丝素蛋白修饰改性的聚羟基脂肪酸酯支架上人体平滑肌细胞的生长

聚三羟基丁酸脂和聚三羟基己酸脂的共聚物(PHBHH_x)是一种具有良好强度和韧性的生物可降解高分子材料, 可作为组织工程心脏瓣膜支架的选择材料之一. 但其生物相容性尚不甚理想. 为此, 本工作利用丝素蛋白修饰改性高分子多孔支架, 以提高支架的生物相容性. 并将人体平滑肌细胞接种在该复合支架上进行体外培养, 以证实改性效果. 其中, 用3-(4,5-二甲基噻唑-2)-2,5-二苯基四氮唑溴盐(MTT)方法测试细胞生长, 评估复合支架的细胞相容性. 并用扫描电子显微镜观察细胞在支架上的生长形态. 结果显示, 丝素蛋白修饰改性后的复合支架更有利于细胞的粘附与生长, 平滑肌细胞在支架上表现出良好的生长形态. 这表明, 丝素能够改善多孔支架的生物相容性, 使PHBHH_x/丝素蛋白复合物能更适宜作为组织工程心脏瓣膜的支架材料. 结果对于进一步研究细胞外间质在复合支架上的生长以及体外培养的组织重建有重要的参考意义.     

Bacterial cellulose-reinforced hydroxyapatite functionalized graphene oxide: a potential osteoinductive composite

Bacterial cellulose (BC) is a nanofibrous biocompatible scaffold used in bone tissue engineering. Graphene oxide/hydroxyapatite (GOHA) composite supports the adhesion of osteoblast cells with good viability. In the present study, GOHA was prepared by the wet chemical precipitation method, and BC obtained from Acetobacter aceti was added to the aqueous suspension of GOHA to prepare GOHABC. The scanning electron microscopic image of GOHABC showed uniform adsorption of GOHA on the surface of BC. The osteoinductive potential of the GOHABC scaffold was analyzed by alkaline phosphatase (ALP) activity assay using MG-63 cells, and its biocompatibility nature was studied by using both MG-63 and NIH-3T3 cells. The ALP activity and biocompatibility studies showed that GOHABC is a potential osteoinductive material in vitro and may be tried in the future for in vivo studies.     

Biodegradable elastomer for soft tissue engineering

In this work we present the synthesis of a biodegradable, elastomeric material with a wide range of mechanical properties. The synthesis of the material was done by condensation polymerization of malic acid and 1,12–dodecandiol. The synthesized materials have low Young’s modulus ranging from about 1 to 4 MPa and a high elongation at break of 25–737% depending on the crosslinking density of the system. The cell growth observed under microscope showed good proliferation at 3 days of culture indicating good biocompatibility and support of L929 cells growth. The fabrication of 3D scaffold from these materials using the super critical CO₂ foaming method was also attempted. This method of scaffold fabrication is appropriate for materials that are easily hydrolysable and it also has the advantage of being a solvent free process. These materials are generally soft, biocompatible and biodegradable making them suitable for tissue engineering of soft tissues that are elastic in nature like muscles and blood vessels.     

Preparation of nanostructure hydroxyapatite scaffold for tissue engineering applications

Hydroxyapatite due to its good biocompatibility and similar chemical composition to the mineral part of bone has found various applications in tissue engineering. Porous hydroxyapatite has high surface area, which leads to excellent osteoconductivity and resorbability, providing fast bone ingrowth. In this study, highly porous body of nanostructure hydroxyapatite was successfully fabricated via gelcasting method. The pure phase of hydroxyapatite was confirmed by X-ray diffraction. The result of scanning electron microscopy analysis showed that the prepared scaffold has highly interconnected spherical pores with a size in the range 100–400 μm. The crystallite size of the hydroxyapatite scaffold was measured in the range 30–42 nm. The mean values of true (total) and apparent (interconnected) porosity were calculated in the range 84–91 and 70–78%, respectively. The maximum values of compressive strength and elastic modulus of the prepared scaffold were found to be about 1.5 MPa and 167 MPa, respectively, which were achieved after sintering at 1,000 °C for 4 h. Transmission electron microscopy analysis showed that the particle sizes are smaller than 80 nm. In vitro test showed good bioactivity of the prepared scaffold. The mentioned properties could make the hydroxyapatite scaffold a good candidate for tissue engineering applications, especially applications that did not need to stand any loading.     

Fabrication of cellulose-based scaffold with microarchitecture using a leaching technique for biomedical applications

Providing a conclusive microenvironment for cell growth, proliferation and differentiation is a major developmental strategy in the tissue engineering and regenerative medicine. This is usually achieved in the laboratory by culturing cells in three-dimensional polymer-based scaffolding materials. Here, we describe the fabrication of a cellulose scaffold for tissue engineering purposes from cellulose fiber using a salt leaching method. The 1-n-allyl-3-methylimidazolium chloride (AmimCl) IL was used as a solvent for cellulose. The leaching methodology used in this study offers the unique advantage of providing effective control of scaffold porosity by simply varying cellulose concentration. Morphologic testing of the scaffolds produced revealed pore sizes of 200–500 μm. In addition, the scaffolds had high water adsorption rates and slow degradation rates. To further investigate the suitability of these scaffolds for tissue engineering applications, biocompatibility was checked using an MTT assay and confirmed by Live/Dead^® viability testing. In addition, scanning electron microscopy and DAPI studies and in vivo experiment demonstrated the ability of cells to attach to scaffold surfaces, and a biocompatibility of matrices with cells, respectively. The authors describe the environmentally friendly fabrication of a novel cellulose-based tissue engineering scaffold.     

Oxygen Plasma Technology-Assisted Preparation of Three-Dimensional Reduced Graphene Oxide/Polypyrrole/Strontium Composite Scaffold for Repair of Bone Defects Caused by Osteoporosis

Repairs of bone defects caused by osteoporosis have always relied on bone tissue engineering. However, the preparation of composite tissue engineering scaffolds with a three-dimensional (3D) macroporous structure poses huge challenges in achieving osteoconduction and osteoinduction for repairing bone defects caused by osteoporosis. In the current study, a three-dimensional macroporous (150–300 μm) reduced graphene oxide/polypyrrole composite scaffold modified by strontium (Sr) (3D rGO/PPY/Sr) was successfully prepared using the oxygen plasma technology-assisted method, which is simple, safe, and inexpensive. The findings of the MTT assay and AO/EB fluorescence double staining showed that 3D rGO/PPY/Sr has a good biocompatibility and effectively promoted MC3T3-E1 cell proliferation. Furthermore, the ALP assay and alizarin red staining showed that 3D rGO/PPY/Sr increased the expression levels of ALP activity and the formation of calcified nodules. The desirable biocompatibility, osteoconduction, and osteoinduction abilities, assure that the 3D macroporous rGO/PPY/Sr composite scaffold offers promising potential for use in the repair of bone defects caused by osteoporosis in bone tissue engineering.     

Flexible Conductive Decellularized Fish Skin Matrix as a Functional Scaffold for Myocardial Infarction Repair

Engineering cardiac patches are proven to be effective in myocardial infarction (MI) repair, but it is still a tricky problem in tissue engineering to construct a scaffold with good biocompatibility, suitable mechanical properties, and solid structure. Herein, decellularized fish skin matrix is utilized with good biocompatibility to prepare a flexible conductive cardiac patch through polymerization of polydopamine (PDA) and polypyrrole (PPy). Compared with single modification, the double modification strategy facilitated the efficiency of pyrrole polymerization, so that the patch conductivity is improved. According to the results of experiments in vivo and in vitro, the scaffold can promote the maturation and functionalization of cardiomyocytes (CMs). It can also reduce the inflammatory response, increase local microcirculation, and reconstruct the conductive microenvironment in infarcted myocardia, thus improving the cardiac function of MI rats. In addition, the excellent flexibility of the scaffold, which enables it to be implanted in vivo through “folding-delivering-re-stretehing” pathway, provides the possibility of microoperation under endoscope, which avoids the secondary damage to myocardium by traditional thoracotomy for implantation surgery.     

Fabrication and Properties of Porous Collagen/Hyaluronic Composite Scaffolds Containing Nano-Bioactive Glass for Tissue Engineering

In this work, nano-structured scaffolds were designed for tissue engineering using collagen, hyaluronic acid (HA) and nano-bioactive glass (NBAG) as their main components. The scaffold was prepared via freeze-drying method and the properties including morphology, porosity, compressive strength, swelling ratio and cytotoxicity in-vitro, were also evaluated. The composite scaffolds showed well interconnected macropores with the pore size of ranging from 100 to 500 μm. The porosity percent and swelling ability were decreased with the introduction of NBAG into the collagen/HA hydrogel; however, the compressive strength was enhanced. The cytotoxicity in-vitro study shows that the collagen-HA/NBAG scaffolds have good biocompatibility with improving effect on fibroblastic cells growth. It could be concluded that this scaffold fulfills the main requirements to be considered as a bone substitute.     

Silk Fibroin Combined with Electrospinning as a Promising Strategy for Tissue Regeneration

The development of tissue engineering scaffolds is of great significance for the repair and regeneration of damaged tissues and organs. Silk fibroin (SF) is a natural protein polymer with good biocompatibility, biodegradability, excellent physical and mechanical properties and processability, making it an ideal universal tissue engineering scaffold material. Nanofibers prepared by electrospinning have attracted extensive attention in the field of tissue engineering due to their excellent mechanical properties, high specific surface area, and similar morphology as to extracellular matrix (ECM). The combination of silk fibroin and electrospinning is a promising strategy for the preparation of tissue engineering scaffolds. In this review, the research progress of electrospun silk fibroin nanofibers in the regeneration of skin, vascular, bone, neural, tendons, cardiac, periodontal, ocular and other tissues is discussed in detail.     

Preparation of enzymatically cross-linked sulfated chitosan hydrogel and its potential application in thick tissue engineering

For the requirement of preliminary vascularization, the scaffolds for thick tissue engineering should possess not only good cell affinity, but also anticoagulant ability. In this paper, an enzymatically crosslinked hydrogel scaffold based on sulfated chitosan (SCTS) was prepared. Firstly, sulfated chitosan-hydroxyphenylpionic acid (SCTS-HPA) conjugate was synthesized, and its structure was identified by FITR and ¹H NMR. And then an enzymatically crosslinked hydrogel was prepared in the presence of horseradish peroxidase (HRP) and hydrogen peroxide (H₂O₂). The gelation time, mechanical property, morphology and cytotoxicity to human umbilical vein endothelial cells (HUVECs) of the hydrogel was evaluated in vitro, the tissue compatibility of SCTS scaffold was studied in vivo. The results showed that the gelation time, mechanical property, morphology of the dehydrated hydrogel could be controlled by the HRP and H₂O₂ concentration. The cytotoxicity test showed that the hydrogel extracts had no cytotoxicity to HUVECs. The in vivo assay indicated that SCTS-HPA scaffold showed good tissue compatibility, and no thrombus formation. All these results indicated that the SCTS-HPA scaffold could be used as thick tissue engineering scaffold.     

Silk Fibroin/Wool Keratin Composite Scaffold with Hierarchical Fibrous and Porous Structure

The present study describes a silk microfiber reinforced meniscus scaffold (SMRMS) with hierarchical fibrous and porous structure made from silk fibroin (SF) and wool keratin (WK) using electrospinning and freeze-drying technology. This study focuses on the morphology, secondary structure, mechanical properties, and water absorption properties of the scaffold. The cytotoxicity and biocompatibility of SMRMS are assessed in vivo and in vitro. The scaffold shows hierarchical fibrous and porous structure, hierarchical pore size distribution (ranges from 50 to 650 µm), robust mechanical properties (compression strength can reach at 2.8 MPa), and stable biodegradability. A positive growth condition revealed by in vitro cytotoxicity testing indicates that the scaffold is not hazardous to cells. In vivo assessments of biocompatibility reveal that only a mild inflammatory reaction is present in implanted rat tissue. Meniscal scaffold made of SF/WK composite shows a potential application prospect in the meniscal repair engineering field with its development.     

Novel 3D Neuron Regeneration Scaffolds Based on Synthetic Polypeptide Containing Neuron Cue

Neural tissue engineering has become a potential technology to restore the functionality of damaged neural tissue with the hope to cure the patients with neural disorder and to improve their quality of life. This paper reports the design and synthesis of polypeptides containing neuron stimulate, glutamic acid, for the fabrication of biomimetic 3D scaffold in neural tissue engineering application. The polypeptides are synthesized by efficient chemical reactions. Monomer γ‐benzyl glutamate‐N‐carboxyanhydride undergoes ring‐opening polymerization to form poly(γ‐benzyl‐l ‐glutamate), then hydrolyzes into poly(γ‐benzyl‐l ‐glutamate)‐r‐poly(glutamic acid) random copolymer. The glutamic acid amount is controlled by hydrolysis time. The obtained polymer molecular weight is in the range of 200 kDa for good quality of fibers. The fibrous 3D scaffolds of polypeptides are fabricated using electrospinning techniques. The scaffolds are biodegradable and biocompatible. The biocompatibility and length of neurite growth are improved with increasing amount of glutamic acid in scaffold. The 3D scaffold fabricated from aligned fibers can guide anisotropic growth of neurite along the fiber and into 3D domain. Furthermore, the length of neurite outgrowth is longer for scaffold made from aligned fibers as compared with that of isotropic fibers. This new polypeptide has potential for the application in the tissue engineering for neural regeneration.     

Porous poly(glycerol sebacate) (PGS) elastomer scaffolds for skin tissue engineering

Poly (glycerol sebacate) (PGS) elastomer scaffolds with different porosity for skin tissue engineering were fabricated via particulate leaching. The introduction of pores lowers the hydrophilicity but improves the water uptake capability of PGS. The gel content of PGS increases with the increase of salt mass ratio, but the degree of swelling goes the opposite way due to the existence of the porous structure. The degradation rate of PGS can be tailored and controlled by the porous structure, which is of great value for its applications in tissue engineering. The feasibility of these porous PGS scaffolds for skin tissue engineering was evaluated by seeding mouse dermal fibroblasts (MDFs) onto the scaffold. In vitro cell culture results indicate good attachment, proliferation and deep penetration of MDFs into porous PGS scaffolds, which confirms the excellent biocompatibility of these scaffolds.     

与胶原特异性结合的BMP2模拟肽/PLGA 3D打印复合支架的制备及成骨诱导活性

将胶原绑定结构域(CBD)多肽序列与骨形态发生蛋白2模拟肽(BMP2-MP)序列连接制备具有胶原绑定能力的CBD-BMP2-MP, 再将CBD-BMP2-MP与聚丙交酯-乙交酯/胶原(PLGA/COL)3D打印支架相结合, 以支架表面的胶原成分为媒介, 将CBD-BMP2-MP更有效地固定于骨修复材料上, 达到对其进行改性的目的. 利用扫描电子显微镜(SEM)、 电子万能试验机和接触角测量仪对复合支架表面形貌、 力学强度和亲水性等材料学性能进行评价. 用荧光成像法评测 CBD-BMP2-MP及BMP2-MP与支架材料的结合能力. 在各组支架材料表面接种MC3T3-E1细胞进行体外培养, 采用CCK-8、 鬼笔环肽荧光染色、 茜素红染色及qPCR综合评价细胞在材料表面的黏附、 增殖和成骨分化等细胞行为, 研究CBD-BMP2-MP修饰的3D多孔PLGA/COL复合支架的生物学性能. 研究结果表明, 利用3D打印技术制备的多孔支架具有形貌可控的孔隙结构, 为细胞生长创造更有利的细胞微环境, 支架表面胶原成分的加入提高了支架材料的亲水性, 同时对支架材料本身的力学性能无任何影响, 提高了复合支架本身的生物相容性. 与普通BMP2-MP相比, CBD-BMP2-MP具有更好的胶原绑定能力, 与复合支架的结合更稳定, 提高了PLGA/COL复合支架对BMP2-MP的负载能力. 支架表面负载CBD-BMP2-MP后具有极强的促细胞成骨分化能力. MC3T3-E1细胞表现出更高的钙沉积能力, 并且成骨分化相关基因Runx2, ALP, COL-I及OPN等水平也有了明显提升. 表明CBD-BMP2-MP多孔复合支架具有良好的生物相容性和成骨诱导活性, 在骨组织修复领域具有良好的应用前景.     

原位沉淀法制备CS/nHA多孔复合支架及其性能

通过原位沉淀法和冷冻相分离技术得到含有钙磷前驱体(CaP)的初始多孔支架, 利用多孔支架表面原位生成的壳聚糖(CS)膜减缓NaOH溶液中OH^-离子的渗透速率, 以达到纳米羟基磷灰石(nHA)缓慢形成的目的, 从而制得nHA 分布均匀的CS/nHA多孔复合支架. 利用扫描电镜(SEM)和万能试验机研究复合支架的结构和性能, 发现nHA为针状结构, 长度为80200 nm, 宽度为2050 nm. 随着nHA含量的增加, 复合支架的孔隙率下降, 由(93.8±3.3)%降至(87.7±3.8)%, 压缩强度则逐渐提高, 由(0.5±0.09) MPa增加至(1.5±0.06) MPa. 当复合支架中nHA质量分数为25%时, 未发现nHA团聚现象, nHA均匀地分布于CS基体中. 通过红外光谱(FTIR)、 X射线衍射(XRD)及X射线光电子能谱(XPS)等分析推断, nHA与CS之间可能存在配位和氢键作用. 细胞实验结果表明, CS/nHA多孔复合支架具有良好的生物相容性, 细胞在支架内部贴壁黏附生长. CS/nHA多孔复合支架有望在骨组织工程领域具有良好的应用前景.     

Studies on Surface Properties and Cell Adhesion Properties of BSA Modified DBM Scaffold

As a scaffold material for bone tissue engineering, demineralized bone matrix(DBM) has such a limited ability to load cells and growth factors that the surface of the DBM scaffold was modified with bovine serum albumin(BSA) with different concentrations to improve the protein stmcture and physicochemical properties of the scaffold surface so as to enhance the adhesion of the cells. And the appropriate BSA concentration was explored. Compared with DBM, the scaffold with BSA coating had a smaller pore size and a lower porosity, also, the degradation rate was accelerated and the hydrophilic property was improved. Cells adhesion was observed inside the DBM seaffold before and after it had been modified, and the BSA modified scaffold had a good cell compatibility. Wlien the concentration of BSA was 20 mg/mL, the adhesion ability of the cells to modified scaffold was significantly increased, and the cell proliferation was facilitated.     

Biodegradable highly porous interconnected poly(ε-caprolactone)/poly(L-lactide-co-ε-caprolactone) scaffolds by supercritical foaming for small-diameter vascular tissue engineering

Biodegradable ?4 mm tubular porous poly(ε-caprolactone)/poly(L-lactide-co-ε-caprolactone) (PCL/PLCL) scaffolds are fabricated successfully via one-step microcellular supercritical carbon dioxide foaming process. The effect of blending ratio on the rheology, pore structures, mechanical property, wettability, and biocompatibility of PCL/PLCL blends tubular scaffold are reported. Rheological results show that PCL matrix and PLCL dispersed phase has good compatibility. The melt strength of PCL can be enhanced obviously by adding PLCL. With an increase of PLCL content from 10 to 30 wt%, the pore size increases from 7.6 to 24.9 μm due to the homogeneous nucleation effect. The maximum open-cell content can reach 77% for PCL/PLCL foamed sample. Cyclical tensile and compliance tests show that few content of dispersed PLCL (10–20 wt%) improves the flexibility and recoverability. Cell viability results demonstrate that human umbilical vein endothelial cells (HUVECs) cultured on all PCL/PLCL porous scaffolds exhibit a typical spindle-like cell morphology. Moreover, HUVECs have a higher density and spreading areas on surface of 10% PLCL scaffold. The results gathered in this paper may open a new perspective for the fabrication of small-diameter vascular tissue engineering scaffold.     

3D porous acellular cartilage matrix scaffold with surface mediated sustainable release of TGF-β3 for cartilage engineering

Acellular tissue matrix scaffolds are much closer to tissue’s complex natural structure and biological characteristics, thus assess great advantages in cartilage engineering. We used rabbit costal cartilage to prepare acellular microfilaments and further 3D porous acellular cartilage scaffold via crosslinking. Poly(l-lysine)/hyaluronic acid (PLL/HA) multilayer film was then built up onto the surface of the resulting porous scaffold. Furthermore, TGF-β3 was loaded into the PLL/HA multilayer film coated scaffold to obtain a 3D porous acellular cartilage scaffold with sustained releasing of TGF-β3 up to 60 days. The success of this project will provide a new way for the treatment of articular cartilage defects. Meanwhile, the anchoring and on-site sustained releasing of growth factors mediated by polyelectrolyte multilayered film can also provide a new method for improving the biocompatibility and the biofunctionality for other implanted biomaterials.     

聚乳酸/肝素缓释微囊复合材料组织相容性研究

研究了三种不同包覆材料的肝素微胶囊／聚乳酸(PLA)复合材料的组织相容性。结果表明，随着胶囊中壳聚糖浓度的增大，肝素的释放速率变慢。皮肤刺激、皮内刺激、热原、全身急性毒性和细胞培养等试验表明，制备的复合材料在生物学评价试验中均呈阴性反应，材料无明显毒性，材料中不存在潜在致敏性物质，所含热原含量符合生物体的要求。由此表明，肝素缓释微胶囊／PLA复合材料符合三维多孔材料的要求，且具有优良的组织相容性。     

壳聚糖及其衍生物在生物医药中的研究进展

壳聚糖是一种用途很广的天然高分子化合物,具有无毒、生物相容性、吸附功能、生物可降解性及多种生物学活性等优异性能。本文综述了壳聚糖及其衍生物作为药物载体材料、组织工程材料、医用敷料和抗菌材料的应用,并且其在抗肿瘤方面也有一定的疗效。