Interaction of formic acid with solid water

The interaction of formic acid (HCOOH) with solid water, deposited on tungsten at 80 K, was investigated. We have prepared and annealed formic acid (FA)/water interfaces (FA layers on thin films of solid water and H(2)O adlayers on thin FA films). Metastable impact electron spectroscopy and ultraviolet photoemission spectroscopy (He I and II) were utilized to study the electron emission from the 10a' to 6a' molecular orbitals (MOs) of FA, and the 1b(1), 3a(1), and 1b(2) MOs of H(2)O. These spectra were compared with results of density-functional theory calculations on FA-H(2)O complexes reported in Ref. 14 [A. Allouche, J. Chem. Phys. 122, 234703(2005), (preceding paper)]. Temperature programmed desorption was applied for information on the desorption kinetics. Initially, FA is adsorbed on top of the water film. The FA spectra are distorted with respect to those from FA monomers; it is concluded that a strong interaction exists between the adsorbates. Even though partial solvation of FA species takes place during annealing, FA remains in the top layer up to the desorption of the water film. When H(2)O molecules are offered to FA films at 80 K, no water network is formed during the initial stage of water exposure; H(2)O molecules interact individually via H bonds with the formic acid network. Experiment and theory agree that no water-induced deprotonation of the formic acid molecules takes place.     

Solvent‐free polymerization of citric acid and hexamethylenediamine for novel carboxylated polyamides

Copolymers of tributyl citrate (TBC) and hexamethylenediamine (HMDA) were synthesized with a solvent‐free condensation method with molar ratios of TBC to HMDA varying from 2:1 to 1:2. The reaction led to poly(succinimide‐co‐citramide) copolymers which were characterized by infrared and Raman spectroscopies, X‐ray diffraction, and thermal analyses. Hydrolysis of the copolymers resulted in water soluble polycitramides with number averaged molecular weights ranging from 1.16 × 10⁴ to 5.00 × 10³ as determined by gel permeation chromatography. ¹H, ¹³C, and ¹³C‐¹H‐heteronuclear single quantum coherence NMR spectroscopy has confirmed that the hydrolyzed polycitramides with COOH side chains and amide backbones are structurally similar to biodegradable poly(aspartic acid) (PASP). Interestingly, the polycitramides showed Ca²⁺ and Pb²⁺ ion chelating capabilities higher than PASP, citric acid–sorbitol copolymers, or conventional resins. Thus, the polycitramides offer promise as a totally new class of metal sequesters and renewable substitutes for PASP and poly(acrylic acid). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

溶剂诱导的聚乳酸/聚乳酸衍生物共结晶行为

通过溶液浇铸法制备不同组分的左旋聚乳酸(PLLA)和聚(L-2-羟基-3-甲基丁酸)(PL-2H3MB)共混物.运用差示扫描量热仪(DSC)、偏光显微镜(POM)、广角X射线衍射(WAXD)和热重分析仪(TGA)分析共混物的结晶、熔融行为和热稳定性.通过观察到DSC加热曲线中新的熔融峰判断PLLA和PL-2H3MB共晶...     

Solubility of acetic acid and trifluoroacetic acid in low-temperature (207-245 k) sulfuric acid solutions: implications for the upper troposphere and lower stratosphere

The solubility of gas-phase acetic acid (CH(3)COOH, HAc) and trifluoroacetic acid (CF(3)COOH, TFA) in aqueous sulfuric acid solutions was measured in a Knudsen cell reactor over ranges of temperature (207-245 K) and acid composition (40-75 wt %, H(2)SO(4)). For both HAc and TFA, the effective Henry's law coefficient, H*, is inversely dependent on temperature. Measured values of H* for TFA range from 1.7 × 10(3) M atm(-1) in 75.0 wt % H(2)SO(4) at 242.5 K to 3.6 × 10(8) M atm(-1) in 40.7 wt % H(2)SO(4) at 207.8 K. Measured values of H* for HAc range from 2.2 × 10(5) M atm(-1) in 57.8 wt % H(2)SO(4) at 245.0 K to 3.8 × 10(8) M atm(-1) in 74.4 wt % H(2)SO(4) at 219.6 K. The solubility of HAc increases with increasing H(2)SO(4) concentration and is higher in strong sulfuric acid than in water. In contrast, the solubility of TFA decreases with increasing sulfuric acid concentration. The equilibrium concentration of HAc in UT/LS aerosol particles is estimated from our measurements and is found to be up to several orders of magnitude higher than those determined for common alcohols and small carbonyl compounds. On the basis of our measured solubility, we determine that HAc in the upper troposphere undergoes aerosol partitioning, though the role of H(2)SO(4) aerosol particles as a sink for HAc in the upper troposphere and lower stratosphere will only be discernible under high atmospheric sulfate perturbations.     

Heterogeneous uptake and reactivity of formic acid on calcium carbonate particles: a Knudsen cell reactor, FTIR and SEM study

The heterogeneous uptake and reactivity of formic acid (HCOOH), a common gas-phase organic acid found in the environment, on calcium carbonate (CaCO(3)) particles have been investigated using a Knudsen cell reactor, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). FTIR measurements show that the adsorption of formic acid on the surface of calcium carbonate results in the formation of calcium formate. Besides calcium formate, carbonic acid is also a reaction product under dry conditions (<1% RH). Under dry conditions and at low pressures, the initial uptake coefficient of formic acid on CaCO(3) particles is measured to be 3 +/- 1 x 10(-3) and decreases as the surface saturates with adsorbed products. The maximum surface coverage of formic acid under dry conditions is determined to be (3 +/- 1)x 10(14) molecules cm(-2). Under humidified conditions (RH >10%), adsorbed water on the surface of the carbonate particles participates in the surface reactivity of these particles, which results in the enhanced uptake kinetics and extent of reaction of this organic acid on CaCO(3) as well as opens up several new reaction pathways. These reaction pathways include: (i) the water-assisted dissociation of carbonic acid to CO(2) and H(2)O and (ii) the formation of calcium formate islands and crystallites, as evident by SEM images. The results presented here show that adsorbed water plays a potentially important role in the surface chemistry of gas-phase organic acids on calcium carbonate particles.     

Preparation of a carbon-based solid acid catalyst by sulfonating activated carbon in a chemical reduction process

Sulfonated (SO(3)H-bearing) activated carbon (AC-SO(3)H) was synthesized by an aryl diazonium salt reduction process. The obtained material had a SO(3)H density of 0.64 mmol·g-1 and a specific surface area of 602 m2·g-1. The catalytic properties of AC-SO(3)H were compared with that of two commercial solid acid catalysts, Nafion NR50 and Amberlyst-15. In a 10-h esterification reaction of acetic acid with ethanol, the acid conversion with AC-SO(3)H (78%) was lower than that of Amberlyst-15 (86%), which could be attributed to the fact that the SO(3)H density of the sulfonated carbon was lower than that of Amberlyst-15 (4.60 mmol·g-1). However, AC-SO(3)H exhibited comparable and even much higher catalytic activities than the commercial catalysts in the esterification of aliphatic acids with longer carbon chains such as hexanoic acid and decanoic acid, which may be due to the large specific surface area and mesoporous structures of the activated carbon. The disadvantage of AC-SO(3)H is the leaching of SO(3)H group during the reactions.     

Mn2+ complexes of 1-oxa-4,7-diazacyclononane based ligands with acetic, phosphonic and phosphinic acid pendant arms: stability and relaxation studies

A new class of macrocyclic ligands based on 1-oxa-4,7-diazacyclononane was synthesized and their Mn(2+) complexes were investigated with respect to stability and relaxation properties. Each ligand has two pendant arms involving carboxylic (H(2)L(1)--1-oxa-4,7-diazacyclononane-4,7-diacetic acid), phosphonic (H(4)L(2)--1-oxa-4,7-diazacyclononane-4,7-bis(methylenephosphonic acid)), phosphinic (H(2)L(3)--1-oxa-4,7-diazacyclononane-4,7-bis(methylenephosphinic acid)) or phenylphosphinic (H(2)L(4)--1-oxa-4,7-diazacyclononane-4,7-bis[methylene(phenyl)phosphinic acid]) acid moieties. H(2)L(3) and H(2)L(4) were synthesized for the first time. The crystal structure of the Mn(2+) complex with H(2)L(4) confirmed a coordination number of 6 for Mn(2+). The protonation constants of all ligands and the stability constants of their complexes with Mn(2+) and some biologically or biomedically relevant metal ions were determined by potentiometry. The protonation sequence of H(2)L(3) was followed by (1)H and (31)P NMR titration and the second protonation step was attributed to the second macrocyclic nitrogen atom. The potentiometric data revealed a relatively low thermodynamic stability of the Mn(2+) complexes with all ligands investigated. For H(2)L(3) and H(2)L(4), full Mn(2+) complexation cannot be achieved even with 100% ligand excess. The transmetallation of MnL(1) and MnL(2) with Zn(2+) was too fast to be followed at pH 6. Variable temperature (1)H NMRD and (17)O NMR measurements have been performed on MnL(1) and MnL(2) to provide information on water exchange and rotational dynamics. The (17)O chemical shifts indicate hydration equilibrium between mono- and bishydrated species for MnL(1), while MnL(2) is monohydrated. The water exchange is considerably faster on MnL(1) (k(ex)(298) = 1.2 × 10(9) s(-1)) than on MnL(2) (k(ex)(298) = 1.2 × 10(7) s(-1)). Small endogenous anions (phosphate, carbonate, citrate) do not replace the coordinated water in either of the complexes, but they induce their slow decomposition. All Mn(2+) complexes are stable toward air-oxidation.     

磺酸基团功能化的碳-硅介孔复合材料的制备及其在生物柴油绿色合成中的应用(英文)

利用化学浸渍法将蔗糖负载到 SBA-15 介孔材料孔道内部, 高温炭化形成的多聚苯环经发烟硫酸气相磺化处理后, 得到磺酸基团功能化的新型碳-硅介孔复合材料. 发烟硫酸气相磺化处理是该材料合成的关键步骤. X 射线衍射、扫描电镜和氮气吸附结果表明, 碳-硅介孔复合材料经磺酸化处理保持了高度有序的介孔结构. 热重、傅里叶变换的红外光谱及吡啶吸附红外光谱结果证明, 磺酸功能基团成功的嫁接于碳-硅介孔复合材料孔道的内表面, 反应活性中心为 Br?nsted 酸, 酸密度在 0.09~0.70 mmol/g 可以有效调变. 当碳负载量为 35% 时, 该复合材料在生物柴油的绿色合成中显示出最优的催化性能, 且可重复使用 3 次以上.     

Anhydrous proton-conducting properties of triazole-phosphonic acid copolymers: a combined study with MAS NMR

The synthesis, thermal and proton conducting properties of copolymers based on vinylphosphonic acid (VPA) and 1-vinyl-1,2,4-triazole (VTri) were investigated. The copolymers were synthesized by free-radical copolymerization of the corresponding monomers at several monomer feed ratios to obtain poly(VPA-co-VTri) copolymer electrolytes. The final structures of the copolymers were confirmed by spectroscopic methods. The composition of the low molecular weight copolymers was varied with the feed ratio of the monomers. The presence of triazole units in the copolymers suppresses the formation of phosphonic acid anhydrides up to 150 degrees C, as verified by both (31)P NMR and TGA. The observation of defined glass transition temperatures indicated that the ionic interactions do not prevent segmental relaxations of the polymer chains. In the absence of humidity, the copolymer electrolyte, poly(VPA-co-VTri), S2 (with 33% triazole content) showed proton conductivity of 10(-3) S cm(-1) at 120 degrees C, which is far higher than in imidazole based copolymers. Two different types of hydrogen-bonded protons were detected by (1)H MAS NMR in the solid copolymer systems, due to different arrangements of triazole and phosphonic acid units.     

<Superscript>1</Superscript>H NMR spectra of water contained in solutions of poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone) and its modification products in CDCl<Subscript>3</Subscript>

¹H NMR spectra in CDCl₃ of poly(N-vinylpyrrolidone), epoxidized poly(N-vinyl-pyrrolidone), and products derived from the latter by modification with amino acids (glycine, β-alanine, γ-aminobutyric acid, and ε-aminocaproic acid) were examined. The ¹H NMR spectra of the modified polymers contain signals for water protons due to different centers of water sorption. These signals differ in chemical shift and integral intensity and indicate a changed spatial packing of the polymer as the result of its modification. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2377–2380, October, 2005.     

A novel synthesis of acrylic acid containing polymers

A novel synthesis of linear acrylic acid containing polymers, poly(styrene-co-acrylic acid) and poly(acrylic acid), was accomplished through hydrolysis of the respective parent polymers, i.e. poly(styrene-co-methyl acrylate) and poly(methyl acrylate), with trimethylsilyl iodide under mild conditions. Combination of ¹H NMR, ¹³C NMR, FTIR, DSC and chemical titration confirms that the conversion from methoxycarbonyl to carboxyl is almost complete. This method is further successfully applied to synthesize poly-(ethyl methacrylate-co-acrylic acid) through selective hydrolysis of the methyl acrylate units in poly(ethyl methacrylate-co-methyl acrylate).     

Syntheses and some fluorescence properties of poly(2-methacrylamido-3-arylpropionic acid)

2-Methacrylamido-3-arylpropionic acid, where aryl is 1-naphthyl (M1NpPA), 2-naphthyl (M2NpPA), or 1-pyrenyl (M1PyPA), was synthesized. Free radical polymerization gave polymers which were soluble in water at pH > 6. In aqueous solution, poly(M1NpPA) and poly(M2NpPA) exhibited strong excimer fluorescence as a dominant component, whereas poly(M1PvPA) showed weak monomer fluorescence as a main component. Excitation spectra and fluorescence quenching by Tl⁺ ions suggested that naphthyl groups in poly(M1NpPA) and poly(M2NpPA) interacted so as to form excimer sites, by which migrating excited singlets were trapped, leading to the strong excimer emission. It was suggested, however, that pyrenyl groups in poly(M1PyPA) were sterically so constrained that they could not attain the full-overlap excimer conformation but could only interact to form self-quenching sites, to which energy migration occurred, leading to weak fluorescence. © 1993 John Wiley & Sons, Inc.     

Lipase-catalyzed transformation of poly(lactic acid) into cyclic oligomers

Enzymatic transformations into cyclic oligomers were carried out with the objective of developing chemical recycling of poly(lactic acid)s, such as poly(D,L-lactic acid) (PDLLA), poly(D-lactic acid) (PDLA) and poly(L-lactic acid) (PLLA), which are typical biodegradable polymers. They were degraded by lipase in an organic solvent to produce the corresponding cyclic oligomer with a molecular weight of several hundreds. PDLLA (with a Mw of 84,000) was quantitatively transformed into cyclic oligomers by lipase RM (Lipozyme RM IM) in chloroform/hexane at 60 degrees C. PLLA (with a Mw of 120,000) was transformed into cyclic oligomer by lipase CA (Novozym 435) at a higher temperature of 100 degrees C in o-xylene. The oligomer structure was identified by 1H and 13C NMR spectroscopy and MALDI-TOF (matrix assisted laser desorption/ionization-time-of-flight) mass spectrometry.     

Cr改性钒基催化剂对NH3低温选择性催化还原NOx的影响

火电厂和机动车辆等的NOx排放量与日俱增, NOx的治理已成为环境保护的重要组成部分.以NH3作为还原剂的选择性催化还原(SCR)技术是目前消除NOx最为高效的方法之一.该反应最为典型的催化剂是V2O5–WO3(MoO3)/TiO2,催化活性窗口为250–400 oC.国外通常将SCR系统置于省煤器之后,此时烟气温度在300 oC以上,催化剂能保持较高的活性,但易受到烟气中高浓度烟尘、SO2和碱金属等的影响,寿命相对较短.此外,高温工艺中副产物硫酸铵的堵塞也是一个不可忽视的问题.因此,将SCR脱硝装置设在脱硫除尘之后成为一种优选技术之一,但烟气温度会降至250 oC以下,而常规的钒基催化剂不能满足低温活性要求.通过添加助剂或改变载体可改善钒基催化剂的低温活性,同时保持其高效的抗硫能力.
　　本文以Cr和V为活性组分, TiO2为载体,采用浸渍法制备了铬钒钛(Cr–VOx/TiO2)系列催化剂,考察了它们的低温脱硝活性和抗水抗硫性,并通过N2吸附-脱附、X射线衍射、NH3程序升温脱附(NH3-TPD)、H2程序升温还原(H2-TPR)和X射线光电子能谱等手段对催化剂进行了表征,分析了Cr–V催化剂的作用机制.
　　结果显示,当n(Cr)：n(V)为0.2：0.8,活性组分负载量为10 wt%时, Cr–VOx/TiO2催化剂表现出最佳的低温催化活性;当反应温度为160°C时, NOx转化率达到90%以上,明显优于其他催化剂,同时活性窗口(160–300°C)得到拓宽. NH3-TPD结果表明, VOx/TiO2催化剂表面呈中弱酸性,随着Cr的添加,钒基催化剂的NH3脱附峰向高温拓宽,说明其表面强酸量有所增加, Cr0.2–V0.8/TiO2在160–300°C范围内均出现了NH3的脱附峰,此时催化剂表面弱酸量最大.当n(Cr)：n(V)大于0.2：0.8时,催化剂表面出现强酸位,这种强酸位不利于NH3脱附,从而不利于SCR反应的进行.因此适量Cr的添加有助于提高钒基催化剂表面弱酸及中性酸量. H2-TPR结果发现,助剂Cr的添加使得催化剂表面氧量增加,这可能是由于Cr的添加形成了较多的氧空穴和未饱和的化学键.催化剂表面化学吸附氧是氧化还原反应最活跃的氧物种,在SCR反应中,表面氧可作为NO的吸附介质参与到催化剂表面反应中,可有效提高SCR反应速率.通过考察活性组分负载量对催化剂活性的影响,发现不同负载量催化剂的催化活性依次为10 wt%>20 wt%>50 wt%>5 wt%. XPS分析发现,当负载量为10 wt%时,催化剂表面非计量的钒离子和化学性质活跃的自由电子最多,因此表现出最佳的SCR活性;当负载量过高时,大量氧化物堆积烧结形成V2O5和Cr2V4O13,覆盖了钒离子活性位点,降低了催化剂脱硝效率.
　　催化剂在220°C表现出良好的抗硫性,在通入100 ppm SO212 h后NOx的转化率仍可达99%以上,并未出现硫中毒现象.同时该催化剂也表现出较好的抗水性,在通入10 vol%水蒸气12 h后, NOx转化率仍能达85%以上.     

Synthesis and characterization of polylactic acid (PLA) using a solid acid catalyst system in the polycondensation method

In this study, synthesis of poly(l(+) lactic acid) was carried out by using an acid catalyst. Neat chlorosulfonic acid reacts with cellulose to give cellulose sulfuric acid in which sulfuric acid is immobilized on the cellulose surface via bond formation. Cellulose sulfuric acid was used as a catalyst in a quantity of 1.0 wt.% calculated on the monomer. Polycondensation was carried out over a period of 24 h. The resulting poly(l(+) lactic acid) was characterized by Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) thermogravimetric analysis (TGA), ¹H and ¹³C nuclear magnetic resonance (NMR), and gel permeation chromatography. The molecular weight of poly(l-lactic acid) reached as high as 14,875.     

Calibration of a chemical ionization mass spectrometer for the measurement of gaseous sulfuric acid

The accurate measurement of the gaseous sulfuric acid concentration is crucial within many fields of atmospheric science. Instruments utilizing chemical ionization mass spectrometry (CIMS) measuring H(2)SO(4), therefore, require a careful calibration. We have set up a calibration source that can provide a stable and adjustable concentration of H(2)SO(4). The calibration system initiates the production of sulfuric acid through the oxidation of SO(2) by OH. The hydroxyl radical is produced by UV photolysis of water vapor. A numerical model calculates the H(2)SO(4) concentration provided at the outlet of the calibration source. From comparison of this concentration and the signals measured by CIMS, a calibration factor is derived. This factor is evaluated to be 1.1 × 10(10) cm(-3), which is in good agreement with values found in the literature for other CIMS instruments measuring H(2)SO(4). The calibration system is described in detail and the results are discussed. Because the setup is external to the CIMS instrument, it offers the possibility for future CIMS intercomparison measurements by providing defined and stable concentrations of sulfuric acid.     

Characterization of maleic acid/anhydride copolymer films by low-rate dynamic liquid-fluid contact angle measurements using axisymmetric drop shape analysis

Thin films of alternating maleic acid/anhydride copolymers (poly(octadecene-alt-maleic acid/anhydride), POMA; poly(propene-alt-maleic acid/anhydride), PPMA; poly(styrene-alt-maleic acid/anhydride), PSMA) were studied to unravel the influence of the comonomer characteristics in the backbone on the surface-energetic properties of the copolymer films in the dry state and in contact with aqueous solutions. Water contact angle measurements revealed a graduation of the wettability of the dry hydrolyzed and annealed copolymer films that was dependent on the comonomer unit. It ranged from moderately hydrophilic (PPMA, annealed gamma(sv) = 39.9 mJ/m2) to very hydrophobic (POMA, annealed, gamma(sv) = 18.4 mJ/m2) surfaces. Liquid-fluid contact angle measurements using captive air bubbles were performed in different aqueous media (pure water, phosphate-buffered saline, and 10(-)(3) M KCl of two different pH values (pH = 3 and pH = 10) to study the copolymer films in their hydrated states relevant for biointerfacial phenomena. It was found that the graduation of the wettability of the copolymer films in the dry state is overall maintained upon immersion in aqueous solutions. The dependence of the wettability on the pH value of the aqueous medium could be related to the (de)protonation of the carboxylic groups.     

Deliberately designed processes to physically tether the carboxyl groups of poly(pentacosadiynoic acid) to a poly(vinyl alcohol) glassy matrix to make poly(pentacosadiynoic acid) thermochromically reversible in the matrix

In this article, we demonstrate that by tethering carboxyl groups of poly(10,12-pentacosadiynoic acid) (PDA) to a poly(vinyl alcohol) (PVA) matrix, PDA, which is irreversible in its pure form, becomes reversible in the thermochromism. The tethering is realized by simple but deliberately designed processes: (1) Disperse the commercially available monomer 10,12-pentacosadiynoic acid (DA) nanocrystals in a PVA aqueous solution by the "NCCM" method invented in our laboratory. (2) Anneal and dry the mixture solution at a temperature higher than the melting point of pure DA crystal. (3) Polymerize the as-annealed DA/PVA blend films by UV irradiation. After the polymerization, PDA/PVA films with completely reversible thermochromism are obtained. The reversible PDA/PVA films can be easily dissolved in water, leading to water-dispersible nanoaggregates with the reversibility. Blends of PDA with other water-soluble polymers such as poly(ethylene oxide) (PEO), poly(acrylic acid) (PAA) and poly(allyamine) (PAM), were prepared respectively, by the same processes and under the same conditions. It is found that all these nanocomposites are irreversible or partially reversible in the thermochromism; either the relatively low glassy transition temperature of the polymer matrix (in the case of PEO) or the partial ionization nature of the polymer (in the cases of PAA and PAM) is responsible for the irreversibility or the partial reversibility.     

Interaction of acetic acid with solid water

The interaction of acetic acid (AA, CH(3)COOH), with solid water, deposited on metals, tungsten and gold, at 80 K, was investigated. We have prepared acid/water interfaces at 80 K, namely, acid layers on thin films of solid water and H(2)O adlayers on thin acid films; they were annealed between 80 and 200 K. Metastable impact electron spectroscopy (MIES) and ultraviolet photoelectron spectroscopy UPS(HeII) were utilized to obtain information on the electronic structure of the outermost surface from the study of the electron emission from the weakest bound MOs of the acids, and of the molecular water. Temperature-programmed desorption (TPD) provided information on the desorption kinetics, and Fourier-transformed infrared spectroscopy (FTIR) provided information on the identification of the adsorbed species as well as on the water and acid crystallization. The results are compatible with the finding of ref 1 (preceding paper), made on the basis of DFT calculations, that AA adsorbs on ice as cyclic dimers. Above 120 K, a rearrangement of the AA dimers is suggested by a sharpening of the spectral features in the IR spectra and by spectral changes in MIES and UPS; this is attributed to the glass transition in AA around 130 K. Above 150 K the spectra transform into those characteristic for polycrystalline polymer chains. This structure is stable up to about 180 K; desorption of water takes place from underneath the AA film, and practically all water has desorbed through the AA film before AA desorption starts. There is no indication of water-induced deprotonation of the acid molecules. For the interaction of H(2)O molecules adsorbed on amorphous AA films, the comparison of MIES with the DFT results of ref 1 shows that the initial phase of exposure does not lead to the formation of a top-adsorbed closed water film at 80 K. Rather, the H(2)O molecules become attached to or incorporated into the preexisting AA network by H bonding; no water network is formed in the initial stage of the water adsorption. Also under these conditions no deprotonation of the acid can be detected.     

Kinetic and equilibrium study on formic acid decomposition in relation to the water-gas-shift reaction

Kinetics and equilibrium are studied on the hydrothermal decarbonylation and decarboxylation of formic acid, the intermediate of the water-gas-shift (WGS) reaction, in hot water at temperatures of 170-330 degrees C, to understand and control the hydrothermal WGS reaction. (1)H and (13)C NMR spectroscopy is applied to analyze as a function of time the quenched reaction mixtures in both the liquid and gas phases. Only the decarbonylation is catalyzed by HCl, and the reaction is first-order with respect to both [H(+)] and [HCOOH]. Consequently, the reaction without HCl is first and a half (1.5) order due to the unsuppressed ionization of formic acid. The HCl-accelerated decarbonylation path can thus be separated in time from the decarboxylation. The rate and equilibrium constants for the decarbonylation are determined separately by using the Henry constant (gas solubility data) for carbon monoxide in hot water. The rate constant for the decarbonylation is 1.5 x 10(-5), 2.0 x 10(-4), 3.7 x 10(-3), and 6.3 x 10(-2) mol(-1) kg s(-1), respectively, at 170, 200, 240, and 280 degrees C on the liquid branch of the saturation curve. The Arrhenius plot of the decarbonylation is linear and gives the activation energy as 146 +/- 3 kJ mol(-1). The equilibrium constant K(CO) = [CO]/[HCOOH] is 0.15, 0.33, 0.80, and 4.2, respectively, at 170, 200, 240, and 280 degrees C. The van't Hoff plot results in the enthalpy change of DeltaH = 58 +/- 6 kJ mol(-1). The decarboxylation rate is also measured at 240-330 degrees C in both acidic and basic conditions. The rate is weakly dependent on the solution pH and is of the order of 10(-4) mol kg(-1) s(-1) at 330 degrees C. Furthermore, the equilibrium constant K(CO2) = [CO(2)][H(2)]/[HCOOH] is estimated to be 1.0 x10(2) mol kg(-1) at 330 degrees C.