Structure of hydrated clusters of tetrahydroisoquinoline [THIQ-(H2O)(n=1,3)] investigated by jet spectroscopy

The hydrated clusters of tetrahydroisoquinoline have been investigated by laser-induced fluorescence (LIF), UV-UV hole burning, and IR-UV double-resonance spectroscopy in a seeded supersonic jet. Clusters of different sizes and isomeric structures have different 0-0 transitions (origins) in the LIF spectrum. UV-UV hole burning spectroscopy has been used to identify different cluster species and their vibrational modes. The structures of the clusters have been predicted by comparing the observed OH and NH frequencies in the IR-UV double-resonance spectra with the results calculated at different levels of sophistication. It is found that the water molecules form linear and six- and eight-membered cyclic H-bonded structures at the nitrogen center of 1:1, 1:2, and 1:3 clusters, respectively.     

Effect of ions on the polymorphism, effective charge, and stability of human telomeric DNA. Photon correlation spectroscopy and circular dichroism studies

The effect of different ions on the formation and behavior of quadruplex structures of the human telomere sequence d(TTAGGG)(4) has been studied by photon correlation spectroscopy (PCS) and circular dichroism (CD). The saturation and melting curves obtained in the presence of K(+), Na(+), Rb(+), Li(+), Cs(+), and Sr(2+) ions were recorded by CD spectroscopy and indicated the formation of monomeric quadruplexes. Analysis of the saturation curves obtained at 2 degrees C has shown that the presence of a single Sr(2+) ion per oligomer is sufficient for the formation of a monomeric quadruplex of the DNA sequence studied. In the presence of SrCl(2) at a concentration of 50 mM, the formation of tetrameric quadruplexes has been detected. The effect of Sr(2+) ions on the formation of quadruplex structures by the human telomere sequence d(TTAGGG)(4) is stronger and different from that of the other ions tested. The paper also presents results of a study of electrostatic interactions in solution. The translation diffusion coefficients D(T) of the structures present in solution have been determined by photon correlation spectroscopy and the effective charges on the structures have been calculated by combining the experimental data with the results based on the coupled mode theory. Analysis of the melting points monitored by the CD method has permitted a determination of Deltan, the number of ions released in the process of thermal denaturation. All the results are in good agreement with the predictions based on the theory of polyelectrolytes. The effect of ions on the formation and behavior of quadruplex structures of the human telomere sequence d(TTAGGG)(4) has been studied by photon correlation spectroscopy and circular dichroism.     

Microwave-assisted architectural control fabrication of 3D CdS structures

A facile microwave-assisted solvothermal method was developed for the controlled synthesis of novel 3D CdS structures. Dendrite-, star-, popcorn- and hollow sphere-like CdS structures could be obtained by changing the reaction conditions including the reaction temperature and the amounts of reagents and solvents. The products were examined by using X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Raman and photoluminescence spectroscopy. Results revealed that the final structures were related to the solvent properties such as surface tension and viscosity. The degree of supersaturation is also responsible for the morphology variation and it can be adjusted by the reaction temperature. The CdS products with different morphologies exhibited interesting shape-dependent optical properties and photocatalytic activities.     

Recent advances in protein NMR spectroscopy and their implications in protein therapeutics research

Nuclear magnetic resonance (NMR) spectroscopy and X-ray crystallography are the two main methods for protein three-dimensional structure determination at atomic resolution. According to the protein structures deposited in the Protein Data Bank, X-ray crystallography has become the dominant method for structure determination, particularly for large proteins and complexes. However, with the developments of isotope labeling, increase of magnetic field strength, common use of a cryogenic probe, and ingenious pulse sequence design, the applications of NMR spectroscopy have expanded in biological research, especially in characterizing protein dynamics, sparsely populated transient structures, weak protein interactions, and proteins in living cells at atomic resolution, which is difficult if not impossible by other biophysical methods. Although great advances have been made in protein NMR spectroscopy, its applications in protein therapeutics, which represents the fastest growing segment of the pharmaceutical industry, are still limited. Here we review the recent advances in the use of NMR spectroscopy in studies of large proteins or complexes, posttranslation modifications, weak interactions, and aggregation, and in-cell NMR spectroscopy. The potential applications of NMR spectroscopy in protein therapeutic assays are discussed.     

Total internal reflection Raman spectroscopy

Total internal reflection (TIR) Raman spectroscopy is an experimentally straightforward, surface-sensitive technique for obtaining chemically specific spectroscopic information from a region within approximately 100-200 nm of a surface. While TIR Raman spectroscopy has long been overshadowed by surface-enhanced Raman scattering, with modern instrumentation TIR Raman spectra can be acquired from sub-nm thick films in only a few seconds. In this review, we describe the physical basis of TIR Raman spectroscopy and illustrate the performance of the technique in the diverse fields of surfactant adsorption, liquid crystals, lubrication, polymer films and biological interfaces, including both macroscopic structures such as the surfaces of leaves, and microscopic structures such as lipid bilayers. Progress, and challenges, in using TIR Raman to obtain depth profiles with sub-diffraction resolution are described.     

线状和树枝状银纳米结构、形成机理及表面增强拉曼散射性质(英文)

以聚丙烯酰胺(PAM)为模板,在液相中通过不同浓度的抗坏血酸还原硝酸银能够得到缠结的线状和树枝状银纳米结构.该方法合成条件温和(常温常压)、产率高、成本低、操作简单,并且得到了特殊形貌的缠结收光在谱一对起线的状线和状树银枝纳状米银结纳构.米通结过构透的射形电貌子和显性微质镜进(T行E了M)表,扫征描.研电究子表显明微,镜PA(SMEM对)线、拉形曼产光物谱的和形紫成外起?可了见决吸定性作用.在反应初期,大量新生成的银核被PAM链吸附,小颗粒逐渐长大,进而相连,导致生成了缠结的线状银纳米结构.另外,抗坏血酸的浓度越高,越不利于线状结构的生成.利用对巯基苯胺(PATP)为探针分子研究了银纳米结构的表面增强拉曼散射(SERS)活性,结果表明线状银纳米结构具有较强的表面增强拉曼散射效果.     

Seedless synthesis of octahedral gold nanoparticles in condensed surfactant phase

We report a seedless synthetic method of gold octahedral nanoparticles in an aqueous phase. Eight facets with {111} crystalline structures of octahedral nanoparticles could be formed in an aqueous medium when the gold salt was reduced by ascorbic acid at room temperature in the presence of cetyltrimethylammonium bromide as a shape-inducing agent, and hydrogen peroxide as a reaction promoter. The growth kinetics and surface crystalline structures were characterized by UV-vis spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy.     

Tetrazolylpentazoles: nitrogen-rich compounds

Tetrazolylpentazole was identified as an intermediate in the reaction of tetrazolediazonium chloride with lithium azide by low-temperature (15)N NMR spectroscopy. The decomposition of (15)N-labeled tetrazolylpentazole to form (15)N-labeled tetrazoleazides and dinitrogen was followed by low-temperature (15)N NMR spectroscopy. The structures of the species involved in this decomposition were optimized at different levels of theory, and the structures of the transition states were identified. The activation barriers for the decomposition were calculated at different levels of theory.     

Synthesis and structural analysis of isomeric pyridinophanes and thiacyclophanes

A one-pot synthesis of structurally isomeric tetrathiacyclophanes through four-centre coupling reactions of suitable bromides and thiols is reported. The structures of the isomers were confirmed by spectroscopy and XRD analysis. Single crystal X-ray analysis reveals interestingly shaped molecular structures with large cavities.     

Synthesis and isolation of polytrityl cations by utilizing hexaphenylbenzene and tetraphenylmethane scaffolds

The successful isolation of stable (and soluble) hexa- and tetratrityl cations based on hexaphenylbenzene and tetraphenylmethane scaffold has been accomplished by using readily available starting materials. These robust polytrityl cations can be isolated in crystalline form and stored indefinitely at 0 degrees C. Their structures have been established by (1)H/(13)C NMR spectroscopy and by UV-vis spectroscopy. The structures of these polytrityl cations were further confirmed by quantitative transformations to the reduced (poly)triphenylmethyl derivatives by hydride transfer from triethylsilane, cycloheptatriene, or a borane-dimethyl sulfide complex.     

Studies on the photooxidation mechanism of polymers. IV. Effect of ultraviolet light (2537 Å) on solid PVC particles suspended in different liquids

The photolysis of virgin PVC powder suspended in water, methanol, n-hexane, aqueous NH₄OH (30 wt-%), and 0.1 wt-% iodine in methanol and also as dry powder was studied. The mechanism of photolysis of PVC powder has been investigated by using ESR spectroscopy, conductivity titration, gel-permeation chromatography (GPC), and absorption spectroscopy. Photolysis of PVC has been found to occur by a free-radical mechanism. ESR spectroscopy permits a partial identification of several different types of free radicals in PVC such as alkyl, polyenyl, and peroxy radicals. An interpretation is proposed of the mechanism of formation of conjugated polyene structures, and also a new explanation of the crosslinking mechanism, in which transfer of unpaired electrons to double bonds occurs, is suggested. It has also been found that conjugated double bonds can photosensitize free-radical formation as a result of increased ultraviolet absorption due to polyene structures.     

Creating polymer structures of tunable electric functionality by nanoscale discharge-assisted cross-linking and oxygenation

We report the creation of polymeric micro/nanostructures which exhibit distinct chemical and physical characteristics from the matrix poly(N-vinyl carbazole) (PVK). The structure formation is based on atomic force microscopy (AFM) facilitated cross-linking and oxygenation. The reaction of PVK with AFM lithographically induced nanoscale discharge produces raised structures in which bridge oxygen links neighboring carbazole groups. The cross-linking by bridge oxygen converts the initially insulating PVK matrix to chemically modified conducting patterns through the formation of extended pi-conjugations. A comprehensive AFM, PES (photoelectron spectroscopy), FTIR (Fourier transform infrared spectroscopy), and DFT (density functional theory) analysis is presented to address the chemophysical identity of the patterned structures. Our results demonstrate new capabilities of AFM nanolithography in generating heterogeneous functional structures in a polymer matrix.     

Effect of high-pressure high-temperature treatment on the structure of a hexagonal modification of fullerite C<Subscript>60</Subscript>

Powder X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, and molecular dynamics have been employed to investigate structural transformations in hexagonal and cubic modifications of fullerite C₆₀ after the action of high pressure (4 GPa) within the temperature range 20–1450°C. It has been found that fullerene molecules polymerize to afford polymer structures only in the case of face-centered cubic samples. Under the effect of high pressure and temperature, fullerite C₆₀ with a hexagonal close-packed structure is initially transformed into the cubic modification and, then, forms polymerized structures, which, during an increase in the treatment temperature, become less stable and ordered than the same polymerized structures obtained directly from cubic fullerite C₆₀. X-ray photoelectron spectroscopy measurements suggest deformation of the cages of fullerene molecules in the polymerized structures.     

Efficient fabrication of ZrO2-doped TiO2 hollow nanospheres with enhanced photocatalytic activity of rhodamine B degradation

ZrO(2)-doped TiO(2) hollow nanospheres with anatase phase are efficiently fabricated via functionalized negatively charged polystyrene (PS) spheres without any surfactant or polyelectrolyte. The resulting Ti(1-)(x)Zr(x)O(2) (hereafter denoted as TZ) hollow nanospheres are characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), Laser Raman spectroscopy (LRS), X-ray photoelectron spectroscopy (XPS), X-ray fluorescence spectroscopy (XRF), nitrogen sorption, and UV-vis diffuse reflectance spectroscopy (UV-vis). The Zr(4+) incorporation decreases the anatase crystallite size, increases the specific surface area, and changes the pore size distribution. Furthermore, it induces enrichment of electron charge density around Ti(4+) ions and blueshift of absorption edges. The TZ hollow nanospheres doped with moderate ZrO(2) (molar ratio, Ti:Zr=10:1) exhibit better photocatalytic activity than the other samples for the degradation of rhodamine B in aqueous solution, which is correlated with the effect of Zr(4+) doping on the physicochemical properties in terms of surface structures, phase structures, and the electronic structures.     

Carbon avoids hypercoordination in CB6(-), CB6(2-), and C2B5(-) planar carbon-boron clusters

The structures and bonding of CB6-, C2B5-, and CB62- are investigated by photoelectron spectroscopy and ab initio calculations. It is shown that the global minimum structures for these systems are distorted heptacyclic structures. The previously reported hexacyclic structures with a hypercoordinate central carbon atom are found to be significantly higher in energy and were not populated under current experimental conditions. The reasons why carbon avoids hypercoordination in these planar carbon-boron clusters are explained through detailed chemical-bonding analyses.     

Micro-Raman and Tip-Enhanced Raman Spectroscopy of Carbon Allotropes

Summary: Raman spectroscopic data are obtained on various carbon allotropes like diamond, amorphous carbon, graphite, graphene and single wall carbon nanotubes by micro-Raman spectroscopy, tip-enhanced Raman spectroscopy and tip-enhanced Raman spectroscopy imaging, and the potentials of these techniques for advanced analysis of carbon structures are discussed. Depending on the local organisation of carbon the characteristic Raman bands can be found at different wavenumber positions, and e.g. quality or dimensions of structures of the samples quantitatively can be calculated. In particular tip-enhanced Raman spectroscopy allows the investigation of individual single wall carbon nanotubes and graphene sheets and imaging of e.g. local defects with nanometer lateral resolution. Raman spectra of all carbon allotropes are presented and discussed.     

Structure Investigation of New Condensation Products of 1,2,3,3-Tetramethylindolenium with Metoxysubstituted Diformylphenols

New spiropyran salts in the row of 1,3,3-trimethylspiro-indoline-2,2'-[2Н]-chromene are prepared and their structures are investigated. Molecular structures of obtained compounds are confirmed by X-ray diffraction and NMR spectroscopy. An open merocyanine isomer is found to be the most stable structure for one of these compounds.     

The Preparation of Heptacyclo[6.6.0.0.2,60.3,130.4,11 0.5,90.10,14]Tetradecane Derivatives and the Analysis of Their NMR Spectra

The title compound is functionalized by a series of reactions to yield derivatives in the forms of hydroxides, ketones, ketals, lactones, etc. Their structures are analyzed by NMR spectroscopy.     

复合SERS基底的构建及性质

通过自组装方法以对巯基苯胺(PATP)为偶联分子, 在石英基片上构筑了多种形貌的银钠米粒子单层结构和三明治结构. 研究了组装膜在不同激发线下表面增强拉曼散射(SERS)的增强差异. 研究结果表明, 单层基底和三明治基底中偶联分子的SERS信号因银纳米粒子间的电磁场耦合而显著增强, 且在三明治结构中增强更加明显. 对复合SERS基底增强因子进行计算可知, 复合SERS基底的表面等离子体共振(SPR)峰与激发线的匹配程度越好, 其增强因子越大. 在三明治结构中更易发生PATP分子转变为对巯基偶氮苯(DMAB)分子的激光诱导催化偶联反应. 另外, 该激光诱导催化偶联反应与激发波长密切相关.