The kinetics and mechanism of aquation and base hydrolysis of the cis-[Co(cyclen)Cl2]+ cation (cyclen=1,4,7,10-tetraazacyclododecane)

The aquation of cis-[Co(cyclen)Cl2]+ (cyclen=1,4,7,10-tetraazacyclododecane) has been studied over a range of temperatures with 0.1 mol dm–3 HNO3 as solvent. At 25°C, kaq=4.5×10–3 s–1 with H=78 kJ mol–1 and S298=–21 J K–1 mol–1. Base hydrolysis of cis-[Co(cyclen)Cl2]+ is extremely rapid with kOH=2.1×107 dm3 mol–1 s–1 at 25°C and I=0.1 mol dm–3. This is the largest rate constant so far reported for the base hydrolysis of a cis-dichloro-complex of a saturated macrocycle. The activation parameters, H=53 kJ mol–1 and S298=73 J K–1 mol–1 are consistent with a mechanism in which deprotonation of the substrate is rate-determining. This conclusion is confirmed by the observation of general base catalysis by formate ion. The Brønsted value for the reaction is ca. 0.72 and SN1(CB) and E2 mechanisms are considered to account for the kinetic results. Base hydrolysis of cis-[Co(cyclen)(OH)Cl]+ has also been studied in the pH range 6.5 to 8.7. The value of kOH=3.8×102 dm3 mol–1 s–1 at 25°C and I=0.1 mol dm–3 with H=110 kJ mol–1 and S298=171 J K–1 mol–1 are consistent with an SN1(CB) mechanism.     

Platinum concentration in silicone breast implant material and capsular tissue by ICP-MS

Inductively coupled plasma-mass spectrometry (ICP-MS) was used to determine the concentration of platinum (Pt) in silicone breast implant gel (range, 0.26–48.90 g g^–1 Pt; n=15), elastomer (range, 3.05–28.78 g g^–1 Pt; n=7), double lumen (range, 5.79–125.27 g g^–1 Pt; n=7), foam (range, 5.79–8.36 g g^–1 Pt; n=2), and capsular tissue (range, 0.003–0.272 g g^–1 Pt; n=15). The results show that very high levels of Pt are present in the encasing elastomer, double lumen, and foam envelope materials. Silicone breast implants can be a source of significant Pt exposure for individuals with these implants.     

The [CoN4(OH)(OH2)]2+ (N4 = trpn,cyclen and tren) promoted hydrolysis of the phosphotriester 2,4–dinitrophenyl diethyl phosphate

The [CoL(OH2)2]3+ (L=trpn, cyclen andtren)promoted hydrolysis of the phosphotriester 2,4–dinitrophenyl diethyl phosphate to give diethyl phosphate and 2,4–dinitrophenolate has been studied in detail over the pH range 3–7.5. The pK values of the various complexes have been determined at 25°C and I=0.1moldm–3 by potentiometric titration. The pH-rate profiles for the reactions are consistent with the hydroxoaqua complex [CoL(OH)(OH2)]2+ being the active species in the hydrolysis. No evidence for saturation kinetics was obtained and values of kcat determined at pH 7 and 25°C (I=0.1moldm–3) are 4.24×10–3dm3mol–1 s–1 (tren)<3.05×10–2dm3mol–1 s–1 (cyclen)<7.5 × 10–1dm3mol–1s–1 (trpn). Studies involving the more reactive phosphonate ester 2,4–dinitrophenyl ethyl methylphosphonate suggest that the rate-determining step in the reaction is the decomposition of the ternary complex between the cobalt(III) complex and the phosphotriester. The rate enhancement using 0.01mol dm–3 Co(trpn)3+ is some 4.6×104 fold at pH7 and 25°C.     

Structure of tetraphenylarsonium tricyano- 2,2′,6′,2′′-terpyridylferrate(II), AsPh4[FeII(terpy)(CN)3]; and kinetics of oxidation of the complex anion by peroxodisulfate in water and in binary aqueous mixtures

The structure of the title compound has been determined by X-ray crystallography. The octahedral arrangement of ligands about the iron(II) centre is somewhat distorted, with the axial NC–Fe–CN bond angle being 174.3(4)°. The oxidation of the tricyano-2,2,6,2- terpyridylferrate(II) anion by the peroxodisulfate anion has been investigated in water and in binary aqueous mixtures. The reaction follows a second order rate law, with a second-order rate constant of 0.126± 0.001dm3mol–1s–1 at 295.2K. The enthalpy and entropy of activation in water are 51.3±1.8kJmol–1 and –89±5JK–1mol–1 respectively. The rate is retarded on addition of organic cosolvent. The transfer chemical potential of the initial state from water into mixed solvents has been determined from solubility measurements, and compared with the transfer potential of the transition state. Solvent effects on the reaction are discussed in terms of initial state versus transition state solvation.     

Synthesis,metal-exchange kinetics and X-ray structure of the nickel(II) complex of the diazacyclam ligand 1,3,6,10,12,15-hexa-azatricyclo [13.3.1.16,10]eicosane, [NiL] (ClO4)2

The preparation of the nickel(II) complex of the diazacyclam ligand 1,3,6,10,12,15-hexaazatricyclo [13.3.1.16,10]eicosane (2) by the reaction of the nickel(II) complex of N-(2-aminoethyl)-1,3-diaminopropane with formaldehyde in MeOH solution is described. The crystal structure of [NiL](ClO4)2 has been determined. The nickel atom is four coordinate and planar with Ni-N bond lengths of 1.969(4) and 1.928(3)Å in a centrosymmetric structure. The basic diazacyclam ring system has a trans III configuration with the two additional six-membered rings fused in a chair conformation.The kinetics of the metal exchange:for the nickel complexes (1) and (2) have been studied in detail. Under the experimental conditions employed, with copper(II) in at least a tenfold excess, the reaction is independent of the copper(II) concentration. The copper(II) effectively scavenges the free ligand as the nickel(II) complex dissociates. For the nickel complex (1) k = 2 × 10–4 s–1 at 60°C and H = 126 ± 5 kJmol–1 and S298 = 61 ± 15 JK–1mol–1. For the complex (2), k = 1.8 × 10–4 s–1 at 60°C and H = 99 ± 6 kJmol–1 and S298 = –21 ± 10 JK–1 mol–1.     

Structure Development in Simple Cross-Linked Organopolysiloxanes

13C CP and CPPI MAS NMR have been carried out on thermally cured samples of polymethylvinylsiloxane and polydimethylsiloxane. By varying the CP contact time, the and vinyl carbons and the methyl carbon of the CH3–(SiO<)–CH=CH2 species could be identified. A further methyl carbon was detected which was less mobile and which we assign to methyl groups attached to silicon species on which the vinyl group has reacted to form a cross-link. Resonance from – CH2– carbons was observed in the 30–40 ppm range, and these species arise from methyl-vinyl cross-linking to give CH3–(SiO<)– H2– H2–(SiO<)–CH=CH2. Higher temperature curing promotes vinyl-vinyl cross-linking to give CH3–(SiO<)–CH2– H–CH2–(SiO<)–CH3 links between chains. Evidence for this comes from the insensitivity of the carbon resonance under CPPI, indicating that it is in a – CH= rather than a =CH2 environment. There was also evidence of –CH2– carbons in the polydimethylsiloxane material, suggesting that thermally activated, methyl-methyl cross-linking can occur to give CH3–(SiO<)– H2– H2(SiO<)–CH3 links between chains.     

Application of Lanthanide-Sensitised Chemiluminescence to the Determination of Levofloxacin, Moxifloxacin and Trovafloxacin in Tablets

A flow injection method including chemiluminescence detection has been developed and applied to the determination of fluoroquinolones levofloxacin, moxifloxacin and trovafloxacin in tablets. The proposed method is based on the luminescent properties of the system Ce(IV)–sulphite–fluoroquinolone and the addition of a trivalent lanthanide ion as emission-sensitizer. The optimum conditions for chemiluminescence emission were investigated for each fluoroquinolone. The best results were achieved when employing Eu(III) as lanthanide cation for levofloxacin and moxifloxacin, and Tb(III) for trovafloxacin. These fluoroquinolones were determined over the concentration range of 0.5–3.5µgmL^–1, 0.2–3.0µgmL^–1 and 0.008–0.400µgmL^–1, with detection limits of 0.100, 0.035 and 0.008µgmL^–1, respectively. The relative standard deviations were in the range of 1.0–2.5% for all three cases. The method was applied to the determination of three fluoroquinolones in their respective pharmaceutical preparations and compared with an independent UV-spectrophotometric method. The results were satisfactory.     

An independent kinetic and mechanistic study of the secondary reactions in the substitution of [FeL(OH)](n−2)− (L= triethylenetetraaminehexaacetic acid) by cyanide ions

Summary The kinetics of reaction between [Fe(CN)₅OH]^3– and CN^– have been investigated spectrophotometrically at pH=11.00, I=0.25 M(NaClO₄) and temp.=25.0°C by disappearance of the absorption peak at 395 nm. The rate data for this reaction followed first order kinetics in both [Fe(CN)₅OH^3–] and [CN^–]. The second order rate constant (k_f) was found to be (3.44±0.08)×10^–3 M^–1 s^–1. The pH dependence of the reaction was also investigated in the range 9–12. The activation parameters were found to be H=36.4kJ mol^–1 and S=–168JK^–1 mol^–1.The reaction between [Fe(CN)₆]^3– and TTHA^6– (TTHA=triethylenetetraaminehexaacetic acid) has also been followed spectrophotometrically at 420 nm, pH=11.00, I=0.1M (NaClO₄) and temp.=25.0°C. This reaction also followed first order kinetics in both [Fe(CN) ₆ ^3– ] and [TTHA^6–]. The second order rate constant (k_f) was found to be (3.74±0.21)×10^–2 M^–1 s^–1. The rate of reaction was found to increase with pH in the range 9–11.5. The different reactive species of TTHA (L) are H₂L^4– HL^5– and L^6–. The rate constants for these species have been calculated and the pH profile is explained. The values of the activation parameters were found to be H= 30.9 kJmol^–1 and S=–167JK^–1 mol^–1. Electron transfer from [Fe(CN)₆]^3– to the substrate followed by decomposition of the latter is proposed. The oxidation products of TTHA have been investigated by g.l.c.     

Study of the catechins and proanthocyanidins ofQuercus robur

More than 20 compounds have been isolated from the bark ofQuercus robur. Monomers: (–)-epicatechin, (–)-epicatechin gallate, (+)-catechin, (+)-catechin gallate, (+)-gallocatechin, (–)-epigallocatechin, and (–)-epigallocatechin gallate; dimeric proanthocyanidins: (+)-catechin-(4-8)-(+)-catechin, 3-O-galloyl-(+)-catechin-(4-8)-3-O-galloyl-(+)-catechin, 3-O-galloyl-(+)-gallocatechin-(4-8)-(+)-gallocatechin, (–)-epicatechin-(4-8)-3-O-galloyl-(–)-epigallocatechin gallate, 3-O-galloyl-(–)-epicatechin-(4-8)-3-O-galloyl-(–)-epigallocatechin, 3-O-galloyl-(–)-epigallocatechin-(4-8)-(+)-catechin; and oligomeric proanthocyanidins: D14-D19.Materials presented at the IInd International Symposium on the Chemistry of Natural Compounds (SCNC, Eskiehir, Turkey, October, 22–24, 1996).Institute of the Chemistry of Plant Substances, Academy of Sciences of the Republic of Uzbekistan, Tashkent, fax (3712) 40 64 75. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 819–833, November–December, 1997.     

Zur Kenntnis der Reaktionsfähigkeit des unsubstituierten Thiomorpholins und alkylsubstituierter Thiomorpholine. 3. Mitt

A new synthesis of thiomorpholine by ring closure of -chloro--aminodiethylene-sulfide with potassium hydroxide is reported. Numerous reactions of thiomorpholine (1) and, especially, 2-methyl-3-ethyl-thiomorpholine (2) are described such as acylation, diacylation (3–43), reactions with sulfonic acid chlorides (44–52), isocyanates (53–61, 70–75), diisocyanates (62–66, 76–78) and isothiocyanates (67–69, 79–82), alkylation reactions (83–111) and the synthesis of thiomorpholino-dithiocarbamates (112–121).

Teil der Dissertation,E. Wilms, Techn. Hochschule Aachen, 1971.     

Untersuchungen in den Systemen: Mangan—{Vanadin,Rhenium, Eisen}—silicium

Zusammenfassung Die strukturchemischen Verhältnisse werden in den Dreistoffen: Mn–{V, Re, Fe}–Si für einen Zustand –1000° C homogenisiert und abgeschreckt — untersucht. Die neu aufgefundene Mn–Re--Phase ist hinsichtlich der Ordnung mit der Re–Nb--Phase vergleichbar. Mn₅Si₂ wird durch Mn/Re-Austausch bei 1000° C stabilisiert. Einer ternären Kristallart (X) mit erheblichem Homogenitätsgebiet kommt die ungefähre Formel Mn_2–3Re_2–1Si zu. Der Austausch Mn/Re in Mn₅Si₃ erfolgt nur in der 6g-Lage. MnSi und ReSi sind lückenlos mischbar.Gitterparameter für die Mn–Re–Si- und V–Mn–Si--Phasen werden bestimmt. V₃Si löst etwa 50 Mol% Mn₃Si. Die lückenlose Mischreihe Mn₃Si–Fe₃Si wird bestätigt; gegenüber Literaturbefunden besteht jedoch im ganzen Bereich ein Ordnungszustand (BiF₃-Typ).

---

The ternary systems: Mn–{V, Re, Fe}–Si have been studied after anneal at 1000° C followed by a quench by means of X-ray methods. The newly found Mn–Re--phase compares with the Re–Nb--phase as far as the ordering is concerned. Mn₅Si₂ can be stabilized by Re/Mn-substitution up to higher temperatures. A ternary phase X having a large homogeneous region, can roughly be described by a formula Mn_2–3Re_2–1Si. Re substitutes Mn within the Mn₅Si₃-phase occupying the 6g positions only. Lattice parameters of the Mn–Re–Si- and V–Mn–Si--phases have been determined. V₃Si dissolves about 50 mole% Mn₃Si. The solid solutions Mn₃Si–Fe₃Si can be confirmed; however there is an ordering throughout the whole domain (BiF₃-structure type).

---

---

Mit 2 Abbildungen     

Application of l-cysteine-capped nano-ZnS as a fluorescence probe for the determination of proteins

Nanometer-sized l-cysteine-capped ZnS particles have been synthesized and used as a fluorescence probe to investigate the effect of proteins on fluorescent intensity. With =190 nm, maximum and constant synchronous fluorescence enhancement was produced at 267 nm and pH 5.12 in the presence of proteins. A highly sensitive synchronous fluorescence method for the rapid determination of proteins has been developed. Under optimum conditions, calibration graphs are linear over the range 0.03–8.0 g mL^–1 for bovine serum albumin (BSA), 0.01–6.0 g mL^–1 for human serum albumin (HSA), 0.05–8.0 g mL^–1 for -globulin (-G), and 0.04–4.0 g mL^–1 for ovalbumin, respectively. The relative standard deviations of seven replicate measurements were 1.75% for 1.0 g mL^–1 BSA, 1.90% for 1.0 g mL^–1 HSA, 1.65% for 1.0 g mL^–1 -G, and 2.32% for 1.0 g mL^–1 ovalbumin.     

Kinetics and mechanism of the reaction of aquachromium(III) with l-ascorbic acid in aqueous media

The kinetics of the reaction of l-ascorbic acid (H2A) with aquachromium(III) has been studied over the range 0.04 [H2A]T 0.16 mol dm–3, 3.5 pH 6.0, 25.0 t 50.0C, 0.03 I 1.0 mol dm–3 (KNO3) and 0% [MeOH] 20% (v/v). The reaction takes place via an outer-sphere association between Cr3+/CrOH2+ and H2A, followed by transformation of the outer- into an inner-sphere complex by slow interchange. The anation rate constants for Cr3+ and CrOH2+ species (k1 and k2) at 25C and I=1.0moldm–3 (KNO3) are 1.68×10–4 and 2.14×10–4s–1, respectively. H and S for the k1 and k2 paths are 27.0±2kJmol–1, –227±5J K–1mol–1 and 57.2± 4kJmol–1, –123±14JK–1mol–1, respectively. Anation of Cr(H2O)3+6 and Cr(H2O)5OH2+ follow an Ia path.     

Adsorptive Voltammetric Study of Thorium–Alizarin Complexon Complex at a Carbon Paste Electrode

A new sensitive adsorptive voltammetric procedure is described for trace measurement of thorium. It is based on the cathodic stripping peak of the thorium–alizarin complexon (ALC) complex at a carbon paste electrode (CPE). The complex of Th(IV) with alizarin is adsorbed at a CPE in a mixed buffer solution (pH 5.0) which consists of 0.1mol·L^–1 sodium acetate and 0.04mol·L^–1 potassium biphthalate, yielding a sensitive cathodic voltammetric peak corresponding to the reduction of alizarin in the complex at –0.57V (vs. SCE). The second-order derivative peak current of the complex is linearly dependent upon the concentration of Th(IV) over the range of 3.0×10^–9 8.0×10^–7mol·L^–1. The detection limit is 1.0×10^–9mol·L^–1 for 180s accumulation. The molar ratio of each component in the complex was estimated as n_Th(IV):n_ALC=1:1 by a continuous variation method. The electrode processes of the Th(IV)–alizarin complex at a CPE were investigated. The procedure was successfully applied to the trace determination of thorium in ore and clay samples.     

Synthesis of the composite material of polyaniline/NiO/sodium dodecylbenzenesulfonate in micelles

The composite material of polyaniline/NiO/sodium dodecylbenzenesulfonate (SDBS) is synthesized in SDBS micelles. The composite material has satisfactory conductivity and thermostability, and the particle length, width, and thickness are about 200–500 m, 3–5 m, and 40–96 nm, respectively.     

Magnetic properties of new copper(II) and [copper(II)]3-manganese(II) complexes of [14]N4 macrocyclic oxamides

Four new complexes of [14]N4 macrocyclic oxamides, namely [CuL1], [CuL2], [(CuL1)3Mn](ClO4)3 and [(CuL2)3 Mn](ClO4)3 [L1 and L2 are the dianions of 2,3-dioxo-5,6: 3,14-dibenzo-7,12-bis(ethoxycarbonyl)-1,4,8,11-tetraazacyclotetradeca-7,11-diene (H2L1) and 2,3-dioxo-5,6:13,14-dibenzo-9-methyl-7,12-bis(ethoxycarbonyl)-1,4,8,11-tetraazacyclo-tetradeca-7,11-diene (H2L2), respectively], have been prepared and characterized. The observed magnetic susceptibilities of the [(CuL1)3Mn] (ClO4)3 complex over the ca. 2–300 K range have been fitted to theoretical equations based on the Heisenberg spin Hamiltonian =–2JMn(Cu1+ Cu2+Cu3) and molecular field approximation. The results indicated that both the intramolecular and intermolecular magnetic interactions are antiferromagnetic with JCuMn= –19.8cm–1 and zJ=–1.41cm–1.     

Proanthocyanidins ofPolygonum coriarium III. Structures of proanthocyanidins T1 and T2

The roots ofPolygonum coriarum have yielded two oligomeric proanthocyanidins, T1 and T2, and their structures have been established: 3-O-galloyl-7-O-[O-(6-O-galloyl)--D-glucopyranosyl]-(–)-epigallocatechin-(4-8)-(–)-epicatechin-(4-8)-(–)-epicatechin-(4-8)-(–)-epigallocatechin 3-O-gallate (T1) and (–)-epicatechin-(4-8)-[3-O-galloyl-(–)-epigallocatechin]-(4-8)-(–)-epicatechin-(4-8)-(+)-catechin (T2).The material of this paper were presented at the IInd International Symposium on the Chemistry of Natural Compounds (SCNC, Eskisehir, Turkey, October 22–24, 1996).Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 588–593, July–August, 1977.     

Spectral and kinetic characteristics of the α-propionic acid methyl ester radical in cyclohexane and water

The -propionic acid methyl ester radical was produced in dissociative electron capture reaction of 2-chloropropionic acid methyl ester. The absorption maxima of the radical are at 310 and 300 nm in cyclohexane and water with extinction coefficients of 440±50 and 400±50 mol^–1 dm³ cm^–1. The second order decay rate parameter in water is (2.3±0.5)×10⁹ mol^–1 dm³ s^–1. The peroxy radicals have the characteristics: _max=265–270 nm, _max=700–900 mol^–1 dm³ and 2k=(7±2)·10⁸ mol^–1 dm³ s^–1.     

Kinetics and mechanism of osmium(VIII) mediated cerium(IV) oxidation of dimethylsulfoxide in aqueous sulfuric acid

Under the experimental conditions [DMSO]T [CeIV]T [Os]T the kinetics of oxidation of dimethylsulfoxide (DMSO) to dimethylsulfone (DMSO2) have been followed at different temperatures (40–55°C) in 1.0 mol dm–3 sulfuric acid media. The rate of disappearance of [CeIV] shows a first-order dependence on both [Os]T and [DMSO]T and zeroth-order kinetics with respect to [CeIV]. The suggested mechanism involves oxidation of DMSO by OsVIII in a rate-determining step through an outer-sphere mechanism, followed by rapid regeneration of OsVIII by CeIV from OsVI. The rate law conforms to: –d[CeIV]/dt=k0=k[Os]T[DMSO]T. The values of k and the activation parameters are: 102k=(4.9 ± 0.10) mol–1 dm3 s–1 at 40°C, [H2SO4] =1.0 mol dm–3;H=58±3kJmol–1, S= –88 ±5JK–1mol–1.     

Ab initio calculations of potential energy surface for reaction of nucleophilic addition of H− ion to methylacetylene

Within the framework of the Hartree-Fock-Roothaan Method, using double- basis sets 3-21++G and (6-31-H-G//3-21++G), the minimum energy paths (MEPs) have been calculated for reactions of nucleophilic addition of the hydride ion H^– to the methylacetylene molecule: CH₃-CCH+H^–[CH₃-CH=CH]^– (1) CH₃-CCH+H^–[CH₃-C=CH₂]^– (2). It has been established that the activation energy for reaction (2) is 7.02 kJ/mole lower than for reaction (1). An analysis has been made of the character of electron density distribution along the MEP of each reaction. It has been shown that distortion of geometry of the reactants plays an important role in intensifying the interaction of the frontier orbitals. The reasons for nonfulfillment of Markownikoff's rule for these reactions have been determined. The results from the calculations are compared with calculations reported in the literature for the related reaction of nucleophilic addition of the hydride ion H^– to the acetylene molecule: HCCH+H^–[CH₂=CH]^–.Translated from Teoreticheskaya i Éxperimental'naya Khimiya, Vol. 21, No. 3, pp. 303–309, May–June, 1985.