Ag nanoparticles prepared by laser photoreduction as substrates for in situ surface-enhanced Raman scattering analysis of dyes

In this work Ag nanoparticles (AgNP) with surface-enhanced Raman scattering (SERS) activity were prepared and immobilized by laser irradiation on a water/ solid interface where the aqueous phase contains the Ag+ cation and the solid surface is of hydrophilic nature (glass and cellulose). The so-prepared AgNP demonstrated a high SERS effectiveness in the detection of dispersed adsorbates such as the case of the anthraquinonic dye alizarin. The size and SERS effectiveness of AgNP increases with the irradiation time, the laser power, and the cation concentration. Laser-induced AgNP can be classified into two classes attending to the morphology: spherical and planar. The latter are formed after longer irradiation times, being more active regarding the SERS efficiency. Ag photoreduction can be employed for in situ detection of the dye alizarin, but when the dye is placed on a hydrophilic substrate. Even so, this in situ SERS technique could be attractive for analytical applications involving the in situ detection of the analyzed species, such as the case of dyes in artistical objects, textiles, foods, and surface analysis in general.     

Ordered gold nanoparticle arrays as surface-enhanced Raman spectroscopy substrates for label-free detection of nitroexplosives

Nitroexplosives, such as 2,4,6-trinitrotoluene (TNT) which is a leading example of nitroaromatic explosives, are causing wide concern. Motivated by the urgent demand for trace analysis of explosives, novel surface-enhanced Raman spectroscopy substrates based upon highly ordered Au nanoparticles have been fabricated by a simple droplet evaporation method. It is noteworthy that an ethylhexadecyldimethyl ammonium bromide bilayer surrounding each individual nanoparticle not only is responsible for these periodic gap structures, but also tends to promote the adsorption of TNT on the composite NPs, thus resulting in a considerable increase of Raman signal. These desirable features endow the resulting SERS substrates with excellent enhancement ability and allow for a label-free detection of common plastic explosive materials even with a concentration as low as 10⁻⁹ M.     

Size-controllable synthesis of surface-enhanced Raman scattering-active gold nanoparticles coated on TiO2

As shown in the literature, gold nanoparticles (NPs) were popularly used in the fields of catalyst and surface-enhanced Raman scattering (SERS). In this work, size-controllable Au NPs coated on TiO(2) are synthesized by adjusting the pH of solutions based on sonoelectrochemical methods. The size-controlled Au NPs on TiO(2), ranging from 2 to 80 nm in diameter, can be obtained by varying the pH of solutions from 3 to 7 and placing the sample for 3 h before sonoelectrochemical reductions. The optimal particle sizes of Au NPs on TiO(2) to obtain the strongest SERS effects under an irradiation of 785 nm for probe molecules of adsorbed Rhodamine 6G (R6G) and deposited polypyrrole (PPy) are all ca. 60 nm.     

Silver nanoparticles active as surface-enhanced Raman scattering substrates prepared by high energy irradiation

In surface-enhanced Raman scattering (SERS) technique the preparation of metal substrates containing minimum hindrance from impurities is an important issue. The synthesis of silver nanoparticles (Ag NPs) active as SERS substrates and having the above-mentioned advantage, were obtained by electron beam irradiation of Ag⁺ aqueous solutions. Ag⁺ ions were reduced by free radicals radiolytically generated in solution without the addition of chemical reductants or stabilizing agents.The metal colloids were characterised by UV-Vis spectroscopy and scanning electron microscopy, monitoring the nanoparticles’ growth process that depends on the irradiation dose and the initial AgNO₃ concentration. Nanoparticles of long-time stability and with different size and shape, included silver nanocubes, were synthesised by varying the irradiation dose. Different tests on the SERS activity of Ag NPs obtained by electron beam irradiation were performed by using benzenethiol as a probing molecule, achieving a good magnification of the adsorbate Raman bands.     

Planar monolithic porous polymer layers functionalized with gold nanoparticles as large-area substrates for sensitive surface-enhanced Raman scattering sensing of bacteria

For the first time, large-area surface-enhanced Raman scattering sensing active substrates using porous polymer monolithic layers have been successfully prepared. Our approach includes a simple photoinitiated polymerization process using glycidyl methacrylate and ethylene dimethacrylate in a glass mold, followed by a chemical reaction of the epoxy functionalities leading to thiols, and the attachment of preformed gold nanoparticles. We demonstrated that this very simple process produced uniform and reproducible large area surfaces that significantly enhance sensitivity of Raman spectroscopy. Experiments were also carried out that confirmed preferential adsorption of living bacteria Escherichia coli from a very dilute solution on the surface of the monolithic layer, and immediate detection of the captured microorganisms using the SERS spectrum.     

Approaching the electromagnetic mechanism of surface-enhanced Raman scattering: from self-assembled arrays to individual gold nanoparticles

Surface-enhanced Raman scattering (SERS) has been intensively explored both in theory and applications and has been widely used in chemistry, physics and biology for decades. A variety of SERS substrates have been developed in order to investigate the mechanisms behind, which give rise to the enormous enhancement even enabling single molecule detection. The Raman enhancement, which involves an electromagnetic enhancement (EM) and a chemical enhancement (CM), reflects both the physical principle of light/metal interactions and the molecule/metal interactions. In this tutorial review, we focus on the EM enhancement of SERS active substrates made of colloidal gold nanoparticles (GNPs), varying from self-assembled arrays down to single particles, for the purpose of investigating the EM coupling effect and probing the distribution of the induced electric field of single GNPs.     

Study of molecular trapping inside gold nanofinger arrays on surface-enhanced Raman substrates

The binding of trans-1,2-bis(4-pyridyl)-ethylene (BPE) molecules on substrates arrayed with flexible gold nanofingers has been studied by surface-enhanced Raman spectroscopy (SERS) and angle-resolved X-ray photoelectron spectroscopy (AR-XPS). On the basis of the SERS and XPS results, BPE molecules are found to interact with the gold nanofingers through the lone pair electrons of pyridyl nitrogens, not through delocalized π electrons. Furthermore, after comparing the AR-XPS spectra of finger arrays preclosed before exposure to BPE with the spectra of arrays that closed after exposure to BPE, we observed in the latter case, at grazing takeoff angles, an increase in the component of the nitrogen photoelectron peak associated with pyridyl nitrogen atoms residing on bridging sites. These results demonstrate that a small percentage of BPE molecules was trapped between the neighboring gold finger tips during the finger closing process. However, because these trapped BPE molecules coincidently resided in the hot spots formed among the touching finger tips, the substantial increase in the observed SERS signal was dominated by the contribution from this small minority of BPE molecules.     

Controlled fabrication of nanopillar arrays as active substrates for surface-enhanced Raman spectroscopy

Highly ordered gold nanopillar arrays were fabricated using anodized aluminum oxide (AAO) templates. Nanopillars with a dimension of 110 +/- 15 nm in vertical height and 75 +/- 10 nm in base diameter were formed with a density of 150 microm(-2). The ordered nanopillar arrays give reproducible surface-enhanced Raman scattering (SERS) at a detection limit of 10(-8) M using thionine as probing molecules. The enhancement by the Au nanopillar arrays was comparable with or better than that of dispersed gold nanoparticle SERS substrates. This work demonstrates a new technique for producing highly ordered and reproducible SERS substrates potentially applicable for chemical and biological assay.     

High-yield synthesis of multi-branched gold nanoparticles and their surface-enhanced Raman scattering properties

Multi-branched gold nanoparticles were synthesized in high-yield through the reduction of HAuCl(4) by using hydrazine as a reducing agent. Practically 100% of the particles have numerous branches. The high reduction capability of hydrazine is found to be crucial for the formation of these branched gold nanoparticles. Their size can be controlled from 20 to 130 nm by varying the amounts of hydrazine. The prepared nanoparticles exhibit efficient surface-enhanced Raman scattering (SERS) properties and the SERS activity of the particles depends on the aspect ratio of their branches, which are most likely related to a great increase in the localized electromagnetic field enhancement from their unique sharp surface features arising from the branches.     

Green synthesis of Au nanoparticles immobilized on halloysite nanotubes for surface-enhanced Raman scattering substrates

A facile and green route was introduced to synthesize Au nanoparticles immobilized on halloysite nanotubes (AuNPs/HNTs) used for surface-enhanced Raman scattering substrates. The naturally occurring HNTs were firstly functionalized with a large amount of -NH(2) groups by N-(β-aminoethyl)-γ-aminopropyl trimethoxysilane (AEAPTES), which possesses one lone electron pair and will "anchor" Au ions to form a chelate complex. Then, with the addition of tea polyphenols (TP), the Au ions were reduced on the surface of the previously formed Au-NH(2) chelate complex to form AuNPs. Transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE-SEM) observations indicate that a large amount of AuNPs were synthesized on HNTs. The AuNPs are irregularly spherical and densely dispersed on HNTs and the diameter of the nanoparticles varies from 20 to 40 nm. The interactions between AuNPs and -NH(2) groups were verified by X-ray photoelectron spectroscopy (XPS) and the results showed that the functional groups can "anchor" AuNPs through the chelating effect. The as-prepared AuNPs/HNTs nanomaterials with several nanometers gaps among nanoparticles were used as a unique surface-enhanced Raman scattering substrate, which possessed strong and distinctive Raman signals for R6G, indicating the remarkable enhancement effect of the AuNPs/HNTs.     

Functionalized gold nanoparticles as nanosensor for sensitive and selective detection of silver ions and silver nanoparticles by surface-enhanced Raman scattering

We have developed a surface-enhanced Raman scattering (SERS) nanosensor firstly for Ag ions and Ag nanoparticles detection based on 2-mercaptoisonicotinic acid (2MNA)-functionalized Au nanoparticles. Ag(+) can coordinate with 2MNA resutling in a variation of its SERS spectrum, which is used as a criterion to determine Ag(+) in a solution. This sensor exhibits a detection limit no more than 25 nM and has a high selectivity against other metal ions. More importantly, it can be directly applied in real sample detection.     

Labeled gold nanoparticles immobilized at smooth metallic substrates: systematic investigation of surface plasmon resonance and surface-enhanced Raman scattering

This paper experimentally and theoretically investigates the influence of an underlying metallic substrate (i.e., gold and silver) on the surface plasmon resonance (SPR) of labeled gold nanoparticles and the concomitant impact on the surface-enhanced Raman scattering (SERS) signal from the labels. These experiments employ nanoparticles of varied sizes (30-100 nm) that are coated with a bifunctional Raman scatterer composed of (1) a disulfide for chemisorption to the nanoparticle surface, (2) a succinimidyl ester for formation of a covalent linkage to an amine-terminated self-assembled monolayer on the underlying substrate, and (3) an aryl nitro group with an intrinsically strong Raman active vibrational mode. This approach allows facile systematic assessments of how variations in nanoparticle size, substrate composition, and the gap between the nanoparticle and substrate affect the SPR of the bound particles. Both UV-vis transmission and reflection absorption (incident angle of 58 degrees ) spectroscopy are used to characterize the effect of each of these parameters on SPR. These results are then correlated with SERS enhancement factors (EFs) that were determined by accounting for particle surface concentrations, which were measured by atomic force microscopy, and the absolute number of labels, which were calculated on the basis of the surface area of each of the different-sized particles. All SERS spectra were collected at an incident angle of 58 degrees with respect to the surface normal. As expected, the SPR for particles in solution red-shifts with increasing particle size. More importantly, the SPR moves to even longer wavelengths as the size of immobilized particles increases and as the gap between the immobilized particle and substrate decreases. The red shift is also greater for a gold nanoparticle tethered to a gold substrate compared to a silver substrate. A theoretical model for the extinction of a particle above a flat substrate, corrected for surface scattering, radiation damping, and dynamic depolarization, is also briefly detailed. SPR results calculated with the model are consistent with the shifts observed in the SPR position for each of the manipulated experimental variables. The largest EFs are found for samples with an SPR maximum (lambda(max)) between the wavelengths for laser excitation (633 nm) and the Raman band for the symmetric nitro stretch of the particle coating (690 nm). As an example, an order of magnitude in the SERS enhancement factor is gained for a 60-nm particle immobilized 1.2 nm above a gold substrate (SPR lambda(max) = 657 nm) compared to that for a 30-nm particle (SPR lambda(max) = 596 nm).     

Rapid detection of melamine with 4-mercaptopyridine-modified gold nanoparticles by surface-enhanced Raman scattering

A surface-enhanced Raman scattering (SERS) strategy based on 4-mercaptopyridine (MPY)-modified gold nanoparticles (AuNPs) was developed for the rapid and sensitive detection of melamine in milk powder. The SERS measurement of melamine strongly relied on the “hotspot” effect, in which AuNPs immediately aggregated upon the addition of melamine, leading to significantly enhanced Raman intensity of the reporter molecule MPY and a color change for the solution from red to blue-gray. The limit of detection based on a signal to noise of 3 (S/N = 3) was found to be as low as 0.1 ppb of melamine, with an excellent linearity of 0.5–100 ppb, demonstrating a higher sensitivity and a wider quantitation range than direct SERS sensing methods based on enhanced substrate. An impressive specificity for melamine detection over various common metal ions and excipients in dairy products, even at concentrations of 100-fold higher than melamine, was achieved. Good recoveries of 88.5% and 111.7% were obtained from milk samples spiked to 20 and 100 ppb levels, respectively. The proposed method is potentially applicable for the rapid in situ determination of melamine in complex matrices.     

Fabrication of flower-like silver nanoparticles for surface-enhanced Raman scattering

The flower-like silver nanoparticles have been synthesized by reducing silver nitrate (AgNO₃) with ascorbic acid (AA) as the reductant and polyvinyl pyrrolidone (PVP) as the capping agent under vigorous stirring. Such flower-like nanoparticles are aggregates of small nanoplates and nanorods. They were tested as substrates for the surface-enhanced Raman scattering (SERS), showing high sensitivity for detecting Rhodamine 6G (R6G) at a concentration as low as 10^-7 mol/L. It has been found that replacing mechanical stirring with ultrasound sonication would drastically change the particle morphology, from flower-like nanoparticles to well-dispersed smaller nanoparticles. Furthermore, when trace amounts of NaCl were added into the reagents, well-dispersed Ag nanoparticles formed even in vigorous stirring. These phenomena can be explained with the diffusion and reactant supply during nucleation and growth of Ag nanoparticles.     

Phospholipid membrane encapsulation of nanoparticles for surface-enhanced Raman scattering

Lipid-encapsulated surface-enhanced Raman scattering (SERS) nanoparticles, with promising applications in biomedical diagnostics, were produced. Gold nanoparticles, 60 nm in diameter, were coated with a ternary mixture of DOPC, sphingomyelin, and cholesterol. The lipid layer is versatile for engineering the chemical and optical properties of the particles. The stability of the lipid-encapsulated particles is demonstrated over a period of weeks. The versatility of the layer is demonstrated by the incorporation of three different Raman-active species using three different strategies. The lipid layer was directly observed by TEM, and the SERS spectrum of the three dye species was confirmed by Raman spectroscopy. UV-vis absorption and dynamic light scattering provide additional evidence of lipid encapsulation. The encapsulation is achieved in aqueous solution, avoiding phase transfer and possible contamination from organic solvents. Furthermore, when fluorescent dye-labeled lipids were employed in the encapsulant, the fluorescence and SERS activity of the particles were controlled by the use of dissolved ions in the preparation solution.     

Surfactantless photochemical deposition of gold nanoparticles on an optical fiber core for surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) probes based on gold nanoparticles modifying the core of the optical fiber were made by a surfactantless photochemical deposition method. The growth kinetics and shape evolution of gold nanoparticles depending on different experimental conditions were studied. It was found that, under the condition of detectable gold nanoparticle deposition, increasing the concentration of chloroauric acid (HAuCl(4)) was not conducive to the deposition whereas increasing the concentration of sodium citrate (Na(3)Ct) would speed up the deposition. By controlling the concentration of the reaction solution and irradiation time, we obtained fused spherical-like, spherical, and flowerlike gold nanoparticles. To test the SERS activity of the probes, the SERS spectra of a rhodamine 6G aqueous solution were recorded in direct detection mode and remote mode. We have also developed a new approach to improving the SERS sensitivity when detecting in remote mode.     

Gold nanoparticle embedded, self-sustained chitosan films as substrates for surface-enhanced Raman scattering

In this work, self-sustained, biocompatible, biodegradable films containing gold nanostructures have been fabricated for potential application in nanobioscience and ultrasensitive chemical and biochemical analysis. We report a novel synthesis of gold nanoparticles mediated by the biopolymer chitosan. Self-supporting thin films are formed from the resultant gold-chitosan nanocomposite solutions and characterized by UV-visible surface plasmon absorption, transmission electron microscopy, atomic force microscopy, infrared absorption, and Raman scattering measurements. Results demonstrate control over the size and distribution of the nanoparticles produced, which is promising for several applications, including the development of biosensors. As a proof of principle, we demonstrate that gold-chitosan films can be employed in trace analysis using surface-enhanced Raman scattering.     

Nanoparticle-based substrates for surface-enhanced Raman scattering detection of bacterial spores

The development of ultrasensitive and rapid methods for the detection of bacterial spores is important for medical diagnostics of infectious diseases. While Surface-Enhanced Raman Spectroscopic (SERS) techniques have been increasingly demonstrated for achieving this goal, a key challenge is the development of sensitive and stable SERS substrates or probes. This Minireview highlights recent progress in exploring metal nanoparticle-based substrates, especially gold nanoparticle-based substrates, for the detection of biomarkers released from bacterial spores. One recent example involves assemblies of gold nanoparticles on a gold substrate for the highly sensitive detection of dipicolinic acid (DPA), a biomarker for bacterial spores such as Bacillus anthracis. This type of substrate exploits a strong SERS effect produced by the particle-particle and particle-substrate plasmonic coupling. It is capable of accurate speciation of the biomarker but also selective detection under various reactive or non-reactive conditions. In the case of detecting Bacillus subtilis spores, the limit of detection is quite comparable (0.1 ppb for DPA, and 1.5 × 10(9) spores per L (or 2.5 × 10(-14) M)) with those obtained using silver nanoparticle-based substrates. Implications of the recent findings for improving the gold nanoparticle-based SERS substrates with ultrahigh sensitivity for the detection of bacterial spores are also discussed.     

Photochemical decoration of silver nanoparticles on magnetic microspheres as substrates for the detection of adenine by surface-enhanced Raman scattering

In this work, silver nanoparticles (AgNPs) decorated magnetic microspheres (MMs) are prepared as surface-enhanced Raman scattering (SERS) substrate for the analysis of adenine in aqueous solutions. To prepare these substrates, magnetic particles were first synthesized by coprecipitation of Fe(II) and Fe(III) with ammonium hydroxide. A thin layer of cross-linked polymer was formed on these magnetic particles by polymerization through suspension of magnetic particles into a solution of divinyl benzene/methyl methacrylate. The resulted polymer protected magnetic particles are round in shape with a size of 80 μm in diameter. To form AgNPs on these MMs, photochemical reduction method was employed and the factors in photochemical reduction method were studied and optimized for the preparation of highly sensitive and stable AgNPs on MMs substrates (abbreviated as AgMMs substrates). By dispersing the AgMMs in aqueous samples, cylindrical magnet was used to attract the AgMMs for SERS detections. The observed enhancement factor of AgMMs reached 7 orders in magnitude for detection of adenine with a detection limit approaching to few hundreds of nanomolar.     

Detection of human serum albumin through surface-enhanced Raman scattering using gold "pearl necklace" nanomaterials as substrates

We describe a surface-enhanced Raman scattering (SERS)-based sensor for the detection of human serum albumin (HSA) using gold "pearl necklace" nanomaterials (Au PNNs) as the substrate and AB 580 as the reporter.