Microchip capillary electrophoresis/electrochemical detection of hydrazine compounds at a cobalt phthalocyanine modified electrochemical detector

This article reports on the use of cobalt(II) phthalocyanine (CoPc)-modified carbon paste amperometric detector for monitoring hydrazine compounds following their microchip separation. The marked catalytic electrochemical properties of CoPc-modified electrode display enhanced sensitivity compared with unmodified carbon pastes at a relatively low detection potential (+0.5 V versus Ag/AgCl). Factors influencing the on-chip separation and detection processes have been optimized. Three hydrazines (hydrazine, 1,1 dimethylhydrazine, and phenylhydrazine) have been separated within 130 s at a separation voltage of 1 kV using a 10 mM phosphate run buffer (pH 6.5). The detection limits obtained from using the CoPc-modified carbon paste electrodes for hydrazine and phenylhydrazine are 0.5 and 0.7 μM, respectively, with linearity over the 20–200 μM range examined. Such miniaturization and speed advantages of microchip CE are coupled to the highly sensitivity and convenient preparation of CoPc-modified carbon paste electrode. The resulting microsystem should be attractive for field monitoring of toxic hydrazine compounds in environmental applications.     

A review of pulsed electrochemical detection following liquid chromatography and capillary electrophoresis

Pulsed electrochemical detection (PED) has progressed as a highly sensitive and selective detection technique following aqueous-based separation systems over the past three decades. The application of on-line pulsed potential cleaning to electrocatalytic noble metal electrodes has significantly increased the number of applications formerly achieved with conventional electrochemical (EC) detection. Electrochemical cells are easily miniaturized, providing the ability to apply detection by PED at microelectrodes and onto microchips utilizing electrophoretic separations. In addition, recent advances in PED waveforms and instrumentation have enabled the detection technique to be easily coupled with high pressure separation systems which require rapid detection to maintain separation integrity. As a result, advanced applications for the determination of carbohydrates as well as the expansion of PED for the detection of other organic aliphatic compounds have been recently accomplished. This review will focus on developments and methods utilizing PED following liquid chromatography (LC) and capillary electrophoresis (CE). Publications are reviewed in chronological order to emphasize the advancement of the detection method and the sustained relevance of its applications.     

Simplified current decoupler for microchip capillary electrophoresis with electrochemical and pulsed amperometric detection

There is a need to develop broadly applicable, highly sensitive detection methods for microchip CE that do not require analyte derivatization. LIF is highly sensitive but typically requires analyte derivatization. Electrochemistry provides an alternative method for direct analyte detection; however, in its most common form, direct current (DC) amperometry, it is limited to a small number of easily oxidizable or reducible analytes. Pulsed amperometric detection (PAD) is an alternative waveform that can increase the number of electrochemically detectable analytes. Increasing sensitivity for electrochemical detection (EC) and PAD requires the isolation of detection current (nA) from the separation current (muA) in a process generally referred to as current decoupling. Here, we present the development of a simple integrated decoupler to improve sensitivity and its coupling with PAD. A Pd microwire is used as the cathode for decoupling and a second Au or Pt wire is used as the working electrode for either EC or PAD. The electrode system is easy to make, requiring no clean-room facilities or specialized metallization systems. Sensitive detection of a wide range of analytes is shown to be possible using this system. Using this system we were able to achieve detection limits as low as 5 nM for dopamine, 74 nM for glutathione, and 100 nM for glucose.     

Microchip capillary electrophoresis with amperometric detection for several carbohydrates

Microchip capillary electrophoresis (μCE) with amperometric detection at Cu electrode benefited fast separation and direct detection of carbohydrates. The working electrode of 50-μm Cu wire attached nearly against the channel outlet—4 μm, where it benefited collecting detection current and suppressing overwhelming noise. The use of alkaline medium was essential to separating and detecting carbohydrates, which dissociated into the sensitive alcolate anions. The 10-cm serpentine chip, though lengthening the migration time, it provided better efficiency. Sucrose, cellobiose, glucose, and fructose migrated from the outlet in 400 s +2000 V. The linear calibration plots ranging from 10 to 1000 μM with regression coefficients better than 0.996 were obtained. The injection-to-injection reproducibility of 1.24% (n=7) for glucose in peak current and 0.6% for migration times were excellent. The detection limit was low, down to 2.3 μM for glucose (S/N=3) or 27.6 attomole in mass detection.     

Microchip electrophoresis coupled with on-line magnetic separation and chemiluminescence detection for multiplexed immunoassay

A facile and universal strategy for multiplexed immunoassay is proposed. The strategy is based on microchip electrophoresis (MCE) coupled with on-line magnetic separation and chemiluminescence (CL) detection. The system consisted of a microchip, an electromagnet, and a photomultiplier. The realization of multiplexed immunoassay protocol involves sampling magnetic nanoparticles (MNPs) labeled antibodies, N-(4-aminobutyl)-N-ethyl-isoluminol (ABEI) labeled antigens and free antigens in the precolumn reactor, on-line immunoreaction, capturing the MNPs-immunocomplexes, and the separation of unconjugated ABEI-labeled antigens. After on-line magnetic separation, the free ABEI-labeled antigens were transported into the separation channel, and mixed with hydrogen peroxide (H(2) O(2) ) in the presence of horseradish peroxidase in the postcolumn reactor, and producing CL emission. Using this arrangement, multiple analytes could be measured simultaneously by performing the technical operations for a single assay. As a proof-of-concept, the multiplexed immunoassay was evaluated for the simultaneous determination of five model analytes (i.e. hydrocortisone, corticosterone, digoxin, testosterone, and estriol). The results exhibited excellent precision and sensitivity, the relative standard deviations for nine times detection were lower than 4.7% for all the five components, and the detection limits of five analytes were in the range of 3.6-4.9 nM. The MCE system was validated using two human serum-based control samples containing five analytes.     

Separation of two groups of oestrogen mimicking compounds using micellar electrokinetic chromatography

Two groups of compounds are being investigated due to their reported oestrogen mimicking characteristics in the environment. Separation of phenolic compounds and synthetic oestrogens using micellar electrokinetic chromatography is reported. Photodiode array detection is used for both separations. A standard separation buffer can be used for both groups of compounds including zwitterionic buffer cyclohexylamino-1-propanesulfonic acid, 20 mM at pH 11.5. It was found necessary to include 15% acetonitrile and 25 mM sodium dodecyl sulfate to aid separation and maintain analytes in solution. Optimum separations are achieved using 20 kV with hydrodynamic injection for 5 s. The relative standard deviation (RSD) for reproducibility was investigated for a mixture of phenols and synthetic oestrogens. For these compounds RSD was found to be <0.6% in all cases. Peak efficiencies ranged from 76,000 to 150,000 theoretical plates for different analytes. Application to environmental samples is discussed.     

A new mixed micellar electrokinetic chromatography method for analysis of natural and synthetic anabolic steroids

A simple, rapid and low-costing new mixed surfactant MEKC method has been developed for the analysis of five neutral anabolic steroids in this paper. It was found that the bile salt coupling with Triton X-100 was a suitable bi-micellar surfactant for the separation of these anabolic steroids with similar structure. The separation conditions were optimized in detail. The five natural and synthetic anabolic steroids, such as androstenedione (AD), 19-norandrostenedione (NAD), 1,4-androstadiene-3,17-dione (ADD), methandrostenolone (MA) and methyltestosterone (MT) were separated and detected in an alkaline buffer system (pH 9.0) containing 15 mM Britton-Robinson (BR) buffer, 50 mM sodium cholate (SC) and 0.1% (v/v) Triton X-100 with detection wavelength at 241 nm and 18 kV of separation voltage. Under the optimal conditions, five coexistence neutral steroids were completely separated within 12 min with the detection limits ranged from 0.20 to 0.51 μg/mL. This method was successfully used for detection and confirmation of the anabolic steroid methandrostenolone in methandrostenolone tablets and in the real human urine, GC-MS method was applied to confirm the free methandrostenolone existence in the urine sample in order to validate the reliability of MEKC method.     

Determination of Nonsteroidal Anti‐inflammatory Drugs in Serum by Microchip Capillary Electrophoresis with Electrochemical Detection

A simple and rapid method has been developed for the analysis of four nonsteroidal anti‐inflammatory drugs (NSAIDs) in serum using microchip capillary electrophoresis with pulsed amperometric detection. The selected NSAIDs (salicylic acid, acetaminophen, diflunisal, and diclofenac) are among the most commonly used drugs to treat fever, inflammation, and pain. Used above the therapeutic levels, these drugs can cause a wide variety of adverse effects and their fast analysis could have a significant impact in treatment and recovery of the patients. Several conditions, including separation potential, pH, and concentration of the electrolyte solution were studied to optimize the separation and detection. In this study, salicylic acid, acetaminophen, diflunisal, and diclofenac were separated in less than 2 minutes using a 5 mM borate buffer at pH 11.5 and a separation potential of +1200 V. Linear relationships were obtained between the concentration and peak current in the 0.5–15.3 μg/mL range and detection limits around 0.26 μg/mL. After 30 consecutive injections, the stability of both the response and migration time of the analytes showed relative related deviations of less than 4.6% and 1.0%, respectively. The potential of this method was verified by spiking a bovine serum sample with the four NSAIDs and analyzing the recovery ratio.     

Simultaneous electrochemical and electrochemiluminescence detection for microchip and conventional capillary electrophoresis

A simultaneous electrochemical (EC) and electrochemiluminescence (ECL) detection scheme was introduced to both microchip and conventional capillary electrophoresis (CE). In this dual detection scheme, tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)3(2+)) was used as an ECL reagent as well as a catalyst (in the formation of Ru(bpy)3(3+)) for the EC detection. In the Ru(bpy)3(2+)-ECL process, Ru(bpy)3(3+) was generated and then reacted with analytes resulting in an ECL emission and a great current enhancement in EC detection due to the catalysis of Ru(bpy)3(3+). The current response and ECL signals were monitored simultaneously. In the experiments, dopamine and three kinds of pharmaceuticals, anisodamine, ofloxacin, and lidocaine, were selected to validate this dual detection strategy. Typically, for the EC detection of dopamine with the presence of Ru(bpy)3(2+), a approximately 5 times higher signal-to-noise ratio (S/N) can be achieved than that without Ru(bpy)3(2+), during the simultaneous EC and ECL detection of a mixture of dopamine and lidocaine using CE separation. The results indicated that this dual EC and ECL detection strategy could provide a simple and convenient detection method for analysis of more kinds of analytes in CE separation than the single EC or ECL detection alone, and more information of analytes could be achieved in analytical applications simultaneously.     

Electrochemical detection of phenolic compounds using cylindrical carbon-ink electrodes and microchip capillary electrophoresis

A simple method to fabricate cylindrical carbon electrodes for use in capillary electrophoresis (CE) microchips is described. The electrodes were fabricated using a metallic wire coated with carbon ink. Several experimental variables were studied in order to establish the best conditions to fabricate the electrode. Finally, the electrodes were integrated in a poly(dimethylsiloxane) microchip and used for the analysis of phenolic compounds. Using the optimum conditions, the analysis of a mixture of dopamine, epinephrine, catechol, and 4-aminophenol was achieved in less than 240 s, showing good linear responses (R² = 0.999) in the 0.1-190 μM range, and limits of detection (without the use of stacking or a decoupler) of 140 and 105 nM for dopamine and epinephrine, respectively.     

Separation of six purine bases by capillary electrophoresis with electrochemical detection

Capillary zone electrophoresis with electrochemical detection (ED) has been employed for the separation and determination of adenine (A), guanine (G), theophylline (Thp), hypoxanthine (HX), xanthine (Xan) and uric acid (UA). Effects of several important factors such as the acidity and concentration of running buffer, separation voltage, injection time and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300 μm carbon disc electrode at a working potential of +0.95 V (versus saturated calomel electrode (SCE)). The six purine bases can be well separated within 14 min in a 40 cm length fused-silica capillary at a separation voltage of 10 kV in a 100 mmol/l borate buffer (BB, pH 10.0). The current response was linear over about three orders of magnitude with detection limits (S/N=3) ranging from 0.157×10⁻⁶ to 0.767×10⁻⁶ mol/l for all compounds. The proposed method was successfully applied to determine Thp in tea and aminophylline tablets, UA in human urine, and two purine bases in DNA.     

Apolipoprotein B100 analysis in microchip with electrochemical detection

Apolipoprotein B100(apoB-100) is a major protein of the cholesterol-rich low-density lipoprotein(LDL) and reflects a better assessment of total atherogenic burden to the vascular system than LDL.In this work,a simple and sensitive method has been developed to determine picoliter apoB-100s using the PMMA microfluidic chip coupled with electrochemical detection system. This method performs very well with a detectable linear range of 1-800 pg/mL and a detection limit of 1 pg/mL.A real serum sample has further been detected by this microchip-based biosensor.The results show that this kind of method is practicable and has the potential application in clinical analysis and diagnosis.     

Microchip capillary electrophoresis with electrochemical detector for precolumn enzymatic analysis of glucose, creatinine, uric acid and ascorbic acid in urine and serum

An integrated multiple-enzymatic assay was performed on a (microchip capillary electrophoresis) μCE-EC chip capable of precise intake of sample or reagents in nanoliters. Incorporating multiple-enzyme assay into the μCE chip is relatively new—rendering simultaneous analysis of creatinine and uric acid a snap.Added to the list of merits in this study are the enhanced sensitivity down to 1 μM and a broader spectrum of analytes—inclusive of glucose for the long-time sufferers of diabetes. The performance was orchestrated to attain the claimed level: employing the end-channel electrode mode to tame the noises and the precolumn enzymatic reaction to stabilize the baseline. The 10 μm embedded Pt electrode, deposited at the end of the 30 μm wide separation channel, benefited chip fabrication besides noise reduction. The optimized conditions were 20 mM phosphate buffer (pH 7.5), +1.5 kV separation voltage and +1.0 V detection potential (versus Ag/AgCl). The migration time was repeatable within the deviation of 0.5% R.S.D. (n=7), but the peak currents ranged from 1.5 to 2.2% R.S.D. The detection limits (S/N=3) ranged from 0.71 μM for ascorbic acid to 10 μM for glucose. The calibration curve was linear from 10 to 800 μM (R²>0.995). Glucose, creatinine, uric acid and ascorbic acid as model analytes, in pure form or in serum and urine samples, were tested to verify its feasibility.     

毛细管电泳电化学检测法测定烟草中的多元酚

采用毛细管电泳电化学检测法同时测定了烟草中的多元酚,即芦丁、绿原酸,槲皮素和咖啡酸。考察了工作电极的氧化电位、运行缓冲溶液浓度和pH值,分离电压和进样时间对分离和检测的影响。在优化条件下,以300μm直径的碳圆盘电极为工作电极,检测电位为+0.9 V(vs.SCE),在50 mmol/L硼酸盐(pH 8.4)的运行缓冲液中,被测物浓度与峰电流在三个数量级范围内呈良好线性,检出限为2×10-7或5×10-7g/mL。方法有着良好的重现性,被测组分的迁移时间和峰高的相对标准偏差(RSDs)小于4%(n=7)。单次测定可在16 min内完成,已用于实际样品多元酚的测定,样品处理简单,无须预富集。     

Analysis of ecdysteroids by micellar electrokinetic chromatography with on-line preconcentration

In order to enhance the UV detection sensitivity, an application study of an on-line preconcentration technique for micellar electrokinetic chromatographic (MEKC) was carried out. The simultaneous determination of four test ecdysteroids, 20-hydroxyecdysone, ajugasterone C, polypodine B and ponasterone A has been investigated by using the normal stacking mode in MEKC with UV detection. The effects of anionic surfactant composition and concentration, the applied voltage, the pH buffer, the kind and the amount of organic solvent and the injection time on the analyte resolution were evaluated. The optimised conditions for the separation involved the use of a 50 mM borate as the running buffer containing 50 mM of a mixture of sodium dodecyl sulphate (SDS) and sodium cholate (SC) in the ratio of 1:1 together with a concentration of 10% (v/v) of 2-PrOH at pH 9.0. Hydrodynamic injection of 12 s at 50 mbar and separation voltage of 20 kV at temperature of 20 degrees C were employed. These conditions allowed a repeatability separation within 21 min. Concentration detection limit for the neutral analytes studied improve about an order of magnitude. The method was also applied to the determination of ecdysteroids in a real sample.     

Microchip micellar electrokinetic chromatography separation of alkaloids with UV-absorbance spectral detection

A microchip device is demonstrated for the electrophoretic separation and UV-absorbance spectral detection of four toxic alkaloids: colchicine, aconitine, strychnine, and nicotine. A fused-silica (quartz) microchip containing a simple cross geometry is utilized to perform the separations, and a miniature, fiber-optic CCD spectrometer is coupled to the microchip for detection. Sensitive UV-absorbance detection is achieved via the application of online preconcentration techniques in combination with the quartz microchip substrate which contains an etched bubble-cell for increased pathlength. The miniature CCD spectrometer is configured to detect light between 190 and 645 nm and LabView programming written in-house enables absorbance spectra as well as separations to be monitored from 210 to 400 nm. Consequently, the configuration of this microchip device facilitates qualitative and quantitative separations via simultaneous spatial and spectral resolution of solutes. UV-absorbance limits of quantification for colchicine, 20 microM (8 mg/L); strychnine, 50 microM (17 mg/L); aconitine, 50 microM (32 mg/L); and nicotine, 100 microM (16 mg/L) are demonstrated on the microchip. With the exception of aconitine, these concentrations are > or =20-times more sensitive than lethal dose monitoring requirements. Finally, this device is demonstrated to successfully detect each toxin in water, skim milk, and apple juice samples spiked at sublethal dose concentrations after a simple, SPE procedure.     

微芯片毛细管电泳电化学/电化学发光同时检测药物分子

提出了基于毛细管电泳芯片的电化学和电化学发光同时检测技术.在此芯片系统中,三联吡啶钌Ru(bpy)₃²⁺[Tris(2,2'-bypiridyl) ruthenium(Ⅱ)]既作为电化学发光(ECL)检测所需的发光试剂与被分析物反应,生成激发态的Ru(bpy)₃^2+*,从而产生电化学发光信号;又具有催化作用参与电极表面的电化学反应,从而得到增强的电流响应.电化学信号与电化学发光信号同时产生并被分别纪录,从而实现了电化学和电化学发光的同时检测.这种芯片由两部分构成,分别是带有分离和进样通道的聚二甲基硅氧烷(PDMS)层和ITO(Indium tin oxide)工作电极底片.PDMS层与ITO电极底片采用可逆键合的方式组成芯片,该芯片大大简化了操作过程,提髙了发光信号的采集效率.在整个实验过程中,ITO电极表现出良好的稳定性,可长时间多次使用.选用山莨菪碱和氧氟沙星两种药物分子作为被分析物,对芯片系统性能进行了表征.     

Characterization of etched electrochemical detection for electrophoresis in micron inner diameter capillaries

An enhanced etched electrochemical (EC) detection technique has been developed for CE in micron inner diameter capillaries. The design improvements allow for better alignment between the capillary bore and the electrode. This new method involves utilizing a carbon fiber microelectrode and etching both the carbon fiber and the detection end of a micrometer-sized inner diameter capillary to limit dead volume and analyte diffusion at the amperometric EC detector. To understand the factors affecting enhanced detector efficiency, a detailed examination of the relationship between detector design and performance has been completed by exploring the effects of varying electrode diameter, tip shape, and size, in addition to the etch length of the capillary outlet. The enhanced detection provides peak efficiencies as high as 75000 theoretical plates and estimated detection limits as low as 40 nM for dopamine. This etched detection method should further facilitate volume-limited sample analysis by CE.     

毛细管电泳-电化学检测法测定饲料中的磺胺类药物

采用毛细管电泳-电化学检测法(CE-ED),对饲料中的6种磺胺类药物磺胺脒、磺胺二甲嘧啶、磺胺甲嘧啶、磺胺二甲氧嘧啶、磺胺嘧啶、磺胺甲恶唑进行了分离和测定。分别考察了工作电极电位、运行缓冲液的pH和浓度、分离电压和进样时间等实验参数对实验结果的影响。在优化的实验条件下,以直径300μm的碳圆盘电极为工作电极,检测电位为0.95 V(vs.SCE),在30 mmol/L硼砂-KH2PO4(pH7.6)的运行缓冲溶液中,6个分析物能够在16 min内实现很好的基线分离,被测物浓度与峰电流在3个数量级呈良好的线性,检出限(S/N=3)范围0.08～0.20μg/mL。该方法已应用于实际样品的分析。