Photoinduced processes in thin films of MoO<Subscript>3</Subscript> and mixed V<Subscript>2</Subscript>O<Subscript>5</Subscript>: MoO<Subscript>3</Subscript> oxides

Photoinduced processes in thin films of MoO₃ and mixed V₂O₅: MoO₃ oxides prepared by polycondensation of the respective oxoacids under solvothermal conditions are studied using Raman spectroscopy, ESR, and AFM. It is shown that, under UV irradiation, the photoinduced polycondensation occurs in the oxide films, leading to the formation of the oxygen bridges, an effect that opens up the possibility of developing a new photolithographic process.     

Gas sensor based on nanosize In<Subscript>2</Subscript>O<Subscript>3</Subscript>:Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> film

Nanosize films of In₂O₃:Ga₂O₃ (96:4 weight %) have been deposited on a glassceramic substrate by the method of rf magnetron sputtering. The surfaces of fabricated films were studied with use of a scanning electron microscope; sizes of grains were determined and the thicknesses of films were measured. In order to prepare a gas-sensitive structure, a thin catalytic palladium layer and ohmic comb contacts were deposited on the In₂O₃:Ga₂O₃ film surface by the method of ion-plasma sputtering. The sensitivity of sensors based on the glassceramic/In₂O₃:Ga₂O₃ (96:4 weight %)/Pd structure to different concentrations of propane and butane gas mixture, as well as to methane was investigated at temperatures of working substance from 250 to 300°C.     

Surface modification of polycrystalline oxides (V<Subscript>2</Subscript>O<Subscript>5</Subscript>, MoO<Subscript>3</Subscript>, and WO<Subscript>3</Subscript>) irradiated with high-power ion beams

The influence of a high-power ion beam on polycrystalline oxides (V₂O₅, MoO₃, and WO₃) is investigated. Oxide irradiation with ion beams with current densities of greater than ～30 A/cm² is established to initiate changes in the color of irradiated layers and lead to surface-layer particle melting. It is demonstrated that a distinctive feature of the interaction between a high-power ion beam and V₂O₅ is the formation of surface nanosheets and nanowires whose characteristic cross-sectional size and thickness are ～1 μm and up to ～40 nm, respectively. The nanosheets are generated near emerging surface cracks if the beam current density is ～100 A/cm². Possible mechanisms of surface nanostructures formation under the action of pulsed ion beams are discussed.     

Methane sensor based on SnO<Subscript>2</Subscript>/In<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> nanostructure

Two sets of samples of SnO₂/In₂O₃/TiO₂ system have been fabricated with different concentrations of component materials. In the first set TiO₂ with rutile structure was used, while in the second set it has the structure of anatase. Thin films (up to 50 nm) of obtained mixtures were deposited. Their sensitivity and selectivity with respect to methane (CH4) were studied. Nanostructure on the basis of 70%SnO₂ — 10%In₂O₃ — 20%TiO₂(anatase) exhibits sufficient sensitivity to methane.     

Modeling oxygen Ion transport of molten oxide membranes based on V<Subscript>2</Subscript>O<Subscript>5</Subscript>

A polymer model for oxygen ion transport in molten oxide membranes (MOM) based on V₂O₅ was developed. The model adapts Wagner’s theory for molten oxides and provides an interpretation of oxygen mobility in the oxide melts. Within the framework of this model, the values of oxygen permeation fluxes through the MOM were calculated and compared with experimental data. The calculated and experimental values are of the same order of magnitude which shows an adequacy of the model. A dynamic polymer chain concept is proposed. It is shown that the transference of oxygen ions in the oxide melts may occur by a mechanism of “connection–disconnection” of the polymer chains.     

Cells studies on PEO/PEG/NaClO<Subscript>3</Subscript> thin-film electrolyte system based on composite V<Subscript>2</Subscript>O<Subscript>5</Subscript> electrode

The thin-film solid polymer electrolyte based on polyethylene oxide (PEO) with sodium chlorite (NaClO₃) has been prepared by a solution-cast technique. The electrolyte was characterized by X-ray diffraction (XRD), infrared (IR), cyclic voltammetry, alternating current conductivity, and Wagner’s polarization studies. The complexation of NaClO₃ with PEO was confirmed through the XRD and IR studies. The transference number measurement has shown that the ion transport is predominant over electrons in the polymer electrolytes (t _ions ≈ 0.94). The conductivity enhancement was observed in the case of the PEO/NaClO₃ system with the addition of plasticizers (low-molecular-weight polyethylene glycol, organic solvents propylene carbonate and dimethyl formamide. Cyclic voltammetry analysis showed the stability and redox character of the electrolyte and electrode. Finally, polymer electrolyte systems were examined by electrochemical cell studies using V₂O₅ and composite V₂O₅ cathode at temperature of 35 °C. Overall, the plasticized electrolyte shows a better electrochemical performance, and a higher discharge capacity was observed in composite V₂O₅-based cells over V₂O₅-based cells.     

Anisotropy of the Complex Permittivity of the Kagome-Staircase Compounds Co<Subscript>3</Subscript>V<Subscript>2</Subscript>O<Subscript>8</Subscript> and Ni<Subscript>3</Subscript>V<Subscript>2</Subscript>O<Subscript>8</Subscript>: Experiment and Ab Initio Calculations

The anisotropy of the components of the complex permittivity of vanadate Co₃V₂O₈ and Co₃V₂O₈ single crystals in the paramagnetic phase are studied by optical ellipsometry in the spectral region 0.5–5.0 eV. Our experimental results support the weak anisotropy of the optical response detected earlier for axes a and c. The optical properties are also investigated along axis b. The properties of both compounds are compared. The optical spectra of both compounds along axis b are shifted toward low energies as compared to axes a and c. The maximum of the main interband absorption band of Co₃V₂O₈ is shifted toward low energies by 0.25–0.3 eV as compared to Co₃V₂O₈. The electronic structure parameters of both compounds are determined. Optical function spectra are analyzed using the results of ab initio band calculations.     

Specific features of electrical conductivity of V<Subscript>3</Subscript>O<Subscript>5</Subscript> single crystals

The electrical conductivity of V₃O₅ single crystals has been investigated over a wide temperature range, including the region of existence of the metallic phase and the region of the transition from the metallic phase to the insulating phase. It has been shown that the low electrical conductivity of metallic V₃O₅ is caused, on the one hand, by a lower concentration of electrons and, on the other hand, by a strong electronelectron correlation whose role with decreasing temperature increases as the phase transition temperature is approached. The temperature dependence of the electrical conductivity of the insulating phase of V₃O₅ has been explained in the framework of the theory of hopping conduction, which takes into account the effect of thermal vibrations of atoms on the resonance integral.     

Temperature dependent surface and spectral modifications of nano V<Subscript>2</Subscript>O<Subscript>5</Subscript> films

Nanocrystalline V₂O₅ films have been deposited on glass substrates at 300°C substrate temperature using thermal evaporation technique and were subjected to thermal annealing at different temperatures 350, 400, and 550°C. X-ray diffraction (XRD) spectra exhibit sharper and broader characteristic peaks respectively indicating the rearrangement of nanocrystallite phases with annealing temperatures. Other phases of vanadium oxides started emerging with the rise in annealing temperature and the sample converted completely to VO₂ (B) phase at 550°C annealing. FESEM images showed an increase in crystallite size with 350 and 400°C annealing temperatures followed by a decrease in crystallite size for the sample annealed at 550°C. Transmission spectra showed an initial redshift of the fundamental band edge with 350 and 400°C while a blue shift for the sample annealed at 550°C, which was in agreement with XRD and SEM results. The films exhibited smart window properties as well as nanorod growth at specific annealing temperatures. Apart from showing the PL and defect related peaks, PL studies also supported the observations made in the transmission spectra.     

Electronic structure of A15-type compounds: V<Subscript>3</Subscript>Co,V<Subscript>3</Subscript>Rh,V<Subscript>3</Subscript>Ir and V<Subscript>3</Subscript>Os

Band structure and Fermi surfaces of the A₃B compounds V₃Co, V₃Rh, V₃Ir and V₃Os are calculated in FP-LAPW calculations. From V₃Co to the V₃Os compound one observes a decrease of the overlap for d-states from both V and B atoms; the center of gravity of the d-band for V moves upwards, while for the B-atom it moves toward lower energies. Hence, despite the band widening, a weakening of interactions takes place throughout this series, which leads to a lattice expansion as experimentally observed. The bonding mechanism in these compounds is found to be dominated by the lower energy d-states. Comparatively, the DOS at E_F does not change appreciably between these compounds, except for V₃Os, where a sharp peak is observed at E_F. This feature leads to the highest electronic heat-capacity coefficient γ (2.31 ) in this compound, which otherwise possesses the smallest Bulk modulus (209.05 GPa). In V₃Os, for whom no report has been found, a stronger admixture between p-states from both metals near E_F is observed, and the Os d-states form a common d-band with the V d-states between 0.4–0.6 Ry. A stronger s–s hybridization is observed for V₃Co, which is in the source of the fact that this compound has an anomalously large quadrupole interaction and exhibits a positive Knight shift.     

Structure,lattice dynamics,and exchange interaction in Lu<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>, Y<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>: an ab initio approach

Ab initio calculations of the crystal structure and fundamental vibrations of vanadium pyrochlores Lu₂V₂O₇ and Y₂V₂O₇ are performed. The calculations are performed in the framework of the density functional theory (DFT) with the use of hybrid functionals. The ions involved in the vibrations are determined by the isotope substitution method. Values of the isotropic exchange interaction constant were calculated. Theoretical results for the crystal structure parameters, the vibrational frequencies, and the isotropic exchange interaction parameter are compared with the experimental data.     

V<Subscript>2</Subscript>O<Subscript>5</Subscript>-SiO<Subscript>2</Subscript> hybrid as anode material for aqueous rechargeable lithium batteries

V₂O₅-SiO₂ hybrid material was fabricated by heat-treating a mixture of H₂SiO₃ and V₂O₅. SEM, TEM, XRD, and N₂ isotherm analyses were performed to characterize the morphology and structure details of the as-prepared V₂O₅-SiO₂. The possibility of using the as-prepared V₂O₅-SiO₂ as anode material for aqueous lithium-ion batteries was investigated. Potentiostatic and galvanostatic results indicated that the intercalation/de-intercalation of Li⁺ in this material in aqueous electrolyte was quasi-reversible. It was also found that a discharge capacity of up to 199.1 mAh g^?1 was obtained at a current density of 50 mA g^?1 in aqueous solution of 1 M Li₂SO₄, a value which is much higher than the available reported capacities of vanadium (+5) oxides in aqueous electrolytes.     

Conductivity and spectroscopic studies of Li<Subscript>2</Subscript>O-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

Lithium vanadium-borate glasses with the composition of 0.3Li₂O–(0.7-x)B₂O₃–xV₂O₅ (x?=?0.3, 0.325, 0.35, 0.375, 0.4, 0.425, 0.45, and 0.475) were prepared by melt-quenching method. According to differential scanning calorimetry data, vanadium oxide acts as both glass former and glass modifier, since the thermal stability of glasses decreases with an increase in V₂O₅ concentration. Fourier transform infrared spectroscopy data show that the vibrations of [VO₄] structural units occur at V₂O₅ concentration of 45 mol%. It is established that the concentration of V⁴⁺ ions increases exponentially with the growth of vanadium oxide concentration. Direct and alternative current measurements are carried out to estimate the contribution both electronic and ionic conductivities to the value of total conductivity. It is shown that the electronic conductivity is predominant in the total one. The glass having the composition of 0.3Li₂O-0.275B₂O₃-0.475V₂O₅ shows the highest electrical conductivity that has the value of 7.4?×?10^?5 S cm^?1 at room temperature.     

Synthesis,sintering, and conductivity of Mn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>

Studies on the sintering of manganese pyrovanadate depending on the temperature and the crystallite size show that we are prevented from obtaining a bulk ceramic sample by the anisotropic growth of grains. Investigation of the electrical properties of Mn₂V₂O₇ in the temperature range of 250–800°C reveals the activation energy at which bulk conductivity is 0.62 eV.     

Ordered monoclinic vanadium suboxide V<Subscript>14</Subscript>O<Subscript>6</Subscript>

The monoclinic (space group C2/m) superstructure of the suboxide V₁₄O₆, which is formed as a result of the atomic and vacancy ordering of the tetragonal solid solution of oxygen in vanadium, is investigated using X-ray diffraction and symmetry analysis. The monoclinic suboxide V₁₄O₆ is observed in the vanadium oxide samples VO_0.57, VO_0.81, and VO_0.86 synthesized at 1770 K and the samples VO _y (0.87 ≤ y ≤ 0.98) additionally annealed at 1470 K after the synthesis. It is established that the channel of the disorder-order phase transition associated with the formation of the monoclinic suboxide V₁₄O₆ includes six superstructure vectors belonging to three non-Lifshitz stars of one type {k ₁}. The distribution function of the oxygen atoms in the monoclinic superstructure of the suboxide V₁₄O₆ is calculated. It is demonstrated that the displacements of vanadium atoms distort the body-centered tetragonal metal sublattice, thus preparing the formation of the facecentered cubic sublattice and the transition from the suboxide V₁₄O₆ to the cubic vanadium monoxide with the B1 structure.     

Studies on Al<Subscript>2</Subscript>O<Subscript>3</Subscript>, CuO,and TiO<Subscript>2</Subscript> water-based nanofluids: A comparative approach in laminar and turbulent flow

The Prandtl number, Reynolds number and Nusselt number are functions of thermophysical properties of nanofluids, and these numbers strongly influence the convective heat transfer coefficient. The thermophysical properties vary with volumetric concentration of nanofluids. Therefore, a comprehensive analysis was performed to evaluate the effects on the performance of nanofluids due to variations of density, specific heat, thermal conductivity and viscosity, which are functions of nanoparticle volume concentration. Three metallic oxides, aluminum oxide (Al₂O₃), copper oxide (CuO), and titanium dioxide (TiO₂), dispersed in water as the base fluid were studied. A convenient figure of merit, known as the Mouromtseff number, is used as a base of comparisonfor laminar and turbulent flows. The results indicated that the considered nanofluids can successfully replace water in specific applications for a single-phase forced convection flow in a tube.     

Spin-wave resonances in Eu<Subscript>0.8</Subscript>Ce<Subscript>0.2</Subscript>Mn<Subscript>2</Subscript>O<Subscript>5</Subscript> and EuMn<Subscript>2</Subscript>O<Subscript>5</Subscript> multiferroics

Spin-wave resonances have been observed in superlattices arising due to the phase separation and self-organization of charge carriers in Eu_0.8Ce_0.2Mn₂O₅ single crystals. The resonances are found within the 5–80 K temperature range at frequencies close to 30 GHz. Similar resonances with intensities about an order of magnitude lower are also observed in EuMn₂O₅. The latter suggests the existence of charge transfer processes between the manganese ions of different valences in EuMn₂O₅.