Novel terpolymers of poly(<Emphasis Type="Italic">p</Emphasis>-dioxanone-<Emphasis Type="Italic">co</Emphasis>-trimethylene carbonate-<Emphasis Type="Italic">co</Emphasis>-L-phenylalanine): Synthesis,characterization, thermal properties and copolymerization mechanism

In order to exploit the biological functions of materials, a series of new random terpolymers were synthesized by the ring-opening polymerization of p-dioxanone, trimethylene carbonate, and L-phenylalanine N-carboxyanhydride (L-Phe- NCA) in the presence of stannous octoate. The terpolymers were characterized by ¹H-NMR, ¹³C-NMR, FTIR, and gel permeation chromatography. The effects of the reactant ratio, catalyst dosage, reaction temperature and time on the copolymerization were investigated, and were found to regulate the composition of the terpolymer. Increases in the reaction temperature, polymerization time, L-Phe-NCA monomer amount, and catalyst content generated a product with a slightly decreased molecular weight. The crystallinity of the terpolymer was investigated by differential scanning calorimetry and polarized optical microscopy. A reasonable mechanism for the polymerization was proposed based on the obtained results.     

Synthesis of poly(carbon monoxide-co-ethylene-co-propylene) in the presence of supported palladium catalysts

Carbon monoxide terpolymers with ethylene and propylene are synthesized in the presence of a supported palladium complex in toluene for the first time. The reaction rate calculated from the terpolymer yield per gram of supported catalyst per hour depends on the reaction temperature and the propylene-to-ethylene molar ratio in the reaction solution. The amount of terpolymer per mole of palladium formed per hour decreases as the molecular mass of the terpolymer increases. Terpolymers with a molar fraction of propylene units up to 0.72 are synthesized when the initial propylene-to-ethylene molar ratio in the reaction solution is increased to 15.3. The number-average molecular mass of the terpolymer decreases from 30650 to 1420 when the temperature of synthesis is increased from 40 to 90°C.     

Thermal behavior of polyacrylonitrile polymers synthesized under different conditions and comonomer compositions

Polyacrylonitrile (PAN) polymers are used as precursors for carbon fiber production. This process requires an oxidative stabilization step, which can be studied by differential scanning calorimetry (DSC). In this sense, thermal behavior of PAN based terpolymers by different polymerization processes, compositions and itaconic acid concentrations in the reaction media were investigated. The obtained results showed that the addition of itaconic acid and methyl acrylate as comonomers resulted a lower heat flow during the process comparing to the PAN homopolymer. It suggested that these comonomers aid the oxidative stabilization stage for all studied process. The redox system polymerization at 40°C resulted in a lower heat flow. Itaconic acid decreases slightly initial and peak temperatures of the terpolymer and heat flow until concentration of 3y. The cyclization temperature decreases when MAis incorporated into the terpolymer compared to the MMA terpolymer and increases when MAA is the acidic monomer. Among terpolymers the AN/MA/AA polymer showed the best thermal behavior for carbon fiber producing.     

Course of the terpolymerization of ethylene,propylene, and dicyclopentadiene. I. Single initial addition of dicyclopentadiene

Detailed studies were made of the course of the terpolymerization of ethylene, propylene, and dicyclopentadiene to form unsaturated elastomers. All the dicyclopentadiene was added at the start of a polymerization, but the monoolefins were added continuously throughout the run. Under these conditions, unsaturation of the initial polymer is fairly high but decreases steadily as the reaction progresses. From analyses of the initial samples from each run, the catalyst of VCl₄ (with Al₂Et₃Cl₃ cocatalyst), with heptane as the polymerization solvent, was most efficient for introducing unsaturation into terpolymer. This system also produces gel in the terpolymer in the latter stages of reaction, however. Catalysts of VCl₄, VOCl₃, or V(C₅H₇O₂)₃, with Al₂Et₃Cl₃ cocatalyst, in benzene solvent gave terpolymers of quite similar unsaturations. With all systems, terpolymer yield increases very rapidly in the first few minutes of reaction, then very slowly for the remainder of the 30-min. reaction time, reflecting the rapid loss of activity of the vanadium catalysts. Molecular weight growth of the terpolymer prepared in heptane was extremely rapid, reaching a high value in a few minutes. When prepared in benzene, the terpolymers showed a steady increase in molecular weight throughout the reaction but reached only a moderate final value (as expressed by inherent viscosity).     

二氧化碳/1,2-环氧丁烷/ε-己内酯的三元共聚合和表征

以高聚物负载型双金属负离子配位化合物PBM为催化剂,通过二氧化碳(CO2),1,2-环氧丁烷(BO)与ε-己内酯(CL)的三元开环共聚合反应,得到三元共聚物,脂肪族聚碳酸酯(PBCL).对PBCL进行了FTIR1、H-NMR1、3C-NMR、DSC和WAXD等表征,并考察了反应单体比例及反应时间对共聚物性能的影响.结果表明,由于ε-己内酯开环共聚,引入了易水解的羧酸酯单元,PBCL的降解速度和玻璃化转变温度较二氧化碳-环氧丁烷的二元共聚物(PBC)得到了有效地提高.同时,PBCL相对于聚己内酯(PCL)玻璃化转变温度和降解速度明显改善,且PBCL为非晶结构.     

Course of the terpolymerization of ethylene,propylene, and dicyclopentadiene. II. Two-step addition of dicyclopentadiene

Terpolymerizations of ethylene, propylene, and dicyclopentadiene were carried out in which the dicyclopentadiene was added to the reaction system in two equal portions at the beginning and midpoint of each run, while the monoolefins were added continuously. In the resultant elastomers, unsaturation remains much more constant throughout the course of the polymerization than for terpolymers obtained when all dicyclopentadiene is added at the start of the reaction. Yield and molecular weight of the terpolymers produced by either technique are quite comparable, however. With VCl₄ catalyst (with Al₂Et₃Cl₃ cocatalyst) in heptane solvent, the two-step addition of the diene gave terpolymers with little gel, in contrast to the high gel in terpolymers formed with the single initial addition of the diene. This system also produced terpolymer with the highest final unsaturation and molecular weight. Catalysts of VCl₄, VOCl₃, or V(C₅H₇O₂)₃ in benzene gave terpolymers of moderate unsaturations and molecular weights.     

One‐pot synthesis of terpolymers with long l‐lactide rich sequence derived from propylene oxide,CO2, and l‐lactide catalyzed by zinc adipate

We report here an efficient one‐port synthesis of terpolymers from PO, CO₂, and l ‐lactide (LLA) with long LLA rich sequence using the cheapest zinc adipate as catalyst. The copolymerizations were carried out under various experimental conditions to find out the optimal conditions. The terpolymer yields increase significantly from 151 to 417 (g polymer per g zinc) by the introduction of LLA as a third monomer. The polycarbonate moiety selectivity increases by nearly 60% at relatively high polymerization temperature (80 °C). Moreover, the differences in reaction kinetic of polycarbonate and polyester moieties were observed by in situ infrared monitoring. As confirmed by XRD and DSC, the synthesized terpolymers are a kind of semicrystalline polymer in which the crystalline PLA segment function as strong noncovalent crosslinking domains. Consequently, it exhibits much better thermal properties as well as remarkable higher mechanical strength compared with amorphous polycarbonate PPC. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1734–1741     

Terpolymerization of acrylonitrile,styrene, and 2,3-dibromopropyl acrylate

The terpolymerization of acrylonitrile with styrene and 2,3-dibromopropyl acrylate in emulsion and dimethyl formamide solution was investigated. Polymerizations, when stopped at low conversions, yielded terpolymers that showed good agreement between experimental and theoretical copolymerization composition data, calculated from the Alfrey-Goldfinger equation. The relationship between monomer feed and terpolymer compositions is displayed on triangular coordinate graphs proposed by Slocombe. By using a computer program the lines of unique composition and binary azeotropic composition for both systems were established. In the case of emulsion polymerization the azeotropic ternary point was determined at a molar ratio for acrylonitrile/styrene/2,3-dibromopropyl acrylate of 0.27/0.61/0.12. The experimental results of emulsion terpolymerization fit the calculated curves satisfactorily over a wide range of monomer compositions up to high conversions. The influence of 2,3-dibromopropyl acrylate on the thermal and flammability characteristics of the terpolymers is described.     

Preparation and characterization of soluble terpolymers from m‐phenylenediamine,o‐anisidine,and 2,3‐xylidine

A series of terpolymers were synthesized by the chemical oxidative polymerization of m‐phenylenediamine (MPD), o‐anisidine (AS), and 2,3‐xylidine (XY) in hydrochloride aqueous medium. The yield, intrinsic viscosity, and solubility of the terpolymers were studied by changing the MPD/AS/XY molar ratio from 100/0/0 to 53/39/8 to 0/100/0. It was discovered that the MPD/AS/XY terpolymers exhibit a higher polymerization yield and better solubility than MPD/AS and MPD/XY bipolymers having the same MPD molar content. The as‐prepared MPD/AS/XY terpolymer bases were characterized by Fourier transform infrared, ultraviolet–visible, ¹H NMR, and high‐resolution solid‐state ¹³C NMR spectroscopies; wide‐angle X‐ray diffraction; and thermogravimetry. The results suggested that the oxidative polymerization from MPD, AS, and XY is exothermic, and the resulting terpolymers are more easily soluble in some organic solvents than MPD homopolymer. The copolymer obtained was a real terpolymer containing MPD, AS, and XY units, and the actual MPD/AS/XY molar ratio calculated by solid‐state ¹³C NMR spectra of the polymers is very close to the feed ratio, although the AS content calculated on the basis of the ¹H NMR spectrum of the soluble part of the polymer is higher than the feed AS content. The terpolymers and MPD homopolymer exhibit a higher polymerization yield and much higher intrinsic viscosity and are more amorphous than the AS homopolymer. At a fixed MPD content of 70 mol %, the terpolymers exhibit an increased thermostability and activation energy of the major degradation in nitrogen and air with an increasing AS content. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3989–4000, 2001     

孪尾疏水缔合三元共聚物的粘度行为:水解度的影响

以十二烷基硫酸钠(SDS)为表面活性剂,利用氧化还原体系、采用前加碱共聚-共水解的方法制备了孪尾疏水缔合水溶性三元共聚物聚(丙烯酰胺／丙烯酸钠／N,N-二己基丙烯酰胺)[P(AM/NaAA／DiC6AM)],研究了P(AM／NaAA／DiC6AM)稀溶液及亚浓溶液的性能。随理论水解度的增加,P(AM／NaAA／DiC6AM)水溶液的特性粘数[η]增加,Huggins常数KH减小。P(AM／NaAA／DiC6AM)水溶液的表现粘度随理论水解度的增加而增加,随温度、剪切速率的增加而降低,随剪切速率的增加开始时降低较快而后变化较小。P(AM／NaAA/DiC6AM)在盐溶液中随NaCl、CaCl2质量浓度的增加,出现盐增粘现象;理论水解度不同的P(AM／NaAA／DiC6AM)与SDS水溶液的表现粘度在wSDS=0．050～0．400g／L范围内随SDS质量浓度的变化差别不大。     

Synthesis,crystalline morphologies,self‐assembly,and properties of H‐shaped amphiphilic dually responsive terpolymers

Novel and well‐defined amphiphilic H‐shaped terpolymers poly(L‐lactide)‐block‐(poly(2‐(N,N‐dimethylamino)ethyl methacrylate) ‐block‐)poly(ε‐caprolactone)(‐block‐poly(2‐(N,N‐dimethylamino)ethyl methacrylate)) ‐b‐poly(L‐lactide) (PLLA‐b‐(PDMAEMA‐b‐)PCL(‐b‐PDMAEMA)‐b‐PLLA) were synthesized by the combination of ring‐opening polymerization, atom transfer radical polymerization, and click chemistry. The H‐shaped amphiphilic terpolymers can self‐assemble into spherical nano‐micelles in water. Because of the dually responsive (temperature and pH) properties of PDMAEMA segments, the hydrodynamic radius of the micelles of the H‐shaped terpolymer solution can be adjusted by altering the environmental temperature or pH values. The thermal properties investigation and the crystalline morphology analysis indicate that the branched structure of the H‐shaped terpolymers and the presence of amorphous PDMAEMA segments together led to the obvious decrease of PCL segments and the complete destruction of crystallinity of the PLLA segments in the H‐shaped terpolymers. In addition, the H‐shaped terpolymer film has better hydrophilicity than linear PCL or triblock polymer of PLLA‐b‐(N₃? )PCL(? N₃)‐b‐PLLA, due to the decrease or destruction of the crystallizability of the PCL or PLLA in the H‐shaped terpolymer and the presence of hydrophilic PDMAEMA segments. These unique H‐shaped amphiphilic terpolymers composed of biodegradable and biocompatible PCL and PLLA components and intelligent and biocompatible PDMAEMA component will have the potential applications in biomedical fields. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

pH‐Responsive ampholytic terpolymers of acrylamide,sodium 3‐acrylamido‐3‐methylbutanoate,and (3‐acrylamidopropyl)trimethylammonium chloride. I. Synthesis and characterization

Low-charge-density ampholytic terpolymers composed of acrylamide, sodium 3-acrylamido-3-methylbutanoate (NaAMB), and (3-acrylamidopropyl)trimethylammonium chloride were prepared via free-radical polymerization in 0.5 M NaCl to yield terpolymers with random charge distributions. NaOOCH was used as a chain-transfer agent during the polymerization to eliminate the effects of the monomer feed composition on the degree of polymerization (DP) and to suppress gel effects and broadening of the molecular weight distribution. The terpolymer compositions were obtained via ¹³C NMR spectroscopy, and the residual counterion content was determined via elemental analysis for Na⁺ and Cl⁻. The molecular weights (MWs) and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi-angle laser light scattering (SEC–MALLS); the terpolymer MWs ranged from 1.3–1.6 × 10⁶ g/mol, corresponding to DPs of 1.6–1.9 × 10⁴ repeat units, with all terpolymers exhibiting PDIs of less than 2.0. Intrinsic viscosities determined from SEC–MALLS data and the Flory–Fox relationship were compared to intrinsic viscosities determined via low-shear dilute-solution viscometry and were found to agree rather well. Data from the SEC–MALLS analysis were used to analyze the radius of gyration/molecular weight (R_g–M) relationships and the Mark–Houwink–Sakurada intrinsic viscosity/molecular weight ([η]–M) relationships for the terpolymers. The R_g–M and [η]–M relationships revealed that most of the terpolymers exhibited little or no excluded volume effects under size exclusion chromatography conditions. Potentiometric titration of terpolymer solutions in deionized water showed that the apparent pK_a value of the poly[acrylamide-co-sodium 3-acrylamido-3-methylbutanoate-co-(3-acrylamidopropyl)trimethylammonium chloride] terpolymers increased with increasing NaAMB content in the terpolymers and increasing ratios of anionic monomer to cationic monomer at a constant terpolymer charge density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3236–3251, 2004     

Synthesis of phosphonated copolymers with tailored architecture by reversible addition‐fragmentation chain transfer polymerization (RAFT)

The synthesis by reversible addition‐fragmentation chain transfer (RAFT) polymerization of three phosphonated terpolymers with tailored architecture has been studied. A phosphonated methacrylate (MAUPHOS) was copolymerized with vinylidene chloride (VC₂) and methyl acrylate (MA) to prepare a gradient terpolymer poly(VC₂‐co‐MA‐co‐MAUPHOS). Besides, hydroxyethyl acrylate (HEA) was used as a functional monomer in RAFT polymerization to prepare a statistical poly(VC₂‐co‐MA‐co‐HEA) terpolymer and a diblock poly(VC₂‐co‐MA)‐b‐poly(HEA) terpolymer. The HEA‐containing polymers were then modified with a phosphonated epoxide to introduce the phosphonated group. The control of the polymerization was proven by kinetic studies (evolution of molecular weight vs. conversion) and by a successful block copolymerization. The architecture of the terpolymers was determined by the reactivity ratios of the monomers: terpolymerization of VC₂, MA, and HEA leading to an ideal statistical terpolymer (no composition drift) whereas terpolymerization of VC₂, MA, and the phosphonated methacrylate led to a gradient terpolymer. These terpolymers were characterized by size exclusion chromatography, ³¹P NMR and differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 13–24, 2006     

Metallocene-catalyzed ethene/styrene co- and terpolymerization with olefinic termonomers

Ethene was co- and terpolymerized with 1-octene and styrene using the methylalumoxane (MAO) activated halfsandwich metallocene Me₂Si(Me₄Cp)(N-t.-butyl)TiCl₂(Cp = cyclopentadienyl, Me = methyl) as catalyst. At temperatures of 40 and 60°C styrene concentration was varied in order to investigate the influence of the comonomers. Despite decreasing the overall activity with respect to ethene/1-octene copolymerization, polymerization activity was found to exibit a relative maximum with increasing styrene concentration. An explanation is given taking two different comonomer effects into account. Low styrene concentration promoted higher 1-octene incorporation compared to ethene/1-octene copolymerization but significantly lowered the molecular weight of the terpolymers. With constant ethene and 1-octene concentration it was possible to produce ethene/1-octene/styrene terpolymers with styrene content varying from 0 to 25 mol % and 1-octene content varying from 8 to 21 mol %. All terpolymers were amorphous. With constant ethene content it was found possible to vary their glass transition temperature with 1-octene/styrene molar ratio incorporated in the terpolymer. ¹³C-NMR spectroscopic microstructure analysis showed that no styrene/1-octene sequences were found in the terpolymer backbone. Furthermore terpolymerizations were conducted successfully incorporating norbornene, 1,5-hexadiene and propene as monomers in terpolymertization with ethene and styrene. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2549–2560, 1997     

Synthesis,characterization and modeling of ABC triblock terpolymers: the effect of block sequence

Four equimolar terpolymers comprising ten units from each of the monomers methoxy hexa(ethylene glycol) methacrylate (HEGMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA) and methyl methacrylate (MMA) were prepared by group transfer polymerization (GTP), and characterized by gel permeation chromatography (GPC) and proton nuclear magnetic resonance (¹H NMR) spectroscopy to confirm size homogeneity and composition. These terpolymers were the three block sequence isomers, ABC, BAG and ACB, as well as the statistical isomer. Aqueous solutions of the terpolymers were characterized by dynamic light scattering and turbidimetry to determine the hydrodynamic sizes and cloud points. The results indicated micelle formation in the triblocks, and absence of micellization with the statistical terpolymer. In general, a strong dependence of the hydrodynamic size and cloud point on polymer architecture was observed. Monte Carlo simulations on non-aggregating isomeric terpolymers of similar structure also showed a strong dependence of the radius of gyration on polymer architecture.     

用钛系载体高效催化剂进行乙烯-丙烯-1-丁烯三元共聚合的研究 Ⅱ.共聚物的结构表征

通过各种表征手段对用TiCl_4,Ti(OBu)_4/MgCl_2/EB/φSiCl_2/AlEt_3催化剂合成的乙丙丁三元共聚物进行了剖析。发现在一定组成范围内,三元共聚物不含庚烷不溶物。DSC和WAXD分析检测不到结晶相。用~(13)C-NMR技术表征了在相同条件下合成的乙丙、乙丁及丙丁三组二元共聚物的序列分布。结果表明,乙丙和乙丁共聚物的序列结构可用一级Markov分布描述。丙丁共聚物则服从Bernoulli分布,用~(13)C-NMR方法计算了乙丙丁三元共聚物的化学组成,并初步考察了共聚物硫化胶的力学性能。     

以丙烯为主体的二元及三元共聚研究──丙烯与乙烯和丁烯－1的共聚合

研究了ＭｇＣｌ２载体高效催化剂用于丙烯为主体的与乙烯和丁烯－１的二元及三元共聚合反应：选择了最佳的共聚合条件；实验测定了共聚单体配比对共聚合活性、共聚物分子量和物理性能的影响；并用１３Ｃ—ＮＭＲ分析了共聚物组成、序列分布和支链结构等微观结构信息．     

Poly(N-vinyl-2-pyrrolidone-maleic anhydride-styrene) grafted terpolymer: Synthesis,characterization, and bactericidal property evaluation against E. coli and S. epidermidis

Poly(N-vinyl-2-pyrrolidone-maleic anhydride-styrene) terpolymer was prepared using AIBN initiator with acetone as solvent. The terpolymer was grafted with anti-bacterial agents para-aminobenzoic acid and 2,4-dichlorophenol to introduce bactericidal activity to the terpolymer. The terpolymer and the grafted polymers were characterized by FTIR, ¹H-NMR, and ¹³C-NMR spectroscopic methods. Thermal properties were determined by differential scanning calorimetric technique and thermogravimetric analysis. The glass transition temperature was found to be 111°C (terpolymer), 150°C (VMS-G-PABA) and 130°C (VMS-G-DCP). Terpolymer starts degradation at 288°C and grafted terpolymers at 104°C (VMS-G-PABA) and 129°C (VMS-G-DCP), respectively. The anti-bacterial activity of grafted terpolymers were evaluated by the shake flask method against gram positive and gram negative bacteria E. coli and S. epidermidis. The grafted terpolymers showed effective inhibition against both the bacteria, the minimum inhibition concentration was observed to be 75 µg/mL and 80 µg/mL for VMS-G-PABA and 50 µg/mL for VMS-G-DCP against E. coli and S. epidermidis, respectively. The new polymers showed 90% bacterial growth inhibition at 200 µg/mL.     

Palladium‐Promoted Carbon Monoxide/Ethylene/Styrene Terpolymerization Reaction: Throwing Light on the Different Reactivity of the Two Alkenes

The catalytic behavior of dicationic bis‐chelated Pd^II complexes, [Pd(N? N)₂][PF₆]₂, in the CO/ethylene/styrene terpolymerization reaction is studied in detail. The bidentate N‐donor ligands were chosen among 2,2′‐bipyridine ( 1 ), 1,10‐phenanthroline ( 3 ), their symmetrically substituted derivatives 2, 4 , and 5 , and 3‐alkyl‐substituted 1,10‐phenanthrolines 6 – 10 . The effect of several parameters (like temperature, CO/ethylene pressure, styrene content, reaction time) was investigated and related to the productivity of the catalytic system, to the relative content of the two olefins in the polymeric chains, and to the molecular mass of the synthesized polyketones. The presence of 1,4‐benzoquinone was necessary to reach productivities as high as 16 kg of terpolymer (TP) per gram of Pd. ¹³C‐NMR spectroscopy was useful to characterize the distribution of the two repetitive units along the polymer chain. Terpolymers with prevailingly isolated CO/styrene units in CO/ethylene blocks as well as terpolymers with CO/styrene and CO/ethylene blocks were obtained by varying the reaction conditions. Detailed MALDI‐TOF‐MS analysis was performed on the CO/ethylene/styrene terpolymers for the first time, and it allowed us to characterize the end groups of the terpolymer chains. The presence of different chain end groups was found to be related to the initial amount of the two alkenes, thus suggesting that different reactions are involved in the initiation and termination steps of the terpolymerization catalytic cycle.     

Terpolymerization of sulfur dioxide or maleic anhydride with unsaturated compounds under ultraviolet irradiation

The effect of ultraviolet irradiation on the terpolymerization was investigated. In the terpolymerizations of sulfur dioxide–butene-1–acrylonitrile, sulfur dioxide–butene-1–n-butyl acrylate, and maleic anhydride–allyl chloride–acrylonitrile systems, the composition of the terpolymers prepared under ultraviolet irradiation was different from those prepared in the dark. The unit content of sulfur dioxide and butene-1 or of maleic anhydride and allyl chloride in the terpolymer increased under ultraviolet irradiation. The nature of the growing end under ultraviolet irradiation is supposed to be the same as that of the dark polymerization on the basis of the same solvent effect on the terpolymer composition, the rate of polymerization and the molecular weight of polymer. The experimental results suggest that the complex between sulfur dioxide and butene-1 or maleic anhydride and allyl chloride might be excited by ultraviolet light and the excited complex may participate in the terpolymerization.