Polyethylenes bearing a terminal porphyrin group

An α-[Cu(II)-porphyrin]-polyethylene was synthesized for the first time using copper catalyzed 1,3-dipolar azide-alkyne Huisgen cycloaddition yielding highly colored moiety-substituted polyethylene.     

Synthesis and cellular uptake of cell delivering PNA-peptide conjugates

The synthesis and cellular uptake of fluorescently labelled PNA-peptide conjugates is described; Dde/Mmt protected PNA monomers, fully orthogonal to Fmoc chemistry, were used to develop a flexible strategy to give Peptide Nucleic Acids conjugated to tri- and hepta-arginine and the short basic Tat(48-57) peptide as examples of cellular penetrating peptides, thereby allowing efficient cellular delivery of PNA into cells.     

Synthesis and cellular uptake of porphyrin decorated iron oxide nanoparticles-a potential candidate for bimodal anticancer therapy

This paper reports the synthesis, characterization, and cellular uptake of the conjugate of porphyrin and iron oxide nanoparticles, which may lead to a bimodal anticancer agent that can be used in the combinational treatment of photodynamic therapy (PDT) and hyperthermia therapy (HT).     

Prednisolone succinate-glucosamine conjugate: Synthesis, characterization and in vitro cellular uptake by kidney cell lines

Prednisolone succinate-glucosamine(PSG) conjugate,a prodrug for prednisolone,was synthesized and confirmed by NMR and MS spectrum.The stabilities of the prodrug in PBS(pH 2.50,5.00,7.20,and 7.89) were studied.Cytotoxicity and uptake assay of the prodrug were perfomed on HK-2 and MDCK cell lines.The results showed that compared with prednisolone,the PSG not only did not increase the cytotoxicity but also improved the uptake to 2.2 times of prednisolone by the cells.Thus,it indicated that glucosamine might be a potential carrier for kidney-targeting delivery of prednisolone.     

Novel unsymmetrical squaraine dye bearing cyanoacrylic acid anchoring group and its photosensitization behavior

Aiming toward the development of far-red sensitive organic dyes, unsymmetrical squaraine dye bearing direct cyanoacrylate functionalized indole ring has been synthesized and characterized along with its utilization as photosensitizer for dye-sensitized solar cells. Upon dye-sensitized solar cell fabrication, this sensitizer exhibits its potentiality as a good far-red sensitive dye having photoconversion efficiency of 5.03% under the simulated solar irradiation at AM 1.5 conditions. This opens up further possibility to design efficient far-red sensitive dyes by judicious implementation of suitable donor moieties with extended π-conjugation.     

Synthesis and properties of polyfluorene copolymers bearing thiophene and porphyrin

To search for more wider absorption and higher charge carriers mobilities materials of polymer solar cell, a series of soluble alternating polyfluorene copolymers were synthesized by palladium-catalyzed Suzuki coupling reaction. Their structures were determined by 1H NMR, IR and UV-vis. And their UV-vis absorption spectra indicated that they had strong absorption over 600 nm spectral range and nearly cover 400-700 nm visible region. The band gaps of copolymers calculated according to cyclic voltammetry （CV） were between 1.96 and 2.03 eV. Polymer：TiO2 bulk-heterojunction films were made from mixtures of polymer and titanium isopropoxide, a precursor for TiO2, via hydrolysis in air overnight. The photoluminescence at 380-800 nm of the blend film of PT-TPP20 （5 mg/mL）：Ti（OC3H7）4 （80 μL/mL） （20% volume fraction） was significantly quenched in the 50% Ti（OC3H7）4 blend film, indicating that rapid and efficient separation of photoinduced electron-hole pairs.     

On the correlation between hydrophobicity, liposome binding and cellular uptake of porphyrin sensitizers

A crucial factor in choosing a porphyrin or analogous photosensitizer for photodynamic therapy (PDT) is its ability to incorporate into the cells. For hydrophobic compounds that partition passively into the cytoplasmic membrane, a partition coefficient between an organic solvent and water, P, is one factor that could be used to predict the molecule's ability to diffuse into biomembranes. We synthesized several porphyrins, modified with two, three or four meso-substituents and studied their spectroscopic and photophysical properties. The octanol-water partitioning coefficients, log P, were calculated as a parameter for hydrophobicity. We found these porphyrins to be very hydrophobic, with log P values in the range of 8.9-11.8. These were correlated with the binding constants of these porphyrins into liposomes, K(b), as well as to their uptake by cells. The correlation between the estimated log P and K(b) is nearly linear but negative, indicating, apparently, that there is lesser binding to liposomes with increased hydrophobicity. On the other hand, all of the studied porphyrins are taken up by cells, but there is no clear correlation between cellular uptake and the log P or K(b). Lipinski's pharmacological "rule of 5" predicts poor permeation of drugs into cells when log P is greater than five. This may be relevant for diffusional binding to liposomes, where aqueous aggregation can interfere strongly with cellular uptake. In such extreme conditions, neither liposome binding nor other rules seem to predict porphyrin behavior in vitro.     

Synthesis and properties of microgel bearing a mercapto group

Vinylbenzyl S-thioacetate ( 1 ) was prepared from thioacetic acid and chloromethylstyrene. Although bulk polymerization of 1 afforded a crosslinked polymer, solution polymerization in chlorobenzene afforded a corresponding soluble polymer. The S-thioacetate group did not react during the radical polymerization of 1 . Bulk copolymerization of 1 with styrene afforded a soluble copolymer when the feed ratio of 1 was lower than 30 mol %. Soap-free emulsion copolymerization of 1 , St, divinylbenzene, and 2-hydroxyethyl methacrylate (66 : 28 : 1 : 5) was carried out in water using 2,2′-azobis (N,N′-dimethyleneisobutyramidine) dichloride as an initiator to afford uniform spherical microgel 2 , whose average diameter was 135 nm. Aminolysis of 2 with an excess amount of butylamine in the presence of sodium tetrahydridoborate followed by treatment with hydrochloric acid resulted in complete removal of the acetyl group to give a slightly distorted spherical microgel (MG-SH) bearing mercapto group. The average diameter of MG-SH was 165 nm. Trans-esterification of p-nitrophenyl acetate ( 3 ) in the presence of triethylamine was efficiently accelerated by the addition of MG-SH. The radical polymerization of methyl methacrylate (MMA) in the presence of suspended MG-SH in chlorobenzene afforded the MMA-grafted microgel. Although MG-SH is a crosslinked gel, it acts as a soluble polymer bearing mercapto group. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1443–1451, 1997     

Synthesis and self-assembling behavior of a porphyrin bearing multiple meso-conjugated barbiturates

An efficient procedure through deprotection of 2,4,6-trimethoxypyrimidine derivative afforded porphyrinato zinc bearing multi-barbiturates acting as multiple hydrogen bonding sites at the meso positions. Addition of excess amphiphilic triaminopyrimidine derivative, as a complementary motif to the barbiturate, in an aqueous solution of porphyrin conjugated with multiple barbiturates at the meso positions resulted in precipitation. The cast film from the chloroform solution of the precipitate indicated the formation of a well-defined porphyrin assembly.     

Synthesis,thermal stability,and computed bond dissociation energies of tetraarylphosphonium-based mesothermal ionic liquids bearing a quinoline ring system

Seven new ionic liquids have been prepared which contain tetraarylphosphonium cations in which one of the aromatic groups is a quinoline ring. These compounds, which differ from each other in the point of attachment of the quinoline to the phosphorous core, were evaluated by DSC and TGA, then screened for thermal stability for 96?h at temperatures up to 300?°C. The observed thermal stabilities of the salts were found to be sensitive to the position of quinoline ring substitution, and correlated well with computed homolytic bond dissociation energies of the quinoline-P bonds.     

Synthesis, characterization, and cellular uptake of DNA-binding rose bengal peptidoconjugates

Peptide conjugates of the xanthene dye rose bengal (RB) are described featuring sequences that promote DNA binding. The complexation of these conjugates with DNA causes efficient quenching of the fluorophore singlet state and suppresses singlet oxygen production. When incubated with human cells, the RB conjugates pass through the cell membrane but are not visualized in the nucleus. This behavior is in stark contrast to that exhibited by structurally analogous conjugates containing the unhalogenated xanthene dye fluorescein. These results highlight the marked sensitivity of cell permeability characteristics to subtle structural differences.     

Palladium-catalyzed regioselective introduction of chalcogen moieties into porphyrin bearing an ethynyl group

In the field of materials science, π-conjugated molecules bearing a group 16 heteroatom are of great importance. Sulfur or selenium containing porphyrins were successfully synthesized using the transition-metal-catalyzed reaction with diphenyl dichalcogenides. NMR studies indicated the preferential formation of the (Z)-isomer.     

Synthesis and photophysical characterization of porphyrin, chlorin and bacteriochlorin molecules bearing tethers for surface attachment

The ability to tailor synthetic porphyrin, chlorin and bacteriochlorin molecules holds promise for diverse studies in artificial photosynthesis. Toward this goal, the synthesis and photophysical characterization of five tetrapyrrole compounds is described. Each compound bears a surface attachment group. One set contains three meso-substituted porphyrins that differ only in the nature of a surface-binding tether-isophthalic acid, ethynylisophthalic acid or cyanoacrylic acid. The other set includes a porphyrin, chlorin and bacteriochlorin each of which bears an ethynylisophthalic acid tether. The ester derivative of each compound was prepared for solution photophysical characterization studies. The photophysical studies include determination (in toluene or acetonitrile) of the electronic absorption and fluorescence spectra, fluorescence yield and lifetime of the lowest excited singlet state. The excited-state lifetimes range from 1 to 5.6 ns for the five compounds. The radiative rate constant for the excited-state decay was estimated from the photophysical data (fluorescence yield and excited-state lifetime) and from Strickler-Berg analysis of the absorption and fluorescence spectra. The synthesis and characterization of the tetrapyrrole compounds underpin their use as sensitizers in molecular-based solar cells.     

Effective cell uptake of nanoassemblies of a fluorescent amphiphilic cyclodextrin and an anionic porphyrin

An emitting nanoassembly composed of a novel amphiphilic cyclodextrin functionalised with a covalently appended fluorophore and an anionic porphyrin internalizes effectively in tumor cells, allowing simultaneously the detection of carrier and photosensitiser.     

Synthesis and cellular uptake of cell delivering 2,6-pyridinediylbisalkanamide submicron-sized sheets in hela cells

2,6-Pyridinediylbisalkanamides were synthesized, using diaminopyridine (DAP) as a linker and alkyl chains of varying lengths, that upon self-assembly form submicron-sized sheets and their uptake into the cytoplasm of HeLa cells was studied by confocal microscopy.     

Synthesis and photophysical properties of light-harvesting arrays comprised of a porphyrin bearing multiple perylene-monoimide accessory pigments

We present the synthesis and characterization of new light-harvesting arrays containing two, four, or eight perylene-monoimide accessory pigments attached to a zinc porphyrin. Each perylene is substituted with one or three 4-tert-butylphenoxy substituents. A 4,3'- or 4,2'-diarylethyne linker joins the perylene N-imide position and the porphyrin meso-position, affording divergent or convergent architectures, respectively. The architectures are designed to provide high solubility in organic media and facile perylene-to-porphyrin energy transfer, while avoiding charge-transfer quenching of the excited porphyrin product. For the array containing four perylenes per porphyrin in both nonpolar (toluene) and polar (benzonitrile) media and for the array containing eight perylenes per porphyrin in toluene, the photoexcited perylene-monoimide dye (PMI) decays rapidly ( approximately 3.5 ps) and predominantly (>or=90%) by energy transfer to the zinc porphyrin to form the excited zinc porphyrin (Zn), which has excited-state characteristics (lifetime, fluorescence yield) comparable (within approximately 10%) to those of the isolated chromophore. For the array containing eight perylenes in benzonitrile, PMI decays approximately 80% by energy transfer (forming Zn) and approximately 20% by hole transfer (forming PMI- Zn+); Zn subsequently decays approximately 20% by electron transfer (also forming PMI- Zn+) and approximately 80% by the normal routes open to the porphyrin monomer (intersystem crossing, internal conversion, fluorescence). In addition to rapid and efficient perylene-to-porphyrin energy transfer, the broad blue-green to yellow absorption of the perylene dyes complements the blue absorption of the porphyrin, resulting in excellent light harvesting across a significant spectral region. Collectively, the work described herein identifies multiperylene-porphyrin arrays that exhibit suitable photochemical properties for use as motifs in larger light-harvesting systems.     

Synthesis and polymerization of chiral methacrylates bearing a cholesteryl or menthyl group

Chiral methacrylates, that is, cholesteryl (ChMOC) and l‐menthyl (MnMOC) N‐(2‐methacryloyloxyethyl)carbamates, were synthesized from 2‐methacryloyloxyethyl isocyanate and cholesterol and l‐menthol, respectively. Radical polymerizations of ChMOC and MnMOC gave number‐average molecular weights for poly(ChMOC) and poly(MnMOC) of up to 3.74 × 10⁴ and 9.39 × 10⁴, respectively, and the specific rotations ([α]) were −43.1° to −47.7° and −87.6° to −89.0°, respectively. Temperature dependence of the specific optical rotation was observed for poly(ChMOC) but not for poly(MnMOC). The hydrogen bonds based on urethane segments for poly(ChMOC) were stronger than those for poly(MnMOC) according to IR spectra. In addition, the chiroptical properties of poly(ChMOC) were slightly affected by temperature in the presence of trifluoroacetic acid acting as an inhibitor for the formation of hydrogen bonds. Therefore, poly(ChMOC) may have a regular conformation due to hydrogen bonds and interaction between cholesteryl groups. Radical copolymerizations of ChMOC with styrene, methyl methacrylate, N‐cyclohexylmaleimide, and N‐phenylmaleimide were performed with 2,2′‐azobisisobutyronitrile in tetrahydrofuran at 60 °C. Monomer reactivity ratios and Alfrey–Price Q–e were determined. Chiroptical properties of the copolymers were influenced by co‐units. Thermal and X‐ray diffraction analyses were performed for the homopolymers and copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4315–4325, 2000     

Morphological families of self-assembled porphyrin structures and their photosensitization of hydrogen generation

Varying the solution growth conditions of cooperative binary ionic solids composed of anionic and cationic metalloporphyrins produces a series of families of self-assembled structures that efficiently and durably photosensitize the evolution of hydrogen.     

Structure and photoelectric properties of LB films of porphyrin bearing pyridinium with long-chain alkyl group

Ｉｎｒｅｃｅｎｔｙｅａｒｓ,ｔｈｅｓｔｕｄｙｏｎｔｈｅｃｏｎｖｅｒｓｉｏｎａｎｄａｐｐｌｉｃａｔｉｏｎｏｆｓｏｌａｒｅｎｅｒｇｙｈａｓｂｅｅｎｏｎｅｏｆｔｈｅｍｏｓｔａｃｔｉｖｅａｓｐｅｃｔｓｉｎｔｈｅｆｉｅｌｄｓｏｆｎｅｗｅｎｅｒｇｅｔｉｃｓｏｕｒｃｅｄｅｖｅｌｏｐｍｅｎｔ,ｔｈｅｆａｂｒｉｃａｔｉｏｎｏｆｎｏｖｅｌｓｏｌａｒｅｎｅｒｇｙｃｅｌｌｓｂｅｃｏｍｅｓｔｈｅｇｏａｌｏｆｐｅｏｐｌｅ’ｓｅｆｆｏｒｔｓ.Ｉｎｏｒｇａｎｉｃｓｅｍｉｃｏｎｄｕｃｔｉｖｅｓｏｌａｒｅｎｅｒｇｙｃｅｌｌｓｈａｖｅ…