Electrochromic smart windows: energy efficiency and device aspects

This paper covers three aspects of electrochromic smart windows. Their energy efficiency is discussed, and it is argued that a control strategy considering whether a room is in use or not can lead to large savings of the energy needed for space cooling. With regard to durability, it is shown that chemical compatibility between the electrolyte and electrochromic films of tungsten oxide and nickel oxide can be achieved without loss of optical transparency. Finally, we consider device manufacturability and present data on precharging of electrochromic nickel oxide films by ozone treatment. Electronic Publication     

Model of electrochromic and related phenomena in tungsten oxide thin films

We have developed a model of electrochromic and related phenomena in tungsten oxide thin films based on the assumption that the constitution of such films is heterogeneous and built up of nanosized particles, pores and adsorbed substances (mainly water). It is discussed why a high-efficiency reversible blue colour is observed in amorphous tungsten oxide films (α-WO₃ films) as well as why such porous thin films with polycrystalline or amorphous constitution and with a variety of particle properties can be easily obtained by a physical vapour deposition process in a low-pressure atmosphere in the presence of water. A substrate temperature in the range 450–550 K corresponds to some plateau on the water desorption curves which divided physically adsorbed water from chemically adsorbed water. Two types of structural units based on tetrahedrally and octahedrally coordinated tungsten ions have the main role in the formation of the film constitution. The tetrahedral structural units have a glass-forming function, but the octahedral ones have a modification function. From the electrochemistry point of view, the internal multiphase interfaces in such films are distributed multiphase electrodes. The adsorbed water together with defects of the oxide particles provide reagents for reversible coloration reactions in the film. The colour centres can be induced thermally (oxygen nonstoichiometry) or electrically (injected ions) or by radiation (photoinjected hydrogen). The electrochromism and related phenomenon of α-WO₃ films can be directly related to ion insertion/extraction processes controlled by external forces. Electronic Publication     

The role of thermal analysis in optimization of the electrochromic effect of nickel oxide thin films, prepared by the sol–gel method: Part II

Thin films and the corresponding xerogels were prepared from nickel acetate precursor using the sol–gel dip-coating technique. The differences in thermal stability of the two forms of samples were studied by dynamic and isothermal thermogravimetry. For thin films, the onset decomposition temperature of acetate groups was 230 °C and for the xerogel 250 °C. During thermal decomposition, the formation of nanosized nickel oxide took place. Carbonate ions, which were formed during thermal decompostion of acetate groups, remained either free or bidentately coordinated to nickel. In situ monochromatic optical transmittance changes showed that an optical stability up to the 100th cycle was already achieved for films heated for 15 min at the isothermal temperature (thermal decompositon 25%). Comparison of the results obtained for nickel sulfate (Part I) and nickel acetate precursors shows that at least two parameters, the precursor used and the degree of thermal treatment, have considerable influence on the thermal stability of the thin film and also on its electrochromic response during the cycling process.