Synthesis and characterization of calcium complexes containing eta 2-pyrazolato ligands

Treatment of calcium bromide with 3,5-di-tert-butylpyrazolatopotassium (2 equiv) in tetrahydrofuran afforded Ca(tBu2pz)2(THF)2 (69%). The reaction of this compound with pyridine (3 equiv), tetramethylethylenediamine (TMEDA, 1 equiv), N,N,N',N',N"-pentamethyldiethylenetriamine (PMDETA, 1 equiv), triglyme (1 equiv), and tetraglyme (1 equiv) yielded Ca(tBu2pz)2(py)3 (51%), Ca(tBu2pz)2(TMEDA) (74%), Ca(tBu2pz)2(PMDETA) (50%), Ca(tBu2pz)2(triglyme) (73%), and Ca(tBu2pz)2(tetraglyme) (57%), respectively. Treatment of the tetrahydrofuran adduct of Ca(Me2pz)2, generated in situ, with PMDETA (1 equiv), triglyme (1 equiv), and tetraglyme (1 equiv) afforded Ca(Me2pz)2(PMDETA) (65%), Ca(Me2pz)2(triglyme) (54%), and Ca(Me2pz)2(tetraglyme) (40%), respectively. The X-ray crystal structures of Ca(tBu2pz)2(py)3, Ca(tBu2pz)2(TMEDA), Ca(tBu2pz)2(PMDETA), Ca(tBu2pz)2(triglyme), and Ca(Me2pz)2(PMDETA) revealed six-, seven-, or eight-coordinate calcium centers with eta 2-pyrazolato ligands. Ca(tBu2pz)2(triglyme) sublimes at 160 degrees C (0.1 mmHg). The potential utility of these complexes as source compounds for chemical vapor deposition processes is discussed.     

T3P®‐Mediated One‐Pot Synthesis of Bis(α‐aminophosphonates)

Two series of bis(α‐aminophosphonates) were synthesized by one‐pot three‐component reactions using 4‐phenylenediamine, an aldehyde (2 equiv) and a phosphite (2 equiv), or terephtalaldehyde, an amine (2 equiv), and a phosphite (2 equiv) together with propylphosphonic anhydride (T3P®) in both series as a coupling reagent. The bis(α‐aminophosphonates) were obtained in moderate to excellent yields. The condensations take place under mild conditions and the isolation of the products is simple.     

Reactivity of UH3 with mild oxidants

Addition of 2 equiv of I2 to a stirring suspension of UH3 in Et2O results in vigorous gas evolution and the formation of UI4(OEt2)2 (1), which can be isolated in good yields as an air- and moisture-sensitive brick-red powder. Addition of 3 equiv of AgBr to UH3 in DME produces UBr3(DME)2 (2), while addition of 4 equiv of AgX to UH3 in DME-CH2Cl2 provides UX4(DME)2 (X = Br, 3; Cl, 4). Similarly, the reaction of 4 equiv of AgOTf with UH3 in neat DME generates U(OTf)4(DME)2 (5). Each of these reactions proceeds with the evolution of hydrogen. Complex can also be generated by reaction of 4 equiv of Me3SiI with UCl4 in Et2O. All complexes were fully characterized, including analysis by X-ray crystallography.     

Direct acetoxylation and etherification of anilides using phenyliodine bis(trifluoroacetate)

Treatment of various anilides with 1.5 equiv. of phenyliodine bis(trifluoroacetate) (PIFA) and 1.0 equiv. of BF(3)·OEt(2) in AcOH at room temperature afforded the corresponding para-acetoxylated products with high regioselectivity. In addition, this reaction could be expanded to the etherification of anilides. In the presence of 2.0 equiv. of PIFA and 2.0 equiv. of BF(3)·OEt(2), the reaction of anilides with alcohols provided the corresponding para-etherified products in good yields.     

Terphenyl cyclooctatetraenyl compounds of samarium

The syntheses and molecular structures of a number of terphenyl-based compounds of the lanthanide element samarium are reported. Reaction of 2 equiv of DppLi (Dpp = 2,6-diphenylphenyl) with 1 equiv of SmCl(3) in tetrahydrofuran at room temperature yields (Dpp)(2)SmCl(micro-Cl)Li(THF)(3) (1). The one-pot reaction of 1 equiv of K(2)COT (COT(2)(-) = cyclooctatetraenyl dianion) with 1 equiv SmCl(3) in tetrahydrofuran at room temperature followed by addition of 1 equiv of terphenyllithium salt DppLi, DmpLi (Dmp = 2,6-dimesitylphenyl), or DanipLi (Danip = 2,6-di(o-anisol)phenyl) produces DppSmCOT(micro-Cl)Li(THF)(3) (2), DmpSm(THF)COT (3), and DanipSm(THF)COT (4), respectively. In the case of the Danip-based compound 4 the order of addition of reagents can be reversed producing the same compound, however, in considerably lower yield. Compound 2 can also be prepared by reaction of 1 with 1 equiv of K(2)COT in tetrahydrofuran. The molecular structure of the bis(terphenyl) compound 1 exhibits a formally four-coordinate metal atom. The molecular structures of the terphenyl COT compounds 2-4 feature monomeric complexes which are obtained either as a lithium chloride adduct (2) or as tetrahydrofuran adducts (3, 4). In 4 the Danip ligand adopts the meso form.     

Palladium-catalyzed cross-coupling reactions of in situ generated allylindium reagents with aryl halides

[reaction: see text] In situ generated allylindium reagents from the reaction of 1 equiv of indium with 1.5 equiv of allyl halides could be effective cross-coupling partners in palladium-catalyzed cross-coupling reactions to aryl halides. The best results were obtained with 2% Pd(2)dba(3)CHCl(3) and 16% Ph(3)P in the presence of 3 equiv of LiCl in DMF at 100 degrees C.     

Single-molecule magnets: a Mn25 complex with a record S = 51/2 spin for a molecular species

The reaction of MnCl2.4H2O (3 equiv), pyridine-2,6-dimethanol (pdmH2) (10 equiv), and NaN3 (10 equiv) in MeOH/MeCN (1:2 v/v) with NMe4OH (1 equiv) gave [Mn25O18(OH)2(N3)12(pdm)6(pdmH)6](Cl)2.12MeCN (1.12MeCN) in approximately 30% yield. The cation of complex 1 comprises five Mnx layers of three types in an ABCBA arrangement. Fitting of variable-temperature and -field magnetization data establishes that 1 has an S = 51/2 ground state, the largest value for a molecular species. The complex also displays hysteresis loops below 0.6 K in magnetization vs applied field sweeps, establishing it as the largest spin single-molecule magnet to date.     

Synthesis, Reactivity and Crystal Structure of β—Diketiminate Ytterbium Chlorides

Reaction of anhydrous YbCl3 with 1 equiv, of LLi [L=p-ClPhNC(Me)CH(Me)N(C6H3-2,6-i-Pr2)] in THF at room temperature gave the β-diketiminate lanthanide dichloride LYbCl2(THF)2 (1) in good isolated yield. Similarly reaction of anhydrous YbCl3 with 1 equiv, of LLi, then with 1 equiv, of t-BuCpNa in THF yielded the expected mixed-ligand β-diketiminate ytterbium chloride (t-BuCp)YbL(μ-Cl)2Li(THF)2 (2). Both 1 and 2 were well characterized by elemental analysis, IR spectra, ^1H NMR spectra, and X-ray diffraction analysis.     

Regioselective oxidative coupling reactions of 3-substituted thiophenes with arylboronic acids

Under optimized conditions, 3-substituted thiophenes (EWG = COOEt, PO(OEt)(2)) undergo a facile and regioselective oxidative coupling reaction at carbon atom C4. The reactions were performed with various aryl boronic acids as nucleophiles in the presence of silver oxide (2.0 equiv), cesium trifluoroacetate (tfa) (1.0 equiv), benzoquinone (BQ) (0.5 equiv), and catalytic amounts of Pd(tfa)(2) (10 mol %) employing trifluoroacetic acid (TFA) as the solvent.     

Hydrothermal synthesis method of 5-(4'-methylbiphenyl-2-yl)-1H-tetrazole

A clean and safe synthesis method of 5-(4’-methylbiphenyl-2-yl)-1H-tetrazole was found:under hydrothermal conditions,1.2 equiv.of 4’-methylbiphenyl-2-carbonitrile react with 1 equiv.of sodium azide in a mixed solvent of propane-1,2-diol/H2O,with 1.5 equiv.of ammonium chloride and 0.2 equiv.of ammonium fluoride as catalyst.After simple post-processing,the yield can be improved to 95%,and the purity of the product is 99%without further recrystallization.     

Synthesis of substituted benzoxacycles via a domino ortho-alkylation/Heck coupling sequence

The synthesis of a variety of alkylidene benzoxacycles via a domino palladium-catalyzed ortho-alkylation/intramolecular Heck reaction is described. Under the optimized conditions [Pd(OAc)2 (10 mol %), P(2-Furyl)3 (20 mol %), norbornene (4 equiv), Cs2CO3 (2 equiv), CH3CN, 80 degrees C], aryl iodides with oxygen-tethered Heck acceptors are coupled with alkyl bromides (5 equiv) to generate a variety of six- and seven-membered-ring benzoxacyclic products.     

Hydrozirconation of stannylacetylenes. Synthesis and reactions of ketene Stannyl(Telluro) acetals

Stannylacetylenes 7a-e react with Cp(2)Zr(H)Cl in THF at room temperature to give the alpha-zirconated vinylstannane intermediates 8a-e, which subsequently react with butyltellurenyl bromide (2.0 equiv) to give exclusively ketene stannyl(telluro) acetals 6a-e of E configuration. Similar reactions were performed using phenylselenenyl bromide (2.0 equiv) as the electrophile, but a mixture of products was formed including the expected ketene stannyl(seleno) acetals 12. Otherwise, the use of 1.4 equiv of Cp(2)Zr(H)Cl and 1.0 equiv of PhSeBr results in the exclusive formation of 12, in good yields. Treatment of ketene stannyl(telluro) acetals with iodine or NBS followed by reductive dehalogenation results in the formation of 1-iodo-1-telluroalkenes 4a-e and 1-bromo-1-telluroalkenes 5a-e, respectively, with total retention of the configuration.     

Potassium hydroxide-mediated novel rearrangement of 2-alkyl-sulfonyl-2-arylsulfonyl-1-phenylethanones to 1-aryl-2-(arylsulfonylmethanesulfonyl)ethanones

Treatment of a solution of a mixture of 1-aryl-2-arylsulfonylethanones 9 and alkylsulfonyl chlorides (1.5-2.0 equiv) in THF at 0 degree C with potassium hydroxide (8 equiv) for 10 min gave a rearrangement product, i.e., 1-aryl-2-(arylsulfonylmethanesulfonyl)ethanones 8, in excellent yields. Regiospecific methyl- and ethylation at the methylene carbon sandwiched between two sulfonyl groups of 8 could be achieved by the reactions of 7i-j with LDA (1 equiv) in THF at room temperature, respectively.     

Synthesis and crystal structure of unprecedented phosphine adducts of d(1)-aryl imido-vanadium(IV) complexes

The reaction of the imido precursor [V(NAr)Cl(2)](n)() (1) (Ar = 2,6-i-Pr(2)C(6)H(3)) with 3 equiv of PMe(2)Ph yields the monomeric complex [V(=NAr)Cl(2)(PMe(2)Ph)(2)] (2). Reacting 1 with 1.5 equiv of dmpe or 1 equiv of dppm affords the dimeric complexes [V(=NAr)Cl(2)(dmpe)](2)(mu-P,P'-dmpe) (3) and [V(=NAr)Cl(2)(dppm)](2) (4), respectively. Complexes 2-4 have been fully characterized by spectroscopic methods, magnetism studies, and X-ray crystallography.     

Synthesis of a digermane-containing tricylic nonadecadienedione incorporating an equivalent of ring-opened THF

The combination of 2 equiv of bis[bis(trimethylsilyl)amide]germylene (5) with 2 equiv of 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) in tetrahydrofuran (THF) results in the ring-opening of 1 equiv of THF to form 2,2,8,8-tetrakis(1,1,1,3,3,3-hexamethyl-disilazan-2-yl)-5,16-diphenyl-7,9,14-trioxa-1,3,5,16,18,19-hexaaza-2,8-digerma-tricyclo[13.2.1.13,6]nonadeca-6(19),15(18)-diene-4,17-dione (6). This fast and nearly quantitative reaction builds a 15-membered ring from five different molecules. The new ring, structurally assigned by X-ray crystallography, contains a flexible methylene chain that moves rapidly on the NMR time scale.     

Monomeric oxovanadium(IV) compounds of the general formula cis-[V(IV)(=O)(X)(L(NN))(2)](+/0) [X = OH(-), Cl(-), SO(4)(2)(-) and L(NN) = 2,2'-bipyridine (bipy) or 4,4'-disubstituted bipy

Reaction of [V(IV)OCl(2)(THF)(2)] in aqueous solution with 2 equiv of AgBF(4) or AgSbF(6) and then with 2 equiv of 2,2'-bipyridine (bipy), 4,4'-di-tert-butyl-2,2'-bipyridine (4,4'-dtbipy), or 4,4'-di-methyl-2,2'-bipyridine (4,4'-dmbipy) affords compounds of the general formula cis-[V(IV)O(OH)(L(NN))(2)]Y [where L(NN) = bipy, Y = BF(4)(-) (1), L(NN) = 4,4'-dtbipy, Y = BF(4)(-) (2.1.2H(2)O), L(NN) = 4,4'-dmbipy, Y = BF(4)(-) (3.2H(2)O), and L(NN) = 4,4'-dtbipy, Y = SbF(6)(-) (4)]. Sequential addition of 1 equiv of Ba(ClO(4))(2) and then of 2 equiv of bipy to an aqueous solution containing 1 equiv of V(IV)OSO(4).5H(2)O yields cis-[V(IV)O(OH)(bipy)(2)]ClO(4) (5). The monomeric compounds 1-5 contain the cis-[V(IV)O(OH)](+) structural unit. Reaction of 1 equiv of V(IV)OSO(4).5H(2)O in water and of 1 equiv of [V(IV)OCl(2)(THF)(2)] in ethanol with 2 equiv of bipy gives the compounds cis-[V(IV)O(OSO(3))(bipy)(2)].CH(3)OH.1.5H(2)O (6.CH(3)OH.1.5H(2)O) and cis-[V(IV)OCl(bipy)(2)]Cl (7), respectively, while reaction of 1 equiv of [V(IV)OCl(2)(THF)(2)] in CH(2)Cl(2) with 2 equiv of 4,4'-dtbipy gives the compound cis-[V(IV)OCl(4,4'-dtbipy)(2)]Cl.0.5CH(2)Cl(2) (8.0.5CH(2)Cl(2)). Compounds cis-[V(IV)O(BF(4))(4,4'-dtbipy)(2)]BF(4) (9), cis-[V(IV)O(BF(4))(4,4'-dmbipy)(2)]BF(4) (10), and cis-[V(IV)O(SbF(6))(4,4'-dtbipy)(2)]SbF(6) (11) were synthesized by sequential addition of 2 equiv of 4,4'-dtbipy or 4,4'-dmbipy and 2 equiv of AgBF(4) or AgSbF(6) to a dichloromethane solution containing 1 equiv of [V(IV)OCl(2)(THF)(2)]. The crystal structures of 2.1.2H(2)O, 6.CH(3)OH.1.5H(2)O, and 8.0.5CH(2)Cl(2) were demonstrated by X-ray diffraction analysis. Crystal data are as follows: Compound 2.1.2H(2)O crystallizes in the orthorhombic space group Pbca with (at 298 K) a = 21.62(1) A, b = 13.33(1) A, c = 27.25(2) A, V = 7851(2) A(3), Z = 8. Compound 6.CH(3)OH.1.5H(2)O crystallizes in the monoclinic space group P2(1)/a with (at 298 K) a = 12.581(4) A, b = 14.204(5) A, c = 14.613(6) A, beta = 114.88(1) degrees, V = 2369(1), Z = 4. Compound 8.0.5CH(2)Cl(2) crystallizes in the orthorhombic space group Pca2(1) with (at 298 K) a = 23.072(2) A, b = 24.176(2) A, c = 13.676(1) A, V = 7628(2) A(3), Z = 8 with two crystallographically independent molecules per asymmetric unit. In addition to the synthesis and crystallographic studies, we report the optical, infrared, magnetic, conductivity, and CW EPR properties of these oxovanadium(IV) compounds as well as theoretical studies on [V(IV)O(bipy)(2)](2+) and [V(IV)OX(bipy)(2)](+/0) species (X = OH(-), SO(4)(2)(-), Cl(-)).     

Synthesis of novel indole based cyclophanes and cylindrical cyclophanes by tandem alkylation methodology using NaH

Treatment of 1 equiv of 1,3-bis(bromomethyl)benzene and 2,6-bis(bromomethyl)pyridine with 1 equiv of indole in the presence of NaH in THF afforded the symmetrical cyclophanes 1 and 2. Using similar methodology, cylindrical cyclophanes 3 and 4 were obtained from 2 equiv of 1,3,5-trimethyl-2,4,6-tris(bromomethyl)benzene and 1,3,5-tris(bromomethyl)benzene with 3 equiv of indole.     

A simple one-step protocol for the olefination of vinylogous formamides

Vinylogous formamides--5-formyluracils and 4-formylpyrazoles-undergo smooth olefination in THF in the presence of indium metal (0.8 equiv) and BF₃·OEt₂ (1 equiv) and allyl bromide (1 equiv) to provide the respective diene-substituted heterocycles in a single step     

Synthesis of a base-stabilized silanone-coordinated complex by oxygenation of a (silyl)(silylene)tungsten complex

Base-stabilized silanone complex Cp*(OC)(2)W(SiMe(3)){O═SiMes(2)(DMAP)} (2) was synthesized by the reaction of (silyl)(silylene)tungsten complex Cp*(OC)(2)W(SiMe(3))(═SiMes(2)) (1) with 1 equiv of pyridine-N-oxide (PNO) in the presence of 4-(dimethylamino)pyridine (DMAP). Further oxygenation of 2 with 3 equiv of PNO at 80 °C resulted in the formation of a W-O-Si-O-Si framework to give disiloxanoxy complex Cp*(O)(2)W{OSiMes(2)(OSiMe(3))} (3). Complex 3 was also obtained by the direct reaction of complex 1 with 4 equiv of PNO at 80 °C.     

Indium-mediated atom-transfer and reductive radical cyclizations of iodoalkynes: synthesis and biological evaluation of HIV-protease inhibitors

Novel indium-mediated radical cyclization reactions of aliphatic iodoalkynes have been studied. Treatment of iodoalkynes with a catalytic amount of In (0.1 equiv) and I(2) (0.05 equiv) promotes atom-transfer 5-exo cyclization to give five-membered alkenyl iodides. In contrast, reaction with In (2 equiv) and I(2) (1 equiv) yields reductive 5-exo cyclization products via the same 5-exo cyclization. Both processes are most likely initiated by low-valent indium species. To demonstrate versatility of these reactions, optically active HIV protease inhibitors were synthesized by this reductive cyclization method. Among them, several products, which contain a hydroxyethylamine dipeptide isostere as a transition state-mimicking substructure, proved to possess potent activity (IC(50) = 5-39 nM) against a wide spectrum of HIV strains, including multidrug-resistant variants.