CdSe包覆层数对水溶性CdTe/CdSe (II型)核壳量子点的光学特性和微观结构的影响

在水相合成的CdTe量子点的体系中通过分批次加入新鲜配制的NaHSe和CdCl2溶液,制备出了CdSe包覆层数不同的CdTe/CdSe核壳量子点,并着重考察了CdSe包覆层数对CdTe/CdSe核壳量子点的光学特性以及微观结构的影响.与CdTe量子点相比,CdSe单层包覆的CdTe/CdSe核壳量子点的吸收峰和荧光发射峰出现明显红移;随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点吸收光谱的覆盖范围向长波方向扩展,荧光发射峰强度逐步下降,荧光寿命大幅延长,体现出Ⅱ型核壳量子点的特征.X射线衍射(XRD)分析表明,随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点的粉末衍射峰由CdTe衍射峰位置逐步向CdSe衍射峰位置靠近.CdTe/CdSe核壳量子点因其延伸到近红外区域的宽吸收特性致使其在太阳电池领域具有重要的应用前景.     

CdTe/CdSe核壳量子点的合成及其在指纹显现中的应用

以CdCl2和Te粉为原料,在水相中合成了CdTe量子点核;通过外延生长在CdTe量子点核上包覆一层CdSe量子点,得到具有良好荧光性能的CdTe/CdSe核壳量子点;采用X射线衍射仪、透射电镜、高分辨透射电镜分析了不同反应条件下合成的CdTe/CdSe核壳量子点的晶体结构和微观结构,并对其进行了荧光光谱等测试和指纹显现分析.结果表明,合成的CdTe和CdTe/CdSe量子点粒径在3～5nm之间,粒径分布窄,水分散性良好;可以通过控制反应时间和Te/Se比等得到在500～700nm显示荧光发射峰的CdTe/CdSe核壳量子点.此外,核壳CdTe/CdSe量子点可以有效地和指纹物质结合,可应用于对铝合金油潜指纹的鉴别.     

Surface‐State‐Mediated Charge‐Transfer Dynamics in CdTe/CdSe Core–Shell Quantum Dots

Herein, we report the synthesis of aqueous CdTe/CdSe type‐II core–shell quantum dots (QDs) in which 3‐mercaptopropionic acid is used as the capping agent. The CdTe QDs and CdTe/CdSe core–shell QDs are characterized by X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM), steady‐state absorption, and emission spectroscopy. A red shift in the steady‐state absorption and emission bands is observed with increasing CdSe shell thickness over CdTe QDs. The XRD pattern indicates that the peaks are shifted to higher angles after growth of the CdSe shell on the CdTe QDs. HR‐TEM images of both CdTe and CdTe/CdSe QDs indicate that the particles are spherical, with a good shape homogeneity, and that the particle size increases by about 2 nm after shell formation. In the time‐resolved emission studies, we observe that the average emission lifetime (τ_av) increases to 23.5 ns for CdTe/CdSe (for the thickest shell) as compared to CdTe QDs (τ_av=12 ns). The twofold increment in the average emission lifetime indicates an efficient charge separation in type‐II CdTe/CdSe core–shell QDs. Transient absorption studies suggest that both the carrier cooling and the charge‐transfer dynamics are affected by the presence of traps in the CdTe QDs and CdTe/CdSe core–shell QDs. Carrier quenching experiments indicate that hole traps strongly affect the carrier cooling dynamics in CdTe/CdSe core–shell QDs.     

水溶性的高荧光CdTe/CdSeⅡ型核壳量子点的合成与表征

用L-半胱氨酸(L-cysteine)作为稳定剂,以制备的CdTe量子点为核模板,水相合成了具有近红外发光的Ⅱ型核壳CdTe/CdSe半导体量子点。实验考察了合成温度,核模板的尺寸和组分比等因素对合成高质量的CdTe/CdSe量子点的影响。用紫外-可见吸收和荧光光谱研究了合成的量子点的光学性质。在优化的合成条件下,荧光发射光谱在586～753nm范围连续可调,荧光量子产率高达68%;通过X-射线衍射(XRD),X射线光电子能谱(XPS)和透射电镜(TEM)对合成的Ⅱ型核壳CdTe/CdSe量子点进行了结构和形貌表征。     

Chemischer Transport fester Lösungen. 20 [1] Der Chemische Transport von Mischphasen in den Systemen CdS/CdTe und CdSe/CdTe

Chemical Vapor Transport of Solid Solutions. 20, Chemical Vapor Transport of Mixed Phases in the Systems CdS/CdTe and CdSe/CdTe By means of CVT methods using iodine as transport agent (900 → 800 °C) in the systems CdS/CdTe and CdSe/CdTe mixed crystals could be prepared. The system CdS/CdTe shows a broad miscibility gap. Sulfur rich mixed crystals as well as tellurium rich ones could be prepared. The system CdSe/CdTe shows complete miscibility for all Se/Te ratios. In both systems congruent transport has been observed.     

Luminescence 3D-ordered porous materials composed of CdSe and CdTe nanocrystals

The luminescence porous materials of CdTe or CdSe nanocrystals (NCs) were prepared by filling the corresponding NCs into the voids of colloidal crystal by co-deposition of polymer beads and NCs. After removing the beads with tetrahydrofuran (THF), the 3D-ordered porous materials of CdTe (or CdSe) NCs were obtained. The wavelength of maximum photoluminescence of the NCs porous material shows obvious red shift compared with their aqueous dispersion. Under the excitation of high-energy electron the porous materials of CdTe and CdSe NCs will emit photons that can be collected to form a cathode luminescence (CL) image.     

Experimental determination of the absorption cross-section and molar extinction coefficient of CdSe and CdTe nanowires

Absorption cross-sections and corresponding molar extinction coefficients of solution-based CdSe and CdTe nanowires (NWs) are determined. Chemically grown semiconductor NWs are made via a recently developed solution-liquid-solid (SLS) synthesis, employing low melting Au/Bi bimetallic nanoparticle "catalysts" to induce one-dimensional (1D) growth. Resulting wires are highly crystalline and have diameters between 5 and 12 nm as well as lengths exceeding 10 microm. Narrow diameters, below twice the corresponding bulk exciton Bohr radius of each material, place CdSe and CdTe NWs within their respective intermediate to weak confinement regimes. Supporting this are solution linear absorption spectra of NW ensembles showing blue shifts relative to the bulk band gap as well as structure at higher energies. In the case of CdSe, the wires exhibit band edge emission as well as strong absorption/emission polarization anisotropies at the ensemble and single-wire levels. Analogous photocurrent polarization anisotropies have been measured in recently developed CdSe NW photodetectors. To further support fundamental NW optical/electrical studies as well as to promote their use in device applications, experimental absorption cross-sections are determined using correlated transmission electron microscopy, UV/visible extinction spectroscopy, and inductively coupled plasma atomic emission spectroscopy. Measured CdSe NW cross-sections for 1 microm long wires (diameters, 6-42 nm) range from 6.93 x 10(-13) to 3.91 x 10(-11) cm2 at the band edge (692-715 nm, 1.73-1.79 eV) and between 3.38 x 10(-12) and 5.50 x 10(-11) cm2 at 488 nm (2.54 eV). Similar values are obtained for 1 microm long CdTe NWs (diameters, 7.5-11.5 nm) ranging from 4.32 x 10(-13) to 5.10 x 10(-12) cm2 at the band edge (689-752 nm, 1.65-1.80 eV) and between 1.80 x 10(-12) and 1.99 x 10(-11) cm2 at 2.54 eV. These numbers compare well with previous theoretical estimates of CdSe/CdTe NW cross-sections far to the blue of the band edge, having order of magnitude values of 1.0 x 10(-11) cm2 at 488 nm. In all cases, experimental NW absorption cross-sections are 4-5 orders of magnitude larger than those for corresponding colloidal CdSe and CdTe quantum dots. Even when volume differences are accounted for, band edge NW cross-sections are larger by up to a factor of 8. When considered along with their intrinsic polarization sensitivity, obtained NW cross-sections illustrate fundamental and potentially exploitable differences between 0D and 1D materials.     

Room-Temperature Formation Pathway for CdTeSe Alloy Magic-Size Clusters

Little is known about the pathway of room-temperature formation of ternary CdTeSe magic-size clusters (MSCs) obtained by mixing binary CdTe and CdSe induction period samples containing binary precursor compounds (PCs) of MSCs, monomers (Ms), and fragments (Fs). Also, unestablished are dispersion effects that occur when as-mixed samples (without incubation) are placed in toluene (Tol) and octylamine (OTA) mixtures. The resulting ternary MSCs, exhibiting a sharp optical absorption peak at 399 nm, are labelled CdTeSe MSC-399, and their PCs are referred to as CdTeSe PC-399. When the amount of OTA is relatively small, single-ensemble MSC-399 evolved without either binary CdTe or CdSe MSCs. When the OTA amount is relatively large, CdTe MSC-371 appeared initially and then disappeared, while single-ensemble MSC-399 developed more deliberately. The larger the OTA amount, the more slowly these changes proceeded. The substitution reaction of CdTe PC + CdSe M/F↔CdTeSe PC-399 + CdTe M/F is proposed to be rate-determining for the MSC-399 formation in a Tol and OTA mixture. This study provides further understanding of the transformation pathway between MSCs.     

Highly luminescent CdTe/CdSe colloidal heteronanocrystals with temperature-dependent emission color

In this work we present the preparation of highly luminescent anisotropic CdTe/CdSe colloidal heteronanocrystals. The reaction conditions used (low temperature, slow precursor addition, and surfactant composition) resulted in a tunable shape from prolate to branched CdTe/CdSe nanocrystals. Upon CdSe shell growth the heteronanocrystals show a gradual evolution from type-I to type-II optical behavior. These heteronanocrystals show a remarkably high photoluminescence quantum yield (up to 82%) and negligible thermally induced quenching up to temperatures as high as 373 K.     

Spectroscopy and femtosecond dynamics of type-II CdTe/CdSe core-shell quantum dots.

Syntheses of CdTe/CdSe type-II quantum dots (QDs) using CdO and CdCl2 as precursors for core and shell, respectively, are reported. Characterization was made via near-IR interband emission, transmission electron microscopy (TEM), energy dispersive spectroscopy (EDX), and X-ray diffraction (XRD). Femtosecond fluorescence upconversion measurements on the relaxation dynamics of the CdTe core (in CdTe/CdSe) emission and CdTe/CdSe interband emission reveal that as the size of the core increases from 5.3, 6.1 to 6.9 nm, the rate of photoinduced electron separation decreases from 1.96, 1.44 to 1.07 x10(12) s(-1). The finite rates of the initial charge separation are tentatively rationalized by the small electron-phonon coupling, causing weak coupling between the initial and charge-separated states.     

Super Sensitization: Grand Charge (Hole/Electron) Separation in ATC Dye Sensitized CdSe,CdSe/ZnS Type‐I,and CdSe/CdTe Type‐II Core–Shell Quantum Dots

Ultrafast charge‐transfer dynamics has been demonstrated in CdSe quantum dots (QD), CdSe/ZnS type‐I core–shell, and CdSe/CdTe type‐II core–shell nanocrystals after sensitizing the QD materials by aurin tricarboxylic acid (ATC), in which CdSe QD and ATC form a charge‐transfer complex. Energy level diagrams suggest that the conduction and valence band of CdSe lies below the LUMO and the HOMO level of ATC, respectively, thus signifying that the photoexcited hole in CdSe can be transferred to ATC and that photoexcited ATC can inject electrons into CdSe QD, which has been confirmed by steady state and time‐resolved luminescence studies and also by femtosecond time‐resolved absorption measurements. The effect of shell materials (for both type‐I and type‐II) on charge‐transfer processes has been demonstrated. Electron injection in all the systems were measured to be <150 fs. However, the hole transfer time varied from 900 fs to 6 ps depending on the type of materials. The hole‐transfer process was found to be most efficient in CdSe QD. On the other hand, it has been found to be facilitated in CdSe/CdTe type‐II and retarded in CdSe/ZnS type‐I core–shell materials. Interestingly, electron injection from photoexcited ATC to both CdSe/CdTe type‐II and CdSe/ZnS type‐I core–shell has been found to be more efficient as compared to pure CdSe QD. Our observation suggests the potential of quantum dot core–shell super sensitizers for developing more efficient quantum dot solar cells.     

Surface properties of semiconductor analogs of CdB<Superscript>VI</Superscript> and their solid substitution solutions

The physicochemical (acidic-basic, adsorption, and electrophysical) surface properties of binary semiconductor analogs of CdB^VI (CdTe, CdSe, and CdS), and (CdTe)_x(CdSe)_1–x, and (CdTe)_x(CdS)_1–x solid substitution solutions were studied using modern methods and equipment. The nature of the active centers and the mechanisms of acidic-basic, adsorption (involving СО), and electronic interactions, interrelated tendencies in variation of the surface properties under study, and their correlations with the known bulk physicochemical properties were elucidated; the property–composition diagrams were constructed, which were used to reveal the most active adsorbents suggested for use as materials for СО (carbon monoxide) microimpurity sensors.     

Room‐Temperature Formation Pathway for CdTeSe Alloy Magic‐Size Clusters

Little is known about the pathway of room‐temperature formation of ternary CdTeSe magic‐size clusters (MSCs) obtained by mixing binary CdTe and CdSe induction period samples containing binary precursor compounds (PCs) of MSCs, monomers (Ms), and fragments (Fs). Also, unestablished are dispersion effects that occur when as‐mixed samples (without incubation) are placed in toluene (Tol) and octylamine (OTA) mixtures. The resulting ternary MSCs, exhibiting a sharp optical absorption peak at 399 nm, are labelled CdTeSe MSC‐399, and their PCs are referred to as CdTeSe PC‐399. When the amount of OTA is relatively small, single‐ensemble MSC‐399 evolved without either binary CdTe or CdSe MSCs. When the OTA amount is relatively large, CdTe MSC‐371 appeared initially and then disappeared, while single‐ensemble MSC‐399 developed more deliberately. The larger the OTA amount, the more slowly these changes proceeded. The substitution reaction of CdTe PC + CdSe M/F?CdTeSe PC‐399 + CdTe M/F is proposed to be rate‐determining for the MSC‐399 formation in a Tol and OTA mixture. This study provides further understanding of the transformation pathway between MSCs.     

基于CdSe-CdTe量子点能量转移荧光猝灭法测定前列腺抗原

研究了CdSe-CdTe量子点间发生的荧光共振能量转移,并用于荧光猝灭法测定超痕量前列腺抗原(PSA)。在pH 8.0的Tris-HCl缓冲溶液中,CdSe-CdTe间发生有效能量转移,使CdTe荧光大大增强。PSA抗原与CdTe标记的PSA抗体发生特异性反应,使能量转移体系的CdTe上的荧光强度降低,即发生猝灭。建立了CdSe-CdTe能量转移荧光猝灭法测定PSA抗原的方法。在优化的实验条件下,PSA抗原的线性范围为0.28～10μg/L,相关系数r=0.9992,检出限达1.5×10-2μg/L(n=11)。     

Stabilization of the thermodynamically favored polymorph of cadmium chalcogenide nanoparticles CdX (X = S, Se, Te) in the polar mesopores of SBA-15 silica

A versatile synthetic approach to cadmium chalcogenide nanoparticles in the mesopores of SBA-15 silica as a host matrix was developed. The use of cadmium organochalcogenolates of the type Cd(XPh)(2).TMEDA (X = S, Se, Te) allowed the preparation of nanoparticles of all three cadmium chalcogenides following the same experimental protocol. Particles of CdS, CdSe, and CdTe with a particle size of 7 nm were prepared from this class of single-source precursors. The incorporation of the precursor molecules into the pores was achieved by melt infiltration at a temperature of 140 degrees C. Subsequent pyrolysis of the precursors in the mesopores yielded the semiconductor particles. Owing to the high polarity of the silanol-covered pore walls, which lower the surface energy of the particles to a large extent, the dimorphic cadmium chalcogenides are obtained in their thermodynamically favored modifications; e.g., CdS particles crystallize in the wurtzite type, CdTe particles are obtained in the zinc blende structure, and CdSe (where no unambiguous preference exists) crystallizes as a "mixture" of both structures with a rather random stacking sequence.     

Aqueous synthesis of glutathione-capped CdTe/CdS/ZnS and CdTe/CdSe/ZnS core/shell/shell nanocrystal heterostructures

Here we demonstrate the aqueous synthesis of colloidal nanocrystal heterostructures consisting of the CdTe core encapsulated by CdS/ZnS or CdSe/ZnS shells using glutathione (GSH), a tripeptide, as the capping ligand. The inner CdTe/CdS and CdTe/CdSe heterostructures have type-I, quasi-type-II, or type-II band offsets depending on the core size and shell thickness, and the outer CdS/ZnS and CdSe/ZnS structures have type-I band offsets. The emission maxima of the assembled heterostructures were found to be dependent on the CdTe core size, with a wider range of spectral tunability observed for the smaller cores. Because of encapsulation effects, the formation of successive shells resulted in a considerable increase in the photoluminescence quantum yield; however, identifying optimal shell thicknesses was required to achieve the maximum quantum yield. Photoluminescence lifetime measurements revealed that the decrease in the quantum yield of thick-shell nanocrystals was caused by a substantial decrease in the radiative rate constant. By tuning the diameter of the core and the thickness of each shell, a broad range of high quantum yield (up to 45%) nanocrystal heterostructures with emission ranging from visible to NIR wavelengths (500-730 nm) were obtained. This versatile route to engineering the optical properties of nanocrystal heterostructures will provide new opportunities for applications in bioimaging and biolabeling.     

Long-term exposure to CdTe quantum dots causes functional impairments in live cells

Several studies suggested that the cytotoxic effects of quantum dots (QDs) may be mediated by cadmium ions (Cd2+) released from the QDs cores. The objective of this work was to assess the intracellular Cd2+ concentration in human breast cancer MCF-7 cells treated with cadmium telluride (CdTe) and core/shell cadmium selenide/zinc sulfide (CdSe/ZnS) nanoparticles capped with mercaptopropionic acid (MPA), cysteamine (Cys), or N-acetylcysteine (NAC) conjugated to cysteamine. The Cd2+ concentration determined by a Cd2+-specific cellular assay was below the assay detection limit (<5 nM) in cells treated with CdSe/ZnS QDs, while in cells incubated with CdTe QDs, it ranged from approximately 30 to 150 nM, depending on the capping molecule. A cell viability assay revealed that CdSe/ZnS QDs were nontoxic, whereas the CdTe QDs were cytotoxic. However, for the various CdTe QD samples, there was no dose-dependent correlation between cell viability and intracellular [Cd2+], implying that their cytotoxicity cannot be attributed solely to the toxic effect of free Cd2+. Confocal laser scanning microscopy of CdTe QDs-treated cells imaged with organelle-specific dyes revealed significant lysosomal damage attributable to the presence of Cd2+ and of reactive oxygen species (ROS), which can be formed via Cd2+-specific cellular pathways and/or via CdTe-triggered photoxidative processes involving singlet oxygen or electron transfer from excited QDs to oxygen. In summary, CdTe QDs induce cell death via mechanisms involving both Cd2+ and ROS accompanied by lysosomal enlargement and intracellular redistribution.     

Tin Domain Growth on Quasi-Two-Dimensional CdTe and CdSe Nanoparticles

Tin domain growth on quasi-two-dimensional colloidal CdSe and CdTe nanoparticles having the zinc blende structure has been studied. The initial quasi-two-dimensional CdSe and CdTe nanoparticles having lateral sizes of 100–200 nm were prepared by a colloidal method. Tin domain growth was accomplished in tetrahydrofuran via the reduction of a tin(II) salt by tetrabutylammonium borohydride. The tin domains had sizes of 10–20 nm as probed by TEM. In case of CdSe nanoparticles, tin domains were grown inside the inner cavities of initially rolled nanoparticles. A β-tin phase was identified by X-ray diffraction. The absorption spectra featured the broadening of exciton bands corresponding to quasi-two-dimensional nanoparticles, the spectral positions of absorption peaks remaining almost unchanged.     

Aqueous synthesis of type-II core/shell CdTe/CdSe quantum dots for near-infrared fluorescent sensing of copper(II)

Type-II core/shell CdTe/CdSe quantum dots (QDs) were synthesized in aqueous medium by employing thiol-capped CdTe QDs as core template and CdCl(2) and Na(2)SeSO(3) as shell precursors, respectively. Compared with the original CdTe cores, the core/shell CdTe/CdSe QDs showed an obvious red-shifted emission with the color-tune capability to the near-infrared (NIR) wavelength, because of the formation of an indirect excitation. The prepared QDs exhibited high stability and moderate fluorescence quantum yields (10-20%), and their core/shell heterostructure was characterized by UV-vis absorption, steady-state and time-resolved fluorescence spectra, X-ray powder diffraction, X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy. The fluorescence of the core/shell QDs could be markedly quenched by Cu(II), and approximate concentrations of other physiologically important cations, such as Zn(II), Ca(II), Na(I) and K(I) etc., had no effect on the fluorescence. Based on this, a simple and rapid method for Cu(II) determination was proposed using the NIR CdTe/CdSe QDs as fluorescent probes. Under optimal conditions, the response was linearly proportional to the concentration of Cu(II) between 0.05 to 50.0 x 10(-6) mol L(-1), the limit of detection was 2.0 x 10(-8) mol L(-1). The developed method was successfully applied to the detection of trace Cu(II) in real samples.     

Aqueous synthesis of CdTe nanocrystals: progresses and perspectives

As an alternative choice to CdSe nanocrystals synthesized in organic phase, CdTe nanocrystals synthesized in aqueous solution, have attracted increasing research interests in recent years. This feature article summarizes the aqueous solution-based syntheses, some optoelectronic applications, and bioapplications of CdTe nanocrystals, with emphasis on the recent progresses in related fields.