Mesoporous metal-organic framework materials

Metal-organic frameworks (MOFs) have emerged as a new type of porous materials for diverse applications. Most open MOFs reported to date are microporous (pore sizes <2 nm), and only a small fraction of MOFs with ordered mesoscale domains (2-50 nm) is reported. This tutorial review covers recent advances in the field of mesoporous MOFs (mesoMOFs), including their design and synthesis, porosity activation and surface modification, and potential applications in storage and separation, catalysis, drug delivery and imaging. Their specificities are dependent on the pore shape, size, and chemical environments of the cages or channels. The relationship between the structures and functions is discussed. The future outlook for the field is discussed in the context of current challenges in applications of mesoporous materials.     

A mixed-ligand approach for building a N-rich porous metal-organic framework for drug release and anticancer activity against oral squamous cell carcinoma

Abstract

A new Zn(II) metal-organic framework (MOFs), [Zn(BTC)(HME)]·(DMAc)(H₂O) (1, H₃BTC =1,3,5-benzenetricarboxylic acid, HME?=?protonated melamine, DMAc?=?N,N-dimethylacetamide), has been synthesized under solvothermal conditions. In the structure of 1, the four-coordinate Zn(II) ions are connected by BTC^3? ligands into a 3-D framework with (3)-connected utg-type topology. This MOF shows permanent porosity after lattice solvent removal with a calculated pore size distribution around 0.72?nm. With abundant N-donor sites and suitable pore size, the desolvated 1 (1a) was used as a drug carrier for the loading of anticancer drug 5-fluorouracil (5-Fu) molecules. Moderate 5-Fu loading capacity and long drug release time were observed for 1a. The computational simulation results reveal that strong H-bond interactions between the 5-Fu molecules and the nitrogen sites allow slow release of the drug 1a. In addition, the in vitro cytotoxicity of 1 and 5-Fu loaded 1a were also evaluated using MTT assays against human oral squamous cell carcinoma (SCC-251 and HSC-4).     

Active-site-accessible, porphyrinic metal-organic framework materials

On account of their structural similarity to cofactors found in many metallo-enzymes, metalloporphyrins are obvious potential building blocks for catalytically active, metal-organic framework (MOF) materials. While numerous porphyrin-based MOFs have already been described, versions featuring highly accessible active sites and permanent microporosity are remarkably scarce. Indeed, of the more than 70 previously reported porphyrinic MOFs, only one has been shown to be both permanently microporous and contain internally accessible active sites for chemical catalysis. Attempts to generalize the design approach used in this single successful case have failed. Reported here, however, is the synthesis of an extended family of MOFs that directly incorporate a variety of metalloporphyrins (specifically Al(3+), Zn(2+), Pd(2+), Mn(3+), and Fe(3+) complexes). These robust porphyrinic materials (RPMs) feature large channels and readily accessible active sites. As an illustrative example, one of the manganese-containing RPMs is shown to be catalytically competent for the oxidation of alkenes and alkanes.     

New isoreticular metal-organic framework materials for high hydrogen storage capacity

We propose new isoreticular metal-organic framework (IRMOF) materials to increase the hydrogen storage capacity at room temperature. Based on the potential-energy surface of hydrogen molecules on IRMOF linkers and the interaction energy between hydrogen molecules, we estimate the saturation value of hydrogen sorption capacity at room temperature. We discuss design criteria and propose new IRMOF materials that have high gravimetric and volumetric hydrogen storage densities. These new IRMOF materials may have gravimetric storage density up to 6.5 wt % and volumetric storage density up to 40 kg H2/m3 at room temperature.     

Flexibility in metal-organic framework materials: Impact on sorption properties

Recent years have seen the development of a new class of porous coordination polymers known collectively as metal organic framework materials (MOFs). This review outlines recent progress in understanding how adsorption characteristics of these systems differ from rigid classical sorbents such as activated carbon and zeolites. Gas/vapor adsorption studies for characterization of the porous structures of MOF materials are reviewed and differences in adsorption characteristics based on detailed measurement of equilibrium and dynamical sorption behavior, compared with previous generations of sorbents, are highlighted. The role of framework flexibility and specific structural features, such as windows and pore cavities, within the MOF porous structures are discussed in relation to adsorption mechanisms.     

A straightforward modular approach to NLO-active beta-amino vinyl nitrothiophenes

Secondary amines add very efficiently to 2-ethynyl-5-nitrothiophene to give beta-amino vinyl nitrothiophenes, a novel class of push-pull chromophores. According to first HRS measurements these highly solvochromic compounds with relatively short dipole axes display remarkably high static first hyperpolarizabilities = 29-31 x 10(-)(30) esu.     

A designed metal-organic framework based on a metal-organic polyhedron

A C(3) symmetric ligand with three 1,3-benzenedicarboxylate units has been used to construct a metal-organic framework with a (3,24)-connected network topology, where the nanometre-sized metal-organic cuboctahedra (MOCs) have been incorporated solely into a cubic close packing (CCP) arrangement, which led to superoctahedral and supertetrahedral cavities.     

Nickel metal-organic framework nanoparticles as electrode materials for Li-ion batteries and supercapacitors

Journal of Solid State Electrochemistry - Nickel-based metal-organic framework ([Ni(4,4′-bpy)(tfbdc)(H2O)2], Ni-MOF) nanoparticles with the size of 45–250&nbsp;nm were synthesized...     

In situ growth of polyoxometalate-based metal-organic framework nanoflower arrays for efficient hydrogen evolution

The conversion of traditional polymolybdate-based metal-organic frameworks (POMOFs) crystals to well-aligned nanoarrays are highly attractive for electrocatalytic hydrogen evolution but remains significant challenge. Herein, we demonstrated that the POMOFs nanoarrays as self-supported electrode toward hydrogen evolution with high catalytic activity and stability. Single-crystal X-ray analysis reveal the {ε-PMo^V₈Mo^VI₄O₃₇Zn₄} (Zn-ε-Keggin) serve as secondary building blocks and directly connected to BPB organic ligands (BPB = 1,4-bis(pyrid-4-yl)benzene) to obtain novel [ε-PMo^V₈Mo^VI₄O₃₇(OH)₃Zn₄][BPB]₃ (named as ZnMo-POMOF). Particularly, ZnMo-POMOF nanoflower arrays grown in-situ on a Ni foam substrate exhibiting excellent electrocatalytic hydrogen evolution performance of 180 mV at a current density of 10 mA/cm² with the Tafel slope of 66 mV/dec, thus among one of the best POMOF-based electrocatalysts reported so far. DFT calculations reveal that the bridging oxygen active sites (O_a) significantly optimizes Gibbs free energy of H* adsorption for Zn-ε-Keggin polymolybdate units (?0.07 eV), thereby increasing the intrinsic activity of the ZnMo-POMOF.     

A chiral metal-organic framework for sequential asymmetric catalysis

A chiral metal-organic framework (MOF) of the lcy topology was constructed from the Mn-Salen derived dicarboxylic acid and the [Zn(4)(μ(4)-O)(O(2)CR)(6)] secondary building unit, and used in highly regio- and stereo-selective sequential alkene epoxidation/epoxide ring-opening reactions.     

A homochiral metal-organic framework membrane for enantioselective separation

For the first time, a homochiral metal-organic framework membrane was prepared for the enantioselective separation of important chiral compounds, especially chiral drug intermediates, which will allow for the potential development of a new, sustainable and highly efficient chiral separation technique.     

Facile synthesis of metal-organic framework films via in situ seeding of nanoparticles

A facile in situ nanoparticle seeding method is reported to prepare MIL-101(Cr) films on alumina supports. The in situ seeding of MIL-101(Cr) nanoparticles was promoted by use of dimethylacetamide (DMA). The generality of this approach is further demonstrated for Cu(3)(btc)(2) films by using a (poly)acrylate promoter.     

Binding energies of hydrogen molecules to isoreticular metal-organic framework materials

Recently, several novel isoreticular metal-organic framework (IRMOF) structures have been fabricated and tested for hydrogen storage applications. To improve our understanding of these materials, and to promote quantitative calculations and simulations, the binding energies of hydrogen molecules to the MOF have been studied. High-quality second-order Moller-Plesset (MP2) calculations using the resolution of the identity approximation and the quadruple zeta QZVPP basis set were used. These calculations use terminated molecular fragments from the MOF materials. For H2 on the zinc oxide corners, the MP2 binding energy using Zn4O(HCO2)6 molecule is 6.28 kJ/mol. For H2 on the linkers, the binding energy is calculated using lithium-terminated molecular fragments. The MP2 results with coupled-cluster singles and doubles and noniterative triples method corrections and charge-transfer corrections are 4.16 kJ/mol for IRMOF-1, 4.72 kJ/mol for IRMOF-3, 4.86 kJ/mol for IRMOF-6, 4.54 kJ/mol for IRMOF-8, 5.50 and 4.90 kJ/mol for IRMOF-12, 4.87 and 4.84 kJ/mol for IRMOF-14, 5.42 kJ/mol for IRMOF-18, and 4.97 and 4.66 kJ/mol for IRMOF-993. The larger linkers are all able to bind multiple hydrogen molecules per side. The linkers of IRMOF-12, IRMOF-993, and IRMOF-14 can bind two to three, three, and four hydrogen molecules per side, respectively. In general, the larger linkers have the largest binding energies, and, together with the enhanced surface area available for binding, will provide increased hydrogen storage. We also find that adding up NH2 or CH3 groups to each linker can provide up to a 33% increase in the binding energy.     

Effect of graphite features on the properties of metal-organic framework/graphite hybrid materials prepared using an in situ process

Metal-organic framework (MOF)/graphite hybrid materials were prepared using an in situ process. Graphites with various chemical and physical features were used, and HKUST-1 was selected as the MOF component. The samples (parent materials and hybrid materials) were characterized by X-ray diffraction, nitrogen sorption, scanning electron microscopy, Raman spectroscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. Then they were tested as ammonia adsorbents in dynamic conditions. The results indicate that the functionalization of graphite is important to build the hybrid materials with synergistic properties. The lack of functional groups on graphite results in the formation of a simple physical mixture. Besides the surface chemistry of the graphitic component, the physical parameters (porosity and size of flakes) also seem to influence the formation of the hybrid materials. It is observed that the graphite particles disturb the formation of HKUST-1 and induce a different crystal morphology (more defects and increased surface roughness) than the one observed when MOF is formed in the absence of a substrate. The latter behavior causes less ammonia to be adsorbed on the hybrid materials than is expected for the simple physical mixture of HKUST-1 and graphite. The MOF structure collapses (in HKUST-1 and the hybrid materials) upon ammonia adsorption and leads to the formation of new species.     

A luminescent mixed-lanthanide metal-organic framework thermometer

A luminescent mixed lanthanide metal-organic framework approach has been realized to explore luminescent thermometers. The targeted self-referencing luminescent thermometer Eu(0.0069)Tb(0.9931)-DMBDC (DMBDC = 2, 5-dimethoxy-1, 4-benzenedicarboxylate) based on two emissions of Tb(3+) at 545 nm and Eu(3+) at 613 nm is not only more robust, reliable, and instantaneous but also has higher sensitivity than the parent MOF Tb-DMBDC based on one emission at a wide range from 10 to 300 K.     

一个微孔钴基金属有机骨架的合成及其选择性气体吸附

利用硝酸钴与配体5,5''-di(1H-1,2,4-triazol-1-yl)-(1,1''-biphenyl)-2,2''-dicarboxylic acid (H₂DTBDA)进行溶剂热反应,制备了一个结构新颖的金属有机骨架{[Co(DTBDA)]₂·DMF·MeOH}_n (FJI-H37)。FJI-H37不仅具有适合气体分子吸附的0.69 nm的微孔,还具有良好的热稳定性及有机溶剂容忍性。气体吸附测试表明FJI-H37不仅能从C₂H₂/CO₂(体积比50:50)混合气中选择性吸附C₂H₂,还可以从CO₂/N₂(体积比15:85)和CO₂/CH₄(体积比50:50)混合气中选择性捕获CO₂;固定床突破实验进一步证实了其高效的气体分离能力。