The synthesis and cationic polymerization of multifunctional silicon-containing epoxy monomers and oligomers

Several series of multifunctional silicon-containing epoxide monomers and oligomers have been prepared using rhodium catalyzed hydrosilation reactions. Dialkyl and diarylsilanes can be condensed with vinyl epoxides to give high yields of the desired diepoxides while the hydrosilation of alkyl and aryl silanes yields a mixture of di and tri epoxy substituted products. The condensation of αω,? Si? H difunctional compounds with vinyl epoxides can be carried out regioselectively to give α-hydrogen-ω-epoxy intermediates, which can be further reacted with di and tri olefins bearing terminal double bonds to give a series of well characterized epoxy functional oligomers. An investigation of the photoinitiated cationic polymerization of the monomers and oligomers, which were prepared during the course of these studies, was carried out. © 1994 John Wiley & Sons, Inc.     

Novel dialkylaminoalkyl- and dialkylaminoalcoxy-benzophenones as polymerization photoinitiators. II. Photocalorimetric study on photoinitiated polymerization of butyl and lauryl acrylates

A photocalorimetric study of butyl and lauryl acrylates (BA and LA) polymerization photoinitiated by several benzophenone derivatives is reported. Molecular weight measurements and end-chain group analysis of the samples are also described and the results are compared with those obtained by dilatometric technique. The role played by the long methylene chain in lauryl acrylate is discussed     

Unusually highly efficient,singlet state,visible light photoinitiators based on styrylbenzimidazolium phenyltributylborate photoredox pairs for vinyl monomers free radical polymerization

In this article, hemicyanine dye–borate complexes, for example, 1,3‐dimethyl‐2‐[4‐(N,N‐dialkylamino)styryl]benzimidazolium phenyl‐tri‐n‐butylborates, were employed as the novel, very effective photoinitiators operating in the visible light region. The influence of the sensitizers and electron donor structure on the photopolymerization kinetics of multiacrylate monomer was investigated by photo‐DSC. The maximum photopolymerization quantum yield measured for 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol triacrylate (TMPTA) was about 67 for sample of thickness of about 1 mm under 100 mW/cm² laser irradiation. It was found that the polymerization rate and the final conversion degree were depended on the dye structure. Moreover, the photoinitiating systems described gave a double bond conversion higher than the photoinitiator possessing as chromophore RBAX (Rose Bengal derivative), the common triplet state initiator. Additionally, the rate of photopolymerization depends on ΔG_el of electron transfer between borate anion and styrylbenzimidazolium cation. This latter value was estimated for a series of styrylbenzimidazolium borate salts. The relationship between the rate of polymerization and the free energy of activation for electron transfer reaction gives the dependence predicted by the classical theory of electron transfer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4119–4129, 2009     

Azahelicenes as visible light photoinitiators for cationic and radical polymerization: Preparation of photoluminescent polymers and use in high performance LED projector 3D printing resins

In this article, novel azahelicenes (AZs) were synthesized and proposed as high performance visible light photoinitiators for both the free radical polymerization of acrylates and the cationic polymerization (CP) of epoxides upon visible light exposure using Light Emitting Diodes (LEDs) @405, @455, and @470 nm. Excellent polymerization initiating abilities are found and high final conversions were obtained. Remarkably, an exceptional long lifetime photoluminescence property of the polymer films was observed when synthesized in presence of AZs. A full picture of the involved chemical mechanisms is given. AZs being high performance photoinitiators, their use in new cationic LED 3D printing resins will be also presented, that is, the cationic process upon LED projector @405 nm can be useful to reduce the shrinkage usually observed for radical polymerization. LED projector printing is very interesting compared to laser writing as this technology projects the profile of an entire layer of a 3D object at one time. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1189–1199     

Light‐induced controlled free radical polymerization of methacrylates using iron‐based photocatalyst in visible light

A novel visible light mediated catalytic system based on low cost iron complex, that is, Fe(bpy)₃(PF)₆ photocatalyst that initiates and control the free radical polymerization of methacrylates using ethyl α‐bromoisobutyrate (EBriB) as an initiator and 20 watt LED as light source is developed. The polymerization is initiated with turning the light on and immediately terminated by turning the light off. In addition, the molecular weight of polymer can be varied by changing the ratio of monomer and initiator. The merits of the present methodology lie in the use of low cost less precious, highly abundant iron‐based photocatalyst, avoidance of sacrificial donor and need of lower catalyst amount under visible light. The optimum amount of catalyst and initiator were established and successful polymerization of various methacrylates was achieved under the optimized polymerization conditions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2739–2746     

Novel dialkylaminoalkyl- and dialkylaminoalcoxi-benzophenones as photoinitiators of polymerization. I. Photochemical characteristics and radical efficiencies

The behavior of the nonconjugated aminated benzophenones—4-[2′-N,N-(diethylamino)ethoxy]benzophenone (E4), 2-[2′-N,N-(diethylamino)ethoxy]-4-methoxybenzophenone (E2), and 4-N,N-dimethylaminomethylbenzophenone (DM)—as photoinitiators of MMA polymerization has been studied and the results compared with those obtained with the conjugated aminobenzophenone 4-N,N-dimethylamino-4′-isopropyl-benzophenone (CU—MI). Photoreduction behavior of these compounds in various solvents in the presence and absence of MMA has been also examined. The order of the polymerization reaction with respect to monomer and initiator concentrations has been investigated; values of initiation quantum yield (Φ_i), K_p/K^1/2_t and efficiencies of the different radicals have also been determined. Similar polymerization rates (R_p) of methyl methacrylate (MMA) were found when E4 and CU-MI were used as photoinitiators under the same range of absorbed irradiation intensity. This fact results from a compensation between the higher rate of E4 radical production (n-π* transition type) and the greater reactivity of the radicals generated from CU-MI.     

A new visible light sensitive photoinitiator system for the cationic polymerization of epoxides

This communication reports the development of an efficient three‐component visible light sensitive photoinitiator system for the cationic ring‐opening photopolymerization of epoxide monomers and epoxide functional oligomers. The photoinitiator system consists of camphorquinone in combination with a benzyl alcohol to generate free radicals by the absorption of visible light. Subsequently, the radicals participate in the free radical chain induced decomposition of a diaryliodonium salt. The resulting strong Brønsted acid derived from this process catalyzes the cationic ring‐opening polymerization of a variety of epoxide substrates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 866–875, 2009     

Photocrosslinking of functionalized rubber. III. Polymerization of multifunctional monomers in epoxidized liquid natural rubber

Different types of tridimensional polymer networks have been synthesized by photoinitiated polymerization of difunctional monomers blended to an epoxidized natural rubber. The crosslinking reaction was followed by infrared spectroscopy and shown to proceed extensively within less than 1 s for the cycloepoxy, vinyl ether, and acrylate monomers used. By acting as a plasticizer, the monomer was found to markedly accelerate the ring-opening polymerization of the epoxy groups of the rubber chain. Cationic polymerization continues to proceed effectively after the UV-exposure, until total consumption of the epoxy groups. The nature of the comonomer has a strong influence on the properties of the crosslinked rubber. Low-modulus polymers were obtained with divinyl ether monomers, while hard but still flexible films were obtained with dicycloepoxy and diacrylate monomers. © 1996 John Wiley & Sons, Inc.     

Reactivity of oxetane monomers in photoinitiated cationic polymerization

Studies of the onium salt photoinitiated cationic ring‐opening polymerizations of various 3,3‐disubstituted oxetane monomers have been conducted with real‐time infrared spectroscopy and optical pyrometry. The polymerizations of these monomers are typified by an extended induction period that has been attributed to the presence of a long‐lived tertiary oxonium ion intermediate formed by the reaction of the initially formed secondary oxonium ion with the cyclic ether monomer. Because the extended induction period in the photopolymerization of these monomers renders oxetane monomers of limited value for many applications, methods have been sought for its minimization or elimination. Three general methods have been found effective in markedly shortening the induction period: (1) carrying out the photopolymerizations at higher temperatures, (2) copolymerizing with more reactive epoxide monomers, and (3) using free‐radical photoinitiators as synergists. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3205–3220, 2005     

调制式DSC在高聚物研究中的应用

综述了一种新的热分析技术－－调制式差示扫描量热示（Modulated Differentail Scanning Calorimetry）。对其工作原理，优点及在高聚物研究中的应用作了简介。     

差示扫描量热法中相变潜热公式的推导

通过考虑热分析过程中存在于试样内的温度梯度,就相变前后试样的比热容发生变化、并且是温度的函数这一普遍情况,推导得到了普遍的用差示扫描量热法求相变潜热的公式     

调制差示扫描量热法在高分子材料中的应用

调制差示扫描量热法(MDSC)是在传统线性变温基础上叠加一个正弦震荡温度程序,将总热流量分解为可逆热流(热容成分)和不可逆热流(动力学成分),同时具有较高的灵敏度和分辨率,在研究高分子材料复杂相变时具有独特的优势。近年来,MDSC在研究高分子材料的玻璃化转变、结晶-熔融、热容变化等领域得到了较为广泛的应用。本文对MDSC近年来在高分子材料中的最新研究应用做了详细介绍。     

调制式差示扫描量热法在高分子研究中的应用

介绍了调制式差示扫描量热法(MDSC)的工作原理及其作为一种新的热分析手段的优点。并通过一些实例介绍了MDSC法在高分子研究中的应用。     

Study of the Isothermal Bulk Polymerization of Methacrylic Acid and Some Methacrylic Acid Esters by Differential Scanning Calorimetry

Abstract

The course of the isothermal bulk polymerization of methacrylic acid and some methacrylic acid esters differing in the length of the ester group was studied by differential scanning calorimetry at different temperatures. The enthalpies of polymerization, the residual monomer content, the overall reaction rate constants, and the overall activation energies were calculated. The molecular weight averages of the synthesized polymers before and after the gel effect were measured by gel permeation chromatography.     

Development of new high‐performance visible light photoinitiators based on carbazole scaffold and their applications in 3d printing and photocomposite synthesis

In this article, new compounds based on the carbazole scaffold (DMs = DM1 and DM2, constituted by a carbazole unit connected on positions 3 and 6 to a two 4,4′‐dimethoxydiphenylamine groups and differing by the substituent present on the nitrogen heteroatom of the carbazole core) were synthesized and proposed as high‐performance visible light photoinitiators/photosensitizers for both the free‐radical polymerization of methacrylates and the cationic polymerization of epoxides upon visible light exposure using LED@405 nm. Remarkably, DM2 leads to higher final conversions than DM1. In order to study the photophysical and photochemical properties of the carbazole derivatives, different parameters were taken into account such as the light absorption, the steady‐state photolysis, and the fluorescence spectroscopy. Using different techniques such as fluorescence quenching, redox behavior, and cyclic voltammetry, we are able to discuss the photosensitization/photoinitiation reactions providing a full coherent picture of the involved chemical mechanisms. The photosensitization of the carbazole derivatives occurred predominantly via singlet excited states at the rate of the diffusion limit. Upon exposure to laser diode at 405 nm, DMs show high performance in initiating systems for 3D resins. Remarkably, DM2 can also be used in photocomposite synthesis using light‐emitting diode conveyor. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2081–2092     

Propenyl ethers. III. Study of the photoinitiated cationic polymerization of propenyl ether monomers

The effects of photoinitiator structure and variations in the experimental parameters on the rate and extent of the photoinitiated cationic polymerization of propenyl ether monomers were studied. It was found that the photoinitiators can be divided into two classes: those which exhibit an induction period and those which do not. It was demonstrated that in those propenyl ether polymerizations using iodonium salts and certain sulfonium salts which do not have an induction period, a free radical chain-induced decomposition of the onium salt takes place. The reactivity of a particular onium salt photoinitiator was shown to be related to its reduction potential. It was also shown that the structure of the monomer plays a major role in the free radical induced decomposition reaction. © 1993 John Wiley & Sons, Inc.     

Regioselective hydrosilations. IV. The synthesis and polymerization of monomers containing epoxy and alkoxysilane groups

Using rhodium and platinum catalyzed regioselective hydrosilation, a series of α-hydrogen-ω-epoxy silane and siloxane compounds have been prepared in good yields. These intermediates have been further condensed with vinyltrimethoxysilane in subsequent hydrosilation reactions to prepare an interesting new class of ambifunctional monomers containing both epoxy and trimethoxysilane groups. It was further shown that these same compounds could be synthesized by a simplified “one-pot” two-step procedure. An investigation of the simultaneous cationic ring-opening polymerization of the epoxy groups and the acid-catalyzed condensation of the trimethoxysilyl groups was carried out. © 1993 John Wiley & Sons, Inc.     

Modulated Differential Scanning Calorimetry Observation of Physical Ageing in Polymers

Modulated-temperature differential scanning calorimetry (M-TDSC) is becoming a useful tool in the characterisation of thermal behaviour of polymers. In this paper, we discuss whether the non-reversing M-TDSC signal can be used, quantitatively and directly, to study the process of physical ageing in polymers. Difference exists between the values of relaxation enthalpy determined by using average heat capacity, <C _p>, signal as for conventional DSC and non-reversing heat capacity, C ⁿ _p, signal. When the signal of reversing heat capacity of unaged sample is considered as baseline for <C _p> and C ⁿ _p signals, the difference disappears. It is concluded that non-reversing M-TDSC signal can be used to observe the process of physical ageing semi-qualitatively and directly. With increasing annealing time, the peak of the imaginary part, C″_p, of the complex heat capacity becomes narrow, but peak area changes little. This indicated that C″_p is not correlated with relaxation enthalpy. It may be related to entropy change during the modulation. However, the entropy change is quite small. This revised version was published online in August 2006 with corrections to the Cover Date.     

Propenyl ethers. II. Study of the photoinitiated cationic polymerization of propenyl ether monomers

The results of studies of the photoinitiated cationic polymerization of mono-, di-, and multifunctional propenyl ethers are reported in this article. Real-time infrared spectroscopy and differential scanning photocalorimetry were used to determine the reactivity of the monomers with respect to each other and in relation to other types of cationically polymerizable monomers. Propenyl ethers were observed to be highly reactive monomers in photoinitiated cationic polymerization undergoing very high conversions to polymer at very short irradiation times. Attempts were also made to correlate the structures of these monomers with their reactivity as well as to examine the effects of various experimental parameters on their photopolymerization. © 1993 John Wiley & Sons, Inc.     

示差扫描量热法进展及其在高分子表征中的应用

示差扫描量热法(DSC)是表征材料热性能和热反应的一种高效研究工具,具有操作简便、应用广泛、测量值物理意义明确等优点.近年来DSC技术的发展大大拓展了高分子材料表征的测试范围,促进了对高分子物理转变的热力学和动力学的深入研究.温度调制示差扫描量热法(TMDSC)是DSC在20世纪90年代的标志性进展,它在传统DSC的线性升温速率的基础之上引入了调制速率,从而可将总热流信号分解为可逆信号和不可逆信号两部分,并能测量准等温过程的可逆热容.闪速示差扫描量热法(FSC)是DSC技术近年来的创新性发展,它采用体积微小的氮化硅薄膜芯片传感器替代传统DSC的坩埚作为试样容器和控温系统,实现了超快速的升降温扫描速率以及微米尺度上的样品测试,使得对于高分子在扫描过程中的结构重组机制的分析以及对实际的生产加工条件的直接模拟成为可能.本文从热分析基础出发,依次对传统DSC、TMDSC和FSC进行了介绍,内容覆盖其发展历史、方法原理、操作技巧及其在高分子表征中的应用举例,最后对DSC未来的发展和应用进行了展望.本文希望通过综述DSC原理、实验技巧和应用进展,帮助读者加深对DSC这一常用表征技术的理解,进一步拓展DSC表征高分子材料的应用.