characteristics of an equivalent point source representing the vehicles.     

曲率对有限曲面狭缝阵列传输特性的影响

扩展互导纳法用于研究有限曲面狭缝阵列的传输特性,分析了一维弯曲效应以及单元列数、曲率等因素对磁流分布、散射方向图及频率响应曲线的影响.结果表明,曲面张角是衡量弯曲效应的主要参数. 当曲面张角较大时(120°以上),弯曲效应显著,单元磁流分布剧烈起伏,散射方向图波束展宽且副瓣电平升高,谐振频率、传输带宽及功率透射系数等频率响应特性均发生较大变化.当曲面张角较小时(60°以下),仅边缘附近的单元磁流分布受到曲率影响,散射方向图与传输特性均接近于有限平面阵列,表明此时可近似忽略弯曲效应. 关键词： 频率选择表面 狭缝阵列 传输特性 曲率     

基于季节气候可预报分量的相似误差订正方法和数值实验

基于由历史相似信息对模式预报误差进行预报的思路,发展了一种针对季节气候可预报分量的相似误差订正新方法（FACEPC）,目的是识别模式预报结果中对初值相对不够敏感的可预报分量,将其作为对象进行历史相似选取和误差订正.该方法被应用到国家气候中心业务季节预报模式实验中,对不同区域给出有针对性的相似选取指标和预报方案.25年的交叉检验结果表明,夏季降水和环流的预报技巧评分相对于系统误差订正有明显提高,在发生中等及以上强度ENSO事件年和可预报分量贡献较大地区的预报技巧提高更为显著.特别是中国区域降水和关键区环流的 关键词： 短期气候预测 相似误差订正 可预报分量     

宽带相控线阵声源在套管井外地层辐射声场的指向性

套管井中的声传播涉及到波在柱状多层介质中的传播问题。通过数值计算对比了宽带相控线阵声源在套管井外均匀地层中产生的纵横波声场的指向性。结果表明,在任意胶结状况下,均可实现向套管井外地层定向辐射纵横波的技术;与地层中纵波的传播特征不同的是在主瓣偏转角方向横波幅度随着偏转角的增大逐渐增加,且在主瓣辐射方向的横波幅度受套管井胶结状况的影响较纵波小;采用玻璃钢套管代替钢套管,会进一步减弱地层声场受胶结状况的影响,这有利于实现在套管井外地层较大范围内的精确定向辐射声波的技术。     

气压对大面积等离子体片电子密度分布的影响

利用脉冲磁约束线形空心阴极放电装置,在 15 mT磁场约束下,产生了持续时间为200 s、峰值放电电流为3 A、面积为60 cm60 cm的大面积等离子体片。采用快帧法和旋转空心阴极法,在90~210 Pa内,利用朗缪尔探针首次获得了不同气压的等离子体片的厚度向电子密度分布及其演化构成的二维分布图;研究了在同等峰值放电电流条件下,等离子体片达到最大厚度向峰值电子密度时,气压对所需放电时间、最大厚度向峰值电子密度及电子密度半高宽的影响。结果表明：在相同的峰值放电电流条件下,等离子体片达到最大厚度向峰值电子密度的时间随气压的降低而减小;气压越低,最大厚度向峰值电子密度越大,电子密度半高宽越小。     

Effects of machine errors on the ILC main linac

For a practical linac, the beam property is affected seriously by any machine imperfections. In this paper, the effects of several main errors in the ILC main linac, such as quadrupole misalignment, magnet strength error and cavity misalignment, were studied by a theoretical method. The tolerance for each error was also obtained. Comparison with the numerical simulation result is made and the agreement is quite good.     

折射率调制深度误差对切趾啁啾光纤光栅特性的影响

从耦合模方程出发,用一种矩阵方法分析了折射率调制深度误差对切趾啁啾布拉格光纤光栅传输特性的影响。结果表明：折射率调制深度误差的分布频率越高,光栅传输特性受到的危害越小;误差平均幅值越高,光栅传输特性的劣化程度越大。因此,在光栅的制作过程中,应注意避免和减小高幅值误差,并注意减少低空间频率分布的误差。     

Effects of machine errors on the ILC main linac

For a practical linac, the beam property is affected seriously by any machine imperfections. In this paper, the effects of several main errors in the ILC main linac, such as quadrupole misalignment, magnet strength error and cavity misalignment, were studied by a theoretical method. The tolerance for each error was also obtained. Comparison with the numerical simulation result is made and the agreement is quite good.     

折射率调制深度误差对切趾啁啾光纤光栅特性的影响

从耦合模方程出发,用一种矩阵方法分析了折射率调制深度误差对切趾啁啾布拉格光纤光栅传输特性的影响.结果表明:折射率调制深度误差的分布频率越高,光栅传输特性受到的危害越小;误差平均幅值越高,光栅传输特性的劣化程度越大.因此,在光栅的制作过程中,应注意避免和减小高幅值误差,并注意减少低空间频率分布的误差.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

线性扫频影响超短光脉冲远域衍射场分布的理论分析

本文分析了具有线性扫频高斯型超短光脉冲衍射场的能量分布,教学计算结果显示了线性扫频对衍射场的影响.通过衍射分析可以获得光脉冲的信息.     

Magnetic irreversibility of the Fe antidot arrays film by depositing on the porous alumina templates

An Fe layer was sputter-deposited onto porous alumina templates and Kapton respectively. Fe layer on the porous alumina templates formed an antidot arrays nanostructure, while Fe layer on the Kapton substrate formed a continuous film. Scanning electron microscopy and grazing incidence X-ray diffraction were employed to characterize the morphology and crystal structure of the Fe antidot arrays and continuous film, respectively. The temperature dependence of magnetic properties was shown in the temperature range 2-300 K. The irreversibility of the magnetization of Fe antidot arrays film, as measured in zero-field cooling (ZFC) and field cooling (FC) states, was attributed to the pinning effect of the holes.     

光学渡越辐射理论及其在直线感应加速器脉冲电子束诊断中的应用

匀速运动的带电粒子在穿过具有不同介电常数的两种媒质界面时要产生所谓光学渡越辐射。该辐射在粒子的入射平面上呈偏振行为;从辐射强度的角分布可以确定入射粒子的能量。在入射到双膜系统的情况下,由于干涉的发生,在第二膜前表面的强度角分布有振荡行为。利用这些现象,可对脉冲电子束包络半径、束电流密度的横向分布,束能量以及横向散角进行测量,依照这一原理在各LIA加速器上进行的脉冲电子束参数测量,获得的有效数据极大地提高了加速器的调试效率。     

Effect of precursor concentration on the growth of zinc oxide nanorod arrays on pre-treated substrates

Well aligned zinc oxide nanorod arrays (ZNAs) synthesized by a simple chemical bath deposition method were fabricated on pre-treated Si substrates. By keeping the molar VI/II ratio constant, the effect of precursor concentration on the growth and optical quality of the ZNAs was investigated. The as-synthesized ZNAs were characterized by field emission scanning electron microscopy (FESEM), x-ray diffraction (XRD) and photoluminescence spectroscopy (PL). FESEM images show that both the diameter and aspect ratio of the ZNAs increase dramatically as the precursor concentration increases. The XRD analysis indicates that all the as-grown ZNAs are crystalline and are preferentially oriented along the c-axis. The high intensity ratio of the UV emission to visible emission in the room temperature PL spectra illustrate that high optical quality ZNAs were produced.     

啁啾的引入对线性负切趾型布拉格光栅双稳特性的影响

基于耦合模理论，对线性负切趾型布拉格光栅中引入啁啾后其双稳特性的变化进行了研究.结果表明：引入正啁啾有利于改善线性负切趾型布拉格光栅的双稳态性能；通过合理选择正啁啾、线性负切趾型布拉格光栅的长度，可对其双稳态性能进行进一步优化. 关键词： 啁啾 线性负切趾布拉格光栅 双稳     

失谐对耗散耦合腔阵列体系超流-绝缘相变的影响

利用平均场理论和微扰论解析求解了失谐存在且环境作用下Jaynes-Cummings-Hubbard模型的哈密顿量,得到了体系序参量的解析表达式,并讨论了失谐对体系超流一绝缘相变的影响,研究结果表明:调节失谐可以改变腔间的有效排斥势和系统的临界隧穿率,实现系统在超流态和绝缘态之间转变,结合耗散耦合腔阵列的输运性质探讨了失谐对序参量取值的影响,结果显示:沿失谐负支随着失谐的增大,序参量会经历先增后减的变化。     

饱和功率密度下线性啁啾对交叉偏振波输出特性的影响

交叉偏振波(XPW)技术是一种基于具有各向异性特征的三阶非线性晶体的非线性滤波技术,由于结构简单,稳定可靠,是超强超快激光领域提高时域对比度、压缩脉宽的有效手段之一.在实验中发现,XPW的输出特性受驱动脉冲特性的直接影响,通过理论计算得到了XPW的脉宽和光谱宽度与驱动脉冲的啁啾特性关系,同时利用声光可编程色散滤波器设计实验对理论计算进行了验证.结果表明:实验结果很好地反映了理论计算得出的结论,同时在饱和功率密度条件下,还表现出了一些理论计算没有反映出的新现象,即XPW的光谱展宽突破了驱动脉冲宽度√3倍的限制,最终脉宽也能够压缩至小于入射脉宽的1/√3;此外对于相反线性啁啾的驱动脉冲所产生的XPW信号,其在光谱形状上有明显的偏移差异,同时输出效率也有所不同.最后对这些新现象进行了进一步的分析和理论解释.