Utilization of 3'-carboxy-containing tyrosine derivatives as a new class of phosphotyrosyl mimetics in the preparation of novel non-phosphorylated cyclic peptide inhibitors of the Grb2-SH2 domain

A new class of phosphotyrosyl (pTyr) mimetics, distinct from the conventional pTyr mimetic design of adding non-hydrolyzable acidic functionalities to the 4'-position of phenylalanine, was created by introducing carboxy-containing groups to the 3'-position of tyrosine. The effect of the chain length of the carboxy substituent was examined. Reported herein is the chiral pool synthesis of the new pTyr mimetics, and their first use in a novel non-phosphorylated Grb2-SH2 domain binding motif with the 5-amino-acid sequence Xx1-Leu-(3'-substituted-Tyr)-Ac6c-Asn. The highest affinity was exhibited by the 3-L-(2-carboxyethyl)tyrosine-containing sulfoxide-cyclized peptide , with an IC50 = 1.1 microM, providing a promising new template for further development of potent Grb2-SH2 domain inhibitors with reduced charge and peptidic nature, but improved selectivity and bioavailability.     

A new type of excited-state intramolecular proton transfer: proton transfer from phenol OH to a carbon atom of an aromatic ring observed for 2-phenylphenol

The photochemical deuterium incorporation at the 2'- and 4'-positions of 2-phenylphenol (4) and equivalent positions of related compounds has been studied in D(2)O (CH(3)OD)-CH(3)CN solutions with varying D(2)O (CH(3)OD) content. Predominant exchange was observed at the 2'-position with an efficiency that is independent of D(2)O (MeOD) content. Exchange at the 2'-position (but not at the 4'-position) was also observed when crystalline samples of 4-OD were irradiated. Data are presented consistent with a mechanism of exchange that involves excited-state intramolecular proton transfer (ESIPT) from the phenol to the 2'-carbon position of the benzene ring not containing the phenol, to generate the corresponding keto tautomer (an o-quinone methide). This is the first explicit example of a new class of ESIPT in which an acidic phenolic proton is transferred to an sp(2)-hybridized carbon of an aromatic ring. The complete lack of exchange observed for related substrates 6-9 and for planar 4-hydroxyfluorene (10) is consistent with a mechanism of ESIPT that requires an initial hydrogen bonding interaction between the phenol proton and the benzene pi-system. Similar exchange was observed for 2,2'-biphenol (5), suggesting that this new type of ESIPT is a general reaction for unconstrained 2'-aryl-substituted phenols and other related hydroxyarenes.     

哌啶酮催化氢化制备哌啶醇催化剂的研究

研究了2,2,6,6-四甲基-哌啶酮-4-催化氢化合成2,2,6,6-四甲基-哌啶醇-4。重点研究催化剂种类对催化反应的影响。确定RaneyNi(4)为最适宜催化剂,并对其最佳用量进行了研究。对哌啶酮催化氢化的反应历程进行了探讨。选用常压塔式反应器进行氢化。对其它有关工艺参数进行研究,确定最佳条件:哌啶酮浓度为30%,20%异丙醇水溶液为溶剂、催化剂用量为20%、温度为80℃、时间为2h,哌啶醇产率97.3%,m.p.130.0-131.0℃。     

Lignans from Linum species of sections Syllinum and Linum

The aryltetralin lignans 6-methoxypodophyllotoxin, 5'-demethoxy-6-methoxypodophyllotoxin as well as the corresponding 8'-epimers 6-methoxypicropodophyllin, and 5'-demethoxy-6-methoxypicropodophyllin were isolated from suspension cultures of Linum cariense, and 4'-demethyl-6-methoxypodophyllotoxin together with 6-methoxypodophyllotoxin from plants of L. tauricum, which both belong to section Syllinum of the genus Linum. Cell cultures of L. altaicum, L. austriacum ssp. euxinum and L. lewisii belonging to section Linum accumulate the naphthalene lignans justicidin B and isojusticidin B. The different lignans were identified by HPLC and spectroscopic methods.     

Anomalous substituent effects in the bischler-napieralski reaction of 2-aryl aromatic formamides

Treatment of some 1-naphthylformamides (or formanilides) possessing a 2,4,5-trioxygenated phenyl substituent at the 2-position with POCl(3) caused an unprecedented carbon insertion reaction into a benzene ring, producing 7-5 ring (azaazulene) systems as valence isomers of isoquinoline skeletons. Precise examination of this abnormal Bischler-Napieralski reaction (BNR) using various substrates led to the following scope and limitations: (i) the 7-5 ring systems were constructed when either 2-alkoxy-4, 5-methylenedioxyphenyl- or 4,5-dialkoxy-2-hydroxyphenyl-substituted formamides were used as a starting substrate; (ii) in the former case the formyl carbon was inserted into the C(1)-C(6) bond of the 2-phenyl group, and normal isoquinoline cyclization competed with an abnormal carbon insertion reaction; (iii) the presence of a hydroxy group at the 2'-position as in the latter cases caused exclusive carbon insertion, in which alternative C(1)-C(2) insertion products were quantitatively formed; (iv) 3, 6-dimethoxy-2-hydroxyphenyl-substituted formanilide electronically equivalent to 4,5-dialkoxy-2-hydroxy derivatives produced an indole-pyrone as an abnormal BNR product. Theoretical approaches using the PM-3 method indicated that these abnormal BNRs could be triggered by ipso attack at the 1'-position yielding spiro intermediates. Ring cleavege of the six-membered ring in the spiro intermediates to a ketene function followed by recyclization was proposed for the 2'-hydroxy-directed abnormal BNRs leading to the C(1)-C(2) insertion product or the indole-pyrone derivative.     

Synthesis, structure, and catalytic properties of polymer-immobilized rhodium clusters

Immobilized Rh₆ clusters (cyclohexene hydrogenation catalysts) were prepared by the polymer-analogous transformations or copolymerization of cluster-containing monomers and characterized. Intermediates formed in the course of a catalytic reaction were studied using IR spectroscopy, XPS, and atomic force microscopy. It was found that the relative intensity of a low-energy line in the Rh3d _5/2 spectrum of the initial polymer-immobilized cluster in the XPS spectrum of Rh₆ increased in the course of hydrogenation. The catalytic activity of the immobilized complex changed symbatically with both the number of Rh atoms bound to the H(CO) group and the number of Rh atoms, the charge on which was greater than that in the parent cluster. Some experimental evidence was obtained in favor of the hypothesis of cluster fragmentation in the course of hydrogenation with the formation of highly active, most likely, nanosized particles, which are true catalysts, in low concentrations. The surface of macrocomplex particles after hydrogenation became more homogeneous and hydrophilic; this fact is also indicative of an increase in the concentration of polar functional groups in surface layers. This was likely due to Rh-Rh bond cleavage in the polymer-immobilized cluster.     

Synthesis of novel apio carbocyclic nucleoside analogues as selective a(3) adenosine receptor agonists

On the basis of the biological activity of neplanocin A and apio-dideoxyadenosine (apio-ddA), novel apio-neplanocin A analogues 5a-d, combining the properties of two nucleosides, were stereoselectively synthesized. The apio moiety of the target nucleosides 5a-d was stereoselectively introduced by treating lactol 10 with 37% formaldehyde in the presence of potassium carbonate. The carbasugar moiety of neplanocin A was successively built by exposing diene 12 on a Grubbs catalyst in methylene chloride. The final nucleosides 5a-d were synthesized from the condensation of the glycosyl donor 14 with nucleic bases under the standard Mitsunobu conditions. Similarly, apio-aristeromycin 6 and (N)-apio-methanocarbaadenosine 7 were derived from the common intermediate 13 using catalytic hydrogenation and Simmons-Smith cyclopropanation as key steps. All of the final nucleosides 5a-d, 6, and 7 did not show significant inhibitory activity against S-adenosylhomocysteine hydrolase (SAH) up to 100 muM, maybe due to the absence of the secondary hydroxyl group at the C3'-position, which should be oxidized by cofactor-bound NAD(+). However, apio-neplanocin A (5a) showed potent and highly selective binding affinity (K(i) = 628 +/- 69 nM) at the A(3) adenosine receptor without any binding affinity at the A(1) and A(2A) adenosine receptors. In conclusion, we have first developed novel carbocyclic nucleosides with unnatural apio-carbasugars using stereoselective hydroxymethylation and RCM reaction and also discovered a new template of human A(3) adenosine receptor agonist, which play a great role in developing new A(3) adenosine receptor agonist as well as in identifying the binding site of the receptor.     

Synthesis of 1-beta-D-(5-deoxy-5-iodoarabinofuranosyl)-2-nitroimidazole (beta-IAZA): a novel marker of tissue hypoxia

The present work describes the synthesis of the beta-isomer of 1-alpha-D-(5-deoxy-5-iodoarabinofuranosyl)-2-nitroimidazole (IAZA). Radioiodinated IAZA ((123)I-IAZA) has been extensively studied as a radiopharmaceutical for the diagnosis of regional and/or focal tissue hypoxia in a variety of clinical pathologies. The beta-anomer of IAZA, 1-beta-D-(5-deoxy-5-iodoarabinofuranosyl)-2-nitroimidazole (beta-IAZA, 1), was synthesized via an unconventional route starting from 1-beta-D-(ribofuranosyl)-2-nitroimidazole (AZR), with a change of configuration at the C-2'-position to afford 1-beta-D-(arabinofuranosyl)-2-nitroimidazole (beta-AZA, 7). Nucleophilic iodination of the 5'-O-toluenesulfonyl-2',3'-di-O-acetyl precursor of beta-AZA, 9, followed by deprotection, afforded 1 in satisfactory yield. beta-IAZA (1) was also synthesized from 7 using molecular iodine and triphenylphosphine.     

Enantioselective total syntheses of the Ipecacuanha alkaloid emetine, the Alangium alkaloid tubulosine and a novel benzoquinolizidine alkaloid by using a domino process

The first enantioselective syntheses of the Ipecacuanha alkaloid emetine (1) and the Alangium alkaloid tubulosine (2) is described employing a domino Knoevenagel/hetero-Diels-Alder reaction and an enantioselective catalytic transfer hydrogenation of imines as key steps. Thus, hydrogenation of the imine 15 with the catalyst (R,R)-16 gives the tetrahydroisoquinoline 14 with 95 % ee which was transformed into the aldehyde (1S)-7. The three-component domino reaction of (1S)-7 with 6 and 8 led to 19, which in a second domino process was treated with K(2)CO(3) in methanol followed by a hydrogenation to give the benzoquinolizidine 4 together with the diastereomers 22 and 23 in a overall yield of 66 %. Further transformation of 4 with the amines 3 and 5 yielded enantiopure emetine (1) and tubulosine (2), respectively. In addition, starting from 19 the novel benzoquinolizidine alkaloid 34 was synthesised; this compound resembles the vallesiachotamine alkaloid dihydroantirhin 31, which has not been isolated so far but probably must also exist in nature.     

The Synthesis of 12-Methyl-1, 2, 3, 4, 6, 7, 12, 12B-Octahydroindolo [2,3-A]Quinolizine (1), 1-Benzoyl-1, 2, 3, 4, 6, 7, 12, 12B-Octahydroindolo[2, 3-A]Quinolizine (2), and 1-Phenylcarbinol-1, 2, 3, 4, 6, 7, 12, 12B-Octahydroindolo[2, 3-A]Quinolizine (3)

12-Methyl-l, 2, 3, 4, 6, 7, 12, 12b-octahydroindolo[2, 3-a]quinolizine (1) is synthesized through a new route developed in our laboratory. The most important step in this synthesis is the condensation of I-methyltryptophyl bromide (4) with 2-piperidone (5) to give N -(2-(1-methylidol)-3-ylethyl)-2-piperidone (6) in good yield (70%). The synthesis of 1-benzoyl-1, 2, 3, 4, 6, 7, 12, 12b-octahydroindolo(2, 3-a]quinolizine (2) and 1-phenylcarbinol-1, 2, 3, 4, 6, 7, 12, 12b-octahydroindolo[2, 3-a]quinolizine (3) follow the method developed by Wenkert. But the yield of tetrahydropyridine 9 from partial hydrogenation of pyridinum bromide 8 with 10% palladium-charcoal is 84% which is much higher than the best yield (40%) in the literature, since the phenyl group contribute additional stability.     

Synthesis, Crystal Structure, Physical Properties, and Application of a Series of Functional Dibenzo[d,f][1,3]dioxepine Derivatives

The twisted aromatics, functional dibenzo[d,f][1,3]dioxepine derivatives were synthesized in high yields from reactions of 5,5＇-dibromo-2,2＇-biphenol with corresponding ketal or ketone compounds under acid catalysis. The structures of these compounds were characterized by ^1H NMR, elemental analysis, UV-Vis absorption spectrum and X-ray diffraction analysis. The conformation of O--C--O bridged biphenyl derivatives with varied substitute groups on 6,6＇-position was studied by X-ray crystallography and force-field simulation. The result of calculations by UNIVERSAL 1.02 force field in Cerius2 package（4.6） indicates that dibenzo[d,f][1,3]dioxepine derivatives show twisted conformations and the twisted angle between the phenyl rings is about 40°, which is accordant with the result from crystal structure determination, though the obtained angles in the crystal of dibenzo[d,f][1,3]dioxepine derivatives with the varied substitute groups on 6,6＇-position are shown to be slightly shifted to 40° owing to intermolecular interactions in crystal stacking. DSC studies exhibit that the substitute groups on 6,6＇-position can induce a large variation of endothermic peaks ranging from 80 to 135 ℃. The conjugated polymers based on dibenzo[d,f][1,3]dioxepine derivatives, which have ultraviolet emitting with a quantum efficiency of 10%, were obtained by Yamamoto coupling.     

Bildung von 2-(1-Methyl-1, 4, 5, 6-tetrahydropyridyl-3)-2-oxazolin-4-on aus 1-Methyl-1, 4, 5, 6-tetrahydronicotinsäureamid und Bromessigsäureäthylester und seine Überführung in O-(1-Methylnipecotinoyl)glykolsäureamid via das dazu tautomere Cyclol

The main product of the reaction between 1-methyl-1, 4, 5, 6-tetrahydronicotin-amide and ethyl bromoacetate is shown to be the 2-(1-methyl-1, 4, 5, 6-tetrahydropyridyl-3)-2-oxazoline-4-one which on partial hydrogenation followed by reaction with alkali affords O-(1-methylnipecotinoyl)glycolic amide, presumably via the tautomeric cyclol.     

Catalytic mechanism of cytochrome P450 for 5'-hydroxylation of nicotine: fundamental reaction pathways and stereoselectivity

A series of computational methods were used to study how cytochrome P450 2A6 (CYP2A6) interacts with (S)-(-)-nicotine, demonstrating that the dominant molecular species of (S)-(-)-nicotine in CYP2A6 active site exists in the free base state (with two conformations, SR(t) and SR(c)), despite the fact that the protonated state is dominant for the free ligand in solution. The computational results reveal that the dominant pathway of nicotine metabolism in CYP2A6 is through nicotine free base oxidation. Further, first-principles quantum mechanical/molecular mechanical free energy (QM/MM-FE) calculations were carried out to uncover the detailed reaction pathways for the CYP2A6-catalyzed nicotine 5'-hydroxylation reaction. In the determined CYP2A6-(S)-(-)-nicotine binding structures, the oxygen of Compound I (Cpd I) can abstract a hydrogen from either the trans-5'- or the cis-5'-position of (S)-(-)-nicotine. CYP2A6-catalyzed (S)-(-)-nicotine 5'-hydroxylation consists of two reaction steps, that is, the hydrogen transfer from the 5'-position of (S)-(-)-nicotine to the oxygen of Cpd I (the H-transfer step), followed by the recombination of the (S)-(-)-nicotine moiety with the iron-bound hydroxyl group to generate the 5'-hydroxynicotine product (the O-rebound step). The H-transfer step is rate-determining. The 5'-hydroxylation proceeds mainly with the stereoselective loss of the trans-5'-hydrogen, that is, the 5'-hydrogen trans to the pyridine ring. The calculated overall stereoselectivity of ～97% favoring the trans-5'-hydroxylation is close to the observed stereoselectivity of 89-94%. This is the first time it has been demonstrated that a CYP substrate exists dominantly in one protonation state (cationic species) in solution, but uses its less-favorable protonation state (neutral free base) to perform the enzymatic reaction.     

Independent generation and study of 5,6-Dihydro-2'-deoxyuridin-6-yl,a member of the major family of reactive intermediates formed in DNA from the effects of gamma-radiolysis

Nucleobase radicals are the major family of reactive intermediates formed when nucleic acids are exposed to gamma-radiolysis. Elucidation of their reactivity is complicated by the formation of multiple species randomly throughout the biopolymers. 5,6-Dihydro-2'-deoxyuridin-6-yl (1) was generated upon photolysis (350 nm) of the respective tert-butyl ketone (2). The radical abstracts hydrogen atoms from beta-mercaptoethanol (k = 8.8 +/- 0.5 x 10(6) M(-)(1) s(-)(1)) and 2,5-dimethyltetrahydrofuran (k = 31 +/- 2.5 M(-)(1) s(-)(1)). The latter was used as a model for the 2-deoxyribose component of DNA. The major product formed in the presence of O(2) was 6-hydroxy-5,6-dihydro-2'-deoxyuridine (11), which is believed to be formed directly from the peroxy precursor and not via elimination of superoxide. Small amounts of 2-deoxyribonolactone (13) were also formed under aerobic conditions. This product is believed to result from intramolecular hydrogen atom abstraction by the C6-peroxyl radical (14) and suggests that gamma-radiolysis may indirectly result in oxidation of the C1'-position of nucleotides, despite the inaccessibility of this hydrogen in duplex DNA.     

The synthesis of double-headed nucleosides by the CuAAC reaction and their effect in secondary nucleic acid structures

Four double-headed nucleosides were prepared by the CuAAC reaction. Hereby, a triazole-containing linker connects an additional thymine or adenine to the 2'-position of 2'-deoxyuridine, a thymine to the 5'-position of thymidine and a thymine to the 6'-position of an LNA-thymidine monomer. Whereas no conclusive recognition effects of the additional thymines were found when introduced in LNA or at the 5'-position, both thymine and adenine in the 2'-position were found to stabilise three-way junctions in both dsDNA and DNA?:?RNA contexts and to give cross-strand interactions in a DNA-duplex, when specifically introduced in a so-called (+1)-zipper motif.     

Synthesis of 2-(N-Acetylamino)-2-deoxy-C-glucopyranosyl nucleosides as potential inhibitors of chitin synthases

The C-glucopyranosyl nucleosides (1-4) containing the N-acetyl glucosaminyl and uridine units have been synthesized as nonhydrolyzable substrate analogues of UDP-GlcNAc aimed to inhibit the chitin synthases. The key intermediate, 4-(2'-(N-acetylamino)-3', 4',6'-tri-O-benzyl-2'-deoxy-alpha-D-glucopyranosyl)but-2-enoic acid (5), was prepared from the perbenzylated (N-acetylamino)-alpha-C-allylglucoside (7), by successive oxidative cleavage, Wittig olefination, and ester deprotection. The coupling of the acid 5 with the hydroxyl or amine function of the uridine derivatives (6a or 6b) afforded, respectively, the ester 12 and amide 14. The dihydroxylation of the conjugated double bond in ester 12 or amide 14 was better achieved with osmium tetraoxide/barium chlorate, leading to the expected diols 13 and 15 as a mixture of two diastereoisomers. The desired compounds 1-4 were obtained after catalytic hydrogenation of compounds 12-15.     

Abbau von Palustrin zu (−)-Dihydropalustraminsäure ((2R, 6S, 1′S)-[6-(1′-Hydroxypropyl)-2-piperidyl]essigsäure) und Struktur von Palustrin und Palustridin. Mitteilung über Schachtelhalmalkaloide

Degradation of palustrin to (?)-dihydropalustramic acid ((2R,6S,1′S)-[6-(1′-hydroxypropyl)-2-piperidyl]acetic acid), and the structure of palustrin and palustridin The structure of the macrocyclic alkaloid palustrin is shown to be 1a . Its piperidine unit can be obtained as (?)-dihydropalustramic acid ( 6a ) by the following sequence of degradation reactions (Scheme 1): catalytic hydrogenation of 1a followed by methylation and Hofmann degradation provides the allyl base 4 . the regioselectivity of the Hofmann elimination is explained by intramolecular proton abstraction at C(3) by C(18)-O^?. Catalytic reduction of 4 and subsequent acidic hydrolysis yielded 6a and N, N-dimethylputrescine (?N,N-dimethyl-1,4-butanediamine; 7 ). Loss of the N-alkyl group in the formation of 6a occurs during the catalytic hydrogenation step. This interpretation is supported by the results of model experiments. The position of the double bond in 1a is deduced from the IR. spectrum of the bromo-δ-lactone 19 prepared by treatment of 1a with N-bromosuccinimide at pH 4 (Scheme 3). Some of our previously published results on the degradation of dihydropalustrin ( 2a ) are obviously at variance with the newly proposed structure for palustrin ( 1a ). They can easily be explained by assuming a partial hydrogenolysis of the C(17)-N(1) bond during the preparation of dihydropalustrin from palustrin. Periodate cleavage of dihydropalustramic acid methyl ester ( 6b ) liberates propionaldehyde, which can be trapped by working at pH 7.5 (Scheme 2); at lower pH values it condenses rapidly with the simultaneously generated 3,4,5,6-tetrahydropyridine derivative 15 . The structure of the condensation product is proposed to be 16 on the basis of the isolation of its hydrogenation product, an isomeric dihydropalustramic acid ( 17 ).     

Bluish-Green BMes(2) -Functionalized Pt(II) Complexes for High Efficiency PhOLEDs: Impact of the BMes(2) Location on Emission Color

New phosphorescent Pt(II) compounds based on dimesitylboron (BMes(2) )-functionalized 2-phenylpyridyl (ppy) N,C-chelate ligands and an acetylacetonato ancillary ligand have been achieved. We have found that BMes(2) substitution at the 4'-position of the phenyl ring can blue-shift the phosphorescent emission energy of the Pt(II) compound by approximately 50?nm, compared to the 5'-BMes(2) substituted analogue, without substantial loss of luminescent quantum efficiencies. The emission color of the 4'-BMes(2) substituted Pt(II) compound, Pt(Bppy)(acac) (1) can be further tuned by the introduction of a substituent group at the 3'-position of the phenyl ring. A methyl substituent red-shifts the emission energy of 1 by approximately 10?nm whereas a fluoro substituent blue-shifts the emission energy by about 6?nm. Using this strategy, three bright blue-green phosphorescent Pt(II) compounds 1, 2 and 3 with emission energy at 481, 492, and 475?nm and Φ(PL) =0.43, 0.26 and 0.25, respectively, have been achieved. In addition, we have examined the impact of BMes(2) substitution on 3,5-dipyridylbenzene (dpb) N,C,N-chelate Pt(II) compounds by synthesizing compound 4, Pt(Bdpb)Cl, which has a BMes(2) group at the 4'-position of the benzene ring. Compound 4 has a phosphorescent emission band at 485?nm and Φ(PL) =0.70. Highly efficient blue-green electroluminescent (EL) devices with a double-layer structure and compounds 1, 3 or 4 as the phosphorescent dopant have been fabricated. At 100?cd?m(-2) luminance, EL devices based on 1, 3 and 4 with an external quantum efficiency of 4.7, 6.5 and 13.4?%, respectively, have been achieved.     

Synthesis of new 3'-, 5-, and N(4)-modified 2'-O-methylcytidine libraries on solid support

A versatile solid phase combinatorial approach was developed and utilized for the rapid synthesis of new 2'-O-methylcytidine nucleoside libraries 1-7 containing 672 compounds with 3'-deoxy-3'-C-methyl, 3'-deoxy-3'-C-hydroxymethyl, and 5-alkyl/alkynyl modifications. The modified uridine scaffolds 8-10, 23-25, and 31 were loaded onto the 4-methoxytrityl chloride (MMT-Cl) polystyrene resin through the hydroxyl groups at the 5'-position as well as on the substituents at the 3'- and 5-positions. The scaffolds loaded on the resin were orthogonally protected by MMT group on the resin itself and TBDMS or acetyl protecting groups. The 4-position of the uridine derivatives was activated by 2,4,6-triisopropyl benzene sulfonyl chloride for further derivatization. The resins 14-16, 28-30, and 32 loaded with the corresponding activated scaffolds were reacted with the selected and validated amino building blocks in the 96 well format on the semiautomated synthesizer. The high-quality 2'-O-methylcytidine libraries 1-7 were thus generated and characterized by liquid chromatography-mass spectrometry (LC-MS) analysis with 63-99% successful rates.     

Simple Stereocontrolled Synthesis of Methyl 2-Deoxy-d-erythro-hexopyranosid-4-uloses,Thromboxane B2 (TXB2) Precursors,from d-Galactose

Abstract

The stereospecific synthesis of methyl 3-O-benzoyl-6-O-(tert-butyldiphenylsilyl)-2-deoxy-α-d-erythro-hexopyranosid-4-ulose (5) - a Thromboxane B₂ (TXB₂) precursor -starting from D-galactose is described. Facile and established methods including selective benzoylation, oxidation-elimination and a stereocontrolled hydrogenation (Pd/charcoal) were employed effectively.