Applications of enzyme-catalysed reactions in trace analysis-III Determination of silver and thiourea by their combined inhibition of invertase

Thiourea has been found to enhance the inhibition of invertase by silver ions. The effect is applied to the determination of 1–5 × 10⁻⁷ M silver and of 10⁻⁷–10⁻⁸ M thiourea. A mechanism is suggested for the enhancement.     

Simultaneous determination of selenium and lead in whole blood samples by differential pulse polarography

The polarographic reduction of lead in the presence of selenite gives rise to an additional peak corresponding to the reduction of lead (Pb) on adsorbed selenium (Se) on mercury at −0.33 V. The selenium and lead content can be determined using this peak by the addition of a known amount of one of these ions first and then the second ion. The linear domain range of lead is 5.0×10⁻⁷–2.0×10⁻⁵ M and for selenium 5.0×10⁻⁷–1.0×10⁻⁵ M. Using this method 4.90×10⁻⁷ M Se(IV) and 1.47×10⁻⁶ M Pb(II) in a synthetic sample could be determined with a relative error of +2.0% and 1.8%, respectively (n=4). A recovery test after acid digestion for a synthetic sample was 97% for selenium and 96.5% for lead. The method was applied to 1 ml of digested blood, and 328±23 μg l⁻¹ Se(IV) and 850±62 μg l⁻¹ Pb(II) could be determined with a 90% (n=5) confidence interval.     

Time measurement-visual analysis of nickel(II) using autocatalytic reaction with sodium sulfite/hydrogen peroxide system and its application to the length detection-flow analysis

Trace amounts of nickel(II) can function as a trigger (=reaction initiator) in an autocatalytic reaction with the sodium sulfite/hydrogen peroxide system. Based on this finding, sub-μg L⁻¹ levels of nickel(II) were determined by a time measurement using the autocatalytic reaction. The detection range using the above method was 10⁻⁹–10⁻⁵ M, the detection limit (3σ) was 8.1 × 10⁻¹⁰ M (0.047 μg L⁻¹), and the relative standard deviation was 2.66% at nickel(II) concentration of 10⁻⁷ M (n = 7). This method was applied to length detection-flow injection analysis. The detection range for the flow injection analysis was 2 × 10⁻⁹–2 × 10⁻³ M. The detection limit (3σ) was 1.4 × 10⁻⁹ M (0.082 μg L⁻¹), and the relative standard deviation was 1.86 at initial nickel(II) concentration of 10⁻⁶ M (n = 7).     

Determination of pK(a)'s for thymol blue in aqueous medium: evidence of dimer formation

Formation constants for recrystallized thymol blue were determined in water, using the SQUAD and SUPERQUAD programs. The best model correlating spectrophotometric, potentiometric and conductimetric data was fitted with the dissociation of HL⁻=L²⁻+H⁺−log K=8.918±0.070 and H₃L₂⁻=2L²⁻+3H⁺−log K=29.806±0.133 with the SUPERQUAD program at variable low ionic strength (1.5×10⁻⁴–3.0×10⁻⁴ M); and HL=L²⁻+H⁺−log K=8.9±0.000, H₃L₂⁻ =2L²⁻+3H⁺−log K=30.730±0.032, H₄L₂=2L²⁻+4H⁺−log K=32.106±0.033 with SQUAD at 1.1 M ionic strength.     

Simultaneous potentiometric determination of ClO(3)(-)-ClO(2)(-) and ClO(3)(-)-HClO by flow injection analysis using Fe(III)-Fe(II) potential buffer

A rapid potentiometric flow injection technique for the simultaneous determination of oxychlorine species such as ClO₃⁻–ClO₂⁻ and ClO₃⁻–HClO has been developed, using both a redox electrode detector and a Fe(III)–Fe(II) potential buffer solution containing chloride. The analytical method is based on the detection of a large transient potential change of the redox electrode due to chlorine generated via the reaction of the oxychlorine species with chloride in the potential buffer solution. The sensitivities to HClO and ClO₂⁻ obtained by the transient potential change were enhanced 700–800-fold over that using an equilibrium potential. The detection limit of the present method for HClO and ClO₂⁻ is as low as 5×10⁻⁸ M with use of a 5×10⁻⁴ M Fe(III)–1×10⁻³ M Fe(II) buffer containing 0.3 M KCl and 0.5 M H₂SO₄. On the other hand, sensitivity to ClO₃⁻ was low when a potential buffer solution containing 0.5 M H₂SO₄ was used, but could be increased largely by increasing the acidity of the potential buffer. The detection limit for ClO₃⁻ was 2×10⁻⁶ M with the use of a 5×10⁻⁴ M Fe(III)–1×10⁻³ M Fe(II) buffer containing 0.3 M KCl and 9 M H₂SO₄. By utilizing the difference in reactivity of oxychlorine species with chloride in the potential buffer, a simultaneous determination method for a mixed solution of ClO₃⁻–ClO₂⁻ or ClO₃⁻–HClO was designed to detect, in a timely manner, a transient potential change with the use of two streams of potential buffers which contain different concentrations of sulfuric acid. Analytical concentration ranges of oxychlorine species were 2×10⁻⁵–2×10⁻⁴ M for ClO₃⁻, and 1×10⁻⁶–1×10⁻⁵ M for HClO and ClO₂⁻. The reproducibility of the present method was in the range 1.5–2.3%. The reaction mechanism for the transient potential change used in the present method is also discussed, based on the results of batchwise experiments. The simultaneous determination method was applied to the determination of oxychlorine species in a tap water sample, and was found to provide an analytical result for HClO, which was in good agreement with that obtained by the o-tolidine method and to provide a good recovery for ClO₃⁻ added to the sample.     

Photometric determination of micro amounts of thiosulphate by means of its cyanolysis with lanthanum(III) as catalyst

Lanthanum(III) has been found to catalyse the reaction of thiosulphate with cyanide. The effects of pH, reaction time and temperature, amount of cyanide and lanthanum, and order of addition of reagents have been investigated. Temperature has little effect in the range 10–30°, but at both 35° and 40° the rate is noticeably faster. Reaction is complete at room temperature in 1.5 hr at pH 9.3–9.6, and in 3 hr at pH 9.1–9.6. The method can be applied to the determination of 1.0 × 10⁻⁵−6.0 × 10⁻⁴M thiosulphate, with a relative standard deviation of 0.3% for 4 × 10⁻⁴M thiosulphate.     

PVC membrane based potentiometric sensors for uranium determination

Two novel uranyl PVC matrix membrane sensors responsive to uranyl ion are described. The first sensor incorporates tris(2-ethylhexyl)phosphate (TEHP) as both electroactive material and plasticizer and sodium tetraphenylborate (NaTPB) as an ion discriminator. The sensor displays a rapid and linear response for UO₂²⁺ ions over the concentration range 1×10⁻¹–2×10⁻⁵ mol l⁻¹ UO₂²⁺ with a cationic slope of 25.0±0.2 mV decade⁻¹. The working pH range is 2.8–3.6 and the life span is 4 weeks. The second sensor contains O-(1,2-dihydro-2-oxo-1-pyridyl)-N,N,N′,N′-bis(tetra-methylene)uronium hexafluorophosphate (TPTU) as a sensing material, sodium tetraphenylborate as an ion discriminator and dioctyl phenylphosphonate (DOPP) as a plasticizer. Linear and stable response for 1×10⁻¹–5×10⁻⁵ mol l⁻¹ UO₂²⁺ with near-Nernstian slope of 27.5±0.2 mV decade⁻¹ are obtained. The working pH range is 2.5–3.5 and the life span of the sensor is 6 weeks. Interference from many inorganic cations is negligible for both sensors. However, interference caused by some ions (e.g. Th⁴⁺, Cu²⁺, Fe³⁺) is eliminated by a prior ion exchange or solvent extraction step. Direct potentiometric determination of as little as 5 μg ml⁻¹ uranium in aqueous solutions shows an average recovery of 97.2±1.3%. Application for the determination of uranium at levels of 0.01–1 wt.% in naturally occurring and certified ores gives results with good correlation with data obtained by X-ray fluorescence.     

Analytical applications of ternary complexes-IV Titration of macro- and micro-amounts of cyanide

The use of a 1,10-phenanthroline/Bromopyrogallol Red indicator system is proposed for the visual and photometric titration of cyanide with silver nitrate in the range 10⁻¹–10⁻⁴M and 10⁻⁴–10⁻⁵M respectively. Sharp, well-defined end-points are observed and the titration succeeds at low concentrations where the Liebig-Dénigès method is inapplicable. The results obtained agree well with those of the conventional method. EDTA may be used as a mass-masking agent for most cations.     

The vibrational state distributions in both products of the reaction: O(P) + NO2 → O2 + NO

A laser pulse-and-probe method has been used to determine the nascent vibrational populations in NO(v=0–4) and O₂(v=6–11) formed in the thermal reaction: O(³P) + NO₂ → O₂(v) + NO(v). A frequency-tripled Nd: YAG laser is used to photolyse NO₂, diluted tenfold in Ar, and laser-induced fluorescence spectroscopy in the NO A ²Σ⁺-X ²Π and O₂ B ³Σ⁻_u -X ³Σ⁻_g electronic band system is used both to follow the kinetics of individual vibrational states and to determine the nascent vibrational distributions. The majority of the NO product is formed in v = 0 and the average vibrational yield is ≈ 4.6%. The O₂ populations fall monotonically from v = 6 to 11 in a distribution close to what is expected on prior grounds. Based on a surprisal analysis, the average vibrational energy yield in O₂ is ≈ 26%. The nature of the reaction dynamics is discussed.     

MRD CI study on the low-lying states of AlP

Large-scale MRD CI calculations assign to AlP the ground state X ³Σ⁻ (9σ²3π²) and a close-lying state 1 ³Π (9σ3π³) (T_e = 0.08 eV). Up to transition energies of 2.0 eV, other states are described by the configurations 9σ3π³ (1¹Π), 8σ²3π⁴ (1 ¹Σ⁺), 9σ²3π² (1 ¹Δ and 2 ¹Σ⁺) and 9σ3π²4π (1 ⁵Π). The 2 ³Π state, located at ≈ 2.30 eV, shows a shallow double minimum. Numerous perturbations are expected to induce predissociation upon 2 ³Π. Multiplets arising from the occupation 8σ²3π³4π are clustered in the 3.25–3.50 eV region. Quintet states with the configuration 8σ9σ3π³4π are bound, with T_e values (in eV) of 3.80 (1 ⁵Σ⁺), 4.44 (1 ⁵Δ) and 4.88 (3 ⁵Σ⁻), respectively. The 9σ → 4s Rydberg members ⁵Σ⁻ and ³Σ⁻ lie in the 4.58–4.72 eV energy region. The first ionization potential (ionization to X⁴Σ⁻ of AlP⁺, 9σ → ∞) is estimated to be 7.65 eV. Ionization to the 1 ²Σ⁻ and 1 ²Π states of AlP⁺ is suggested to occur between 8.0 and 8.8 eV. The dipole moments of X ³Σ⁻, 1 ¹Δ and 2 ¹Σ⁺ are close to 1.0 D, whereas the 1 ¹Σ⁺ state has μ = 3.49 D; 1 ³Π and 1 ¹Π have dipole moments from 2.45 to 2.91 D. All low-lying states show a polarity Al⁺P⁻. Finally, the electronic structure and transition energies of AlP are compared with those of the isoelectronic species BN, AIN, and SiP⁺.     

Voltammetric determination of glucose based on reduction of copper(II)–glucose complex at lanthanum hydroxide nanowire modified carbon paste electrodes

A novel voltammetric method for the determination of β-d-glucose (GO) is proposed based on the reduction of Cu(II) ion in Cu(II)(NH₃)₄²⁺–GO complex at lanthanum(III) hydroxide nanowires (LNWs) modified carbon paste electrode (LNWs/CPE). In 0.1 mol L⁻¹ NH₃·H₂O–NH₄Cl (pH 9.8) buffer containing 5.0 × 10⁻⁵ mol L⁻¹ Cu(II) ion, the sensitive reduction peak of Cu(II)(NH₃)₄²⁺–GO complex was observed at −0.17 V (versus, SCE), which was mainly ascribed to both the increase of efficient electrode surface and the selective coordination of La(III) in LNW to GO. The increment of peak current obtained by deducting the reduction peak current of the Cu(II) ion from that of the Cu(II)(NH₃)₄²⁺–GO complex was rectilinear with GO concentration in the range of 8.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹, with a detection limit of 3.5 × 10⁻⁷ mol L⁻¹. A 500-fold of sucrose and amylam, 100-fold of ascorbic acid, 120-fold of uric acid as well as gluconic acid did not interfere with 1.0 × 10⁻⁵ mol L⁻¹ GO determination.     

Determination of iron(III) with salicylic acid by the fluorescence quenching method

The spectrofluorimetric determination of Fe³⁺ using salicylic acid as an emission reagent has been investigated by measuring the decrease of fluorescence intensity of salicylic acid due to the complexation of Fe³⁺–salicylic acid. An emission peak of salicylic acid, which is decreased linearly by addition of Fe³⁺, occurs at 409 nm in aqueous solution with excitation at 299 nm. The determination of the ferric ion is in the range 1×10⁻⁶–10×10⁻⁶ M Fe³⁺ (0.0558–0.558 μg/ml) and the detection limit is 5×10⁻⁸ M. The quenching effect of Fe³⁺ on the fluorescence intensity of salicylic acid may be considered on the basis of complexation between salicylic acid and Fe³⁺. The effects of foreign ions were investigated.     

Effect of presence of 18-crown-6 on the response of 1-pyrrolidine dicarbodithioate-based lead selective electrode

The lipophilic ammonium salt of 1-pyrrolidine dicarbodithioic acid (PCDT)[I] was introduced as a selective ionophore for a sensitive Pb-ion selective electrode. Also, the effect of immobilization of 18-crown-6 (CW), into the above membrane, on the electrode performance was discussed. The slope of the PCDT-based [I] electrode was (26–30 mV decade⁻¹), while it was (29-30 mV decade⁻¹) for (PCDT+CW)-based [II] electrode according to the doping time. The linear concentration ranges were (1×10⁻⁶–1×10⁻¹ M) and (5×10⁻⁵–1×10⁻¹ M) for electrode types [I] and [II] after one-day doping. The working pH ranges were (5.0–10.0) and (7.0–10.0) for electrode types [I] and [II], respectively. Most of the common cations were tested for the evaluation of the electrode selectivity with correlation to the ionic radii of the tested cations. Among them only Na⁺, Ag⁺ and Fe³⁺ were the real interference. Application of using the electrode for the determination of lead in lubrication oil samples was performed with RSD (0.86–1.03%). The obtained results were compared to those of an atomic absorption spectrophotometric method.     

Polarographic catalytic nickel prewave induced by some cysteine-containing dipeptides

The catalytic nickel prewave produced by Cys-Gly, Cys-Tyr and Cys-Phe was studied in acetate buffer at pH 4–6.5. These peptides are more active than cysteine, especially the last two. The catalytic activity is depressed by decrease of pH owing to protonation of the catalyst. However, Cys-Phe and Cys-Tyr are still active at pH < 5, in contrast to Cys-Gly and Cys. This difference is accounted for by the interaction of the aromatic ring with the electrode surface at potentials more positive than the potential of zero-charge. This effect enhances the surface concentration of the catalyst in the case of Cys-Phe or Cys-Tyr. At pH < 5, a catalyst concentration 10⁻⁵M and large excess of nickel, the current is controlled by the rate of accumulation of catalyst in the adsorbed state. Under these conditions the reducible complex is a 1:1 Ni²⁺-catalyst chelate. The catalytic wave recorded at pH 4.8 allows the determination of Cys-Phe or Cys-Tyr (10⁻⁶−10⁻⁴M) in the presence of the constituent amino-acids.     

Simultaneous flow injection determination of calcium and fluoride in natural and borehole water with conventional ion-selective electrodes in series

An on-line automated system for the simultaneous flow injection determination of calcium and fluoride in natural and borehole water with conventional calcium-selective and fluoride-selective membrane electrodes as sensors in series is described. Samples (30 μl) are injected into a TISAB II (pH=5.50) carrier solution as an ionic strength adjustment buffer. The sample-buffer zone formed is first channeled to a fluoride-selective membrane electrode and then via the calcium-selective membrane electrode to the reference electrodes. The system is suitable for the simultaneous on-site monitoring of calcium (linear range 10⁻⁵–10⁻² mol l⁻¹ detection limit 1.94×10⁻⁶ mol l⁻¹ recovery 99.22%, RSD<0.5%) and fluoride (linear range 10⁻⁵–10⁻² mol l⁻¹ detection limit 4.83×10⁻⁶ mol l⁻¹ recovery 98.63%, RSD=0.3%) at a sampling rate of 60 samples h⁻¹.     

Electrochemical study and detection of perphenazine using a gold electrode modified with decanethiol SAM

A novel method for the determination of perphenazine has been developed. The method is based on the accumulation of perphenazine at a gold electrode modified with decanethiol (DEC) self-assembled monolayer (SAM) and its oxidation at about 0.6 V (vs. saturated calomel electrode (SCE)). Because some coexistent electroactives were blocked and perphenazine was selectively accumulated by the SAM, the electrode exhibited good selectivity and sensitivity. Various conditions were optimized for practical application. Under the selected conditions (i.e. 0.05 M pH 10 sodium borate buffer, accumulation time: 120 s, accumulation potential: −0.4 V, scan rate: 100 mV s⁻¹), the anodic stripping peak current was linear to perphenazine concentration in the ranges of 6×10⁻⁹–5×l0⁻⁷ and 5×10⁻⁷–5×10⁻⁶ M with correlation coefficients of 0.998 and 0.995, respectively. For a 1.0×10⁻⁶ M perphenazine solution, the relative standard deviation of peak height was 2.3% (n=8). This method was applied to the determination of perphenazine in some drugs and the recovery was 92–101%. In addition, it was found that in the presence of perphenazine, the SAM structure changed a little and more needle holes appeared. However, the SAM could recover the original form when perphenazine and its redox product were removed from the monolayer by repeatedly cycling the electrode in a blank solution for a minute. The modified electrode was characterized by alternating current impedance and electrochemical probe.     

Simultaneous derivative spectrophotometric determination of thorium and uranium in a micellar medium

Derivative photometric methods for trace analysis of Th(IV) and UO₂(II), and their simultaneous determination in mixtures using 5,8-dihydroxy-1,4-naphthoquinone in a micellar medium are reported. Molar absorptivity and Sandell's sensitivity of 1:2 Th(IV) and 1:1 UO₂(II) complexes at their λ_max, 614.5 nm and 637.0 nm are, 1.19 × 10⁴ 1/mol/cm and 1.12 × 10⁴ 1/mol/cm and 1.95 × 10⁻² μg/cm² and 2.13 × 10⁻² μg/cm² μg/cm², respectively. Calibration graph is linear over the range 9.28 × 10⁻²−18.56 μg/ml of Th(IV) and 9.52 × 10⁻²−19.04 μg/ml of UO₂(II). Though presence of Th(IV) and UO₂(II) causes interference in each others determination, 9.28 × 10⁻¹−9.28 μg/ml Th(IV) and 9.52 × 10⁻¹−9.52 μg/ml UO₂(II) when present together, can be simultaneously determined using derivative spectra.     

Electrocatalytic response of norepinephrine at a thiolactic acid self-assembled gold electrode

The thiolactic acid (TLA) self-assembled monolayer modified gold electrode (TLA/Au) is demonstrated to catalyze the electrochemical response of norepinephrine (NE) by cyclic voltammetry. A pair of well-defined redox waves were obtained and the calculated standard rate constant (k_s) is 5.11×10⁻³ cm s⁻¹ at the self-assembled electrode. The electrode reaction is a pseudo-reversible process. The peak current and the concentration of NE are a linear relationship in the range of 4.0×10⁻⁵–2.0×10⁻³ mol l⁻¹. The detection limit is 2.0×10⁻⁶ mol l⁻¹. By ac impedance spectroscopy the apparent electron transfer rate constant (k_app) of Fe(CN)³⁻/Fe(CN)⁴⁻ at the TLA/Au electrode was obtained as 2.5×10⁻⁵ cm s⁻¹.     

Role of axial ligation on potentiometric response of Co(III) tetraphenylporphyrin-doped polymeric membranes to nitrite ions

Two types of Co(III) tetraphenylporphyrins, Co(III)TPPX (I) and Co(III)(N)TPPX (II), where X = C1⁻ or NO⁻₂ and N = C₅H₅N or C₆H₅CH₂C₅H₄N, are used as ionophores to prepare nitrite responsive polymeric membrane electrodes. The influence of the initial axial ligand (X⁻ and N) on the operative ionophore mechanism of these metalloporphyrins within the solvent polymeric membranes is examined. Results from potentiometric and electrodialysis experiments suggest that in the presence of nitrite in the test sample and internal solution, both types of Co (III) porphyrins studied (I and II) act as neutral carriers and that the addition of lipophilic cationic sites (e.g., tridodecylmethylammonium ions (TDMA⁺)) to the organic membrane is essential to improve the selectivity and long term stability of sensors prepared with these species. Membranes formulated with (I) or (II) in the nitrite form along with TDMACl in plasticized PVC films exhibit the following selectivity sequence: SCN⁻ > NO⁻₂ ˜ C1O⁻₄ > Sal⁻ > NO⁻₃ > Br⁻ > C1⁻. Membrane electrodes with added lipophilic cationic sites are shown to exhibit rapid, fully reversible and Nernstian response towards nitrite ions in the concentration range of 10⁻¹–10⁻⁵ M, with good long term stability.     

The effect of temperature on the solubility of benzoic acid derivatives in water

Using a laser monitoring observation technique, solubilities of o-nitro-benzoic acid, p-hydro-benzoic acid, p-methyl-benzoic acid and m-methyl-benzoic acid in water have been measured in the temperature range 290.15–323.15 K. The experimental data are regressed with the Wilson equation and the λH equation. The experimental results show that solubilities of these compounds in the range of 10⁻⁴–10⁻⁵ mole fraction in water, increase significantly with temperature. Except for o-nitro-benzoic acid, the solubility data are described adequately with the Wilson equation. The λH equation gives good agreement with all experimental data. The results indicate that the molecular structure and interactions affect the solubilities significantly.