超短光脉冲波形研究

本文讨论了光脉冲技术发展中的脉冲波形测量问题。介绍了一种通用的光脉冲波形测量新方法,该方法可以给出光脉冲的波形、脉宽以及光脉冲内含的频率啁啾信息。这种测量方法已应用于半导体激光器产生ps光脉冲的实验研究,其可行性得到了验证。     

Generation of high harmonics and attosecond pulses with ultrashort laser pulse filaments and conical waves

Results illustrating the nonlinear dynamics of ultrashort laser pulse filamentation in gases are presented, with particular emphasis on the filament properties useful for developing attosecond light sources. Two aspects of ultrashort pulse filaments are specifically discussed: (i) numerical simulation results on pulse self-compression by filamentation in a gas cell filled with noble gas. Measurements of high harmonics generated by the pulse extracted from the filament allows for the detection of intensity spikes and subcycle pulses generated within the filament. (ii) Simulation results on the spontaneous formation of conical wavepackets during filamentation in gases, which in turn can be used as efficient driving pulses for the generation of high harmonics and isolated attosecond pulses.     

Long-distance femtosecond laser filaments in air

This paper reviews the recent studies of filamentation of femtosecond lasers pulses in air in the Institute of Physics, Chinese Academy of Sciences. The filamentation mechanisms of free propagated femtosecond laser pulses, effect of air turbulence on the filamentation, interaction between filaments are presented.     

Filamentation of interacting femtosecond laser pulses in air

The filamentation of two co-propagated femtosecond (fs) laser pulses in air is studied by numerical simulation. Depending on the different initial separation distances, relative phase shift and crossing angles, simulations show attraction, fusion, repulsion and collision of the two pulses. A long plasma channel can be formed by two in-phase pulses with small separation distance and cross angle. The coupling of two laser beam becomes weaker when the separation distance or cross angle between two beams is larger. In this case, the filamentation of each pulse develops independently. Our simulation results will be helpful for understanding the effect of the initial amplitude and phase modulation of laser pulse on the filamentation characteristics.     

Diffraction-Ray Model of Single Filamentation of Femtosecond Laser Pulses for Estimating the Characteristics of the Multiple Filamentation Domain in Air

Russian Physics Journal - The characteristics of the multiple filamentation domain of femtosecond laser pulses in air have been estimated based on the single filamentation model. The...     

激光啁啾对激光等离子体细丝传输的影响

对不同啁啾状态下的飞秒激光在大气中的成丝过程进行了研究.实验研究发现成丝状况及其演化与初始激光脉冲的啁啾状态密切相关，适当的负啁啾有利于激光的成丝传输.当初始激光脉冲的啁啾量不断变大时，激光脉冲在大气中的成丝起点位置会逐渐变远.还研究了初始脉冲啁啾量对使用聚焦透镜产生的细丝的影响，发现其与自由传输情况具有相似的变化规律. 关键词： 飞秒激光等离子体通道 脉冲啁啾     

Amplification of femtosecond laser filaments in Ti:sapphire

Femtosecond laser filamentation is studied in a broadband amplifying medium, sapphire doped with electronically excited Ti ions. Evidence for fluence amplification of self-guided pulses, increase of filamentation length, as well as a lowering of the input laser power necessary for filamentation is reported.     

Laser-filamentation-induced condensation and snow formation in a cloud chamber

Using 1 kHz, 9 mJ femtosecond laser pulses, we demonstrate laser-filamentation-induced spectacular snow formation in a cloud chamber. An intense updraft of warm moist air is generated owing to the continuous heating by the high-repetition filamentation. As it encounters the cold air above, water condensation and large-sized particles spread unevenly across the whole cloud chamber via convection and cyclone like action on a macroscopic scale. This indicates that high-repetition filamentation plays a significant role in macroscopic laser-induced water condensation and snow formation.     

半导体激光放大器用于啁啾补偿的研究

详细分析了饱和工作状态下的行波半导体激光放大器的啁啾特性，从理论上证了实了利用其增益饱和所引起的自相位调制来对光源啁啾和光纤色散进行啁啾补偿的可行性，并且发现，对于不同脉宽的入射脉冲，光放大器均能发挥相位补偿的作用，这一特性可用来在长距离光纤传输系统中，对微弱啁光脉冲同时进行能量和相位的补偿。     

Chirp control of femtosecond laser-filamentation-induced snow formation in a cloud chamber

Filamentation-induced water condensation and snow formation are investigated using laser pulses with different chirps and pulse widths. Chirped pulses result in the laser filamentation with different spatial lengths and intensities, which has a great impact on airflow motion and snow formation. The experiments show that snow formation mainly relates to the filament intensity distribution. Negative chirped pulses produce a greater amount of snow because of higher intensity inside the filaments as compared with the positive chirped pulses.     

激光大气成丝中的非线性光频转换

超快强激光在光学介质（如空气）中传播时由于克尔自聚焦效应和等离体散焦效应动态平 衡会发生一种独特的非线性激光成丝现象。激光成丝过程会诱导一些独特的物理现象,如非线性 光频转换产生超连续光谱、等离子体诱导高压放电、锥形辐射等,在大气传感、天气控制等研究 领域具有重要的应用前景。本文针对飞秒激光大气成丝过程中与传输介质相互作用所诱导的非线 性发光过程,介绍了激光大气成丝所产生的超连续光谱（白光）激光、谐波产生和太赫兹波辐射 三种非线性光频转换现象,并着重探讨了太赫兹波辐射的物理机理、研究现状和应用前景。     

Interference model of femtosecond laser pulse conical emission in dispersive medium

A simple interference model is proposed for conical emission frequency-angular spectrum formation during the filamentation of femtosecond laser pulse in a nonlinear dispersive medium. The model allows to obtain analytical expressions for frequency-angular distributions of the supercontinuum spectral components of pulses at different wavelengths in media with arbitrary material dispersion law. The model reproduces the supercontinuum frequency-angular spectrum transformation for the case of laser pulse splitting into several subpulses and for multiple refocusing of the light field in filament. Frequency-angular spectra analytically calculated from the proposed interference model are in good agreement with the results of numerical simulations performed for the filamentation of femtosecond laser pulses in fused silica.     

Deterministic vectorial effects lead to multiple filamentation

The standard explanation for multiple filamentation of laser pulses is that it is caused by noise in the input beam. We propose an alternative explanation that is based on deterministic vectorial (polarization) effects. We present numerical simulations in support of the vectorial-effects explanation and suggest a simple experiment for deciding whether multiple filamentation is due to vectorial effects.     

10-mJ optically synchronized CEP-stable chirped parametric amplifier at 1.5 μm

We demonstrate the generation of 10-mJ 1.5-μm few-cycle pulses from a 4-stage OPCPA system. The system is based on a fusion of femtosecond DPSS Yb technology and a picosecond Nd:YAG pump laser. In a first preliminary filamentation experiment in argon at 5 atm, we observe significant spectral broadening of the recompressed multi-mJ 1.5-μm pulses. The filamentation output spectrum supports the generation of 8 fs pulses equivalent to sub-to-cycle pulses at 1.5 μm. We foresee that our terawatt-peak-power sub-to-cycle pulse source will open the door to exciting new experiments in attosecond high-field science in the near future.

     

Control of femtosecond laser written waveguides in silica glass

Writing conditions for the fabrication of optical waveguides in bulk fused silica glass by use of 1 kHz focused femtosecond laser pulses at 800 nm were systematically determined for different focusing geometries. The results demonstrate that waveguides can be formed based on optical breakdown, filamentation (single or multiple), or a combination of both processes, when using pulse energies lower than the threshold of structural damage. The mechanisms of laser-induced index change are also discussed. PACS 42.65.Jx; 42.70.Ce; 42.79.Gn     

Tunable ultrashort laser pulses generated through filamentation in gases

Tunable and stable ultrashort laser pulses in the visible spectrum are generated with high efficiency by four-wave mixing process during the filamentation of near-infrared and infrared laser pulses in gases. It is shown that these tunable ultrashort pulses have a very low energy fluctuation and an excellent mode quality due to the processes of intensity clamping and self-filtering in the filament.     

Optimization of highly efficient terahertz generation in lithium niobate driven by Ti:sapphire laser pulses with 30 fs pulse duration

We systematically study the optimization of highly efficient terahertz(THz) generation in lithium niobate(LN)crystal pumped by 800 nm laser pulses with 30 fs pulse duration. At room temperature, we obtain a record optical-to-THz energy conversion efficiency of 0.43% by chirping the pump laser pulses. Our method provides a new technique for producing millijoule THz radiation in LN via optical rectification driven by joule-level Ti:sapphire laser systems, which deliver sub-50-fs pulse durations.     

Influence of Initial Pulse Chirp on Rainbow-Like Supercontinuum Generation from Filamentation in Air

Supereontinuum （SC） generation from laser filamentation in air is found to depend strongly on the pulse duration. Rainbow-like SC generation is observed only for a pulse of appropriate negative chirp that agrees with the predictions put forward by Golubtsov et al. [Quantum Electron. 33 （2003） 525]. The conversion efficiency of an 800-nm laser light to rainbow-like SC is found to be the highest for 257fs pulses with an initial negative chirp. A larger chirp will lead to filamentation surviving at longer distance.     

Formation of defects in lithium fluoride ceramics upon irradiation with femtosecond laser pulses

The interaction between femtosecond laser radiation in the filamentation mode and lithium fluoride optical ceramics is investigated experimentally. It is shown that irradiating optical ceramics based on lithium fluoride with femtosecond laser pulses in the near infrared spectral region effectively produces luminescence centers characteristic of radiation-colored single crystals.