Crystalline,Highly Oriented MOF Thin Film: the Fabrication and Application

The thin film of metal‐organic frameworks (MOFs) is a rapidly developing research area which has tremendous potential applications in many fields. One of the major challenges in this area is to fabricate MOF thin film with good crystallinity, high orientation and well‐controlled thickness. In order to address this challenge, different appealing approaches have been studied intensively. Among various oriented MOF films, many efforts have also been devoted to developing novel properties and broad applications, such as in gas separator, thermoelectric, storage medium and photovoltaics. As a result, there has been a large demand for fundamental studies that can provide guidance and experimental data for further applications. In this account, we intend to present an overview of current synthetic methods for fabricating oriented crystalline MOF thin film and bring some updated applications. We give our perspective on the background, preparation and applications that led to the developments in this area and discuss the opportunities and challenges of using crystalline, highly oriented MOF thin film.     

磁控溅射制备择优取向氮化铝薄膜

AlN薄膜;磁控反应溅射;磁控溅射制备择优取向氮化铝薄膜;晶面取向;X射线衍射     

WHAT ARE THE DIFFERENCES OF POLYMER SURFACE RELAXATION FROM THE BULK?

The polymer surface relaxation in thin films has been a long debating issue.We report a new method on studying surface relaxation behaviors of polymer thin films on a solid substrate.This method involved utilizing a rubbed polyimide surface with a pretilting angle in a liquid crystalline cell.Due to the surface alignment,the liquid crystals were aligned along the rubbing direction.During heating the liquid crystalline cell,we continuously monitored the change of orientation of the liquid crystals.It is u...     

A highly thermally stable ferroelectric metal-organic framework and its thin film with substrate surface nature dependent morphology

A highly thermally stable, polar MOF built from the rigid ligand benzene-1,4-dicarboxylate and the main-group metal ion Sr(2+) shows ferroelectricity. With the ultimate goal of making components for use in devices, the fabrication of MOF thin films on Al(2)O(3), SrAl(2)O(4), and Al foil substrates using the in situ solvothermal method was explored. The mechanism of macroscopic polarization reversals in the ferroelectric MOF under an ac electric field and the dependence of the morphology of the MOF thin film on the nature of the substrate surface are discussed.     

MOF thin films: existing and future applications

The applications and potentials of thin film coatings of metal-organic frameworks (MOFs) supported on various substrates are discussed in this critical review. Because the demand for fabricating such porous coatings is rather obvious, in the past years several synthesis schemes have been developed for the preparation of thin porous MOF films. Interestingly, although this is an emerging field seeing a rapid development a number of different applications on MOF films were either already demonstrated or have been proposed. This review focuses on the fabrication of continuous, thin porous films, either supported on solid substrates or as free-standing membranes. The availability of such two-dimensional types of porous coatings opened the door for a number of new perspectives for functionalizing surfaces. Also for the porous materials themselves, the availability of a solid support to which the MOF-films are rigidly (in a mechanical sense) anchored provides access to applications not available for the typical MOF powders with particle sizes of a few μm. We will also address some of the potential and applications of thin films in different fields like luminescence, QCM-based sensors, optoelectronics, gas separation and catalysis. A separate chapter has been devoted to the delamination of MOF thin films and discusses the potential to use them as free-standing membranes or as nano-containers. The review also demonstrates the possibility of using MOF thin films as model systems for detailed studies on MOF-related phenomena, e.g. adsorption and diffusion of small molecules into MOFs as well as the formation mechanism of MOFs (101 references).     

Continuous crystalline carbonate apatite thin films. A biomimetic approach.

In contrast to extensive studies on hydroxyapatite thin films, very little has been reported on the thin films of carbonated apatite (dahllite). In this report, we describe the synthesis and characterization of a highly crystalline dahllite thin film assembled via a biomimetic pathway. A free-standing continuous precursor film of carbonated calcium phosphate in an amorphous phase was first prepared by a solution-inhibited templating method (template-inhibition) at an air-water interface. A stearic acid surface monolayer acted as the template, while a carbonate-phosphate solution composed a binary inhibition system. The precursor film formed at the air/water interface was heated at 900 degrees C and transformed into a dense crystalline film that retained the overall shape of the precursor. The crystalline phase was characterized by XRD and IR to be a single-phase carbonate apatite, with carbonate substitutions in both type A (OH-) and type B (PO4(3-)) lattice positions.     

H2S Sensors: Fumarate‐Based fcu‐MOF Thin Film Grown on a Capacitive Interdigitated Electrode

Herein we report the fabrication of an advanced sensor for the detection of hydrogen sulfide (H₂S) at room temperature, using thin films of rare‐earth metal (RE)‐based metal–organic framework (MOF) with underlying fcu topology. This unique MOF‐based sensor is made via the in situ growth of fumarate‐based fcu ‐MOF (fum‐ fcu ‐MOF) thin film on a capacitive interdigitated electrode. The sensor showed a remarkable detection sensitivity for H₂S at concentrations down to 100 ppb, with the lower detection limit around 5 ppb. The fum‐ fcu ‐MOF sensor exhibits a highly desirable detection selectivity towards H₂S vs. CH₄, NO₂, H₂, and C₇H₈ as well as an outstanding H₂S sensing stability as compared to other reported MOFs.     

多孔不锈钢基二氧化锰薄膜电极的制备及电容特性

用电化学方法制备了一种多孔不锈钢基二氧化锰薄膜电极。 在不锈钢基体上以聚乙二醇辛基苯基醚（Triton X-100）在水溶液中形成的液晶作掩膜,通过电化学腐蚀制备了多孔基体电极,用恒电位方法在基体上沉积二氧化锰薄膜。 用扫描电子显微镜对二氧化锰薄膜电极形貌进行了考察,循环伏安法和充放电曲线法测试了二氧化锰薄膜电极的电容。 结果表明,腐蚀后的不锈钢基体呈现多孔特征,孔分布无规律,孔径大小从几十纳米到几百纳米不等,沉积的二氧化锰呈颗粒状,直径为80~90 nm。 扫描速率为20 mV/s,沉积电量0.4 C/cm2时,循环伏安法测得的二氧化锰薄膜电极的质量比电容达400 F/g;沉积电量4~5 C/cm2时,面积比电容达到320 ×10-3 F/cm2,此时的质量比电容仍保持在200 F/g左右。 实验结果表明,多孔不锈钢基二氧化锰薄膜电极在超级电容器领域有潜在的应用前景。     

Highly oriented growth of titanate nanotubes (TNTs) in micro and confinement spaces on sol–gel derived amorphous TiO2 thin films under moderate hydrothermal condition

Synthesis of titanate nanotubes (TNTs) from sol–gel derived amorphous TiO₂ thin films under moderate hydrothermal condition has been reported. TNTs from film possess a tubular morphology that is the same crystalline phase as one synthesized from TiO₂ powder so far. TNTs obtained in this study are not entangled one another but oriented and isolated on the substrate. Growth of highly oriented TNTs is observed in micro grooves of amorphous TiO₂ thin film. Their orientation is also maintained with the growth of TNTs.     

Phosphonate monoesters as carboxylate-like linkers for metal organic frameworks

Bidentate phosphonate monoesters are analogues of popular dicarboxylate linkers in MOFs, but with an alkoxy tether close to the coordinating site. Herein, we report 3-D MOF materials based upon phosphonate monoester linkers. Cu(1,4-benzenediphosphonate bis(monoalkyl ester), CuBDPR, with an ethyl tether is nonporous; however, the methyl tether generates an isomorphous framework that is porous and captures CO(2) with a high isosteric heat of adsorption of 45 kJ mol(-1). Computational modeling reveals that the CO(2) uptake is extremely sensitive both to the flexing of the structure and to the orientation of the alkyl tether.     

Vapor‐Phase Deposition and Modification of Metal–Organic Frameworks: State‐of‐the‐Art and Future Directions

Materials processing, and thin‐film deposition in particular, is decisive in the implementation of functional materials in industry and real‐world applications. Vapor processing of materials plays a central role in manufacturing, especially in electronics. Metal–organic frameworks (MOFs) are a class of nanoporous crystalline materials on the brink of breakthrough in many application areas. Vapor deposition of MOF thin films will facilitate their implementation in micro‐ and nanofabrication research and industries. In addition, vapor–solid modification can be used for postsynthetic tailoring of MOF properties. In this context, we review the recent progress in vapor processing of MOFs, summarize the underpinning chemistry and principles, and highlight promising directions for future research.     

MOF-on-MOF heteroepitaxy: perfectly oriented [Zn2(ndc)2(dabco)]n grown on [Cu2(ndc)2(dabco)]n thin films

We report the successful heteroepitaxial growth of perfectly oriented hybrid MOF thin films. By employing step-by-step liquid-phase epitaxy (LPE), [Zn(2)(ndc)(2)(dabco)](n) was grown on [Cu(2)(ndc)(2)(dabco)](n), thus demonstrating that the MOF-on-MOF deposition scheme developed for powdered microcrystalline MOF materials can also be applied in connection with LPE for MOF thin films or multilayers. The deposition was monitored by surface plasmon resonance (SPR) spectroscopy, the resulting MOF heterostructures were characterized using IR spectroscopy and different types of X-ray diffraction (XRD)-based techniques. The results suggest that the LPE method is a promising way to fabricate and grow MOF heterostructures, and also demonstrates the potential of [Cu(2)(ndc)(2)(dabco)](n) MOF thin films as substrates for the LPE-based growth of different MOFs on top.     

The biocompatibility of metal-organic framework coatings: an investigation on the stability of SURMOFs with regard to water and selected cell culture media

Highly porous thin films based on a [Cu(bdc)(2)](n) (bdc = benzene-1,4-dicarboxylic acid) metal-organic framework, MOF, grown using liquid-phase epitaxy (LPE) show remarkable stability in pure water as well as in artificial seawater. This opens the possibility to use these highly porous coatings for environmental and life science applications. Here we characterize in detail the stability of these SURMOF 2 thin films under aqueous and cell culture conditions. We find that the material degrades only very slowly in water and artificial seawater (ASW) whereas in typical cell culture media (PBS and DMEM) a rapid dissolution is observed. The release of Cu(2+) ions resulting from the dissolution of the SURMOF 2 in the liquids exhibits no adverse effect on the adhesion of fibroblasts, prototype eukaryotic cells, to the substrate and their subsequent proliferation, thus demonstrating the biocompatibility of SURMOF 2 surface coatings. Thus, the results are an important step toward application of these porous materials as a slow release matrix, for example, for pharmaceuticals and growth factors.     

Photoconductivity in Metal–Organic Framework (MOF) Thin Films

Photoconductivity is a characteristic property of semi‐conductors. Herein, we present a photo‐conducting crystalline metal–organic framework (MOF) thin film with an on–off photocurrent ratio of two orders of magnitude. These oriented, surface‐mounted MOF thin films (SURMOFs), contain porphyrin in the framework backbone and C₆₀ guests, loaded in the pores using a layer‐by‐layer process. By comparison with results obtained for reference MOF structures and based on DFT calculations, we conclude that donor–acceptor interactions between the porphyrin of the host MOF and the C₆₀ guests give rise to a rapid charge separation. Subsequently, holes and electrons are transported through separate channels formed by porphyrin and by C₆₀, respectively. The ability to tune the properties and energy levels of the porphyrin and fullerene, along with the controlled organization of donor–acceptor pairs in this regular framework offers potential to increase the photoconduction on–off ratio.     

Thin and surface adhesive ferroelectric poly(vinylidene fluoride) films with β phase‐inducing amino modified porous silica nanofillers

We report an efficient route for ferroelectric polar β phase generation in poly(vinylidene fluoride) (PVDF) through incorporation of amine functionalized, porous silica (MCM‐41 and fumed silica) based nanofillers. These porous highly functionalized surfaces exhibit the efficient secondary interaction with polymer chain via hydrogen bonding. Structural analysis through FTIR, XRD, and TEM confirm high degree of ferroelectric polar β phase generation of PVDF through incorporation of amino modified porous silica nanofillers. Optimized loading (5 wt %) of amine functionalized, porous silica in PVDF matrix enhances relative intensity of β phase up to 75%. Disappearance of spherulite structure of PVDF with amino modified porous silica nanofillers, as confirmed through POM, TEM, SEM and AFM studies also supports the above conclusion. The P‐E hysteresis loop at sweep voltage of ±50 V of a thin PVDF‐amino modified porous nanofiller film shows excellent ferroelectric property with nearly saturated high remnant polarization 2.8 µC.cm^?2 owing to its large proportion of β PVDF, whereas, a nonpolar pure PVDF thin film shows unsaturated hysteresis loop with 0.6 µC.cm^?2 remnant polarization. PVDF films with the nanofillers exhibit strong adhesive strength over different metallic substrates making them have edge over PVDF in various thin film applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2401–2411     

Epitaxial growth of pentacene films on Cu110

The molecular structure of thin pentacene (C(22)H(14)) films grown on a Cu(110) surface has been studied by means of He atom scattering, low energy electron diffraction, thermal desorption spectroscopy, x-ray photoelectron spectroscopy, and x-ray absorption spectroscopy. Depending on the actual film thickness three different crystalline phases have been identified which reveal a characteristic reorientation of the molecular plane relative to the substrate surface. In the monolayer regime the molecules form a highly ordered commensurate (6.5x2) structure with a planar adsorption geometry. For thin multilayers (thickness <2 nm) a second phase is observed which is characterized by a lateral ((-0.65 5.69) ( 1.90 1.37)) structure and a tilting of the molecular plane of about 28 degrees around their long axis which remains parallel to the surface. Finally, when exceeding a thickness of about 2 nm subsequent growth proceeds with an upright molecular orientation and leads to the formation of crystalline films which are epitaxially oriented with respect to the substrate. The present study thus demonstrates that also on metal substrates highly ordered pentacene films with an upright orientation of the molecular planes can be grown. Photoelectron spectroscopy data indicate further that thick films do not grow in a layer-by-layer mode but reveal a significant degree of roughness.     

Stress-induced chemical detection using flexible metal-organic frameworks

In this work we demonstrate the concept of stress-induced chemical detection using metal-organic frameworks (MOFs) by integrating a thin film of the MOF HKUST-1 with a microcantilever surface. The results show that the energy of molecular adsorption, which causes slight distortions in the MOF crystal structure, can be converted to mechanical energy to create a highly responsive, reversible, and selective sensor. This sensor responds to water, methanol, and ethanol vapors, but yields no response to either N2 or O2. The magnitude of the signal, which is measured by a built-in piezoresistor, is correlated with the concentration and can be fitted to a Langmuir isotherm. Furthermore, we show that the hydration state of the MOF layer can be used to impart selectivity to CO2. Finally, we report the first use of surface-enhanced Raman spectroscopy to characterize the structure of a MOF film. We conclude that the synthetic versatility of these nanoporous materials holds great promise for creating recognition chemistries to enable selective detection of a wide range of analytes.     

Nanoporous Films with Oriented Arrays of Molecular Motors for Photoswitching the Guest Adsorption and Diffusion

Molecular motors are fascinating nanomachines. However, constructing smart materials from such functional molecules presents a severe challenge in material science. Here, we present a bottom-up layer-by-layer assembly of oriented overcrowded-alkene molecular motors forming a crystalline metal–organic framework thin film. While all stator parts of the overcrowded-alkene motors are oriented perpendicular to the substrate, the rotors point into the pores, which are large enough allowing for the light-induced molecular rotation. Taking advantage of the thin film's transparency, the motor rotation and its activation energy are determined by UV/Vis spectroscopy. As shown by gravimetric uptake experiments, molecular motors in crystalline porous materials are used, for the first time, to control the adsorption and diffusion properties of guest molecules in the pores, here, by switching with light between the (meta-)stable states. The work demonstrates the potential of designed materials with molecular motors and indicates a path for the future development of smart materials.     

Induced alignment of a solution-cast discotic hexabenzocoronene derivative for electronic devices investigated by surface X-ray diffraction

A surface X-ray diffraction study is presented showing that highly ordered and uniaxially aligned hexa(3,7-dimethyl-octanyl)hexa-peri-hexabenzocoronene (HBC-C8,2) films can be fabricated by crystallization from solution onto friction-transferred poly(tetrafluoroethylene) (PTFE) layers. Three crystalline HBC-C8,2 majority phases result. In all three phases, the HBC-C8,2 molecules self-organize into columns which are uniaxially aligned along the direction defined by the PTFE macromolecules of the substrate. The three phases are quite similar, the major difference being their orientation with respect to the substrate. A quasi-2D epitaxial growth mechanism with a grapho-epitaxial component for one of the three phases explains the formation of the three rotational HBC-C8,2 variants. A method to obtain a thin film with only one phase is proposed. The results show that standard THETAV;-2THETAV; X-ray diffraction and transmission electron diffraction can be very misleading tools to estimate the crystalline quality in a thin film of complex structure.     

Large Scale Homogeneous Growth Mechanics of Microcrystalline Silicon Films on Rough Surface

Large scale homogenous growth of microcrystalline silicon (μc-Si:H) on cheap substrates by inductively coupled plasma (ICP) of Ar diluted SiH₄ has been studied. From XRD and Raman spectrum, we find that substrates can greatly affect the crystalline orientation, and the μc-Si:H films are comprised of small particles. Thickness detection by surface profilom-etry shows that the thin μc-Si:H films are homogenous in large scale. Distributions of both ion density and electron temperature are found to be uniform in the vicinity of substrate by means of diagnosis of Langmuir probe. Based on these experimental results, it can be proposed that rough surfaces play important roles in the crystalline network formation and Ar can affect the reaction process and improve the characteristics of μc-Si:H films. Also, ICP reactor can deposit the thin film in large scale.