Aqueous self-assembly of unsymmetric Peptide bolaamphiphiles into nanofibers with hydrophilic cores and surfaces

Unsymmetric peptide bolaamphiphiles that incorporate (l-glutamyl)3glycine at one terminus and either tetraethylene glycol or aspartic acid at the other were found to form hydrogels at low wt %, presumably by self-assembling into nanofibers presenting (l-glutamyl)3glycine at their surfaces and burying the second headgroup at their cores. Transmission electron microscopy measurements on 1 wt % gels negatively stained with phosphotungstic acid and positively stained with uranyl acetate show one-dimensional objects with diameters of 5 nm and lengths in excess of 1 mum. Circular dichroism and solid-state FTIR spectra indicate the adoption of beta-sheet structure within the nanofibers.     

Hierarchical self-assembly of bolaamphiphiles with a hybrid spacer and L-glutamic acid headgroup: pH- and surface-triggered hydrogels, vesicles, nanofibers, and nanotubes

Bolaamphiphiles with L-glutamic acid headgroups and hybrid linkers, each composed of two rigid benzene rings and different polymethylene units, were designed, and morphological controls of the hierarchical self-assemblies were realized via changing solution pH and application to solid surfaces. At a low pH of 3, bolaamphiphiles formed hydrogels with water and molecules with short and long spacers formed nanofibers and helical nanoribbon-nanotubes, respectively. In a pH 12 aqueous solution, vesicles were observed from cryo-TEM measurements for amphiphiles with short spacers that could transfer to huge vesicles when cast onto a mica surface. Amphiphiles with longer spacers self-assembled into nanoparticles in a pH 12 aqueous solution while micellar fibers were formed on a mica surface. Those assemblies were characterized with UV-vis, CD, and FT-IR spectroscopy and AFM and TEM observations. With molecular structure modification and the fine tuning of conditions, morphology transitions between various nanostructures were obtained from the self-assembled bolaamphiphiles. The environmental pH can induce different interaction modes between the headgroups, and at high pH, there are strong interactions between molecular assemblies and the mica surface. It is suggested that the active headgroups, rigid necks, and flexible linkers with different lengths render molecules with diverse aggregation morphologies.     

Temperature-dependent self-assembly and mixing behavior of symmetrical single-chain bolaamphiphiles

The temperature-dependent self-assembly and the mixing behavior of symmetrical single-chain bolaamphiphiles with different polymethylene chain lengths and different headgroup structures were investigated in water by differential scanning calorimetry (DSC), cryo transmission electron microscopy (cryo-TEM), and small angle neutron scattering (SANS). The even-numbered polymethylene-1,omega-bis(phosphocholines) (PC-C n-PC) are known to form nanofibers composed of stretched molecules with an all- trans alkyl chain conformation (Drescher, S.; Meister, A.; Blume, A.; Karlsson, G.; Almgren, M.; Dobner, B. Chem.Eur. J. 2007, 13, 5300-5307). The odd-numbered analogues were synthesized to study a possible even-odd effect of these bolaamphiphiles during their aggregation in water. In addition to these bolaamphiphiles with phosphocholine headgroups, a new series of polymethylene-1,omega-bis(phosphodimethylethanolamines) (Me2PE-Cn-Me2PE) with smaller headgroup sizes was synthesized. These bolaamphiphiles show an additional fiber-fiber transition when the alkyl chain length exceeds 26 carbon atoms. The mixing behavior of both types of bolaamphiphiles indicates that differences in the alkyl chain length up to six carbon atoms are tolerated within the fiber structure. The mixing of two Me2PE-Cn-Me2PE or PC-Cn-PC type bolaamphiphiles with different alkyl chain lengths offers the possibility to adjust the temperature, where the cross-linking of the fibers is disrupted and where the fibers break apart. As a consequence, temperature switchable hydrogels are obtained that can be fine-tuned for drug delivery applications. The comparison with dotriacontane-1,32-diyl-bis[2-(methylammonio)-ethylphosphate] (MePE-C32-MePE), a new bolaamphiphile with even smaller phosphomonomethylammonio headgroups, illustrates the importance of the headgroup size for the aggregation behavior. This bolaamphiphile self-assembles exclusively into lamellar structures, and this aggregate type persists in mixtures with the fiber forming Me2PE-C32-Me2PE.     

Synthesis and self-assembly behavior of 2,5-diphenylethynyl thiophene based bolaamphiphiles

Synthesized 2,5-diphenylethynyl thiophene based bent bolaamphiphiles can self-organize into square honeycomb LC phases with p4mm symmetries in the presence of water. UV and PL measurements indicate fl uorescent properties making them potential candidates for application in fl uorescence sensor devices     

Supramolecular polymer nanofibers via electrospinning of a heteroditopic monomer

Driven by the benzo-21-crown-7/secondary ammonium salt recognition motif, a linear supramolecular polymer was formed from self-organization of a low-molecular-weight self-complementary monomer in chloroform. From this supramolecular polymer, nanofibers were obtained successfully via electrospinning.     

Influence of flexible spacers on liquid-crystalline self-assembly of T-shaped bolaamphiphiles

T-shaped bolaamphiphiles composed of a biphenyl rigid core, a semiperfluorinated lateral chain, two polar 1,2-diol groups in the terminal positions and flexible alkyl spacers connecting the polar groups with the biphenyl core have been synthesized and investigated by polarizing microscopy, DSC and X-ray scattering. The influence of spacer length and position of the spacer on the self-assembly in liquid-crystalline phases was studied. A series of four different columnar phases (Col(hex)/p6mm, Col(rec)/p2gg, Col(squ)/p4gm and Col(squ)/p4mm), representing liquid-crystalline honeycomb structures composed of cylinders having hexagonal, pentagonal, and square cross section, were found on increasing the spacer length. It is also shown that introduction of aliphatic spacers in the backbone of the T-shaped bolaamphiphiles replaces the Col(rec)/c2mm phase made up of rhombic cylinders with the Col(squ)/p4mm phase composed of square cylinders. It also causes the 2d lattice of pentagonal cylinders to increase the symmetry from Col(rec)/p2gg to Col(squ)/p4gm. A temperature-dependent second-order phase transition between these two pentagonal cylinder structures was observed for the first time. Beside these effects on cylinder shape and phase symmetry the flexible spacer units also lead to reduced phase transition temperatures and allow adjustment of cylinder side length to envelop a wider range of side-chain sizes. Electron density maps suggest that this may involve sacrificing some of the hydrogen bonds.     

Synthesis of rigid homo- and heteroditopic nucleobase-terminated molecules incorporating adenine and/or thymine

A series of homo- and heteroditopic thymine- and/or adenine-terminated molecules incorporating rigid aryl or oligo(phenylene ethynylene) linkers has been efficiently synthesized. The key steps involved in the synthesis are the construction of the N-arylated nucleobases using the Chan-Lam-Evans-modified Ullman coupling and their further elaboration using the Sonogashira coupling. Furthermore, the synthesis of a rigid tripodal thymine derivative is reported.     

Effects of structural variation on the self-assembly of bis-urea based bolaamphiphiles

We report on the self-assembly in water of a set of bis-urea amphiphiles. A range of techniques, including dynamic light scattering, Cryo-TEM, SAXS, and MS are used to study the effect of structural variation on the morphology of the assemblies. The length, dispersity, and end-group of the ethylene glycol hydrophilic part of the molecule, as well as of the alkyl chain length are varied to tailor the morphology towards soluble wormlike micelles. Slight modification on molecular structures gave a large difference in self-assembly behavior in water, giving guidelines for the design of rodlike supramolecular fibers with novel functionalities, such as strain-stiffening and bioactivity.     

Shape-specific nanofibers via self-assembly of three-branched peptide

A novel amphiphilic branched peptide (1), in which three β-sheet formable peptides (L(4)K(8)L(4)) were connected by Lys residue, was newly prepared as a building block for self-assembly. A detailed analysis of the conformation and self-assembling property of 1 in water at various pH conditions was performed by using circular dichroism, FTIR, atomic force and transmission electron microscopies. The experimental results revealed that the branched peptide showed a pH-dependent conformation forming a shape-specific β-sheet-based nanofiber with morphologically kinked structures under specific pH conditions. Exploring a novel peptide building unit that has the ability to self-assemble into designed and complicated nano-objects is valuable to facilitate a bottom-up nanotechnology.     

Selective self-assembly of hexameric homo- and heteropolymetallic lanthanide wheels: synthesis, structure, and photophysical studies

A rational approach to the formation of pure heteropolymetallic lanthanide complexes that uses a two-step assembly strategy and exploits the different size requirements of the two metals included in the final structure is described. The investigation of the assembly of [LnL2](Otf) (L = 2,2':6',2' '-terpyridine-6-carboxylate) complexes into hexametallic rings hosting an additional hexacoordinated lanthanide cation was crucial for the development of this strategy. The formation and size of the cyclic assembly are controlled by the ionic radius and by the coordination number of the lanthanides. The rather high luminescence quantum yield of the heptaeuropium complex (25%) indicates that the ring structure is well adapted to include highly luminescent lanthanide complexes in nanosized architecture. The use of a stepwise synthetic strategy leads to the selective assembly of large heteropolymetallic rings. The addition of a smaller lanthanide ion to the [EuL2](Otf) complex in anhydrous acetonitrile leads selectively to heterometallic species with the Eu ions located on the peripheral sites and the smaller ion occupying only the central site. The high selectivity is the result of the different size requirements of the two metal sites present in the cyclic structure. The heterometallic structure of the isolated [Lu subset (EuL2)6](Otf)9 complex was confirmed by X-ray diffraction and by high resolution solid-state photophysical studies. The described synthetic approach allowed us to obtain the first example of selective assembly of two different lanthanide ions in a large polymetallic structure characterized in solution and in the solid state and will make the isolation of planned dimetallic combinations presenting different lanthanide emitters in the peripheral sites possible.     

Programmable self-assembly of homo- or hetero-metallomacrocycles using 4-(1H-pyrazolyl-4-yl)pyridine

The dimetallic [M(2)(bpy)(2)(NO(3))(2)](NO(3))(2) moieties (M = Pd(II) or Pt(II)) react preferentially at the pyrazolyl end of the pyridyl-pyrazole ligand, giving rise to dimetallic corners. Subsequently, the dimetallic corner building blocks featuring two pyridine donors are coordinated by monometallic [M(bpy)(NO(3))(2)] moieties (M = Pd(II) or Pt(II)) to form homo- or hetero-metallomacrocycles.     

Ultrafine nanofibers fabricated from an arylene-ethynylene macrocyclic molecule using surface assisted self-assembly

Large area uniform nanofibers have been fabricated from a hexameric arylene-ethynylene macrocycle (1) through in situ self-assembly on a glass substrate during solvent evaporation. The fibril morphology is controlled by the solvophilic core of 1, in conjunction with the interfacial interactions between the side chains of 1 and the substrate.     

Spontaneous formation of fluorescent nanofibers from self-assembly of low-molecular-weight coumarin derivatives in water

A solvent-exchange process was applied to three fluorescent dyes belonging to the 2-benzimidazolyl-7-diethylaminocoumarin series (namely Coumarin 7 (1), Coumarin 30 (2), and one of their derivatives bearing a butyl chain (3)). The three compounds only differ by the substitution of the nitrogen atom of the benzimidazolyl group. They were first dissolved in acetone and then suddenly placed in an aqueous environment where they generated molecular assemblies. The size and shape of the latter were studied by fluorescence microscopy and transmission and scanning electron microscopy. It appeared that 1 gave aggregates and flat microcrystals that evolved toward elongated structures. 2 formed straight nanofibers that are 10-20 microm long and exhibit a crystal structure. 3 gave short fibers (1 micromx25 nm), which finally arrange into entangled solid nanofibers. The formation of fibers arising from low-molecular-weight molecules was particularly interesting. The optical properties of the free-standing particles in suspension were analyzed and compared to those of highly dilute dyes, with the aim to get additional information about the dye arrangement in the nanostructures.     

Nanomechanical stimulus accelerates and directs the self-assembly of silk-elastin-like nanofibers

One-dimensional nanostructures are ideal building blocks for functional nanoscale assembly. Peptide-based nanofibers have great potential in building smart hierarchical structures due to their tunable structures at the single residue level and their ability to reconfigure themselves in response to environmental stimuli. We observed that pre-adsorbed silk-elastin-based protein polymers self-assemble into nanofibers through conformational changes on a mica substrate. Furthermore, we demonstrate that the rate of self-assembly was significantly enhanced by applying a nanomechanical stimulus using atomic force microscopy. The orientation of the newly grown nanofibers was mostly perpendicular to the scanning direction, implying that the new fiber assembly was locally activated with directional control. Our method provides a novel way to prepare nanofiber patterned substrates using a bottom-up approach.     

Peptides of DL-willardiine. homo- and heterodipeptides from willardiine

One of the types of pyurinylpeptides (i.e., peptides constructed of pyrimidyl-and purinyl--amino acids) consists of peptides including residues of only those -amino acids the lateral radicals of which contain nucleic bases. Below, such amino acids will be called nucleoamino acids and the peptides derived from them nucleopeptides. The latter are hybrid analogs of nucleic acids and proteins. Their study may lead to important theoretical and practical results.Translated from Khimiya Geterotsiklicheskikh Soedinenii, Vol. 6, No. 7,pp. 1002–1003, July, 1970.We are continuing the synthesis and study of the properties of the pyurinylpeptides and nucleopeptides.     

Helical nanofibers from aqueous self-assembly of an oligo(p-phenylene)-based molecular dumbbell

We have synthesized an amphiphilic dumbbell-shaped molecule consisting of dodeca-p-phenylene and aliphatic polyether dendrons as flexible end groups. The molecular dumbbell in aqueous solution self-assembles into well-defined left-handed helical cylinders with a diameter (8 nm) of a molecular length scale and a pitch length of 5.6 nm, as confirmed by TEM. These elementary helical fibrils are further assembled to give left-handed superhelical fibers with lengths up to several micrometers. Such a well-defined helical arrangement of conjugated rod building blocks may provide a new strategy for the design of one-dimensional nanostructured materials with biomimetic, electronic, and photonic functions.     

Synthesis of polypyrrole micro/nanofibers via a self-assembly process

Novel polypyrrole (PPy) micro/nanofibers were synthesized via a self-assembly process by using 4-hydroxy-3-[(4-sulfo-1-naphthalenyl) azo]-1-naphthalenesulfonic acid (Acid Red B) as dopant and ferric chloride (FeCl₃) as oxidant. Experimental conditions, including the concentration of the dopant, reaction temperature and stirring state have been investigated for their influences on the morphology of the synthesized PPy micro/nanofibers. The products were characterized by scanning electron microscopy, transmission electron microscopy and Fourier-transform infrared spectroscopy. The formation mechanism of micro/nanofibers was studied. It is believed that the micelles formed by the dopant and pyrrole monomer act as templates during the synthesis process. Two functions of aggregation and synthesis are proposed in the reaction system simultaneously, and the morphologies of micro/nanofibers are the co-operations of these two functions. The maximum conductivity value of the PPy micro/nanofibers was 8.56 S cm^?1     

Fabrication of nanofibers with uniform morphology by self-assembly of designed peptides

Fabrication of controlled peptide nanofibers with homogeneous morphology has been demonstrated. Amphiphilic beta-sheet peptides were designed as sequences of Pro-Lys-X(1)-Lys-X(2)-X(2)-Glu-X(1)-Glu-Pro. X(1) and X(2) were hydrophobic residues selected from Phe, Ile, Val, or Tyr. The peptide FI (X(1)=Phe; X(2)=Ile) self-assemble into straight fibers with 80-120 nm widths and clear edges, as examined by transmission electron microscopy (TEM) and atomic force microscopy (AFM). The fiber formation is performed in a hierarchical manner: beta-sheet peptides form a protofibril, the protofibrils assemble side-by-side to form a ribbon, and the ribbons then coil in a left-handed fashion to make up a straight fiber. These type of fibers are formed from peptides possessing hydrophobic aromatic Phe residue(s). Furthermore, a peptide with Ala residues at both N and C termini does not form fibers (100 nm scale) with clear edges; this causes random aggregation of small pieces of fibers instead. Thus, the combination of unique amphiphilic sequences and terminal Pro residues determine the fiber morphology.