Laser-induced silver nanocrystal formation in polyvinylpyrrolidone solutions

We report unusual laser-induced shape conversions of silver nanoparticles dispersed in polyvinylpyrrolidone (PVP) aqueous solutions. Silver nanocrystals such as nanoplates and nanorods were formed using laser irradiation for colloidal silver nanoparticles prepared using laser ablation in aqueous solutions of PVP. Differing from the nanocrystal formation observed in neat water and halide solutions, which were induced by weak laser or fluorescent-light irradiation, the nanocrystal formation in PVP solutions was induced by strong laser irradiation. On the other hand, nanocrystal formation was not observed in polyvinylalcohol (PVA) solutions, in which fusion of nanoparticles were prominent. It is proposed that the nanocrystals were formed from fragmented nanoparticles protected by PVP via a ripening process.     

Fluorescent nanoparticles assembled from a poly(ionic liquid) for selective sensing of copper ions

Fluorescent nanoparticles were formed from a poly(ionic liquid) through ion interactions. The fluorescent nanoparticles show highly fluorescent intensity and stability to UV light irradiation and were utilized for highly sensitive and selectivity fluorescent sensor of copper ion.     

Morphological change of gold-dendrimer nanocomposites by laser irradiation

Gold-dendrimer nanocomposites are prepared in aqueous solutions in the presence of poly(amidoamine)dendrimers (PAMAM) (generation 3 and 5) or poly(propyleneimine)dendrimers (PPI) (generation 3 and 4) by wet chemical NaBH(4) method. Thus prepared gold-dendrimer nanocomposites are irradiated by laser at 532 nm. UV-vis absorption spectroscopy and transmission electron microscopy reveal that the gold nanoparticles grow with the laser irradiation time as well as the fluence of the laser; in particular, the gold nanoparticles prepared at lower concentrations of PAMAM dendrimer as well as lower generations of PAMAM grow significantly. On the other hand, in the case of PPI dendrimers, the gold nanoparticles hardly grow by irradiation. In addition, dynamic light-scattering measurements show that the laser irradiation markedly promotes the association of the gold-PAMAM G3 dendrimer nanocomposites compared to that of the gold-PAMAM G5 dendrimer nanocomposites, while the sizes of association for the gold-PPI G3, G4 dendrimer nanocomposites hardly change by laser irradiation.     

Immobilized ionic liquid on superparamagnetic nanoparticles as an effective catalyst for the synthesis of tetrasubstituted imidazoles under solvent-free conditions and microwave irradiation

The ionic liquid 1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was immobilized on superparamagnetic Fe₃O₄ nanoparticles (IL-MNPs) and used as an efficient heterogeneous catalyst for the one-pot synthesis of 1,2,4,5-tetrasubstituted imidazoles under solvent-free conditions using microwave irradiation. The reactions in conventional heating conditions were compared with the microwave-assisted reactions. The combined merits of microwave irradiation and immobilized ionic liquid on superparamagnetic nanoparticles make the four-component condensation with safe operation, low pollution, and rapid access to products and simple work-up.     

聚多巴胺-阿霉素纳米颗粒对癌细胞的化疗-光热治疗协同作用

通过在水相中加入乙醇和氨水, 将单分子多巴胺聚合成具有良好光热转换能力的聚多巴胺纳米颗粒(PDA), 并利用π-π作用与共价键作用, 将抗癌药物阿霉素(Dox)负载到聚多巴胺纳米颗粒的表面, 制备了聚多巴胺纳米颗粒负载阿霉素(PDA-Dox), 研究了PDA-Dox的药物缓释性能. 结果发现, PDA-Dox能够在酸性环境下增加药物释放. 细胞实验显示, PDA-Dox配合激光照射, 能够通过化疗和光热治疗高效地杀死癌细胞.     

Copper- and ligand-free Sonogashira reaction catalyzed by Pd(0) nanoparticles at ambient conditions under ultrasound irradiation

The Sonogashira reaction proceeds at ambient temperature (30 degrees C) in acetone or room-temperature ionic liquid, 1,3-di-n-butylimidazolium tetrafluoroborate ([bbim]BF4), as solvent under ultrasound irradiation to give enhanced reaction rates, excellent chemoselectivity, and high yields in the absence of a copper cocatalyst and a phosphine ligand. TEM analysis showed the formation of stable, crystalline, and polydispersed Pd(0) nanoparticles as catalyst for the reaction.     

离子液体[Bmim][BF_4]中卟啉的三线态动力学

室温离子液体由于其几乎不挥发、稳定性突出、良好的电化学性能以及结构与性能的可设计性等优点,在诸多领域得到了深入的研究和广泛的应用。与传统的普通溶剂不同,离子液体的本质特点之一是其内部的微观结构具有微不均匀性。本文通过对四苯基卟啉(TPP)分子在离子液体[Bmim][BF_4]中的三线态动力学研究,发现在激光作用下,TPP的三线态寿命由2.95μs显著增加到184μs。进一步分析表明,这一现象很可能是由于离子液体的微结构在激光诱导下发生变化,被激光场或者离子诱导极化的氧气分子在离子液体微不均匀性环境中发生重新分布而引起的。     

Nanoscale Pt(0) particles prepared in imidazolium room temperature ionic liquids: synthesis from an organometallic precursor,characterization, and catalytic properties in hydrogenation reactions

The reaction of Pt(2)(dba)(3) (dba = bis-dibenzylidene acetone) dispersed in room temperature 1-n-butyl-3-methylimidazolium (BMI) hexafluorophosphate ionic liquid with molecular hydrogen (4 atm) at 75 degrees C leads to stable and isolable nanometric Pt(0) particles. The X-ray diffraction analysis (XRD) of the material indicated that it is constituted of Pt(0). Transmission electron microscopy (TEM) analysis of the particles dispersed in the ionic liquid shows the formation of [Pt(0)](n) nanoparticles of 2.0-2.5 nm in diameter. A detailed examination of the nanoparticles imbibed in the ionic liquid and their environment shows an interaction of the BMI.PF(6) ionic liquid with the Pt(0) nanoparticles. The isolated [Pt(0)](n) nanoparticles can be redispersed in the ionic liquid or in acetone or used in solventless conditions for liquid-liquid biphasic, homogeneous, or heterogeneous hydrogenation of alkenes and arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered platinum nanoparticles can be reused as a solid or redispersed in the ionic liquid several times without any significant loss in catalytic activity.     

光诱导富精氨酸多肽修饰的Fe2O3@Au纳米粒子的细胞毒性

以人宫颈癌细胞(HeLa细胞)为对象考察了富精氨酸多肽RRRRRRRR(R8)修饰的金-三氧化二铁壳核纳米粒子(R8-Fe2O3@Au NPs)对活细胞的光毒性. 研究结果表明, 内化后的R8-Fe2O3@Au NPs对活HeLa细胞无显著的细胞毒性, 但在激光照射下则可导致HeLa细胞的凋亡, 表现出很强的细胞光毒性. R8-Fe2O3@Au NPs的细胞光毒性与照射激光波长有关, 并随细胞吞噬的R8-Fe2O3@Au NPs的量、 光照强度和时间的增加而增强.     

The use of imidazolium ionic liquids for the formation and stabilization of ir0 and rh0 nanoparticles: efficient catalysts for the hydrogenation of arenes

Stable transition-metal nanoparticles of the type [M(0)](n) are easily accessible through the reduction of Ir(I) or Rh(III) compounds dissolved in "dry" 1-n-butyl-3-methylimidazolium hexafluorophosphate ionic liquid by molecular hydrogen. The formation of these [M(0)](n) nanoparticles is straightforward; they are prepared in dry ionic liquid whereas the presence of the water causes the partial decomposition of ionic liquid with the formation of phosphates, HF and transition-metal fluorides. Transmission electron microscopy (TEM) observations and X-ray diffraction analysis (XRD) show the formation of [Ir(0)](n) and [Rh(0)](n) nanoparticles with 2.0-2.5 nm in diameter. The isolated [M(0)](n) nanoparticles can be redispersed in the ionic liquid, in acetone or used in solventless conditions for the liquid-liquid biphasic, homogeneous or heterogeneous hydrogenation of arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered iridium nanoparticles can be reused several times without any significant loss in catalytic activity. Unprecedented total turnover numbers (TTO) of 3509 in 32 h, for arene hydrogenation by nanoparticles catalysts, have been achieved in the reduction of benzene by the [Ir(0)](n) in solventless conditions. Contrarily, the recovered Rh(0) nanoparticles show significant agglomeration into large particles with a loss of catalytic activity. The hydrogenation of arenes containing functional groups, such as anisole, by the [Ir(0)](n) nanoparticles occurs with concomitant hydrogenolysis of the C-O bond, suggesting that these nanoparticles behave as "heterogeneous catalysts" rather than "homogeneous catalysts".     

Controlled release of α-amylase from microchamber arrays containing carbon nanoparticle aggregates

Microchamber arrays have been prepared from a composite of polylactic acid and carbon nanoparticles. Due to the presence of the nanoparticles, the microchambers are sensitive to infrared laser irradiation. α-Amylase has been encapsulated in the microchambers and released under controlled laser irradiation at 1064 nm with retention of the enzyme activity.     

Strong thermal optical nonlinearity caused by CdSe nanoparticles synthesised in smectic ionic liquid crystal

Spectral and nonlinear optical properties of cadmium octanoate composites containing CdSe nanoparticles (NPs) have been studied by using optical absorption spectroscopy and laser scanning technique (Z-scan). CdSe NPs are chemically synthesised in thermotropic ionic liquid crystal (ILC) phase of cadmium octanoate which is used as nanoreactor. Anisotropic glassy nanocomposites are obtained by the rapid cooling of the ILC phase of nanocomposites to room temperature. The sizes of the CdSe NPs are determined from the absorption spectra. The thermo-optical nonlinearity of the new nanocomposites is characterised by extremely large value of the nonlinear refractive index, n₂, under relatively low-powered CW laser irradiation. This nonlinearity is caused by (1) the efficient light-induced heating due to the CdSe NPs strong exciton absorption, and (2) consequent thermal dissipation, which in turn, produces the photoelastic tensions in the glassy smectic matrix.     

Synthesis and characterization of catalytic iridium nanoparticles in imidazolium ionic liquids

The reduction of [Ir(cod)Cl](2) (cod=1,5-cyclooctadiene) dissolved in 1-n-butyl-3-methyl tetrafluoroborate, hexafluorophosphate and trifluoromethane sulphonate ionic liquids in the presence of 1-decene by molecular hydrogen produces Ir(0) nanoparticles. The formation of these nanoparticles follows the two-step [A-->B, A+B-->2B (k(1),k(2))] autocatalytic mechanism. The same mean diameter values of around 2-3 nm were estimated from in situ TEM and SAXS analyses of the Ir(0) nanoparticles dispersed in the ionic liquids and by XRD of the isolated material. XPS and EXAFS analyses clearly show the interactions of the ionic liquid with the metal surface demonstrating the formation of an ionic liquid protective layer surrounding the iridium nanoparticles. SAXS analysis indicated the formation of an ionic liquid layer surrounding the metal particles with an extended molecular length of around 2.8-4.0 nm depending on the type of the anion.     

Influence of laser irradiation on the optical properties of nano-sized powder of metal oxide

ZnO Nano powders were prepared by co-precipitation method which includes post-oxidation and annealing in air. Influence of laser irradiation was carried out using 355 nm laser on the physical properties of ZnO nanoparticles. SEM studies reveal agglomeration of grains resulting into enlargement and deformation of the nanoparticles. XRD pattern exhibited decrease in FWHM which is a clear evidence of the increase in crystallite size due to laser irradiation. Optical properties showed decrease in the band gap of the laser irradiated Nano powders. The observed results indicated the UV laser irradiation increases the ZnO nanoparticles crystallinity that affects the optical properties of the ZnO.     

Fabrication of a covalently attached self-assembly multilayer film based on CdTe nanoparticles

A precursor film has been fabricated from TGA (thiolglycolic acid)-stabilized CdTe nanoparticles and NDR (nitro-containing diazoresin) using electrostatic interactions and the standard layer-by-layer assembly method; covalent bonds are formed under ultraviolet irradiation. XPS provided evidence for the presence of CdTe nanoparticles within the polymer ultrathin films. UV-visible spectroscopy and FTIR spectroscopy provide evidence for the formation of a covalent linkage. Moreover, the UV-visible spectroscopy and AFM measurement support the improvement of the stability of the hybrid organic/inorganic film toward polar solvents when the linkages between the nanoparticles and polymer changed from ionic bonds to covalent bonds.     

Laser-assisted synthesis of Au-Ag alloy nanoparticles in solution

By using laser-induced heating, we prepared Au-Ag nanoalloys via three different procedures: (i) mixture of Au nanoparticles and Ag(+) ions irradiated by a 532 nm laser, (ii) mixture of Au and Ag nanoparticles irradiated by a 532 nm laser, and (iii) mixture of Au and Ag nanoparticles irradiated by a 355 nm laser. Procedure i is advantageous for the production of spherical alloy nanoparticles; in procedures ii and iii, nanoalloys with a sintered structure have been obtained. The morphology of the obtained nanoalloys depends not only on the laser wavelength but also on the concentration of nanoparticles in the initial mixture. When the total concentration of Ag and Au nanoparticles in the mixture is increased, large-scale interlinked networks have been observed upon laser irradiation. It is expected that this selective heating strategy can be extended to prepare other bi- or multi-metallic nanoalloys.     

Gold nanoparticles prepared by glycinate ionic liquid assisted multi-photon photoreduction

We have successfully prepared gold nanoparticles (AuNPs) with flower-like and spherical morphology through multi-photon photoreduction (MPR) of an aqueous solution of HAuCl(4) and (2-hydroxyethyl) trimethylammonium glycinate ([HETMA][Gly]) ionic liquid (IL) through the use of a femtosecond laser. The results of (1)H NMR and UV-Vis absorption indicated that AuNPs were produced from the photoreduction of the [Gly]-Au(iii) complex. Spherical AuNPs of about 2.5 nm were obtained on the solution when irradiated for 2 h, then aggregated into flower-like AuNPs of several tens of nanometers assisted by the IL with an increase in the irradiation time. Furthermore, precipitates of spherical AuNPs with the size of around 15 nm were formed after being irradiated for 6 h. The mechanisms of the MPR reaction and controlled growth of AuNPs have also been discussed.     

The role of Pd nanoparticles in ionic liquid in the Heck reaction

Pd(0) nanoparticles with approximately 2 nm diameter, immobilized in 1-n-butyl-3-methylimidazolium hexafluorophosphate ionic liquid, are efficient catalyst precursors for coupling of aryl halides with n-butylacrylate. In situ TEM analysis of the ionic liquid catalytic solution after the catalytic reaction shows the formation of larger nanoparticles ( approximately 6 nm). The palladium content in the organic phase during the arylation reaction was checked by ICP-AS and shows significant metal leaching (up 34%) from the ionic phase to the organic phase at low substrate conversions and drops to 5-8% leaching at higher conversions. These results strongly suggest that the Pd(0) nanoparticles serve as a reservoir of "homogeneous" catalytic active species.     

In situ formation and size control of gold nanoparticles into chitosan for nanocomposite surfaces with tailored wettability

The in situ formation of gold nanoparticles into the natural polymer chitosan is described upon pulsed laser irradiation. In particular, hydrogel-type films of chitosan get loaded with the gold precursor, chloroauric acid salt (HAuCl(4)), by immersion in its aqueous solution. After the irradiation of this system with increasing number of ultraviolet laser pulses, we observe the formation of gold nanoparticles with increasing density and decreasing size. Analytical studies using absorption measurements, atomic force microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy of the nanocomposite samples throughout the irradiation procedure reveal that under the specific irradiation conditions there are two competing mechanisms responsible for the nanoparticles production: the photoreduction of the precursor responsible for the rising growth of gold particles with increasing size and the subsequent photofragmentation of these particles into smaller ones. The described method allows the localized formation of gold nanoparticles into specific areas of the polymeric films, expanding its potential applications due to its patterning capability. The size and density control of the gold nanoparticles, obtained by the accurate increase of the laser irradiation time, is accompanied by the simultaneously controlled increase of the wettability of the obtained gold nanocomposite surfaces. The capability of tailoring the hydrophilicity of nanocomposite materials based on natural polymer and biocompatible gold nanoparticles provides new potentialities in microfluidics or lab on chip devices for blood analysis or drugs transport, as well as in scaffold development for preferential cells growth.     

Bimodal Size Distribution of Gold Nanoparticles under Picosecond Laser Pulses

The evolution of size distributions of gold nanoparticles under pulsed laser irradiation (Nd:YAG, lambda = 355 nm, pulse width 30 ps) was carefully observed by transmission electron microscopy. Interestingly, the initial monomodal size distribution of gold nanoparticles turned into a bimodal one, with two peaks in the number of particles, one at 6 nm and the other at 16-24 nm. The sizes for small particles depended very little on the irradiated laser energy. This change is attributed to laser-induced size reduction of the initial gold nanoparticles followed by the formation of small particles. In our analysis, we extracted a characteristic value for the size-reduction rate per one pulse and revealed that laser-induced size reduction of gold nanoparticles occurred even below the boiling point. When laser energy is insufficient for the boiling of particles, formation of gold vapor around liquid gold drops is thought to cause the phenomenon. With enough laser energy for the boiling, the formation of gold vapor around and inside liquid gold drops is responsible for the phenomenon. We also observed particles with gold strings after one pulse irradiation with a laser energy of 43 mJ cm(-2) pulse(-1), which is sufficient energy for the boiling. It is considered that such particles with gold strings are formed by the projection of gaseous gold from liquid gold drops with some volume of liquid gold around the bubble. On the basis of comparison with previous work, picosecond laser pulses are thought to be the most efficient way to cause laser-induced size reduction of gold nanoparticles.