Ru L2,3 XANES theoretical simulation with DFT: A test of the core-hole treatment

Density functional theory (DFT)-based relativistic calculations were performed to model the Ru L-edge X-ray absorption near edge structure (XANES) spectra of the hexaammineruthenium complex [Ru(NH₃)₆]³⁺ and “blue dimer” water oxidation catalyst, cis,cis- [(bpy)₂(H₂O)Ru^IIIORu^III(OH₂)(bpy)₂]⁴⁺ (bpy is 2,2-bipyridine). Two computational approaches were compared: simulations without the core-hole and by modeling of the core-hole within the Z+1 approximation. Good agreement between calculated and experimental XANES spectra is achieved without including the core-hole. Simulations with algorithms beyond the Z+1 approximation were only possible in a framework of the scalar relativistic treatment. Time-dependent DFT (TD-DFT) was used to compute the Ru L-edge spectrum for [Ru(NH₃)₆]³⁺ model compound. Three different core-hole treatments were compared in a real-space full multiple scattering XANES modeling within the Green function formalism (implemented in the FEFF9.5 package) for the [Ru(Mebimpy)(bpm)(H₂O)]²⁺ complex. The latter approaches worked well in cases where spin–orbit treatment of relativistic effects is not required.     

99Ru,61Ni,57Fe,and119Sn Mössbauer studies of Heusler alloys containing ruthenium

⁹⁹Ru,⁶¹Ni,⁵⁷Fe and¹¹⁹Sn Mössbauer spectroscopic studies were made on ternary intermetallic compounds containing ruthenium, Ru_xY_3?xZ (Y=Fe, Ni; Z=Si, Sn). In the system of Ru_xFe_3?xSi, two different hyperfine magnetic fields were observed at the⁹⁹Ru nuclei (H _hf[Ru]) in the range ofx≤1.0 and the magnitude of eachH _hf[Ru] was found to decrease with an increase in the ruthenium concentrationx. Both the⁹⁹Ru and¹¹⁹Sn Mössbauer spectra of Ru₂FeSn could be analyzed with two sets of magnetically split lines. The⁶¹Ni Mössbauer spectra of Ru₂NiSn were obtained at 5 and 77 K.     

Converting an Almost Noncytotoxic Ru(II) Complex with Photolabile Ligands into a Highly Efficient PACT Agent

Ru(II) complexes with weak ligand fields may undergo light-induced ligand dissociation, and the resulted Ru(II) aqua complexes may bind with biomolecules such as DNA, showing potential as photoactivated chemotherapy (PACT) agents. However, Ru(II) complexes with efficient PACT activity are still rare. Some Ru(II) complexes exhibit efficient photoinduced ligand dissociation but poor cytotoxicity. It is speculated that the low nuclear accumulation levels may account for their low PACT efficacy. In order to confirm this hypothesis, the almost noncytotoxic [Ru(7-OCH₃-dppz)(4-OCH₃-py)₄](PF₆)₂ (Ru1) is loaded on nucleus-targeted C₅N₂ nanoparticles (NPs). Compared with the free Ru1, Ru1–C₅N₂ NPs exhibit significantly increased cellular uptake and nuclear accumulation. Therefore, Ru1–C₅N₂ NPs show efficient PACT activity toward various cancer cell lines (including cisplatin-resistant one) with half maximal inhibitory concentration (IC₅₀) values of 0.18 × 10⁻⁶–0.29 × 10⁻⁶ m and phototoxicity index (IC₅₀^dark/IC₅₀^light) values above 137 under both normoxic and hypoxic conditions. Moreover, Ru1–C₅N₂ NPs also exhibit efficient PACT activity toward cisplatin-resistant 3D multicellular tumor spheroids upon two-photon irradiation (800 nm). The same strategy is also feasible to greatly improve the PACT activity of [Ru(7-OCH₃-dppz)(py)₄]²⁺, which itself only has a medium effect. The results may provide new sights for developing efficient Ru(II) PACT agents.     

Sonochemical effect on two new Ruthenium(II) complexes with ligand (E)-N-((6-bromopyridin-2-yl)methylene)-4-(methylthio)aniline precursors for synthesis of RuO2 nanoparticles

Two novel Ru(II) complexes [(η⁶-p-cymene)RuCl(L2)]PF₆ (R2) and [(η⁶-C₆H₆)RuCl(L2)]PF₆ (R4), with ligand (E)-N-((6-bromopyridin-2-yl)methylene)-4-(methylthio)aniline (L2), were synthesized and characterized by elemental analysis, ¹H NMR, ¹³C NMR and IR spectroscopy. Based on X-ray crystallography studies, complexes R2 and R4 have coordination environments with formulated (η⁶-p-cymene)Ru(N₂Cl) and (η⁶-C₆H₆)Ru(N₂Cl), respectively. The thermal stabilities of compounds R2 and R4 were studied by thermal gravimetric (TG) and differential scanning calorimetry (DSC). Thermal decomposition of these complexes was at 280 °C and 260 °C under air atmosphere respectively. The interaction of these complexes with calf thymus DNA (CT-DNA) was explored through electronic absorption spectra, fluorescence and redox behavior studies. The results showed that the complexes bind to CT-DNA with electrostatic interactions. Nanoparticles of RuO₂ were prepared by calcination of R2 and R4. Also the role of the ultrasound waves on the characteristics of the RuO₂ nanoparticles was studied. The nanoparticles were characterized by IR spectroscopy and X-ray diffraction (XRD). Also size and morphology of nanoparticles were studied by scanning electron microscopy (SEM).     

Isomer shifts and changes of the nuclear charge radii in99Ru and101Ru

The recoilless nuclear gamma resonance of the 127 keV γ-rays of¹⁰¹Ru was observed in ruthenium metal, RuO₂ and [Ru(NH₃)₄(HSO₃)₂]. By comparison of the isomer shifts observed in these materials for the 127 keV absorption line with the corresponding shifts of the 90keV γ-rays of⁹⁹Ru one obtains δ〈r ²〉 [127 keV]/ δ〈r ²〉 [90 keV]=1.78±0.26 for the ratio of the changes of the mean square nuclear charge radii between the first excited and the ground states in these nuclei. An estimate of electron density differences based on free-ion relativistic self-consistent field calculations yields δ〈r ²〉[90keV]≈+1.4·10^?3 for⁹⁹Ru and δ〈r ²〉/〈r ²〉 [127 keV]≈+2.4·10^?3 for the¹⁰¹Ru case. These results are discussed in terms of the core excitation model.     

Initial oxidation of the Ce–Ru(0001) interface

Initial oxidation of the Ce–Ru(0001) overlayer system has been studied by photoelectron spectroscopy and low energy electron diffraction. The Ce overlayer thicknesses ranged from 2 to 7 Å. The interface was studied at annealing temperatures up to 1000°C and it was oxidized at low oxygen exposures up to 68 l at 500°C. Interactions between Ce and Ru at the interface were indicated by intensity variations of the Ce3d4f² and Ce3d4f⁰ features with annealing temperature. No intermixing between Ce and Ru exceeding one monolayer was observed. Upon oxidation, trivalent Ce₂O₃ oxide was initially observed at the surface. With increased oxygen exposures, a conversion from trivalent oxide to ‘tetravalent’ CeO₂ was seen. The Ce overlayer had no catalytic effect on oxidation of the Ru substrate in contrast to previous studies on other refractory metal, such as Nb, Ta or W.     

Behavior of Ru surfaces after ozonated water treatment

In order for the development of cleaning technology of extreme ultra violet lithography photomask, the behavior of Ru surfaces after treatment with ozonated deionized water (DIO₃) solution was studied using Ru and ruthenium oxide particles and 2 nm-thick Ru capping layers. No significant changes in crystalline structures or chemical states of the Ru surfaces, nor any similarities with the structures or states of ruthenium oxide, were observed after DIO₃ treatment. Oxidation of ruthenium to form RuO₂ or RuO₃ was not observed. Adsorption of H₂O molecules on the Ru layer increased the surface roughness, but the desorption of H₂O molecules recovered it. Local chemisorption of H₂O molecules on the Ru surface may be the reason why rougher Ru surfaces were observed after DIO₃ cleaning.     

99Ru Mössbauer spectroscopic study on salts of ruthenocene with halogens

⁹⁹Ru Mössbauer spectra at 5 K have been measured on samples of salts of ruthenocene with halogens, expressed as [Ru(C₅H₅)₂X]Y (X=Cl, Br, Y=PF₆, and X=1, Y=13). The values of both the isomer shift and the quadrupole splitting of these salts with halogens are larger compared to those of ruthenocene. It is concluded that ruthenocene gives salts having direct chemical bonding between Ru and Cl, Br, or I, and that the Ru atom in each salt is in a higher oxidation state than 2+ in ruthenocene.     

Ultrasound-assisted green synthesis of Ru supported on LDH-CNT composites as an efficient catalyst for N-ethylcarbazole hydrogenation

N-ethylcarbazole/dodecahydro-N-ethylcarbazole (NEC/12H-NEC) is one of the most attractive LOHCs, and it is of great significance to develop catalysts with high activity and reduce the hydrogen storage temperature. Layered double hydroxides-carbon nanotubes composites (LDH-CNT) were synthesized by a simple in-situ assembly method. Due to the introduction of CNT, a strong interaction occurred between LDH and CNT, which effectively improved the electron transfer ability of LDH-CNT. Ru/LDH-CNT catalysts were prepared via ultrasound-assisted reduction method without adding reducing agents and stabilizers. Under the cavitation effect of ultrasound, the hydroxyl groups on the surface of LDH were excited to generate hydrogen radicals (•H) with high reducibility, which successfully reduced Ru³⁺ to Ru NPs. Ru/LDH-3.9CNT-(300-1) catalyst was of 1.63 nm average Ru particle size with CNT amount of 3.9 wt% and the ultrasonic power of 300 W at 1 h, and its electron transfer resistance was less than that of Ru/LDH-(300-1). The synergy of ultrafine Ru NPs and fast electron transfer made it exhibit exceptional catalytic performance in NEC hydrogenation. Even if the reaction temperature was lowered to 80 °C, its hydrogenation performance was better than that of commercial Ru/Al₂O₃ catalyst at 120 °C. The ultrasound-assisted method is efficient, green and environmentally friendly, and the operation process is simple and economical. It is expected to be used in practical industrial production, which provides a reference for the preparation of high-activity and low-temperature hydrogen storage catalysts.     

A Ru(II)-Based Nanoassembly Exhibiting Theranostic PACT Activity in NIR Region

Photoactivated chemotherapy (PACT) has appealing merits over traditional chemotherapy as well as photodynamic therapy (PDT) by virtue of its spatial and temporal control on drug activity and oxygen-independent mechanisms of action. However, the short photoactivation wavelengths, e.g., visible light–activated Ru(II)-based PACT agents, limit the clinical application severely. In this work, a facile construction of supramolecular nanoparticles from a poly(ethylene glycol) (PEG)-modified [Ru(dip)₂(py-SO₃)]⁺ (abbreviated as Ru-PEG, dip = 4,7-diphenyl-1,10-phenanthroline, py-SO₃ = pyridine-2-sulfonate) and 1,3-phenylenebis(pyren-1-ylmethanone) (BP) is shown. While Ru-PEG may undergo photoinduced ligand dissociation and release anticancer species of [Ru(dip)₂(H₂O)₂]²⁺, BP has extremely large two-photon absorption cross sections (δ₂) in the NIR region and intense fluorescence over the wavelengths where Ru-PEG has strong absorption. Thus, two-photon excitation of BP followed by an efficient Förster resonance energy transfer (FRET) from BP to Ru-PEG may lead to a potent inactivation against cisplatin-resistant cancer cells and 3D multicellular tumor spheroids (MCTSs). The residue fluorescence of BP also allows the cellular uptake of the particles to be visualized. This work provides a universal and convenient strategy to realize theranostic PACT in the ideal phototherapeutic window of 650–900 nm.     

Sonochemical synthesis and characterization of nano-sized lead(II) 3D coordination polymer: Precursor for the synthesis of lead(II) oxybromide nanoparticles

Nanoparticles of a three-dimensional coordination polymer, [Pb(L)(μ₂-Br)(H₂O)]_n (1), (L^? = 1H-1,2,4-triazole-3-carboxylate), have been synthesized by an ultrasonic method and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. The thermal stability of compound 1 both its bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal (DTA) analyses and compared each other. Concentration of initial reagents effects and the role of power ultrasound irradiation on size and morphology of nano-structured compound 1, have been studied. Calcination of the compound 1 at 500 °C under air atmosphere yields Pb₃O₂Br₂ nanoparticles.     

C2H4在清洁和有Cs覆盖的Ru(0001)表面吸附的TDS研究

用热脱附谱(TDS)方法研究了乙烯(C₂H₄)在Ru(0001)表面上的吸附.在低温下(200K以下)乙烯可以在清洁及有Cs的Ru(0001)表面上以分子状态稳定吸附,在衬底温度升高至200K以上时,乙烯发生了脱氢分解反应,乙烯分解后的主要产物为乙炔(C₂H₂).在清洁的Ru(0001)表面,乙烯有两种吸附状态,脱附温度分别为275K和360K.而乙炔的脱附温度为350K.在Ru(0001)表面有Cs的存在时,乙烯分解 关键词： 乙烯 钌(0001)表面 铯钌(0001)表面乙烯 钌(0001)表面 铯钌(0001)表面     

Sonochemical syntheses and characterization of nano-sized lead(II) coordination polymer with ligand 1H-1,2,4-triazole-3-carboxylate

Nanoparticles of a two-dimensional coordination polymer, {[Pb(L)(μ_1,1-NCS)(H₂O)]}_n (1), (L⁻ = 1H-1,2,4-triazole-3-carboxylate), have been synthesized by a sonochemical process and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. The thermal stability of compound 1 both its bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal (DTA) analyses and compared each other. Concentration of initial reagents effects and the role of power ultrasound irradiation on size and morphology of nano-structured compound 1, have been studied. Calcination of the single crystals and nano-sized compound 1 at 400 °C under air atmosphere yields mixture of PbS and Pb₂(SO₄)O nanoparticles. Results show that the size and morphology of the PbS and Pb₂(SO₄)O nanoparticles are dependent upon the particles size of compound 1. A decrease in the particles size of compound 1 leads to a decrease in the particles size of the PbS and Pb₂(SO₄)O.     

The synthesis of boron-containing nanoparticles inert at room temperature

Boron-containing (C₂B₄H₂) _n nanoparticles with size 6.7, 7.8, and 10.8 nm inert at room temperature were synthesized. The synthesis was performed by the pyrolysis of gaseous carborane C₂B₄H₆ at 1200–1280 K and the initial carborane pressure (5–25) × 10⁻³ MPa. An analytic dependence relating the size of nanoparticles to the temperature and initial carborane pressure was obtained.     

Reactivity of 3-hexyne on oxygen modified Ru(0 0 1) surfaces: Observation of oxametallacycles by RAIRS

The chemical behaviour of 3-hexyne on oxygen modified Ru(0 0 1) surfaces has been analysed under ultrahigh-vacuum, using reflection-absorption infrared spectroscopy (RAIRS). The effects of oxygen coverage, 3-hexyne exposure and adsorption temperature were studied. Two modified Ru(0 0 1) surfaces were prepared: Ru(0 0 1)-(2 × 2)-O and Ru(0 0 1)-(2 × 1)-O that correspond to oxygen coverages (θ_O) of 0.25 and 0.5 ML, respectively. The striking result is the direct bonding to an O atom when the modified surfaces are exposed to a very low dose (0.2 L) of 3-hexyne at low temperature (100 K). For θ_O = 0.25 ML, an unsaturated oxametallacycle [Ru-O-C(C₂H₅)C(C₂H₅)-Ru] is proposed, identified by RAIRS for the first time, through the νCC and νCO modes. Further decomposition at 110 K yields smaller oxygenated intermediates, such as acetyl [μ₃-η²(C,O)-CH₃CO], co-adsorbed with a small amount of carbon monoxide and non-dissociated species. The temperature at which a fraction of molecules undergoes complete C-C and C-H bond breaking is thus much lower than on clean Ru(0 0 1). The ultimate decomposition product observed by RAIRS at 220 K is methylidyne [CH]. Another key observation was that the adsorption temperature is not determinant of the reaction route, contrarily to what occurs on clean Ru(0 0 1): even when 3- hexyne strikes the surface at a rather high temperature (220 K), the multiple bond does not break completely. For θ_O = 0.5 ML, a saturated oxametallacycle [Ru-O-CH(C₂H₅)-CH(C₂H₅)-Ru] is also proposed at 100 K, identified by the ν_asO-C-C (at 1043 cm⁻¹) and ν_sO-C-C (at 897 cm⁻¹) modes, showing that some decomposition with C-H bond breaking occurs. For this oxygen coverage, the reaction temperatures are lower, and the intermediate surface species are less stable.     

Synthesis,Characterization and Luminescence Sensitivity with Variance in pH,DNA and BSA Binding Studies of Ru(II) Polypyridyl Complexes

Three ruthenium(II) polypyridyl complexes, [Ru(phen)₂(mip)](ClO₄)₂ (1) (phen =1,10-Phenanthroline), [Ru(bpy)₂(mip)](ClO₄)₂ (2) (bpy = 2,2’bipyridyl) and [Ru(dmb)₂(mip)](ClO₄)₂ (3) (dmb = 4, 4′-dimethyl 2, 2′-bipyridine), were synthesized with an intercalative ligand mip (2-morpholino-1H-imidazo[4,5-f][1, 10]phenanthroline) and characterized by ¹H, ¹³C–NMR, IR, UV-vis, mass spectra and elemental analysis. pH effect, ion selectivity (cations, anions) and solvent sensitivity of complexes were studied. The interaction of these complexes with DNA was performed using absorption, emission spectroscopy and viscosity measurements. The experimental results indicated that the two complexes interacted with calf thymus DNA (CT-DNA) by intercalative mode. BSA (Bovine Serum Albumin) protein binding of these complexes was studied by UV-visible and fluorescence techniques. The binding capacity of these complexes was explained theoretically by molecular docking method.     

Superlattice CoCrPt/Ru/CoFe structure fabricated by pulsed laser deposition

The synthetic antiferromagnets (SAF) have been used in spin-valve sensor in data storage industry [1]. We report a new hard/Ru/soft sandwich structure (SHBL) fabricated by pulsed lased deposition to replace current single layer structure for information recording application. SHBL consists of two magnetic layers separated by thin nonmagnetic layers, typically with Ru layers of 0.7-1.2 nm, through which antiferromagnetic coupling is induced. Varying the relative thickness of the magnetic layers, the spacer layers, and the type of magnetic materials can alter magnetic properties of CoCrPt/Ru/CoFe superlattice. The coercivity H_c and grain size of magnetic layer is also dependent on the laser fluence. High laser fluence results in both small grain size and high H_c. The observed phenomena are related to high quenching and deposition rates during PLD at high fluence, resulting in more pronounced phase segregation.     

Two salts and the salt cocrystal of ciprofloxacin with thiobarbituric and barbituric acids: The structure and properties

Ciprofloxacin (CfH, C₁₇H₁₈FN₃O₃) crystallizes with 2‐thiobarbituric (H₂tba) and barbituric acid (H₂ba) in the aqueous solution to yield salt CfH₂(Htba)·3H₂O ( 1 ), salt cocrystal CfH₂(Hba)(H₂ba)·3H₂O ( 2 ), and salt CfH₂(Hba)·H₂O ( 3 ). The compounds are structurally characterized by the X‐ray single‐crystal diffraction. The numerous intermolecular hydrogen bonds N–H?O and O–H?O formed by water molecules, Htba^?/Hba^? and CfH₂⁺ ions, and H₂ba molecules stabilize the crystal structures of 1 to 3 . Hydrogen bonds form a 2D plane network in the salts of 1 and 3 and a 3D network in the salt cocrystal of 2 . There are different π‐π interactions in 1 to 3 . The compounds have been characterized by powder X‐ray diffraction, thermogravimetry/differential scanning calorimetry, and Fourier transform infrared spectroscopy. The compounds dehydration ends at 130°C to 150°C, and their oxidative decomposition is observed in the range of 250°C to 275°C.     

Ion beam shaping of embedded metal nanoparticles by Si+ ion irradiation

Fine Co and Pt nanoparticles are nucleated when a silica sample is implanted with 400 keV Co⁺ and 1370 keV Pt⁺ ions. At the implanted range, Co and Pt react to form small Co _x Pt_(1?x) nanoparticles during Si⁺ ion irradiation at 300 °C. Thermal annealing of the pre-implanted silica substrate at 1000 °C results in the formation of spherical nanoparticles of various sizes. When irradiated with Si⁺ ions at 300 °C, particles in the size range of 5–17 nm undergo rod-like shape transformation with an elongation in the direction of the incident ion beam, while those particles in the size range of 17–26 nm turn into elliptical shape. Moreover, it is suspected that very big nanoparticles (size >26 nm) decrease in size, while small nanoparticles (size <5 nm) do not undergo any transformation. During Si⁺ ion irradiation, the crystalline nature of the nanoparticles is preserved. The results are discussed in the light of the thermal spike model.     

In‐situ Raman spectroscopy study of Ru/TiO2 catalyst in the selective methanation of CO

Raman spectroscopic technique has been used to characterize a Ru/TiO₂ catalyst and to follow in situ their structural changes during the CO selective methanation reaction (S‐MET). For a better comprehension of the catalytic mechanism, the in‐situ Raman study of the catalysts activation (reduction) process, the isolated CO and CO₂ methanation reactions and the effect of the composition of the reactive stream (H₂O and CO₂ presence) have been carried out. Raman spectroscopy evidences that the catalyst is composed by islands of TiO₂–RuO₂ solid solutions, constituting Ru–TiO₂ interphases in the form of Ru_xTi_{1 − x}O₂ rutile type solid solutions. The activation procedure with H₂ at 300 °C promotes the reduction of the RuO₂–TiO₂ islands generating Ru^o–Ti³⁺ centers. The spectroscopic changes are in agreement with the strong increase in chemical reactivity as increasing the carbonaceous intermediates observed. The selective methanation of CO proceeds after their adsorption on these Ru^o–Ti³⁺ active centers and subsequent C―O dissociation throughout the formation of CH_x/C_nH_x/C_nH_xO/CH_x―CO species. These intermediates are transformed into CH₄ by a combination of hydrogenation reactions. The formation of carbonaceous species during the methanation of CO and CO₂ suggests that the CO presence is required to promote the CO₂ methanation. Similar carbonaceous species are detected when the selective CO methanation is carried out with water in the stream. However, the activation of the catalysts occurs at much lower temperatures, and the carbon oxidation is favored by the oxidative effect of water. Copyright © 2015 John Wiley & Sons, Ltd.