Sonophotocatalytic degradation of methyl orange by carbon nanotube/TiO2 in aqueous solutions

In this study, carbon nanotubes (CNTs)/TiO2 composite were prepared and the sonophotocatalytic activity of CNTs/TiO2 nanoparticles was investigated, in which methyl orange (MO) was chosen as an object. The results indicate that the photocatalytic efficiency of CNTs/TiO2 remarkable increases in the presence of ultrasound, and the sonophotocatalysis process followed a first-order kinetics. The kinetic constant of CNTs/TiO2 for the MO degradation is 2.2 times higher than that of P25, which indicated that the sonophotocatalytic ability of CNTs/TiO2 is obviously higher than P25 powder.     

Sonophotocatalytic degradation of methyl orange by nano-sized Ag/TiO2 particles in aqueous solutions

Sonophotocatalytic behaviour of methyl orange (MeO) in aqueous solution illuminated by light generated by a xenon lamp was investigated. For all three kinds of photocatalysts: Degussa P25 (75% anatase, 25% rutile, with a surface area of 55.07 m(2)/g), Yili TiO(2) (mainly anatase, with a surface area of 10.45 m(2)/g) and Ag/TiO(2) (silver loaded on Yili TiO(2)), the degradation followed pseudo-first order kinetics. The results showed a synergistic effect between sonolysis and photocatalysis. Some parameters affecting the sonophotocatalytic degradation of MeO with nanoparticles Ag/TiO(2) were determined. The results indicated that the degradation ratio of MeO increased with the increase of ultrasonic power. An optimum 60 mg/L of Ag/TiO(2) added to relatively low concentrations of MeO was proved to have the most effective degradation efficiency. The study on the effects of hydroxyl radical (*OH) scavengers (i.e. mannitol and dimethyl sulfoxide) on the MeO degradation indicated that *OH radicals played an important role during MeO degradation, which enhanced MeO to be completely decomposed.     

Sonocatalytic degradation of methyl orange in the presence of TiO2 catalysts and catalytic activity comparison of rutile and anatase

Rutile and anatase titanium dioxide (TiO(2)) powders were used as sonocatalysts for the degradation of methyl orange which was used as a model compound. Ultrasound was used as an irradiation source. It was found that the sonocatalytic degradation ratios of methyl orange in the presence of TiO(2) powder were much better than ones without any TiO(2), but the sonocatalytic activity of rutile TiO(2) particles was obviously higher than that of anatase TiO(2) particles. Although there are many factors influencing sonocatalytic degradation of methyl orange, the experimental results show that the best degradation ratio of methyl orange can be obtained when the experimental conditions of the initial methyl orange concentration of 10 mg/l, rutile TiO(2) added amount of 500 mg/l, ultrasonic frequency of 40 kHz, output power of 50 W, pH=3.0 and 40 degrees C within 150 min were adopted. In addition, the catalytic activity of reused rutile TiO(2) catalyst was also studied and found to be better than new rutile TiO(2) catalyst sometimes. All experimental results indicated that the method of the sonocatalytic degradation of organic pollutants in the presence of TiO(2) powder was an advisable choice for treating non- or low-transparent organic wastewaters.     

Sonophotocatalytic degradation of sodium diclofenac using low power ultrasound and micro sized TiO2

The nonsteroidal anti-inflammatory drug sodium diclofenac (DC) is an emerging water pollutant which resists conventional wastewater treatments. Here the sonophotocatalytic degradation of DC was carried out using micrometric TiO₂ (both pristine and Ag-decorated), UV-A irradiation and 20 kHz pulsed ultrasound. Sonophotocatalytic tests were compared with photolysis, sonolysis, sonophotolysis, sonocatalysis and photocatalysis data performed in the same conditions. A synergy index of over 2 was determined for tests with pristine TiO₂, while values close to 1.3 were observed for Ag-TiO₂. Reaction intermediates were studied by HPLC–MS, showing degradation mechanisms activated by hydroxyl radicals. Similar pathways were identified for photocatalytic and sonophotocatalytic tests, although the latter led to more oxidized compounds. Different reactor configurations (static and dynamic set ups) were studied. Sequential and simultaneous application of UV light and ultrasound led to similar performance. The role of water matrix was investigated using ultrapure and drinking water, showing marked detrimental effects of electrolytes on the DC degradation. Overall, the combined treatment proved more efficient than photocatalysis alone especially in demanding working conditions, like in drinking water matrices.     

Ultrasonic degradation of 2:4:6 trichlorophenol in presence of TiO2 catalyst.

The degradation of trichlorophenol has been studied at different intensities of irradiation using ultrasonic horn by changing the power input to the system. Effect of presence of catalyst TiO2 and concentration of catalyst on the degradation rates has also been investigated. The rates of degradation are found to be higher at higher intensities in the absence of catalyst but reverse trend is observed in the presence of catalyst. Adsorption and desorption characteristics of trichlorophenol on TiO2 catalyst have been examined. The catalyst enhances the rates of degradation but it also adsorbs some amount of TCP during the degradation process protecting it from ultrasonic degradation. Thus it is essential to consider the adsorption and desorption kinetics to get proper estimates of the degradation rates when the rates of degradation of TCP are calculated by analyzing the residual concentration of the compound in the liquid. The degradation of the pollutant seems to take place in the liquid only and that too only after desorption of the same from the solid particles. Solid particles seem to play a physical role in the overall degradation scheme, providing additional surface cavitation.     

Photocatalytic activity of multielement doped TiO2 in the degradation of congo red

TiO₂ although considered a promising photocatalyst for the degradation of aqueous pollutants, it suffers from poor absorption in the visible region and hence requires ultraviolet (UV) light for activation. To make TiO₂ a visible active photocatalyst, multielement (C, N, B, and F) doping has been done. The synthesised CNBF/TiO₂ catalysts were calcined at different temperatures and characterized by XRD, BET surface area, UV DRS, XPS, HRSEM-EDAX, and TEM techniques. These catalysts found to show less band gap values when compared to bare TiO₂. These catalysts were tested for their catalytic activity towards the degradation of a textile dye - congo red (CR) under different reaction conditions. It was found that the photocatalytic activity was dependent on both doping of multielement and the calcination temperature of CNBF/TiO₂. The co-doped catalysts which were calcined at 400 °C and 600 °C (100% intensity in anatase phase) were found to be the best catalysts (100% decolourisation of CR in 21/2 h and 2 h respectively). TOC analysis carried out for the samples at the reaction time of 5 h showed very high percentage (83%) degradation of CR over CNBF/TiO₂ catalysts calcined at 600 °C when compared to the other catalysts calcined at different temperatures. CNBF/TiO₂ (1000 °C) showed very less photocatalytic activity due to the formation of rutile phase.     

MnO2/CeO2 for catalytic ultrasonic degradation of methyl orange

Catalytic ultrasonic degradation of aqueous methyl orange was studied in this paper. Heterogeneous catalyst MnO₂/CeO₂ was prepared by impregnation of manganese oxide on cerium oxide. Morphology and specific surface area of MnO₂/CeO₂ catalyst were characterized and its composition was determined. Results showed big differences between fresh and used catalyst. The removal efficiency of methyl orange by MnO₂/CeO₂ catalytic ultrasonic process was investigated. Results showed that ultrasonic process could remove 3.5% of methyl orange while catalytic ultrasonic process could remove 85% of methyl orange in 10 min. The effects of free radical scavengers were studied to determine the role of hydroxyl free radical in catalytic ultrasonic process. Results showed that methyl orange degradation efficiency declined after adding free radical scavengers, illustrating that hydroxyl free radical played an important role in degrading methyl orange. Theoretic analysis showed that the resonance size of cavitation bubbles was comparable with the size of catalyst particles. Thus, catalyst particles might act as cavitation nucleus and enhance ultrasonic cavitation effects. Measurement of H₂O₂ concentration in catalytic ultrasonic process confirmed this hypothesis. Effects of pre-adsorption on catalytic ultrasonic process were examined. Pre-adsorption significantly improved methyl orange removal. The potential explanation was that methyl orange molecules adsorbed on catalysts could enter cavitation bubbles and undergo stronger cavitation.     

Investigation on the sonocatalytic degradation of acid red B in the presence of nanometer TiO2 catalysts and comparison of catalytic activities of anatase and rutile TiO2 powders

Here, the nanometer anatase and rutile titanium dioxide (TiO(2)) powders were introduced to act as the sonocatalysts during the ultrasonic degradation of azo dye-acid red B which was chosen as model compound. The ultrasound of low power was used as an irradiation source to induce TiO(2) particles performing catalytic activity. It was found that the processes of sonocatalytic degradation were different between nanometer anatase TiO(2) and nanometer rutile TiO(2). For nanometer anatase TiO(2) catalyst, the acid red B was mainly oxidated by the holes on the surface of nanometer anatase TiO(2) particles, so that the decolorization and degradation happened at the same time. For the nanometer rutile TiO(2) catalyst, the acid red B was mainly oxidated by the *OH radicals from the ultrasonic cavitation, so that the decolorization of azo bond takes place primarily, and then the degradation of naphthyl ring does. The intermediates of acid red B in the presence of nanometer anatase and rutile TiO(2) powders have been monitored by UV-vis spectra and high performance liquid chromatography (HPLC), respectively. All experiments indicated that the degradation effect of acid red B in the presence of nanometer anatase TiO(2) powder was obviously better than that in the presence of nanometer rutile TiO(2) powder. Hence, the method of sonocatalytic degradation for organic pollutants in the presence of nanometer anatase TiO(2) powder is expected to be promising as an advisable choice for the treatment of organic wastewaters in future.     

Sonophotocatalytic decomposition of water using TiO(2) photocatalyst

Sonophotocatalytic reaction is a photocatalytic reaction with ultrasonic irradiation or the simultaneous irradiation of ultrasound and light with a photocatalyst. The possibility of the effect of hybrid of sonochemical and photocatalytic reactions was examined. Liquid water was hardly decomposed to H(2) and O(2) by photocatalysis or sonolysis, independently. In order to decompose water, powdered TiO(2) photocatalyst suspended in distilled water should be simultaneously irradiated by light and ultrasound. This sonophotocatalytic reaction was effective on the decomposition of water to H(2) and O(2).     

Kinetics of ultrasonic degradation of phenol in the presence of TiO2 particles

The degradation of phenol by ultrasonic irradiation in the presence of TiO2 was investigated in complete darkness. The effects of amount of TiO2 and the combination of TiO2 addition with gas (air or oxygen) supply on the degradation kinetics of phenol and the formation of the reaction products were examined. The degradation rate of phenol increased with the amount of TiO2. As the dissolved oxygen concentration increased by supplying oxygen, the degradation rate of phenol also increased. A kinetic model for the disappearance of phenol was proposed. The model takes into account the OH radical formation by direct water degradation, indirect degradation by oxygen atom and indirect degradation by TiO2 catalysis. The calculated results explained well the fact that a higher amount of TiO2 and dissolved oxygen concentration gave faster disappearance rate.     

Highly active V-TiO2 for photocatalytic degradation of methyl orange

Two kinds of vanadium-doped TiO₂ powders photocatalysts were prepared by sol-gel method in even doping and uneven doping modes, and were characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-vis diffuse reflectance spectroscopy (DRS). The photocatalytic activity of TiO₂ photocatalysts doped by vanadium evenly with lower dopant level up to 0.002 mol.% is better than that of undoped TiO₂, while with higher dopant level the activity is worse. TiO₂ photocatalysts doped by vanadium unevenly with a p-n junction semiconductor structure, was shown to have a much higher photocatalytic destruction rate than that of TiO₂ photocatalysts doped by vanadium evenly and undoped TiO₂, which is ascribed mainly to the electrostatic-field-driven electron-hole separation in TiO₂ particles doped by vanadium unevenly.     

Synergistic degradation of methyl orange in an ultrasound intensified photocatalytic reactor

An original ultrasound (US) directly intensified photocatalytic reactor was designed to degrade azo dye pollutant methyl orange (MeO) using Degussa TiO(2) as the photocatalyst. The sonolytic, photocatalytic and sonophotocatalytic degradation of MeO in the new reactor and the synergistic effect between sonolysis and photocatalysis were investigated. Effects of operation parameters i.e., US power, TiO(2) dosage, liquid circulation velocity and air flow rate on degradation efficiency were investigated and optimized. The results showed that all parameters have optimal values for the sonophotocatalytic degradation of MeO, and the optimum conditions for the new process are US power 600 W, TiO(2) dosage 3g/L, liquid circulation velocity 4.05×10(-2) m/s and air flow rate 0.2 L/min. Under the optimum conditions, 91.52% MeO had been degraded within 1h, and the combination of sonolysis and TiO(2) photocatalysis exhibited an obvious synergetic effect.     

Sonochemically enhanced adsorption and degradation of methyl orange with activated aluminas

Removal of Methyl orange (MO), as a model contaminants, in aqueous solution by the simultaneous application of ultrasound with the addition of porous adsorbent powders is reported. Activated alumina powders in acidic form were used as an adsorbent. Results showed that MO could be degraded by ultrasonic irradiation at 130 kHz with the first order rate constant of 8x10(-4) and 5x10(-4) sec(-1), in acidic and basic conditions, respectively, without adsorbents. Adsorption rates of MO by activated alumina mainly depended on the acidity of alumina, the pH of solution and the stirring speed. At pH=4.2 with mechanical stirring without ultrasonic radiation, acidic activated alumina (0.1 g/100 ml) removed MO at about two times more rapidly than ultrasonic irradiation. In the case of simultaneous application of ultrasound irradiation and activated alumina, MO was almost removed from the solution within 10 min, which corresponded to as a rate constant of 5x10(-3) sec(-1). This kind of synergistic enhancement of removal rate with ultrasound and adsorbents should be practically useful for the elimination of contaminants in the water treatment processes. In addition, the effects of pH and coexisting chemicals in the solution were examined for the processes. Although the adsorption process was effective in some selected conditions, ultrasonic degradation was more robust in wider range of pH and coexisting chemicals. Simultaneous application of the two processes can perform complementary.     

Degradation of methyl orange by atmospheric DBD plasma: Analysis of the degradation effects and degradation path

The degradation process of methyl orange solution by dielectric barrier discharge (DBD) plasma using a board-DBD reactor was studied. The percentage destruction reached 99% after 35 min treatment. The pH value of the methyl orange solution decreased with the treatment time and it reached a constant value when discharged for 20 min. The COD value of the methyl orange solution decreased by 57.9% for 30 min treatment. The degradation path was suggested based on the analysis of the molecular structure of methyl orange, intermediate products and the molecular bond energies.     

Photocatalytic degradation of methyl orange by nano-TiO_2 thin films prepared by RF magnetron sputtering

Nano-TiO2 thin films are deposited by radio frequency （RF） magnetron sputtering using TiO2 ceramic target and characterized by X-ray diffractometer, atomic force microscope, and ultraviolet-visible spectrophotometer. The photocatalytic activity is evaluated by light-induced degradation of methyl orange solutions （5, 10, and 20 ppm） using a high pressure mercury lamp as the light source. The film is amorphous, and its energy gap is 3.02 eV. The photocatalytic degradation of methyl orange solution is the first-order reaction and the apparent reaction rate constants are 0.00369, 0.0024, and 0.00151 for the methyl orange solution concentrations of 5, 10, and 20 ppm, respectively.     

Sonocatalytic degradation of Rhodamine B in the presence of C60 and CdS coupled TiO2 particles

CdS-TiO₂ and CdS-C₆₀/TiO₂ were prepared using C₆₀, cadmium acetate dehydrate [(CH₃COO)₂Cd·2H₂O], sodium sulfide (Na₂S·5H₂O) and titanium (IV) n-butoxide by a sol-gel method. The prepared sonocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and transmission electron microscopy (TEM). A rhodamine B (RhB) solution under ultrasonic irradiation was used to determine the catalytic activity. Excellent catalytic degradation of an RhB solution was observed using the CdS-C₆₀/TiO₂ composites under ultrasonic irradiation. C₆₀ coupled CdS-TiO₂ can enhance the Brunauer-Emmett-Teller (BET) surface area and increase the decolorization rate for rhodamine B solution. The results also shows that increase the content of CdS can enhance the catalytic activity.     

The mechanism of sonophotocatalytic degradation of methyl orange and its products in aqueous solutions

In this study, it was found that a hybrid technique, sonophotocatalysis, is able to degrade a parent organic pollutant (methyl orange) as well as its by-products. The analysis of products formed during the whole degradation has demonstrated that the pH or the selection of oxidation process (sonolysis/photocatalysis/sonophotocatalysis) is able to control the degradation pathway. It was shown in the by-products analysis that the solution pH can alter the amount of each product generated during the sonophotocatalytic degradation. It was revealed that the different degradation rates of methyl orange and its products result from the solution pH and the nature of the organic products. Furthermore, a comparison of the data obtained from the oxidation processes on the degradation of the reaction intermediates identified the advantages of the combined system. It is concluded that sonophotocatalysis is capable of yielding a more complete and faster mineralization of organic pollutants than the individual processes. However, as in the degradation of the parent compound, the overall mineralization is lower than an additive effect (negative synergistic effect).     

Enhanced ultrasound-assisted degradation of methyl orange and metronidazole by rectorite-supported nanoscale zero-valent iron

In this study, the rectorite-supported nanoscale zero-valent iron (nZVI/R) was synthesized through a reduction method. X-ray diffraction analysis showed the existence of the nZVI in the nZVI/R composite and X-ray photoelectron spectroscopy analysis indicated that the nZVI particles were partly oxidized into iron oxide. Scanning electron microscopy analysis revealed that the nZVI particles were highly dispersed on the surface of the rectorite. The specific surface area of the nZVI/R composite is 21.43 m²/g, which was higher than that of rectorite (4.30 m²/g) and nZVI (17.97 m²/g). In the presence of ultrasound (US), the degradation of methyl orange and metronidazole by the nZVI/R composite was over 93% and 97% within 20 min, respectively, which is much higher than that by the rectorite and the nZVI. The degradation ratio of methyl orange and metronidazole by the nZVI/R composite under US was 1.7 and 1.8 times as high as that by the nZVI/R composite without US, respectively. The mechanism of the enhanced degradation of methyl orange and metronidazole under US irradiation was studied. These results indicate that the US/nZVI/R process has great potential application value for treatment of dye wastewater and medicine wastewater.     

Photocatalytic degradation of methyl orange by gold silver nano-core/silica nano-shell

The silica nanoparticles (SiO₂ NPs), silver (Ag) NPs and gold (Au) NPs coated with SiO₂ NPs (core-shell) were prepared. The sizes and morphology of the particles were indicated. The three prepared NPs were used for photocatalytic degradation of methyl orange (MO) dye by xenon lamp. Rate of photocatalytic degradation reaction constant and lifetime were calculated for each catalyst. Moreover, the mechanism of the photocatalytic reaction was studied.