树枝形大分子/环氧树脂体系固化反应动力学研究

用示差扫描量热仪(DSC)对树枝形大分子PAMAM/双酚-A型环氧树脂体系的固化反应动力学过程进行了分析。通过Kissinger法求得体系固化反应的表观活化能ΔE为59.78kJ/mol,通过Crane法求得体系的固化反应级数n=0.91,并计算出了反应速率常数k和不同升温速率下的频率因子A。根据动态DSC数据确定体系合适的固化反应温度为80~90℃,后固化温度为140℃。     

含联苯结构环氧树脂体系固化反应动力学研究

用示差扫描量热仪(DSC)对含联苯结构环氧树脂(TMBP)/4,4′-二氨基二苯砜(DDS)固化体系的固化反应过程进行了分析,并用Kissinger和Ozawa方法分别求得体系固化反应的表观活化能ΔE为69.7和74.2kJ/mol,根据Crane理论计算得到该体系的固化反应级数n=0.89及在不同升温速率下的频率因子A,确定了使用DDS作为固化剂的固化反应条件.     

一种新型液晶环氧树脂的合成表征与固化研究

首次合成了一种不对称联苯和芳香酯型液晶环氧树脂4"-环氧丙氧基苯甲酸-4-环氧丙氧基联苯-4'-酯(EBEPC),利用FT-IR、1H NMR、DSC和POM对其结构和性能进行了表征.结果表明,EBEPC在190℃时可形成明显的向列相液晶.对其同普通固化剂DDM体系的固化反应过程、固化动力学进行了研究,与普通环氧树脂E-51/DDM体系比较,液晶环氧树脂EBEPC体系具有较低的固化反应温度,且表观话化能Ea(54.5kJ/mol)较E-51/DDM体系(60.7kJ/mol)低,EBEPC体系具有更高的反应活性.     

聚酯型扩链脲改性环氧树脂E-51/DDS体系反应活性研究

提高二氨基二苯砜(DDS)固化环氧树脂体系的反应活性,降低反应温度、提高反应速率,具有重要的研究意义和实用价值.本研究以聚酯(PEGA1000,2000,PNGA1000,2000)、甲苯-2,4-二异氰酸酯(TDI)、二甲胺为原料合成了含有聚酯型柔性间隔基的扩链脲U-PEGA1000,2000,U-PNGA1000,2000,用其改性环氧树脂E-51/DDS体系,采用DSC系统考察了改性体系的固化反应活性.结果表明,改性体系固化反应活性明显提高,固化反应表现活化能降低,固化反应峰顶温度从230℃降至170℃,固化反应的表观活化能由67.74kJ/mol降至47.80kJ/mol.     

含苯并噁唑环氧树脂的合成、固化动力学及热性能

通过两步法制备了两种含苯并噁唑结构的环氧树脂双苯并二噁唑型环氧(DAROH-O)树脂与双酚A型苯并噁唑环氧(HOH-O)树脂,采用红外光谱和氢核磁共振波谱分析对树脂的结构进行了表征。结果表明:当以二氨基二苯基甲烷(DDM)为固化剂时,对于DAROH-O/DDM体系,采用Kissinger法和Ozawa法计算得到的表观反应活化能分别为176.92kJ/mol和175.36kJ/mol;对于HOH-O/DDM体系,采用Kissinger法和Ozawa法计算得到的表观反应活化能分别为198.45kJ/mol和196.15kJ/mol。热重分析结果表明这两种环氧树脂固化物的耐热性能均远高于普通双酚A环氧树脂/DDM固化物的耐热性能。固化物的失重过程包括两个阶段,第一阶段的分解出现在350～370℃,第二阶段的分解发生在600℃左右,属于苯并噁唑环的分解。     

氢化双酚A型环氧树脂的固化动力学

将氢化双酚A与环氧氯丙烷反应合成了氢化双酚A型环氧树脂(HBPA-EP),产物分别用多元胺类或酸酐类固化剂固化,利用差示扫描量热分析(DSC)对固化反应特性进行了研究,得到了相应的固化条件、固化反应活化能和固化反应动力学方程等.结果表明,当分别采用1,3-环己二甲胺、液态聚酰胺、顺式六氢苯酐、甲基六氢苯酐固化HBPA-EP(环氧值为0.45)时,其固化条件分别为100℃、2h,145℃、4h,90℃、2h,120℃、4h,130℃、2h,150℃、4h,140℃、2h和160℃、4h,用这4种固化剂进行固化反应的表观活化能分别为50.62、56.88、74.56 kJ/mol和68.36 kJ/mol,其反应级数分别为0.886、0.901、0.915和0.905.     

松香改性酚醛环氧树脂的固化反应动力学研究

以自制的松香改性酚醛环氧树脂（RPAE）为对象,采用差示扫描量热法研究了其与4,4．二氨基二苯砜组成的体系（RPAE／DDS）的固化动力学,利用Kissinger方程计算得到体系的固化热约为109．29J／g,表观活化能为51．56kJ／mol,该体系反应级数为0．85,近似为1级反应,反应速率常数为2．69×10^4／s。采用Ozawa-Flynn-Wall方程分析,得到体系的表观活化能为70。1kJ／mol。     

2,4,6-三(羟基苯甲基氨基)-均三嗪的合成及其与双酚A型环氧树脂的固化行为研究

合成了一种含三嗪环结构的环氧树脂固化剂2,4,6-三(羟基苯甲基氨基)-均三嗪(MFP).用动态DSC和原位红外光谱对MFP/DGEBA(双酚A型环氧树脂)体系的固化行为进行了研究.动态DSC研究表明,由于MFP分子结构中存在两种活泼氢(酚羟基氢和仲胺氢),固化反应存在明显的两个峰,相对应的表观活化能分别为70.5 kJ.mol-1和86.5 kJ.mol-1(Kissinger法),通过与另一相似化合物固化DGEBA的比较可知,在MFP固化DGEBA的过程中,酚羟基与环氧基反应相对较难.原位红外动力学结果很好地支持了上述结论.     

耐热芴型环氧树脂的非等温固化动力学

合成了9,9’-二[4-(2,3环氧丙氧基)苯基]芴,并以4,4’-二氨基二苯砜胺为固化剂,用非等温DSC法研究了其固化动力学,用Flynn-Wall-Ozawa法和Friedman法确定了固化动力学参数,用动力学模拟推测了固化机理函数,并用TGA法对等温固化树脂的耐热性进行了表征。结果表明:双酚芴环氧固化反应的表观活化能约63.86 kJ/mol,扩散因子为3.80×104s-1,反应级数为1.57;固化反应为枝状成核的自催化反应;等温固化后的环氧树脂于400℃开始分解,700℃时残碳率为41.73%。     

咪唑固化不同类型环氧树脂的固化特征、固化动力学及其反应活性

以咪唑为固化剂,对缩水甘油醚型、缩水甘油酯型环氧树脂(简称链型环氧树脂)及脂环环氧树脂的固化特征、固化动力学及反应活性进行了研究.DSC实验结果表明,固化过程均分两阶段进行,链型环氧树脂固化反应表观活化能低于脂环环氧树脂.各树脂第一阶段的表观反应活化能均低于第二阶段活化能.当脂环环氧树脂中混入不同比例的链型环氧树脂后,固化反应速率均较脂环环氧树脂单独固化时快,当链型环氧树脂量大于50％时,更为明显.     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Oxygen defect K2NiF4-type oxides: The compounds La2−xSrxCuO4−x2+δ

Oxygen defect K₂NiF₄-type oxides $\text{La}{}_{\mathrm{2?x}}\text{Sr}{}_{\mathrm{x}}\text{CuO}{}_{\mathrm{<mtext>4?</mtext><mtext>x</mtext><mtext>2</mtext><mtext>+\delta </mtext>}}$ have been synthesized for a wide composition range: 0 ≤ x ≤ 1.34. From the X-ray and electron diffraction study three domains have been characterized: orthorhombic compounds with La₂CuO₄ structure for 0 ≤ x < 0.10, tetragonal oxides similar to LaSrCuO₄ for 0.10 ≤ x < 1 and several superstructures derived from the tetragonal cell ( with n = 3, 4, 4.5, 5, 6) for 1 ≤ x ≤ 1.34. The compounds corresponding to 0 < x < 1 differ from the other oxides in that they are characterized by the presence of copper with two oxidation states: + 2 and + 3. A model structure for La_0.8Sr_1.2CuλO_3.4, in which copper has only the + 2 oxidation state, and for which the actual cell is tegragonal—a = 18.80₄ Å and c = 12.94 Å—has been established. The particular structural evolution of these compounds is discussed in terms of a competition between the capability of Cu(II) to be oxidized to Cu(III) and the ordering of oxygen vacancies.     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

A study of the spinel materials LiTi2O4 and Li43Ti53O4 by photoelectron spectroscopy

HeI-excited valence-band ultraviolet photoelectron spectra and MgKα-excited Ti-2p X-ray photoelectron spectra are reported for the spinel materials LiTi₂O₄ and $\text{Li}{}_{\mathrm{<mtext>4</mtext><mtext>3</mtext>}}\text{Ti}{}_{\mathrm{<mtext>5</mtext><mtext>3</mtext>}}\text{O}{}_4$. The presence of a Fermi edge in the ultraviolet photoelectron spectrum of LiTi₂O₄ confirms the metallic nature of this material, although the measured density of states at the Fermi energy is much lower than that expected from an independent-electron interpretation of the magnetic susceptibility. This difference is attributed to a strong interaction of the conduction electrons with the lattice vibrations. The localization of conduction electrons that occurs in the final state in the Ti-2p X-ray photoelectron spectrum of LiTi₂O₄ is attributed to a Coulomb interaction with a core hole.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).