Determination of amitrole and urazole in water samples by capillary zone electrophoresis using simultaneous UV and amperometrical detection

In this paper, capillary zone electrophoresis with amperometric detection (CZE-AD) was first applied to the simultaneous separation and determination of amitrole and urazole in water samples. A simple end-column electrochemical detector was used in combination with a commercially available capillary electrophoresis instrument with UV detection. The effects of several important factors were investigated to find optimum conditions. A carbon disk electrode was used as working electrode. Separation and determination of these compounds in water samples were performed in 0.030 mol l(-1) acetate buffers at pH 4.5, 25 kV as separation voltage and the samples were introduced by hydrodynamic mode for 1.5 s. Most of the studies realized showed that the direct electrochemical detection is more sensitive and selective than UV detection. Under the optimum conditions, excellent linearity was observed between peak amperometric signal and analyte concentrations in the range of 0.19-1.35 mg l(-1) for amitrole and 0.20-1.62 mg l(-1) for urazole. The detection limits were 63 and 68 microg l(-1) for amitrole and urazole, respectively. The utility of this method was demonstrated by monitoring water samples, and the assay results were satisfactory. The detection limits using a previous preconcentration step for amitrole and urazole in spiked mineral water samples were 0.6 and 1.0 microg l(-1) for amitrole and urazole, respectively.     

Comparison of a non-aqueous capillary electrophoresis method with high performance liquid chromatography for the determination of herbicides and metabolites in water samples

A method of capillary electrophoresis (CE) for the determination of triazine herbicides and some of their main metabolites in water samples has been developed. The proposed CE method includes an off-line solid-phase extraction (SPE) procedure with LiChrolut EN sorbent coupled to a non-aqueous capillary electrophoresis (NACE) separation with UV detection. The target compounds were the chloro-s-triazines simazine, atrazine, propazine; the methyltio-s-triazines ametryn and prometryn and three main derivatives from the atrazine degradation products; namely, deethylatrazine, deethylhydroxyatrazine and deisopropylhydroxyatrazine. The analytical characteristics of the CE method are reported. The repeatability of the method was studied considering the different steps of the method separately in order to determine the contributions of each step to the total variability of the method. The NACE-UV results are compared with those obtained with a high performance liquid chromatography with UV detection (HPLC-UV) method. The same off-line SPE procedure was applied to both techniques. The results obtained show that both methods afford the same results in the analysis of surface and drinking water samples, with a level of significance regarding the F- and t-tests greater than 0.05 in all the cases. The detection limits in surface water samples were in the 0.04-0.32 microg l(-1) and 0.11-1.2 microg l(-1) ranges for the NACE-UV and HPLC-UV methods, respectively. The recoveries (spiked/found) were significantly 100% in all cases.     

Sample stacking with matrix removal for the determination of paraquat, diquat and difenzoquat in water by capillary electrophoresis

Conditions for the simultaneous determination of paraquat, diquat and difenzoquat by capillary zone electrophoresis using a stacking technique in a chemically modified capillary have been established. To apply the stacking method with sample matrix removal for the analysis of cations, an anodic electroosmotic flow is mandatory. For quats, 50 mM acetic acid-ammonium acetate (pH 4.0) with 5% (v/v) methanol as electrophoretic buffer and the addition of 0.8 mM cetyltrimethylammonium bromide as wall capillary organic modifier was proposed. Field polarity reversal time was optimised for several sample matrices. Detection was carried out at 220 and 255 nm. Detection limits, based on a signal-to-noise ratio of 3:1, were lower than 15 microg l(-1) for standards in Milli-Q water and two to ten times higher for drinking water samples. Run-to-run and day-to-day reproducibility have been established. The method was successfully applied to the determination of the three herbicides in spiked drinking water.     

Solid-phase extraction and sample stacking-capillary electrophoresis for the determination of quaternary ammonium herbicides in drinking water

Conditions for the simultaneous determination of paraquat, diquat and difenzoquat by capillary zone electrophoresis were established by combining two preconcentration procedures. Off-line solid-phase extraction was used for the isolation and preconcentration of quats in drinking water. Quats were then analysed by capillary electrophoresis using sample stacking with matrix removal as on-column preconcentration procedure. Two different porous graphitic carbon cartridges were compared. The breakthrough volumes of the three herbicides were calculated and the loading capacity of the sorbents was compared. Recoveries higher than 80% for difenzoquat and around 40% for paraquat and diquat were obtained when a sample volume of 250 ml was percolated. For the stacking-capillary electrophoresis analysis of quats, 50 mM acetic acid-ammonium acetate (pH 4.0), 0.8 mM cetyltrimethylammonium bromide with 5% (v/v) methanol as carrier electrolyte was used. Detection limits, based on a signal-to-noise ratio of 3:1, were lower than 0.3 microg l(-1) for standards in Milli-Q water, and lower than 2.2 microg l(-1) for drinking water samples. Run-to-run and day-to-day precision of the method were established. The two preconcentration procedures used together was successfully applied to the analysis of the three herbicides in spiked drinking water at concentrations below the maximum admissible US Environmental Protection Agency levels.     

Determination of haloacetic acids in aqueous environments by solid-phase extraction followed by ion-pair liquid chromatography-electrospray ionization mass spectrometric detection.

Haloacetic acids (HAAs) were determined in different water samples by a new, fast and simple analysis method based on enrichment of 50-ml water samples at pH 1.8 by solid-phase extraction (SPE) followed by liquid chromatography (LC) separation and electrospray ionization mass spectrometric detection in the negative ionization mode. Deprotonated (M-H)-haloacetates and decarboxylated (M-COOH)- ions were detected. Different polymeric SPE sorbents were tested, and LiChrolut EN was found to be the best material for the extraction. Complete LC separation of all compounds could only be achieved by ion-pair chromatography using triethylamine as volatile ion-pairing reagent. The detection limits were in the low microg/l range. High microg/l concentration levels for the chlorinated and brominated haloacetates were found in drinking water from a drinking water treatment plant in Barcelona, and the corresponding tap water. In swimming pool water samples from Catalonia mg/l levels and in surface river water from Portugal microg/l values were detected. These results confirm other recent reports on the ubiquitous occurrence of HAAs in aqueous environments.     

苯胺及其衍生物的毛细管电泳行为研究

采用紫外吸收检测，毛细管电泳分离，研究了九种苯胺及其衍生物在毛细管区带电泳(CZE)体系和胶束电动毛细管色谱(MECC)体系中的行为特征。讨论了缓冲溶液的浓度与pH、胶束浓度及混合胶束等在不同体系中对分离组分的影响，发现在CZE体系中，控制分离的主要因素是pKb值；在MECC体系中，控制分离的主要因素是溶质分子中碳原子数。建立了一种分离测定九种苯胺及其衍生物的高效毛细管电泳方法。     

Separation and direct UV detection of lanthanides complexed with pyridine-2-carboxylic acid by capillary electrophoresis

Separation and detection of lanthanides by capillary zone electrophoresis in the presence of pyridine-2-carboxylic acid (picolinic acid) as UV-absorbing complexing agent were investigated. The resolution of partially complexed positively charged complexes is improved by using two buffer ligands competing with picolinic acid for metal ions. When hydroxyisobutyric acid (HIBA) and formic acid are used together as competing ligands, this provides complete separation of all 14 lanthanides with good peak shapes. An on-column separation of 14 lanthanides was achieved in only 9 min using 0.8 mmol/l picolinic acid, 10 mmol/l HIBA and 25 mmol/l formic acid at pH 4.7. Determination of lanthanide complexes was performed by direct detection at 210 nm. Detection limits (signal-to-noise ratio=3) are ca. 0.53-0.96 microg/ml.     

Quantitative determination of sulfur-containing anions in complex matrices with capillary electrophoresis and conductivity detection.

The analysis of sulfur species in complex matrices, like environmentally related samples, requires selective and sensitive as well as robust determination methods. As many as possible different anions need to be quantified in a reasonable analysis time. Besides ion chromatography, capillary electrophoresis has proven to be a very efficient technique for the separation and determination of ionic compounds. With the advantages of less sample and solvent consumption compared to conventional LC, short separation time, inexpensive and robust capillaries, CE was used to separate the anions sulfate, sulfite, thiosulfate, thiocyanate and sulfide. Detection and injection modes and the composition of the separation buffers have been varied to find the most suitable conditions. Conductivity detection after electrokinetic sample injection and improvement of calibration linearity allowed the determination of sulfur containing anions with low limits of detection (8 to 50 micrograms/l). The developed CE method was applied to the analysis of water from an open-pit mining lake.     

Ionic liquid for high temperature headspace liquid-phase microextraction of chlorinated anilines in environmental water samples

Based on the non-volatility of room temperature ionic liquids (IL), 1-butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) IL was employed as an advantageous extraction solvent for high temperature headspace liquid-phase microextraction (LPME) of chloroanilines in environmental water samples. At high temperature of 90 degrees C, 4-chloroaniline, 2-chloroaniline, 3,4-dichloroaniline, and 2,4-dichloroaniline were extracted into a 10 microl drop of [C4MIM][PF6] suspended on the needle of a high-performance liquid chromatography (HPLC) microsyringe held at the headspace of the samples. Then, the IL was injected directly into the HPLC system for determination. Parameters related to LPME were optimized, and high selectivity and low detection limits of the four chlorinated anilines were obtained because the extraction was performed at high temperature in headspace mode and the very high affinity between IL and chlorinated anilines. The proposed procedure was applied for the analysis of the real samples including tap water, river water and wastewater samples from a petrochemical plant and a printworks, and only 3,4-dichloroaniline was detected in the printworks wastewater at 88.2 microg l(-1) level. The recoveries for the four chlorinated anilines in the four samples were all in the range of 81.9-99.6% at 25 microg l(-1) spiked level.     

Analysis of food colorants by capillary electrophoresis with large-volume sample stacking

A technique combining an on-capillary concentration method known as large-volume sample stacking and high-efficiency CE separation has been developed to analyze and detect colorants in several food samples, such as soft drinks, jellies and milk beverages. Following optimization, this technique significantly reduced the limits of detection of eight food colorants commonly used in food products by up to two orders of magnitude when compared with the conventional capillary electrophoresis method. The developed technique was able to successfully determine colorants in food samples that had concentrations as low as 0.1-0.5 microg/ml.     

Determination of tryptamine derivatives in illicit synthetic drugs by capillary electrophoresis and ultraviolet laser-induced fluorescence detection

A method based on separation by capillary electrophoresis combined with UV-laser-induced fluorescence detection (Lambdaex = 266 nm) was developed for the determination of nine tryptamine derivatives of forensic interest and potential matrix constituents. The composition of the separation electrolyte was optimized with respect to the resolution of solutes of interest and to the sensitivity of fluorescence detection. Native alpha-cyclodextrin was employed as a complex forming modifier of the electrophoretic separation and fluorescence-enhancing agent. With the help of a stacking procedure, limits of detection of 0.1-6 microg/L for all analytes were obtained. The repeatability for the peak area (at a concentration of the analyte about 100 times the LOD) was less than 2.3% RSD. A second HPLC method was developed, and its analytical parameters were evaluated for an estimation of the accuracy of the CE-LIF method and for method comparison. The results of the determination of tryptamine derivatives in the samples of forensic interest obtained with the two independent methods are in good agreement.     

Chiral separation of the β2‐sympathomimetic fenoterol by HPLC and capillary zone electrophoresis for pharmacokinetic studies

The development of methods for the separation of the enantiomers of fenoterol by chiral HPLC and capillary zone electrophoresis (CZE) is described. For the HPLC separation precolumn fluorescence derivatization with naphthyl isocyanate was applied. The resulting urea derivatives were resolved on a cellulose tris(3,5‐dimethylphenylcarbamate)‐coated silica gel column employing a column switching procedure. Detection was carried out fluorimetrically with a detection limit in the low ng/mL range. The method was adapted to the determination of fenoterol enantiomers in rat heart perfusates using liquid–liquid extraction. As an alternative a CE method was used for the direct separation of fenoterol enantiomers comparing different cyclodextrin derivatives as chiral selectors. Copyright © 2010 John Wiley & Sons, Ltd.     

Electrically driven microseparation methods for pesticides and metabolites: V. Micellar electrokinetic capillary chromatography of aniline pesticidic metabolites derivatized with fluorescein isothiocyanate and their detection in real water at low levels by laser-induced fluorescence

Anilines are important pollutants occurring in the environment as industrial discharges as well as the transformation products (i.e., metabolites) of a wide variety of commonly used pesticides. In this report, we describe the precolumn derivatization of anilines with fluorescein isothiocyanate (FITC) and their subsequent separation and detection by capillary electrophoresis-laser induced fluorescence (CE-LIF) detection. The FITC-aniline derivatives were readily detected at the 10(-10) M level. This limit of detection (LOD) was achieved in the presence of glycosidic surfactants complexed with borate at alkaline pH yielding the so-called in situ charged micelles. The glycosidic surfactants evaluated were n-octyl- and n-nonylglucopyranoside. Furthermore, and under optimum conditions, the FITC precolumn derivatization of the anilines was performed in real water (e.g., tap and lake water) spiked with anilines at the LOD level. The water matrices showed marginal effects on the extent of derivatization at the LOD level, and the possible interferents in the water samples did not affect the FITC-solute signal due to the selectivity of the derivatization and detection schemes. Besides filtration from microparticles, the real water samples did not necessitate extensive sample cleanup prior to derivatization.     

Laser-induced fluorescence and UV detection of derivatized aldehydes in air samples using capillary electrophoresis

In this work, two capillary zone electrophoresis methodologies using UV absorption detection (214 nm) and laser-induced fluorescence detection (He/Cd laser, 325 nm excitation, 520 nm emission) of selected aldehydes (formaldehyde, acetaldehyde, propionaldehyde and acrolein) derivatized with dansylhydrazine (DNSH, 5-dimethylaminonaphthalene-1-sulfohydrazide) were proposed and validated. The aldehydes react with DNSH to form negatively charged molecules in methanolic medium. In both methodologies, nine DNSH-derivatives, including isomers of acetaldehyde, propionaldehyde and acrolein and two impurities were baseline separated in 20 mmol l(-1) phosphate buffer at pH 7.02, in less than 9 min. The limits of detection for the UV and LIF methodologies ranged from 1.1-9.5 microg l(-1) and 0.29-5.3 microg l(-1), respectively. The applicability of both methodologies to contemplate real samples was confirmed in the analysis of aldehyde-DNSH derivatives in indoor and outdoor air samples.     

Separation and direct UV detection of lanthanides complexed with cupferron by capillary electrophoresis

Separation and detection of lanthanides by capillary zone electrophoresis in the presence of cupferron (N-nitroso-N-phenylhydroxylamine) as UV absorbing complexing agent were investigated. The resolution of partially complexed positively charged cupferron complexes is improved by using a buffer ligand competing with cupferron for metal ions. When hydroxyisobutyric acid (HIBA) is used as buffer and competing ligand, it provides complete separation of all 14 lanthanides with good peak shapes. An on-column separation of 14 lanthanides was achieved in only 7 min using 0.1 mmol/l cupferron, 15 mmol/1 HIBA at pH 4.9. The separation efficiencies for the optimum separation condition are between 77,000 and 208,000 theoretical plates. Determination of lanthanide complexes was performed by direct UV detection at 210 nm. Detection limits (signal-to-noise ratio=3) are ca. 0.24-0.47 microg/ml for lanthanides. Under optimum conditions, the complete separation of thorium and uranium from mixed lanthanides was achieved.     

Isotachophoretic focusing and mass spectrometry detection as tools for improving the determination of aromatic sulfonates in capillary electrophoresis

We explored isotachophoresis-capillary zone electrophoresis (ITP-CZE) with diode array detection on a single capillary to find out how to increase the injection volume and decrease the detection limits of aromatic sulfonates in CZE. The ITP was performed by applying a negative voltage in conjunction with hydrodynamic backpressure programming, and the terminating buffer was removed before the CZE separation, which resulted in highly sensitive determinations. The ITP increased the signal response of conventional hydrodynamic injection by a factor of 100, whereas the separation efficiency was unaffected. The limits of detection of the method were between 3 and 5 nugL(-1). The method was successfully used to determine these compounds in water samples. Experimental conditions for capillary electrophoresis-mass spectrometry were optimized and applied to determine aromatic sulfonates in water samples. These techniques enables the 2-naphthalenesulfonate to be determined in water samples.     

Analysis of polar hydrophilic aromatic sulfonates in waste water treatment plants by CE/MS and LC/MS

The present work describes the development and optimization of a capillary (zone) electrophoresis/mass spectrometric (CE/MS) analysis method for polar hydrophilic aromatic sulfonates (ASs). The compounds were detected by negative ion electrospray ionization (NIESI) and selected ion monitoring (SIM). In comparison with CE/UV, for CE/MS a lower-concentration volatile ammonium acetate buffer (5 mM) without organic modifier and a higher separation voltage were better suited for separation. Sensitivity of CE/MS was slightly better than for CF/UV, with the limit of detection (LOD) ranging between 0.1 and 0.4 mg l(-1). For verification of the CE/MS results, ASs were also analysed by ion-pair liquid chromatography/diode array UV detection coupled in series with electrospray mass spectrometry (IPC/DAD/ESI-MS). Real water samples of different waste water treatment plants (WWTPs) in Catalonia (NE Spain) were extracted by solid-phase extraction (SPE) with LiChrolut EN and analysed with CE/MS and LC/MS. ASs were found in influent and effluent water samples of the WWTPs in the microg l(-1) concentration range. LC/MS offered a higher separation efficiency and sensitivity than CE/MS. Therefore with LC/MS more compounds could be identified in the WWTPs. The persistency of the ASs was distinct: some compounds were well degraded during the water treatment process, while others were quite persistent.     

Microporous membrane liquid-liquid extraction coupled on-line with normal-phase liquid chromatography for the determination of cationic surfactants in river and waste water

Membrane-based continuous liquid-liquid extraction combined on-line with normal-phase liquid chromatography is proposed for the determination of cationic surfactants in complex aqueous samples. The technique has the potential for complete automation. Selective enrichment of cationic surfactants from spiked river water and waste-water samples with simultaneous removal of matrix constituents, followed by a quantitative transfer of the extract onto a liquid chromatographic column and separation of the surfactant homologues yielding low detection limits, has been realised. The homologues of alkyldimethylbenzylammonium chloride (Dodigen 226) were chosen as model compounds in the method development. Dodigen homologues were ion-paired with heptanoic acid and extracted into chlorobutane by means of microporous membrane liquid-liquid extraction. It was thereby possible to attain an enrichment of over 250 times for one of the homologues, viz. the concentration in the organic liquid is 250 times higher than in the original sample. Detection limits for the three best-detected homologues of the mixture were in the range 0.7-5 microg/l in spiked river water samples. Ion-pair normal-phase liquid chromatography, again with heptanoic acid as counter-ion, gave the necessary separation of the surfactant homologues.     

Electrically driven microseparation methods for pesticides and metabolites: VI. Surfactant-mediated electrokinetic capillary chromatography of aniline pesticidic metabolites derivatized with 9-fluoroenylmethyl chloroformate and their detection by laser-induced fluorescence

In this report, we describe a surfactant-mediated electrokinetic capillary chromatography (SM-EKC) system for the separation of 9-fluoroenylmethyl chloroformate (FMOC)-derivatized anilines by capillary electrophoresis (CE). The SM-EKC system consisted of dioctyl sulfosuccinate (DOSS)/acetonitrile mixtures and was suited for the CE separation of the relatively hydrophobic FMOC-aniline analytes and other neutral compounds, e.g. alkylphenyl ketones. While the organic modifier acetonitrile (ACN) allowed the solubilization of the hydrophobic solutes and maintained the DOSS surfactant in its monomeric form by inhibiting micellization, the DOSS surfactant associated with the FMOC anilines to a varying degree thus leading to their differential migration and separation. Under these conditions, the FMOC-anilines were readily detected at the 10(-6) M level by UV at 214 nm and at the 10(-8) M level by laser-induced fluorescence (LIF) using a solid-state UV laser operating at 266 nm line as the excitation wavelength. The FMOC precolumn derivatization was also readily performed in lake water spiked with anilines at near the limit of detection (LOD) level. The lake water matrix showed no significant effects on the extent of derivatization at the LOD level as well as on the detection of the analytes due to the selectivity of the FMOC derivatization. The derivatization and detection of spiked lake water necessitated only the removal of microparticles by microfiltration prior to derivatization and detection.     

Separation of chlorins and carotenoids in capillary electrophoresis

The present study reports the investigation of capillary electrophoresis (CE) for the separation of the photosynthetic pigments (chlorophyll derivatives as well as carotenoids) together. Various CE methods, such as micellar electrokinetic chromatography, capillary electrokinetic chromatography, and nonaqueous capillary electrophoresis (NACE) are tested, with coated and uncoated capillary columns to evaluate optimal separation conditions using diode array detection. The effect of different type and composition of organic solvents and surfactants on the separation is discussed. Detection limits are found in the range of 1.14-2.45 ppm. According to the system suitability results, the most effective separation is observed using NACE with Aliquat 336 as cationic surfactant in coated capillary and mixture of MeOH-ACN-THF (5:4:1, v/v/v) as solvent. Quantitative evolution is investigated, and recovery percentage values are found to be 96.7-102%.