聚苯醚合金的增容技术

介绍了增容剂的作用及其分类方法，详细综述了ＰＰＯ合金的各种增容技术，包括添加高分子和低分子增容剂，以及ＰＰＯ的官能化方法和由它而实现的原位增容，同时给出了各种增容剂的增容机理。     

共聚物增容剂对高分子共混物形态与流变行为的影响

共聚物增容剂可以提高不相容高分子共混物两相的相容性,从而强化共混物的宏观机械性能。增容剂通过对共混物界面性质的改善,对共混物的相形态和粘弹性都有很大的影响。目前对增容作用的研究已不再局限于对其增容原理的探索及增容效果的评价,还集中于揭示增容剂对高分子共混物在流场下的形态演变与流变行为的影响。本文从上述方面对近期的研究进展进行了总结,并归纳了增容剂的分子结构、加工条件等因素对流场下增容体系微观结构形成的影响。     

增容聚苯乙烯共混物的研究进展

综述了增容聚苯乙烯与聚乙烯、聚丙烯、聚酰胺共混物的研究进展。不同共混物采用不同的增容剂,可使增容聚苯乙烯共混物改善分散相尺寸、界面相互作用与粘结,达到提高共混物的力学性能的目的。增容效果与增容剂的类型、用量和分子结构有关。     

用于聚合物共混体系的共聚物增容剂

在不相容多相聚合物体系中，共聚物增容剂的存在将对共混物的形态结构及力学性能产生极大的影响，它们的作用是增强相间粘合力，减小相表面张力。本文系统论述了共聚物增容剂的分子设计及其分子特性对增容效果的影响，并分别讨论了反应型及非反应型共聚物增容剂的近期发展。     

接枝共聚物EPR-g-PS作PS/EPDM共混体系增容剂的探讨

使用了由大分子单体共聚合制备的以乙丙橡胶(EPR)为主干、聚苯乙烯(PS)为支链的接枝共聚物EPR-g-PS作为PS/EPDM共混体系的增容剂。实验结果表明,共混体系的组成、增容剂加入量以及增容剂分子结构对共混体系冲击强度有很大影响。将这些因素与相差显微镜及扫描电镜研究所揭示的共混物形态的变化相联系,对此类接校共聚物作为不相容体系增容剂的机理作了探讨。     

聚合物合金的原位增容

介绍了增容剂的作用和分类,详细描述了不同反应类型的聚合物合金原位反应增容,对利用马来酸酐(MAH)、甲基丙烯酸缩水甘油酯(GMA)等官能团反应的原位增容体系进行了分类介绍,同时给出各种原位增容反应的增容机理。     

稳态和振荡剪切流动下聚合物共混反应体系演化的格子玻尔兹曼模拟

采用A/B/S三元共混体系为模型体系,其中S由A和B通过可逆的化学反应生成并充当增容剂.我们采用自由能形式的格子玻尔兹曼模拟方法,考察了在稳态及振荡剪切流动下化学反应速率、剪切速率和振荡频率对体系形态结构演化的影响.模拟给出了增容剂平均密度和空间分布随时间的演化,结果表明增容剂S的生成能有效地降低分散相的尺寸,并且通过控制化学反应速率、剪切速率和振荡频率能够有效地调控增容剂在体系中的分布,从而为控制反应共混体系的形态结构提供帮助.     

增容剂对煤直接液化残渣改性沥青低温性能的影响

为了评价不同增容剂对煤直接液化残渣改性沥青低温性能的影响,首先,通过正交实验确定出三种增容剂（硅烷偶联剂、苯甲醛、二甲苯）各自的最佳掺量及掺入方式;其次,采用双边缺口拉伸（DENT）试验评价加入三种增容剂后沥青的低温抗延性断裂性能;最后,结合SEM照片并利用Image Pro plus图像处理软件计算加入三种增容剂后沥青中煤直接液化残渣的分散面积比,以定量地表征三种增容剂对煤直接液化残渣改性沥青低温性能的改善效果。结果表明,加入适量增容剂在一定程度上有助于煤直接液化残渣在沥青中的分散,提高两者之间的相容性,保持煤直接液化残渣改性沥青体系的长期稳定状态,避免因煤直接液化残渣的沉淀聚集而在相界面产生应力集中,增强煤直接液化残渣改性沥青的低温抗延性断裂性能。三种增容剂对煤直接液化残渣改性沥青低温性能改善效果不同,硅烷偶联剂最优,次之为苯甲醛,最差为二甲苯。     

壳聚糖接枝尼龙64及其增容性

壳聚糖接枝尼龙64及其增容性;壳聚糖;尼龙;接枝;共混;增容剂     

PBSA-g-MG增容改性热塑性淀粉/PBSA复合材料

以过氧化二异丙苯(DCP)为引发剂,通过熔融接枝将马来酸酐(MA)和甲基丙烯酸缩水甘油酯(GMA)接枝到PBSA(聚丁二酸/聚己二酸-co-丁二醇酯)分子链上,制备了PBSA-g-MG增容剂。采用红外光谱和核磁共振氢谱对增容剂的化学结构进行表征,并探究了PBSA-g-MG的添加量对热塑性淀粉(TPS)与PBSA复合材料(TPS/PBSA)的力学性能、微观形貌、动态热机械性能和吸水性能的影响。结果表明,该增容剂可改善纤维增强的TPS/PBSA复合材料的界面相容性,TPS相与PBSA相的T_g相互靠近,TPS/PBSA的力学性能和耐水性提高。添加质量分数8%增容剂的TPS/PBSA复合材料在59%湿度下的力学强度可达19.4 MPa,比未增容的复合材料提高了将近130%。     

胶粉/热塑性塑料共混材料的研究

以胶粉及通用塑料PP和LLDPE为原料,研究了原料种类、相容剂等对胶粉/热塑性塑料共混材料性能的影响,制得了性能较好的共混材料。通过热分析和扫描电镜对制得的共混材料进行分析表征,表明胶粉和LLDPE有较好的相容性及较强的结合力。     

Polymethylene‐b‐polystyrene diblock copolymer: Synthesis,property, and application

The design and synthesis of well‐defined polymethylene‐b‐polystyrene (PM‐b‐PS, M_n = 1.3 × 10⁴–3.0 × 10⁴ g/mol; M_w/M_n (GPC) = 1.08–1.18) diblock copolymers by the combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) was successfully achieved. The ¹H NMR spectrum and GPC traces of PM‐b‐PS indicated the successful extension of PS segment on the PM macroinitiator. The micellization behavior of such diblock copolymers in tetrahydrofuran were characterized by dynamic light scattering (DLS) and atomic force microscopy (AFM) techniques. The average aggregate sizes of PM‐b‐PS diblock copolymers with the same length of PM segment in tetrahydrofuran solution (1.0 mg mL^?1) increases from 104.2 nm to 167.7 nm when the molecular weight of PS segment increases. The spherical precipitated aggregates of PM‐b‐PS diblock copolymers with an average diameter of 600 nm were observed by AFM. Honeycomb porous films with the average diameter of 3.0 μm and 6.0 μm, respectively, were successfully fabricated using the solution of PM‐b‐PS diblock copolymers in carbon disulfide via the breath‐figure (BF) method under a static humid condition. The cross‐sections of low density polyethylene (LDPE)/polystyrene (PS)/PM‐b‐PS and LDPE/polycarbonate (PC)/PM‐b‐PS blends were observed by scanning electron microscope and reveal that the PM‐b‐PS diblock copolymers are effective compatilizers for LDPE/PS and LDPE/PC blends. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1894–1900, 2010     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Study of the thermodynamics of adsorption of hydrolyzed modified polyacrylnitrile

The thermodynamics of adsorption has been studied of hydrolyzed modified polyacrylnitrile (HMP) in water solutions with a concentration ranging from 0.25 g/l to 2.00 g/l on bleached sulphate and unbleached and bleached sulphite celluloses at temperatures of 0, 20, 40, and 60 C.It has been established that with the rise in temperature, the amount of adsorbed polymer —(HMP) decreases. The values of the enthalpy change are negative and show a linear decrease with the increase in the amount of adsorbed polymer. The adsorption equilibrium is defined by the logarithmic isotherm of Tjumkin, valid for uniform heterogeneous surfaces.With the increase in the amount of adsorbed HMP the values of the entropy change become negative and linearly decrease. A compensation effect has been noticed which results from the simultaneous action of the entropy and energy factors.The values of the change of the chemical potential for the three types of cellulose are negative and linearly decrease with the increase in the amount of adsorbed HMP and with the rise in temperature.     

Application of exploratory data analysis for the characterization of tubular wells of the North of Brazil

Roraima is located in the extreme North of Brazil, in the Western Amazon Region. The groundwater has an important role in the public supply of potable water on the Roraima State. The objective of this work is the application of PCA (Principal Component Analysis) and HCA (Hierarchical Cluster Analysis) for the characterisation of tubular wells of the Roraima State, as regards physical–chemical composition of water. The parameters analyzed in laboratory were the following ones: pH, electric conductivity, Total Hardness, Total Alkalinity, Bicarbonate, Calcium, Potassium, Magnesium, Nitrate, Chloride, Total Iron. The physical–chemical analyses, were carried out during the months of September and October 2000 (winter, period of rains). The laboratory analysis was performed using classical methods (titrimetry and uv–visible spectroscopy), the samples were processed in agreement with the Standard Methods for Examination of Water and Wastewater.The physical–chemical analyses, were accomplished in September and October 2000. In physical–chemical terms, the groundwater samples analyzed do not indicate any restriction to human consumption and the two chemometric methods of exploratory data analysis: PCA and HCA are efficient for the discrimination of bicarbonated (tubular wells locateds in the South of the Roraima State) and not bicarbonated (tubular wells locateds in the North of Roraima) groundwater.     

The use of surfactants in the cleaning of works of art

Surfactants have been historically used for cleaning artifacts, but it was only in the last decades that serendipitous approaches were replaced by research in the field of soft matter and colloid science. Surfactants are components of nanostructured fluids, which were assessed for the removal of soil and aged coatings from paintings and are fundamental in processes that range from the inclusion of grime in micelles to the swelling and dewetting of polymer layers. Intriguing aspects involve the synthesis and use of biodegradable and self-cleavable surfactants, and the confinement of nanostructured fluids in gels, which boost the selectiveness of cleaning interventions. The performances of these advanced systems surpass those of traditional cleaning materials such as solvent blends and thickeners. The most important results are here reviewed and future perspectives given. Besides granting the transfer of cultural heritage to future generations, advanced cleaning materials are relevant to transversal fields, such as detergency, cosmetics, and drug delivery.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Kinetics of thermal decomposition of hexanitrohexaazaisowurtzitane

Thermal decomposition of hexanitrohexaazaisowurtzitane (HNIW) in the solid state and in solution was studied by thermogravimetry, manometry, optical microscopy, and IR spectroscopy. The kinetics of the reaction in the solid state is described by the first-order equation of autocatalysis. The rate constants and activation parameters of HNIW thermal decomposition in the solid state and solution were determined. The content of N₂ amounts to approximately half of the gaseous products of HNIW thermolysis. The thermolysis of HNIW and its burning are accompanied by the formation of a condensed residue. During these processes, five of six nitro groups of the HNIW molecule are removed, and one NO₂ group remains in the residue, which contains amino groups and no C−H bonds. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 5, pp. 815–821, May, 2000.     

Pulse polarographic determination of the complexation capacity of various organic phosphonates of heavy metals with the aid of design of experiments

This study presents the determination of the complexation capacity of phosphonates (ATMP, EDTMP, and DTPMP) by differential pulse polarography. All of them are non-volatile, stable in water samples, and resistant to hydrolysis. Therefore, their decomposition rate in natural water is low. The metal complexation capacity of these phosphonates was detected for cobalt, copper, and zinc ions. DTPMP is the best of the investigated chelating agents for these three metal ions.Owing to the environmental fate of aminocarboxylates, these were often replaced by phosphonates. Therefore, we compared NTA and EDTA with ATMP and EDTMP according to their Zn-CC and could find out approximately four times higher complexation of zinc ions by phosphonates than by aminocarboxylates.Furthermore, the interaction between phosphonates and the influence of iron ions on the Zn-CC were investigated by chemometric means. The design of experiments indicated no significant interaction in phosphonate mixtures but significant influence of iron ions. Thus, the complexation capacity of a mixture of ATMP, EDTMP, and DTPMP can be calculated by the addition of several individual Zn-CC of the phosphonates according to their percentage in the mixture. A similar calculation is impossible in the presence of iron ions.     

青海湖区河谷灌丛主要植物微量元素含量特征

采集青海湖地区沙柳河河谷灌丛14种主要植物，采用AAS分析了其中7种微量元素含量。结果表明，元素Cu、Mn、Co含量有较大的植物种问差异，7种微量元素中Se含量最小，Fe含量最大。元素Mn和Fe、Co、Ni之间都具有极显著的正相关性，即相互之间具有协同性作用。